RFQ_PCR-25-1859.pdf

Department of Forestry and Fire Protection (CAL FIRE) Information Technology Services RFQ-ITS 25-1859 (Striker Ave. Video Wall 2026) May 2026

REQUEST FOR QUOTE

FOR INFORMATION TECHNOLOGY SERVICES

RFQ-ITS #: RFQ-ITS 25-1859

For (IT Services): Striker Ave. Video Wall 2026

For (Division): Fire Protection – Operations Support Program

Release Date: May 19, 2026 Due Date: June 4, 2026, by 4:00 PM Pacific Time (PT)

California Department of Forestry and Fire Protection (CAL FIRE) is inviting you to review and respond to this Request for Quote for Information Technology Services (RFQ-ITS), entitled RFQ–ITS 25-1859 Striker Ave. Video Wall 2026, hereby referred to as RFQ-ITS. To participate in this RFQ-ITS, you must comply with the instructions contained in this document as well as the requirements stated in CAL FIRE’s Scope of Work (SOW), Exhibits, and Attachments (CAL FIRE may add additional Exhibits or Attachments as needed). By submitting a bid, your firm agrees to the terms and conditions stated in this RFQ-ITS.

All Bidders must adhere to the Key Action Dates and Times set forth below. The Key Action Dates and Times may be adjusted by issuance of addenda by CAL FIRE as conditions warrant. Responses must comply with the instructions found herein. Failure to comply with any of the requirements may cause the Responses to be deemed as “non-responsive.”

Read the attached document carefully. The RFQ-ITS due date is June 4, 2026 by 4:00 PM PT. Responses to RFQ–ITS 25-1859, and any required copies must be submitted by E-mail only clearly labeled to the department contact noted below.

CONTACT INFORMATION:

CAL FIRE Procurement Official: Colette Walden

Phone: (916) 279-1666 E-mail address: Colette.Walden@fire.ca.gov

RFQ SUBMITTAL:

California Department of Forestry and Fire Protection Information Technology Services – Administration & Planning

Submit by E-Mail Only E-mail address: Colette.Walden@fire.ca.gov mailto:Colette.Walden@fire.ca.gov mailto:Colette.Walden@fire.ca.gov

A. General Information B. RFQ-ITS Written Questions C. RFQ-ITS Response Guidelines D. Confidentiality E. RFQ-ITS Response Content F. Administrative Information G. Rejection of Offers H. Evaluation Criteria I. Award of Contract J. Protest

EXHIBIT A - SCOPE OF WORK

1.0 Background and Purpose

2.0 Contract Description

3.0 Term of the Contract

4.0 Work Location

5.0 Roles and Responsibilities

6.0 Contractor Tasks and Deliverable Requirements

6.1 Audio Visual Equipment Installation

6.2 Telecommunications Work

6.3 Installation Requirements

6.4 Lift equipment

6.5 System Programming and Commissioning

7.0 Deliverable Expectation Document (DED)

8.0 Deliverable Acceptance Or Rejection

9.0 Acceptance Criteria

10.0 Reporting Requirements

11.0 Problem Escalation

11.1 Cure Notices

12.0 Contractor and Storage of Electronic Data

13.0 Security And Confidentiality

14.0 Travel

15.0 Solution Modification

16.0 Unanticipated Tasks

17.0 Termination

18.0 Contract Administrators

EXHIBIT B - BUDGET DETAIL AND PAYMENT PROVISIONS

EXHIBIT C – COST WORKSHEET

EXHIBIT D – INFORMATION TECHNOLOGY - GENERAL PROVISIONS NON-CLOUD -

COMPUTING SERVICES

EXHIBIT E - SPECIAL TERMS AND CONDITIONS

EXHIBIT F - Work Authorization Template Attachment 1 - Cover Letter Attachment 2 - Payee Data Record Form Std. 204 Attachment 3 - Customer Reference Form Attachment 4 - Confidentiality Statement Attachment 5 - Bidder Declaration (GSPD-05-0105) Attachment 6 - Commercially Useful Function (CUF) Certification Attachment 7 - Disabled Veteran Business Enterprise Declarations (STD 843) Attachment 8 - UNRUH/FHEA, California Civil Rights Laws Certification Attachment 9 – Iran Contracting Act Verification Form

A. General Information

1. Background and Purpose

2. Key Dates

Bidders are advised of the key dates and times shown below and are required to adhere to them due to time constraints:

KEY ACTION DATES & TIMES

Key Action Dates Date Time

1. Release of RFQ–ITS 25-1859 5/19/2026

2. Bidder’s submission of written questions 5/22/2026 1:00 PM PT

3. CAL FIRE’s response to written questions 5/28/2026 5:00 PM PT

4. Submission of Bids (by date and time) 6/4/2026 4:00 PM PT

5. Bid Evaluations TBD

6. Contract Award TBD

Submissions for the RFQ-ITS must be sent through email and should be received by the Due Date & Time specified in the Key Action Dates section above.

The E-mail time stamp will be used as the official receipt of the RFQ-ITS response and must be before the date and time listed in the Key Action Dates above.

If the e-mail time stamp shows received after the RFQ-ITS Offer Submission Due Date & Time, the RFQ-ITS response will be considered a material deviation and not accepted.

B. RFQ-ITS Written Questions

All questions related to this RFQ-ITS must be submitted by email to the Procurement Contact stated on page 1. Any questions received after the due date and time will not be accepted. CAL FIRE may seek clarification for any question received. Questions submitted other than by e-mail will not be accepted.

When CAL FIRE has completed its review of the questions, all the Questions and Answers (Q & A) will be sent by e-mail to all Bidders.

If a bidder wishes to participate in the RFQ-ITS, they can do so even after the question-and-answer period has ended. However, they will have to depend exclusively on the question-and-answer document that has already been published.

