RFQ Package.pdf

REQUEST FOR QUOTE

JOINT BASE SAN ANTONIO (JBSA) - FORT SAM HOUSTON (FSH)

BRAND NAME – EVAPCO CLOSED-CIRCUIT FLUID COOLING TOWER

(THE QUOTE SHALL BE EFFECTIVE 60 DAYS AFTER SUBMISSION)

P a g e 1 | 4

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice.

This announcement constitutes the only solicitation; proposals are being requested, and a written solicitation will not be issued. The solicitation number is FA301625Q0226 and is issued as a Request for Quote (RFQ).

This solicitation incorporates provisions and clauses those in effect through Federal Acquisition Circular 2025- 05, effective 08/07/2025, DFARS change notice 01/17/2025 and DAFFARS Change 10/16/2024.

The contractor is required to purchase and deliver a brand-name EVAPCO two-cell-induced draft, counterflow closed-circuit fluid cooler (Model No. ATW 238-3J-2, Serial No. M014744) to JBSA FSH. This cooler will serve as a direct replacement for the existing unit to ensure compatibility and continuous operation of the HVAC system supporting Air Force student housing. This requirement covers the purchase and delivery of the unit only; installation is not included.

This purchase is being solicited as “Other than Full and Open.”

The NAICS code is 333415 Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial

Refrigeration Equipment Manufacturing, PSC 4120 Air Conditioning Equipment and the size standard is 1250

Employees.

QUESTIONS: All questions must be submitted in writing to both POC’s no later than Monday, 08 Sept 2025 at

10:00 AM CDT. Responses to questions will be posted on SAM.gov. Questions submitted after this date/time will not be considered.

RESPONSE DUE DATE: Respond to this RFQ by emailing your quote to both Government Point Contacts, no later than Friday, 12 September 2025, 10:00 AM CDT, to be considered timely.

• Contract Specialist - Teresa Sullivan at teresa.sullivan.4@us.af.mil

• Contract Officer - Emily Rodriguez at emily.rodriguez.8@us.af.mil

DELIVERY LOCATION:

JBSA FSH

502d Civil Engineer Squadron (502 CES)

2193 Procurement St B4197

JBSA FSH, TX 78234

PLEASE PROVIDE CONTRACTOR INFORMATION BELOW:

DELIVERY TERMS: F.O.B. DESTINATION

PAYMENT TERMS: NET 30 ___________ DISCOUNT: ________________________________________

COMPANY NAME: CAGE/UEI: _____________________________________

POC: ______________________________TELEPHONE #____ ________________________________

E-MAIL: _______________________________TAX ID: _________________________________________

WARRANTY INFORMATION: __________________________________________________________________

The Government utilizes Wide Area Workflow (WAWF) for electronic invoicing, receipt and acceptance.

Payment is only made through WAWF. Does your company have the capacity to invoice electronically through

WAWF? (Yes/No): ____________________________________________________________ mailto:teresa.sullivan.4@us.af.mil mailto:emily.rodriguez.8@us.af.mil

BRAND NAME – EVAPCO CLOSED-CIRCUIT FLUID COOLING TOWER

(THE QUOTE SHALL BE EFFECTIVE 60 DAYS AFTER SUBMISSION)

P a g e 2 | 4

FAR 52.212-1 INSTRUCTIONS TO OFFERORS - COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES.

The following addendum applies to the provision:

(1) Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse a quoter for any costs.

(2) The following addendum applies to the provision:

(b) Submission of a quote:

The paragraph is tailored as follows:

“(1) By responding to this RFQ, the quoter accepts all terms and conditions contained herein.

(2) Submit signed and dated quote to the Govt POC's specified in this solicitation at or before the exact time specified in this RFQ.

(3) The quoter shall include a description of the items being quoted in sufficient detail to evaluate compliance with the requirements of the solicitation.

The contractor must include the following: MFG name, Part Number, Illustrations/Product Specifications, and/or Literature or Description."

(c) Period for Acceptance of Quotes.

The paragraph is tailored as follows:

"The quoter agrees to hold the prices in its quote firm for 60 calendar days from the date specified for receipt of quotes, unless another time period is specified in an addendum to the solicitation."

(d) Product Samples. Paragraph deleted in its entirety.

(e) Multiple Quotes. Paragraph deleted in its entirety.

(f) Late submissions, modifications, revisions, and withdrawals of quotes.

The paragraph is tailored as follows:

"Contractor shall comply with the time and date specified in this solicitation."

(g) Contract award. Paragraph deleted in its entirety.