RFQ-ITS Question Requirements

1. RFQ-ITS Number

2. Company Name

3. Company’s Contact Name

4. Email Address

5. Telephone Number

6. Identification of the applicable RFQ-ITS section

7. Description of the question, concern, discrepancy, error, or issue

8. Additional information relevant for CAL FIRE to identify the specific issue or problem.

C. RFQ-ITS Response Guidelines

This RFQ-ITS and the Bidder’s Response to this document will be made part of the contract. Responses to this RFQ-ITS must contain all data/information requested and must conform to the format described in this RFQ-ITS. It is the Bidder’s responsibility to provide all required data and any other information deemed necessary for CAL FIRE’s evaluation team to determine and verify the bidder’s ability to perform the tasks and activities defined in the Scope of Work. CAL FIRE will review all responses to this RFQ-ITS for all administrative requirements as stated in this document, and if determined to have material deviation, this will be documented in the procurement file and the offer will not be included in the evaluation.

Exhibit A and all other Exhibits can only be changed by CAL FIRE.

The Bidder must adhere to the following when submitting a response to the RFQ-

ITS:

1. The response must have page numbers located at the bottom of each page.

2. Exhibit C - Cost Worksheet must be submitted as a separate Excel spreadsheet from the response. If any cost is incorporated in the Contractor’s technical response, this will be considered a material deviation, and the response may be rejected.

D. Confidentiality

In response to this RFQ, CAL FIRE will not accept documentation that is marked “Confidential” or “Proprietary.” All documents submitted are the property of CAL FIRE for the State of California. All documents are subject to review by, or release to the public under the California Public Records Act Government Code section 6250 et seq.

E. RFQ-ITS Response Content

The following shall be submitted in the RFQ-ITS response, unless otherwise stated below, in the order specified below. CALFIRE will review each document for completeness as pass or fail. RFQ-ITS responses that fail to follow this format may be deemed non-responsive and rejected.

a. EXHIBIT C, Cost Worksheet

Bidder must complete the Cost Worksheet that identifies total cost in accordance to Exhibit C - Cost Worksheet and submit with their response as a separate Excel spreadsheet. All line items must have costs evaluated. To Be Determined (TBD) costs may disqualify the offer.

b. Response to Exhibit A - Scope of Work The Bidder shall provide a response to the Scope of Work (SOW) stating how the Bidder will accomplish the requirements outlined in the SOW and related material.

The Bidder’s response to Exhibit A - Scope of Work will be assessed for responsiveness to requirements. The Bidder’s response must map each task item back to the Scope of Work. The response must include any additional information that the Bidder deems necessary to explain how the Bidder intends to meet CAL FIRE’s requirements. The Bidder’s response must contain the following as applicable:

i. Overview of the required tasks and outcomes,

ii. Description of how the tasks will be performed,

iii. Work plan for each task, including sub-task description, including due date for each deliverable,

iv. How the Bidder has demonstrated their ability to provide services for three similar projects using Attachment 3 - Customer Reference Form.

v. Any other requirements shown in CAL FIRE’s Scope of Work document.

c. Attachment 1, Cover Letter

Bidder shall complete and have signed by the individual authorized to bind the company contractually acknowledging that they agree to all the terms and conditions set forth in this RFQ-ITS. See Attachment 1.

d. Attachment 2, Payee Data Record (STD 204) and optional (STD 205)

A STD 204 shall be completed and signed by an appropriate and authorized individual.

STD 204 can be obtained through link listed below.

http://www.documents.dgs.ca.gov/dgs/fmc/pdf/std204.pdf

Required if Bidder’s remittance address is different than the mailing address on the STD 204, complete and submit the Payee Data Record Supplement Form, STD 205 if applicable.

STD 205 Payee Data Record Supplement

e. Attachment 3, Customer Reference Form The Bidder shall submit a minimum of three (3) references to validate experience providing services for customer projects with similar scope, schedule, and resources to this project.

http://www.documents.dgs.ca.gov/dgs/fmc/pdf/std204.pdf https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.documents.dgs.ca.gov%2Fdgs%2Ffmc%2Fpdf%2Fstd205.pdf&data=04%7C01%7Ckristine.vankeuren%40STATE.CA.GOV%7Ce30a331f9dd1456a14c108d8f9f3376e%7C52b26be47f5d4e1cbaed8cf75b7570d5%7C0%7C0%7C637534170461433575%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=AvffAGpU14ub1p8KTkMqXPWxSM6j0VzjwKzXomkTOD0%3D&reserved=0

The Bidder shall complete an Attachment 3 - Customer Reference Form for each reference. The description of each project must be detailed and comprehensive enough to permit CAL FIRE to assess the similarity of the projects to the work anticipated in the award of a resulting Agreement.

CAL FIRE reserves the right to contact customer references post-submission to verify the information submitted by the Bidder. Consequently, it is advisable for the bidder to verify the accuracy of their referenced customers' contact details on Attachment 3 and confirm their availability during the period when CAL FIRE will be conducting reference validation.

f. Attachment 4, Confidentiality Statement Bidder shall complete and sign Attachment 4 - Confidentiality Statement.

g. Attachment 5, Bidder Declaration (GSPD-05-105) Bidder shall complete Attachment 5 – Bidder Declaration. When completing the Bidder Declaration, all subcontractors proposed for participation in the contract must be identified. See link below:

https://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/gspd05-105.pdf

h. Attachment 6, Commercial Useful Function (CUF) Evaluation Form Bidders claiming SB/DVBE status shall complete the CUF form. CUF is defined pursuant to MVC section 999(b)(5)(B) and Government Code section 14837(d)(4)(A) for the DVBE and SB programs, respectively. See Attachment 6 or see link below:

https://www.documents.dgs.ca.gov/dgs/fmc/dgs/OBAS201.pdf

i. Attachment 7, Disabled Veteran Business Enterprise Declarations (STD 843) Bidders claiming DVBE status shall complete the DVBE Declaration form.

See Attachment 7 or see link below:

https://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/pd_843.pdf

j. Attachment 8, UNRUH/FHEA, California Civil Rights Laws Certification

Pursuant to PCC § 2010, a person that submits a bid or proposal or otherwise proposes to enter into or renew a contract with, a state agency with respect to any contract in the amount of one hundred thousand dollars ($100,000) or more shall certify, under penalty of perjury, at the time the bid or proposal is submitted, or the contract is renewed must complete Attachment 8. See link below.

https://www.dgs.ca.gov/-/media/Divisions/OLS/Forms/CALIFORNIA-CIVIL- RIGHTS-LAWS-ATTACHMENT.pdf

k. Attachment 9, Iran Contracting Act Verification Form If the bid amount is one million dollars ($1,000,000.00) or more, the Bidder must submit the Iran Contracting Act Verification Form with bid response. See link below.

https://www.dgs.ca.gov/- /media/Divisions/PD/PTCS/OPPL/SCM/Iran_Contracting_Act_Verification_For m.pdf https://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/gspd05-105.pdf https://leginfo.legislature.ca.gov/faces/codes_displayText.xhtml?lawCode=MVC&division=4.&title=&part=&chapter=6.&article=6.

https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?sectionNum=14837.&lawCode=GOV https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?sectionNum=14837.&lawCode=GOV https://www.documents.dgs.ca.gov/dgs/fmc/dgs/OBAS201.pdf https://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/pd_843.pdf https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?sectionNum=2010.&lawCode=PCC https://www.dgs.ca.gov/-/media/Divisions/OLS/Forms/CALIFORNIA-CIVIL-RIGHTS-LAWS-ATTACHMENT.pdf https://www.dgs.ca.gov/-/media/Divisions/OLS/Forms/CALIFORNIA-CIVIL-RIGHTS-LAWS-ATTACHMENT.pdf https://www.dgs.ca.gov/-/media/Divisions/PD/PTCS/OPPL/SCM/Iran_Contracting_Act_Verification_Form.pdf https://www.dgs.ca.gov/-/media/Divisions/PD/PTCS/OPPL/SCM/Iran_Contracting_Act_Verification_Form.pdf https://www.dgs.ca.gov/-/media/Divisions/PD/PTCS/OPPL/SCM/Iran_Contracting_Act_Verification_Form.pdf

F. Administrative Information

a. RFQ-ITS and Bidder’s Response The RFQ-ITS and Bidder’s response will be incorporated by reference into the resulting contract.

b. Tiebreaker In the event of a tie between lowest cost or highest scoring Bidders, a coin toss shall be conducted in the presence of witnesses. Bidders will be invited to witness the coin toss, in addition CAL FIRE staff witnesses will also be present.

Note: In the event of a precise tie between suppliers claiming the incentive, the bid of an SB and the bid of a DVBE that is also a SB, the award shall go to the DVBE that is also an SB.

c. Public Records Act (PRA) Requests Upon award, all documents submitted in response to this RFQ-ITS will become the property of the State of California and will be regarded as public records under the California PRA (GC § 6250 et. seq.) and subject to review by the public.

d. Prime Contractor’s DVBE Subcontracting Reporting Requirements Military and Veteran Code (MVC) 999.5(d), 999.7 and GC 14841, and California Code of Regulations (CCR) 1896.78(e) requires all Prime Contractors that had a Disabled Veteran Business Enterprise (DVBE) firm perform any element of work for a contract to report DVBE information.

e. Plastic Trash Bag Certification Violations Public Resources Code §42290 et seq. prohibits CAL FIRE from contracting with any supplier, manufacturer, or wholesaler, and any of its divisions, subsidiaries, or successors that have been determined to be noncompliant to the recycled content plastic trash bag certification requirements. This includes award of a state contract or subcontract or renewal, extension, or modification of an existing contract or subcontract. Prior to award CAL FIRE shall ascertain if the intended awardee or proposed subcontractor is a business identified on the current CalRecycle noncompliant list(s). In the event of any doubt of the status or identity of the business in violation, CAL FIRE will notify the Board of the proposed award and afford the Board the opportunity to advise CAL FIRE. No award will be made when either the bidder or a subcontractor has been identified either by published list or by advice from the Board, to be in violation of certification requirements.

f. GC 12990 and Non-Discrimination (not required for services, only goods purchases):

Any employer who wishes to contract with CAL FIRE for goods is subject to the provisions of GC 12990 relating to discrimination in employment. Contractors that do not meet the provisions of GC 12990 are not eligible to contract with CAL FIRE for IT goods. Ineligible Contractors are found in the California Regulatory Notice Register. To access the California Regulatory Notice Register, see link below: https://oal.ca.gov/publications/notice_register/ https://www.treasurer.ca.gov/ctcac/compliance/manual/appendix1/code.pdf https://leginfo.legislature.ca.gov/faces/codes_displayText.xhtml?lawCode=MVC&division=4.&title=&part=&chapter=6.&article=6.

https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?sectionNum=14841.&lawCode=GOV https://www.dgs.ca.gov/-/media/Divisions/PD/OSDS/Certification/SB/Final-SB_DVBE-Regulation-Text.pdf?la=en&hash=905752DB4D5BD9E6D473B2889F5E03A31E17D97C https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?sectionNum=42290&lawCode=PRC https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?sectionNum=12990&lawCode=GOV https://oal.ca.gov/publications/notice_register/

g. Executive Order N-6-22 – Russia Sanctions On March 4, 2022, Governor Gavin Newsom issued Executive Order N-6-22 (the EO) regarding Economic Sanctions against Russia and Russian entities and individuals. “Economic Sanctions” refers to sanctions imposed by the U.S.