(h) Multiple Awards. Paragraph deleted in its entirety.

(i) Availability of requirements documents cited in the solicitation. Paragraph deleted in its entirety.

(j) Unique entity identifier. Paragraph deleted in its entirety.

(k) [Reserved].

(l) Debriefing. Paragraph deleted in its entirety.

The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse a quoter for any costs.

The contractor shall not request, nor will the Government make payments for any preliminary measurement, quotes, bids, site visit, time or proposal cost incurred.

BRAND NAME – EVAPCO CLOSED-CIRCUIT FLUID COOLING TOWER

(THE QUOTE SHALL BE EFFECTIVE 60 DAYS AFTER SUBMISSION)

P a g e 3 | 4

FAR 52.212-2--EVALUATION COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES.

The following addendum applies to the provision.

502d CONS/JBKAA will issue a purchase order to the responsible quoter whose quote will be the most advantageous to the Government. The following shall be used to evaluate quotes: The lowest priced technically acceptable (LPTA) quote will be determined to represent the best value. Technical acceptability will be determined by an evaluation of the quotes requirements that meet the technical criteria that are contained in

(b) Submission of Quotes of this RFQ.

The Government will rank all quotes based on an initial assessment of the total evaluated price (TEP). If three (3) or fewer quotes are received, the Government will evaluate all quotes for technical acceptability. If more than three

(3) quotes are received, the Government will evaluate the three (3) lowest ranked quotes for technical acceptability.

However, the Government reserves the right to evaluate additional quotes for technical acceptability if deemed to be in the Government's best interest. If additional quotes are evaluated for technical acceptability, they will be evaluated in terms of price. The award will be given to the vendor responsible whose quote is the lowest evaluated price among technically acceptable quotes.

The technical evaluation team will evaluate the factors identified below. For the quote to be technically acceptable, the technical factors must be rated as Acceptable. The failure of a quote to meet any or all technical criteria will result in a technically Unacceptable rating and be ineligible for an award. The technical factors will receive one (1) of the ratings listed below:

Acceptable: Quote clearly meets the minimum requirements of the solicitation.

Unacceptable: Quote does not meet the minimum requirements of the solicitation.

Technical Factor 1 - The quoter shall provide the brand name EVAPCO Closed-Circuit Fluid Cooling Tower

(EVAPCO Model No. ATW 238-3J-2 Serial No. M014744) items/products. The brand name item will be considered Technically Acceptable. Any items quoted other than the exact brand name item will be considered

Technically Unacceptable.

The standard has been met when: The quoter has clearly quoted for the exact brand name EVAPCO Closed-

Circuit Fluid Cooling Tower (EVAPCO Model No. ATW 238-3J-2 Serial No. M014744) items / products items and has provided the following: (a) MFG name, (b) Part Number, (c)illustrations/specifications, and / or

(d) literature or description.

Technical Factor 2 - Delivery Plan. The quoter shall provide a clear delivery timeframe for the exact brand name

EVAPCO Closed-Circuit Fluid Cooling Tower (Model No. ATW 238-3J-2Serial No. M014744), including key milestones.

The standard has been met when: The quoter provides a delivery timeframe for the exact brand name

EVAPCO Closed-Circuit Fluid Cooling Tower (EVAPCO Model No. ATW 238-3J-2Serial No. M014744) items/products to include key milestones.

Price Evaluation. The Government will then conduct a price evaluation of the lowest priced technically acceptable quote to determine that the quoted price is fair and reasonable.

Interchanges. It is the Government's intent to award without interchanges. The Government may consider, throughout the evaluation, the "correction potential" of any quotes to this RFQ. The judgement of such "correctional potential" is within the sole discretion of the Government and may be held with all, some, or none of the Quoters.

The Government may determine one or a few Quoters have the highest potential to provide the best value to the

Government. The Government may conduct interchanges with those Quoters that, at the discretion of the

Contracting Officer, have the highest potential to represent the best value. Resolution of minor or clerical issues would not constitute interchanges, and the Government reserves the right to award without the opportunity to revise quotes.

BRAND NAME – EVAPCO CLOSED-CIRCUIT FLUID COOLING TOWER

(THE QUOTE SHALL BE EFFECTIVE 60 DAYS AFTER SUBMISSION)

P a g e 4 | 4

Basis for Award. 502d CONS/JBKAA will award a purchase order resulting from this RFQ to the responsible quoter whose quote confirming that RFQ will be most advantageous to the Government.