government in response to Russia’s actions in Ukraine, as well as any sanctions imposed under state law. By submitting a bid or proposal, Contractor represents that it is not a target of Economic Sanctions. Should CAL FIRE determine Contractor is a target of Economic Sanctions or is conducting prohibited transactions with sanctioned individuals or entities, that shall be grounds for rejection of the Contractor’s bid/proposal any time prior to contract execution, or, if determined after contract execution, shall be grounds for termination by CAL

FIRE.

h. Security and Data Protection Requirements

CAL FIRE must ensure agreements with state and non-state entities include provisions which protect and minimize risk to the state when engaging in the development, use, or maintenance of information systems, products, solutions, or services. In order to comply with the State Administrative Manual (SAM) Section 5305.8c, bidders must comply with Exhibit A, Section 13.0 Security and Confidentiality.

i. TACPA – (Required for contracts that will exceed $100,000.)

The TACPA preference will be granted if this solicitation is an Information Technology (IT) procurement valued at $100,000 and greater. The State will give preferences in accordance with the GC 4530-4535.3, for bidders who are California home based and who qualify for claimed preferences under the Target Area Contract Preference Act (TACPA) by computing and returning the appropriate forms described in the RFQ. Where multiple preferences are claimed, the State will verify eligibility for the preferences and evaluate and apply preferences in accordance with the law.

Available evaluation preferences under TACPA are limited to nine percent (9%), five percent (5%) worksite, and one percent (1%) up to four percent (4%) workforce of the lowest total proposal price or $50,000.00, whichever is less.

The TACPA preference is a dollar preference, applied against the Bidder’s proposed cost, before cost is evaluated and converted to points.

The State will verify Target Area Contract Preference Act (TACPA) preference and apply the TACPA Preference accordingly. The TACPA preference does not apply when the worksite is fixed by the terms of the Contract.

Any questions regarding the TACPA preference should be directed to the Department of General Services, Procurement Division at TACPA@dgs.ca.gov or (916) 375-5000.

Contracts excluded from this Preference Program include construction contracts and contracts with designated worksite. Bidders wishing to take advantage of this preference are required to submit the following applications/forms:

TACPA (Std. 830) TACPA preference request (STD.830).

Bidder’s Summary of Contract Activities and Labor Hours (DGS/PD 525) Bidder's Summary of Contract Activities and Labor Hours (goods and services) https://www.gov.ca.gov/wp-content/uploads/2022/03/3.4.22-Russia-Ukraine-Executive-Order.pdf https://www.dgs.ca.gov/Resources/SAM/TOC/5300/5305-8 http://www.documents.dgs.ca.gov/dgs/fmc/pdf/std830.pdf https://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/gspd0525.pdf

Manufacturer Summary of Contract Activities and Labor Hours (DGS/PD 526) Manufacturer Summary of Contract Activities and Labor Hours (goods)

j. Generative Artificial Intelligence (GEN AI)

The State of California seeks to realize the potential benefits of GenAI, through the development and deployment of GenAI, while balancing the risks of these technologies.

Bidder must notify the State in writing if it: (1) intends to provide GenAI as a deliverable to the State; or (2), intends to utilize GenAI, including GenAI from third parties, to complete all or a portion of any deliverable that materially impacts: (i) functionality of a State system, (ii) risk to the State, or (iii) Contract performance. For avoidance of doubt, the term "materially impacts" shall have the meaning set forth in State Administrative Manual (SAM) 4986.2.

Failure to report GenAI to the State may result in disqualification. The State reserves its right to seek any and all relief it may be entitled to as a result of such non-disclosure. Upon notification by a Bidder of GenAI as required, the state reserves the right to incorporate GenAI Special Provisions into the final contract or reject bids that present an unacceptable level of risk to the state.

Government Code 11549.64 defines “Generative Artificial Intelligence (GenAI)” as an artificial intelligence system that can generate derived synthetic content, including text, images, video, and audio that emulates the structure and characteristics of the system’s training data.

k. Small Business Regulations

The Small Business (SB) regulations pursuant to the California Code of Regulations (Title 2, Division 2, Chapter 3, Subchapter 8, section 1896 et seq.)

concerning the application and calculation of the SB preference, SB certification, responsibilities of SBs, department certification, and appeals can be viewed at (https://www.dgs.ca.gov/PD/Resources/Page-Content/Procurement-Division- Resources-List-Folder/Notice-of-Rulemaking-Regulations-for-SB DVBE?search=sb%20peference). Access the regulations by clicking on “Notice of Rulemaking” in the right sidebar. For those without Internet access, a copy of the regulations can be obtained by calling the DGS Office of SB and DVBE Services (OSDS) at (916) 375-4940.

l. Small Business Preference

The respondents claiming the small business preference must be certified by California as a small business. A 5% preference will be available to California certified SB. This preference must be claimed by completing the Bidder Declaration form GSPD-05-105, Attachment 5.

All certified SBs must perform a “commercially useful function” (CUF) in the performance of the contract, as defined in Government Code section 14837(d)(4). See Attachment 6.

https://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/gspd0526.pdf https://www.dgs.ca.gov/Resources/SAM/TOC/4900/4986-2 https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?lawCode=GOV&sectionNum=11549.64.&highlight=true&keyword=Generative%20Artificial%20Intelligence https://www.dgs.ca.gov/PD/Resources/Page-Content/Procurement-Division-Resources-List-Folder/Notice-of-Rulemaking-Regulations-for-SB%20DVBE?search=sb%20peference https://www.dgs.ca.gov/PD/Resources/Page-Content/Procurement-Division-Resources-List-Folder/Notice-of-Rulemaking-Regulations-for-SB%20DVBE?search=sb%20peference https://www.dgs.ca.gov/PD/Resources/Page-Content/Procurement-Division-Resources-List-Folder/Notice-of-Rulemaking-Regulations-for-SB%20DVBE?search=sb%20peference

Certification applications and required support documents must be submitted to the OSDS no later than 5:00 p.m. on the RFQ due date; and the OSDS must be able to approve the application as submitted. Respondents may contact the OSDS for any information or questions concerning certification.

m. Non-SB Subcontracting Preference

A 5% preference is also available to a non-small business claiming 25% California certified SB sub-contractor participation. This preference must be claimed by completing the Bidder Declaration form GSPD-05-105, Attachment

5. The form must list all California certified SBs with which you commit to sub-contract with for an amount of at least 25% of the net contract price.

All certified SBs must perform a “commercially useful function” (CUF) in the performance of the contract, as defined in Government Code section 14837(d)(4). See Attachment 6.

n. Small Business Nonprofit Veteran Service Agencies (SB/NVSA)

SB/NVSA prime offerors meeting requirements specified in the Military and Veterans Code Section 999.50 et seq. and obtaining a California certification as a small business are eligible for the 5% small business preference. This preference must be claimed by completing the Bidder Declaration form GSPD- 05-105, Attachment 5.

o. DVBE Participation Requirement

The State has established a 3% goal for Disabled Veteran Business Enterprises (DVBE) participating in State contracts. If claiming DVBE status the bidder must document their commitment to full DVBE participation or a percentage of the work. This applies to all contracts regardless of the solicitation format used. For the purpose of this solicitation, the DVBE participation requirement may be waived.

p. DVBE Incentive

In accordance with Section 999.5(a) of the Military and Veterans Code (MVC) an incentive will be given to respondents who provide DVBE participation. For evaluation purposes only, CAL FIRE will apply an incentive based on the amount of DVBE participation obtained above three percent (3%) as identified on the Bidder Declaration GSPD-05-105, Attachment 5 and confirmed by the

CAL FIRE.

If the Contractor is claiming a DVBE incentive, the Bidder must complete Attachment 5 – Bidder Declaration (GSPD-05-105), Attachment 6 – Commercial Useful Function (CUF) Evaluation Form, and Attachment 7 – Disabled Veteran Business Enterprise Declaration (STD. 843).

For awards based on low price, the net quote price of the responsive quote will be reduced (for evaluation purposes only) by the amount of DVBE incentive as applied to the lowest responsive net quote price. If the #1 ranked responsive, responsible quote is a California certified small business, the only bidders eligible for the DVBE incentive will be California certified small businesses. For awards based on highest points, the DVBE incentive percentage will be applied to the total points earned by the bidder. The following illustrates the incentive percentage available based on the Bidder’s confirmed percent of DVBE participation.

CONFIRMED DVBE

PARTICIPATION OF

DVBE INCENTIVE

5% and above 5%

4% - 4.99% 4%

3% - 3.99% 3%

G. Rejection of Offers

Deviations may cause a bid to be deemed non-responsive and not to be considered for award. CAL FIRE may reject any or all bids and/or may waive any immaterial deviation or defect in an bid. CAL FIRE's waiver of any immaterial deviation or defect shall in no way modify the RFQ-ITS documents or requirements and shall not excuse the Contractor from full compliance with the RFQ-ITS specifications if awarded a contract.

Final bids not received by the date and time specified in key action dates, will remain unopened and will be maintained separately from bids that have been timely received. Bids received after expiration of the deadline may only be opened and considered upon written approval of CAL FIRE’s management or their designee specifying the reason(s) for acceptance and consideration of the untimely bid.

Issuance of this RFQ-ITS in no way constitutes a commitment by CAL FIRE to award a contract. CAL FIRE reserves the right to reject any or all bids, or portions of bids, received in response to this RFQ-ITS, or to amend or cancel this RFQ-ITS at any time. In the event of such cancellation, CAL FIRE may reissue the RFQ-ITS at a later date.

CAL FIRE reserves the right to consider Bidder’s past performance with CAL FIRE in its selection of a Contractor pursuant to this RFQ-ITS.

1. Non-Responsive Offers

A bid may be deemed non-responsive and subsequently rejected if any of the following occur:

a. A submission is received after the exact time and date set forth in the Key Action Dates for receipt of each submission.

b. The Bidder fails to submit or fails to complete and sign any required Attachments as instructed in this RFQ-ITS.

c. The submission contains false, inaccurate, or misleading statements or references.

d. The Bidder is unwilling or unable to fully comply with the proposed contract provisions.

e. The Bidder supplies conditional cost information, incomplete cost information, or cost information containing unsigned/uninitiated alterations or irregularities.

2. Business In Good Standing

Bidder acknowledges that when agreements are to be performed in the State of California by corporations or vendors, CAL FIRE will verify, prior to awarding any State contract, the following information in order to ensure that all obligations due to the State are fulfilled.

3. Corporation in Good Standing

CAL FIRE will verify with the California Secretary of State (SOS) that the Bidder is a corporation currently qualified to do business in California.

The bid may be considered non-responsive if the Bidder is not listed with

SOS.

“Doing business” is defined in California Revenue and Taxation Code section 23101 as actively engaging in any transaction for the purpose of financial or pecuniary gain or profit. Although there are some statutory exceptions to taxation, rarely will a corporate contractor performing within the State not be subject to the franchise tax.

Both domestic and foreign (those incorporated outside of California) corporations must be in good standing in order to be qualified to do business in California.

4. State Tax Delinquency

CAL FIRE will verify with the California Franchise Tax Board (FTB) and California Department of Tax and Fee Administration (CDTFA) that the Bidder is not on a prohibited list due to tax delinquencies. The bid will be considered non-responsive if the Contractor is on any of these lists.

The list established by FTB can be found at:

Top 500 past due balances | FTB.ca.gov

The list established by CDTFA can be found at:

Top 500 Sales & Use Tax Delinquencies in California https://www.ftb.ca.gov/about-ftb/newsroom/top-500-past-due-balances/corporate-income-tax-list.html https://www.cdtfa.ca.gov/taxes-and-fees/top500.htm

H. Evaluation Criteria

The overall responsiveness of each RFQ-ITS response is based on the complete response from the Bidder to the RFQ-ITS requirements, including the scope of work for the project. The following sub-sections and criteria will be reviewed by CAL FIRE’s evaluation team.

1. Administrative Requirements Evaluation Criteria (Pass/Fail)

Example:

Requirement Pass Fail N/A

a. Cover Letter (Attachment 1)

b. Payee Data Record (Attachment 2)

c. Customer Reference Forms (Attachment 3)

d. Confidentiality Statement (Attachment 4)

e. Bidder Declaration (Attachment 5)

f. CUF Evaluation Form (Attachment 6)

g. DVBE Declaration (Attachment 7)

h. Civil Rights Laws Certification (Attachment 8)

i. Iran Contracting Act Verification Form

(Attachment 9)

2. Technical Requirements Evaluation Criteria (60 points)

The technical evaluation criteria will be scored on a scale of 0 through 60 based on references and proposed solution outlined in the Bidder’s response to Exhibit A - Scope of Work.

3. Cost (Exhibit E) (40 points)

Cost will be evaluated at 40 points of the total available points. Bid submittals responsive to all requirements will have their cost evaluated. The required Cost Worksheet will be checked for mathematical accuracy and CAL FIRE reserves the right to make mathematical corrections and/or ask clarifying questions. The Bidders will be evaluated on the total extended cost for both the contracted term and including any optional extension years. All cost lines must be completed.

Each bidder cost score will be calculated based on the ratio of the lowest cost proposal to the bidders cost, multiplied by the maximum number of cost points available (40), as shown in the calculation below:

Lowest Total Cost Bid X Total cost points available Bidder Total Cost

Example: To help illustrate this process, refer to table below, for an example of the cost score calculation process. Cost figures in the example below explain the calculations and have no other significance.

Cost Evaluation and Scoring Methodology Example Bidder Grand Total

Cost Calculation Cost Points

Awarded A $400,000 $300,000 X 40

$400,000

B $350,000 $300,000 X 40 $350,000

C $300,000 $300,000 X 40 $300,000

4. Final Scoring Example

Example:

BIDDER A BIDDER B BIDDER C

Responsive & responsible Yes Yes Yes Eligible preference None SB None Technical Score 53 58 56 Score based on price bid 30 34 40 Total Score 83 92 96 Rank 3 2 1 Preference Amount 4.8 Final Score 82 96.8 96 Final Rank 3 1 2

The preference calculation is performed as follows:

1. Identify the total score of the #1 ranked bidder (Bidder C at 96).

2. Determine the preference amount (96 X .05 = 4.8).

3. Add the preference amount to the total score of bids eligible to receive the preference (Bidder B: 82 + 4.8 = 96.8).

The award is to Bidder B in this example.

I. Award of Contract

Award of contract, if made, will be in accordance with the RFQ information on Evaluation to a responsible Bidder whose bid complies with all the requirements of the RFQ documents and an addenda thereto, except for such immaterial defects as may be waived by the State. Award, if made, will be made within forty-five (45) days after the scheduled date for Contract Award or Bid Submission Date as specified in the RFQ; however, a bidder may extend the offer beyond 45 days in the event of a delay of contract award.

The State reserves the right to determine the successful bidder(s) either on the basis of individual items or on the basis of all items included in its RFQ, unless otherwise expressly provided in the State’s RFQ. Unless the bidder specifies otherwise in its bid, the State may accept any item or group of items of any bid. The State reserves the right to modify or cancel in whole or in part it’s RFQ.

Written notification of the State’s intent to award will be made to all bidders. If a bidder, having submitted a bid, can show that its bid, instead of the bid selected by the State, should be selected for contract award, the bidder will be allowed five (5) working days to submit a Notice of Intent to Protest, according to the instructions contained in the paragraph titled “Protests” of this RFQ.

J. Protest

Any Bidder issues regarding solicitation requirements must be resolved (or attempts to resolve them must have been made) before a protest may be submitted according to the procedure below. These issues will first be resolved by the contact for the solicitation or if they result in a protest, the protest will be submitted to DGS Procurement Division Deputy Director to hear and resolve issues and whose decision will be final.

If a Bidder has submitted a bid which it believes to be totally responsive to the requirements of the RFQ and to be the bid that should have been selected according to the evaluation procedure in the solicitation section on Evaluation and the Bidder believes the State has incorrectly selected another Bidder for award, the Bidder may submit a protest of the selection as described below. Protests regarding selection of the “successful Contractor” will be heard and resolved by the Victim Compensation and Government Claims Board whose decision will be final.

All protests of award must be made in writing, signed by an individual authorized to bind the Bidder contractually and financially, and contain a statement of the reason(s) for protest; citing the law, rule, regulation, or procedure on which the protest is based. The protester must provide facts and evidence to support the claim. Protests must be mailed or delivered to:

Street and Mailing Address:

Deputy Director Procurement Division 707 Third Street, Second Floor South West Sacramento, CA 95605 Facsimile No.: (916) 375-4611

All protests to the RFQ-ITS or protests concerning the evaluation, recommendation, or other aspects of the selection process must be received by the DGS Procurement Division Deputy Director as promptly as possible, but no later than the date indicated in the Intent to Award letter. Certified or registered mail must be utilized unless delivered in person, in which case the protester should obtain a receipt of delivery.

EXHIBIT A - SCOPE OF WORK

1.0 Background and Purpose

CAL FIRE seeks to enhance situational awareness, operational readiness, and emergency response coordination at the new CAL FIRE office location by installing a video wall capable of displaying real-time weather data, fire conditions, incident activity, mapping systems, and other critical operational information to support decision-making and daily emergency operations.

2.0 Contract Description

This Agreement is entered into between the California Department of Forestry and Fire Protection, hereafter referred to as CAL FIRE, and (Contractor name) hereafter referred to as Contractor. This contract is for Contractor to provide all labor, materials, equipment, programming, testing, and installation services necessary to complete the audio visual video wall system and supporting telecommunications infrastructure at CAL FIRE’s facility located at 1227 Striker Ave., Suites 240 & 260, Sacramento, CA 95834.

3.0 Term of the Contract

The term of this contract is one (1) year from the date the agreement is signed and executed by both parties. The Agreement can be amended for time, tasks, and funding at current contract rates specified in Exhibit C - Cost Worksheet upon mutual agreement of both parties.

The Contractor shall not be authorized to deliver goods or commence performance of services described in this Agreement prior to the date the contract is awarded.

Any delivery of goods or performance of services by the Contractor that is commenced prior to the Effective Date shall be considered gratuitous on the part of the Contractor.

4.0 Work Location

All installation, cabling, mounting, testing, programming, and end-user training services shall be performed onsite at CAL FIRE’s facility located at 1227 Striker Ave., Suites 240 & 260, Sacramento, CA 95834.

5.0 Roles and Responsibilities

A. CAL FIRE Responsibilities

1. Provide access to the installation site, coordinate electrical vendor activities for dedicated video wall outlets, and designate personnel for receiving end-user training.

2. CAL FIRE will provide data, documentation, consultation, information, and feedback to the Contractor.

3. CAL FIRE will regularly monitor Contractor activities through the exchange of detailed weekly written status reports.

4. CAL FIRE will provide all policies and procedures regarding access to and the use of the state facilities when applicable.

5. CAL FIRE will provide a delivery location for electronic data.

B. Contractor Responsibilities

1. The Contractor shall work in partnership with CAL FIRE Striker Ave. Video Wall 2026 Project team to ensure the preceding goals for this project are met by end of contract.

2. Provide all labor, materials, and equipment necessary for installation of the video wall and telecommunications components.

3. Contractor shall coordinate with CAL FIRE Project Manager to schedule work activities that require CAL FIRE staff involvement.

4. Coordinate with electrical vendor as needed.

5. Provide system programming, testing, commissioning, and end-user training.

6. Provide documentation and cable test results upon completion.

7. Contractor shall produce documentation to provide to CAL FIRE staff:

a. Provide a weekly status update on current projects.

b. Provide a quarterly overview, as applicable, of all assigned work for the previous three (3) months.

8. Contractor shall train CAL FIRE staff to ensure knowledge transfer upon completion of contract.

6.0 Contractor Tasks and Deliverable Requirements

6.1 Audio Visual Equipment Installation

Contractor shall furnish and install:

Sixteen (16) Samsung VM55B-U 55” video wall displays Sixteen (16) Peerless-AV DS‑VW775‑QR mounts Two (2) Atlona AT‑OMNI‑111 encoders Sixteen (16) Atlona AT‑OMNI‑121 decoders One (1) Atlona AT‑VTP‑1000VL touch panel One (1) Atlona AT‑VTP‑VTM tabletop mount One (1) Atlona AT‑VGW‑HW‑T2 controller One (1) Netgear GSM4248PX M4250 AV switch One (1) Netgear JGS524NA switch One (1) Panduit 24‑port patch panel One (1) Panduit WMP1E wire manager One (1) NavePoint wall‑mount swing rack Nineteen (19) Cat6A connectors Required Cat6A, HDMI, and patch cables

6.2 Telecommunications Work

Contractor shall:

Provide and install two (2) Category 6 riser cables to warehouse locations Install eight (8) Category 6 connectors with faceplates

Perform cable testing and deliver test reports

6.3 Installation Requirements

Contractor shall:

Provide and install 128 ft of deep-channel Unistrut Mount Unistrut through steel studs using toggle bolts Attach display brackets to Unistrut Mount displays securely according to manufacturer guidelines Follow all safety codes

6.4 Lift equipment

Contractor shall provide a scissor lift or any other lift equipment required to complete the installation. The cost to supply or rent such lift equipment may be included in the Contractor’s bid and listed in the Cost Worksheet; however, CAL FIRE is not purchasing the lift equipment itself. All lift equipment shall remain the property or rental responsibility of the Contractor.

6.5 System Programming and Commissioning

Contractor shall:

Perform programming of AV systems Conduct full testing and commissioning Provide end-user training

7.0 Deliverable Expectation Document (DED)

The Contractor will develop a DED form and process that will include the information the Contractor will need to complete each tasks deliverable(s). CAL FIRE’s requirements for the form are:

1. All work performed under this contract shall be initiated using a

Deliverable Expectation Document (DED) with tracking number assigned by CAL FIRE.

2. The DED establishes a common understanding of items listed below. CAL FIRE and Contractor will define and develop acceptance criteria, including specific, measurable success factors, to be set forth in the DED. The DED details Contractor services required to meet project objectives including (as applicable):

a. Scope,

b. schedule,

c. format, content (depth and breadth)

d. estimated hours per task by personnel member,

e. cost, and

f. acceptance criteria of work products required prior to the Contractor beginning work.

g. Start and Stop date for the DED.

h. Signature block for:

i. Contractor Contract Official,

ii. CAL FIRE Project Manager

i. CAL FIRE and Contractor must sign the DED before work starts on each task listed on the DED.

3. All changes to the DED must be in writing and go through the approval process (signature) prior to work being performed. Any additional cost must be submitted on the DED and approved by CAL FIRE.

4. The start of work will occur upon the start date of the DED or upon approval by the CAL FIRE IT Acquisitions Manager, whichever occurs later.

5. It is understood and agreed by both parties that all of the terms and conditions of this contract shall remain in force with the inclusion of any such approved DED.

6. CAL FIRE has the right to require the Contractor to stop or suspend work on any previously approved DED.

7. CAL FIRE will pay based on the hourly rates in accordance with Exhibit C - Cost worksheet, but no more than the agreed number of hours shown on the CAL FIRE approved DED.

8. If, in the performance of the work, the Contractor determines that the work approved through the DED cannot be accomplished within the estimated hours, the Contractor will immediately notify the CAL FIRE Project Manager in writing of the Contractor's estimate of the additional hours to complete the work in full. Upon receipt of such notification, CAL FIRE may:

a. Alter the scope of the DED, via an approved amendment to the DED, in order to define tasks that can be accomplished within the remaining estimated hours by issuance of an approved DED amendment, or

b. Terminate the DED.

8.0 Deliverable Acceptance Or Rejection

Contractor working with CAL FIRE shall develop an Acceptance or Rejection Form. All work shall be submitted to the CAL FIRE Project Manager for review and approval or rejection with the following process:

1. The Contractor will submit each deliverable with level of detail and quality consistent with the DED approved by CAL FIRE.

2. A signed Deliverable Acceptance Document (DAD) is required from the

CAL FIRE Project Manager before processing an invoice for payment.

The DAD must accompany any invoice submitted by the Contractor.

Should deficiencies be identified in a deliverable, CAL FIRE and the Contractor will meet to determine what work products are acceptable and the level of effort and strategy for correction of any deficiencies. CAL FIRE may issue a DAD for a portion of the Deliverable. CAL FIRE and the Contractor will document the strategy and level of effort for the Contractor’s correction of deficiencies through an amended DED.

3. Payment for tasks performed under this contract shall be by deliverable. It shall be CAL FIRE’s sole determination as to whether a deliverable has been successfully completed and is acceptable to CAL

FIRE.

4. Deliverables include fully installed and operational video wall system, telecommunications testing documentation, programming configuration files, and end-user training completion.

9.0 Acceptance Criteria

It shall be CAL FIRE’s sole determination as to whether a deliverable has been successfully completed and acceptable by CAL FIRE. There must be a signed acceptance document for each deliverable before invoices can be processed for payment. Acceptance requires confirmation of operational video wall functionality, successful encoder/decoder performance, validated network switch configuration, and verified cable testing results.

Acceptance criteria shall consist of the following:

1. Reports on written deliverables are completed as specified and approved.

2. All deliverables must be in a format that can be used by the CAL FIRE.

3. If a deliverable is not accepted, CAL FIRE shall provide the rationale in writing within ten business days of receipt of the deliverable or upon completion of acceptance testing period.

10.0 Reporting Requirements

1. Contractor personnel must submit monthly timesheets.

2. Timesheets need to be attached to invoices and submitted to CAL FIRE contract administrator and bill-to contact.

3. Contractor must use staff classification and hourly rate for the invoice. If broken down by phases or task, they must identify which phase or task they are working on.

4. Invoices must have the contract number and Purchase Order number within the header of each invoice.

5. The Contractor must prepare a monthly/weekly written status report to the CAL

FIRE’s Project Manager and Contract Administrator with current status and future activities. This report shall include, but not be limited to the following information:

a. A summary of the work completed during the reporting period, including the identity of the person doing the work and the deliverable or task to which the work is attributable.

b. A summary of the work planned for the next reporting period, including the identity of the person doing the work and the deliverable or task to which the work is attributable.

c. The status of the over-all project, including all phases and tasks, and including a discussion regarding each problem encountered and solutions implemented or proposed.

d. List and description of issues encountered during the reporting period.

11.0 Problem Escalation

The parties acknowledge and agree that certain technical and/or project-related problems or issues may arise, and that such matters shall be brought to the State’s attention. Problems or issues shall normally be reported in regular status reports or in-person meetings. However, there may be instances where the severity of the problem justifies escalated reporting. To this extent, the CAL FIRE Project Manager in charge shall determine the level of severity, and notify the appropriate State personnel, as set forth below. The State personnel notified, and the time period taken to report the problem or issue shall be at a level commensurate with the severity of the problem or issue. The escalation steps are as follows:

A. 1st level of escalation:

1. Problem or issue (deviation) is identified by CAL FIRE, or the Contractor as follows:

a. Project output, samples, or Product Enhancements are not consistent with the requested status or quality, or

b. Exceeded deadlines, or

c. Services by CAL FIRE or Contractor is not efficient or were not implemented.

2. Action(s):

Telephone call with Contractor and CAL FIRE Project Manager about the deviation and approach for resolution.

3. Consequence(s):

a. Define necessary actions for deviation troubleshooting, resolution, and completion time.

b. Monitoring of status reports concerning deviation.

If actions are processed and successful at 1st level of escalation, no further process shall follow. If actions are deemed unsuccessful by CAL FIRE or the Contractor, proceed to the 2nd level of escalation.

B. 2nd level of escalation:

1. Problem or issue (deviation) is identified by CAL FIRE or the Contractor as follows:

Declaration by CAL FIRE or Contractor that 1st level of escalation was not effective.

2. Action(s):

Meeting with Contractor’s Senior Management and CAL FIRE Project Manager about the deviation and…