Mandatory Registrations. To be eligible for award, registration with the System for Award Management (SAM) must be current (legacy for On-line Registration and Certifications Application (ORCA) and Central Contractor

Registration (CCR) registrations). To register or update former CCR and Reps & Certs that are not current go to https://www.sam.gov/portal/public/SAM and provide mandatory information.

https://www.sam.gov/portal/public/SAM

Solicitation/Contract Form Brand Name – EVAPCO Closed-Circuit Fluid Cooling Tower, JBSA FSH, TX

Product Service Code: 4120

FA301625Q0226

Supplies or Services & Prices or Costs Additional Information/Notes

Item Supplies / Services Quantity Unit Unit Price Amount

Brand Name - EVAPCO Closed-Circuit Fluid Cooling Tower 2-Cells, JBSA

FSH, TX

All costs associated with delivery shall be included.

Brand/Label: EVAPCO Model Number: ATW 238-3J-2 Serial Number: M014744 Product Service Code: 4120 Pricing Arrangement: Firm Fixed Price

1 Each

Description/Specifications/Statement of Work

EVAPCO ATW 238-3J-2 two (2) cell induced draft, exact replacement counterflow, closed-circuit fluid cooler complete with the following features:

All Type G-235 galvanized steel upper panel construction including mechanical support & fan screen | All Type 304 stainless steel basin with factory welded seams| Sensi-Pak(r) heat transfer coil, hot dipped galvanized after fabrication with 4" MPT coil connections| Factory mounted crossover piping | Non-corrosive PVC Spray Distribution System with non-clog nozzles | PVC air inlet louvers with 3/4" openings to prevent trash and debris from entering the cold water basins, integral screens | Two (2) - 15 HP fan motors located on an exterior of cooling tower. Motor and drive assembly have a 5YR warranty | Amarillo right angle gear drive assembly complete with the following options:

Extended oil fill/drain, Oil level sight glass, Composite drive shaft with external motor mount, stainless steel couplings, two (2) - 3 HP TEFC spray pump/motors, Electric basin heaters, complete with thermostat/low water cut out switch, four (4) - 6 kW heaters per cell, Stainless steel strainer per suction outlet, External service platforms with vertical ladder, Motor Davits/Bases, 2" MPT Connection, make up per cell, Flume Plate, shipped loose, Mechanical float valve assembly per cell.

Requirements Purchase and Delivery of Brand Name: Evapco Two (2) Cell Closed Circuit Fluid Cooling Tower at JBSA FSH, TX

Packaging and Marking

Inspection and Acceptance Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: See Contract Terms and Conditions for Inspection and Acceptance criteria.

DoDAAC: F2M3CB CountryCode: USA

F2M3CB 502 CES CERF

AF NO MILSBILLS PROC CP 2102213955, 1675 GOTT ST

JBSA LACKLAND, TX 78236-5643

UNITED STATES

Leonard Garcia Email: leonardo.garcia.4@us.af.mil Telephone: 2103769747

Deliveries or Performance Physical Address of Delivery

Joint Base San Antonio (JBSA) Ft Sam Houston (FSH)

502d Civil Engineer Squadron (502CES)

2193 Procurement St B4197 JBSA FSH, TX 78234

JBSA FSH Walter's Commercial/Delivery Gate

Address: 2130, Winfield Scott Road, JBSA FSH 78234 Phone: (210) 808-1087 Operating Hours: 6 a.m. - 1 p.m., Monday - Friday (Closed on Weekends & Holiday)

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Schedule From date of lead time event to date of latest delivery 10 Weeks Date of Award

1 Each Ship To DoDAAC: F2M3CB CountryCode: USA

F2M3CB 502 CES CERF

AF NO MILSBILLS PROC CP 2102213955, 1675

GOTT ST

JBSA LACKLAND, TX 78236-5643

UNITED STATES

Leonard Garcia Email: leonardo.garcia.4@us.af.mil Telephone: 2103769747

FoB Details Contractor Destination

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.247-34 F.o.b. Destination. Jan 1991

Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Electronic invoicing.

Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before WAWF training.

submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. WAWF methods of document submission.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this WAWF payment instructions.

contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report - Combo

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

NA

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating Document routing.

payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F87700

Issue By DoDAAC FA3016

Admin DoDAAC FA3016

Inspect By DoDAAC F2M3CB

Ship To Code F2M3CB

Ship From Code NA

Mark For Code NA

Service Approver (DoDAAC) NA

Service Acceptor (DoDAAC) NA

Accept at Other DoDAAC NA

LPO DoDAAC NA

DCAA Auditor DoDAAC NA

Other DoDAAC(s) NA

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance Payment request.

with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

TBD

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Special Contract Requirements

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-3 Gratuities. Apr 1984 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. Nov 2015 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023 52.223-5 Pollution Prevention and Right-to-Know Information. May 2024 52.233-1 Disputes. May 2014 52.233-4 Applicable Law for Breach of Contract Claim. Oct 2004 52.242-13 Bankruptcy. Jul 1995

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7003 Control of Government Personnel Work Product. Apr 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. (DEVIATION

2024-O0013 REVISION 1)

May 2024 Deviation 2024-O0013 May 2024

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. Sep 2014 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7010 Levies on Contract Payments. Dec 2006 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.243-7002 Requests for Equitable Adjustment. Dec 2022 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.246-7003 Notification of Potential Safety Issues. Jan 2023 252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System. Jan 2023 252.246-7008 Sources of Electronic Parts. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders

- Commercial Products and Commercial Services. (DEVIATION 2025-O0003 and 2025-O0004)

(Jan 2025) Deviation 2025-O0004 (Mar 2025)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, of the (Jan 2017) Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Section (Dec 2023) 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(a)(1)(A) of Pub. (Nov 2021) L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(Nov 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(Mar 2023)

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(Aug 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).(Oct 2004)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-6[X] , Restrictions on Subcontractor Sales to the Government (Jun 2020), with (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).Alternate I

52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).[ ](2) (Nov 2021)

52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-5). (Applies to [ ](3) (Jun 2010) contracts funded by the American Recovery and Reinvestment Act of 2009.)

52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast [ ](4) (Nov 2023) Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

[X] 52.204-10, (5) Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).(Jun 2020)

[Reserved].[ ] (6)

52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).[ ] (7) (Oct 2016)

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).[ ] (8) (Oct 2016)

[X] 52.204-27 (9) , Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(Jun 2023)

52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency [ ] (10) Contracts. (Pub. L. 115-390, title II).(Dec 2023)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title II).[ ] (11)

Alternate I of 52.204-30.[ ] (ii) (Dec 2023)

[X] (12) Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily 52.209-6, Excluded. ( 2025) (31 U.S.C. 6101 note).Jan

52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).[ ] (13) (Oct 2018)

[Reserved].[ ] (14)

52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).[ ] (15) Oct 2022

52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the preference, it shall so [ ] (16) Oct 2022 indicate in its offer) (15 U.S.C. 657a).

[Reserved][ ] (17)

(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).[ ] (18)

Alternate I of 52.219-6.[ ] (ii) (Mar 2020)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).[ ] (19)

Alternate I of 52.219-7.[ ] (ii) (Mar 2020)

52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)).[ ] (20) ( )Jan 2025

(i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) (15 U.S.C. 637(d)(4)).[ ] (21)

Alternate I of 52.219-9.[ ] (ii) (Nov 2016)

Alternate II of 52.219-9.[ ] (iii) (Nov 2016)

Alternate III of 52.219-9.[ ] (iv) (Jun 2020)

Alternate IV of 52.219-9.[ ] (v) ( )Jan 2025

(i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).[ ] (22)

Alternate I of 52.219-13.[ ] (ii) (Mar 2020)

52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 657s).[ ] (23) Oct 2022

52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).[ ] (24) (Sep 2021)

52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the [ ] (25) SDVOSB Program ( ) (15 U.S.C. 657f).Feb 2024

, Post award Small Business Program Re-representation (Jan 2025) (15 U.S.C. 632(a)(2)).[X] (i) 52.219-28 (26)

Alternate I of 52.219-28.[ ] (ii) (Mar 2020)

52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ( ) [ ] (27) Oct 2022 (15 U.S.C. 637(m)).

52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business [ ] (28) Program ( ) (15 U.S.C. 637(m)).Oct 2022

52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).[ ] (29) (Mar 2020)

, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).[X] 52.219-33 (30) (Sep 2021)

Convict Labor (E.O.11755).[X] 52.222-3, (31) (Jun 2003)

[X] (32) , Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).52.222-19 (Jan 2025)

[Reserved][ ] (33)

[Reserved][ ] (34)

, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).[X] (i) 52.222-35 (35)

Alternate I of 52.222-35.[ ] (ii) (Jul 2014)

Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).[X] (i) 52.222-36, (36)

Alternate I of 52.222-36.[ ] (ii) (Jul 2014)

7, Employment Reports on Veterans ( ) (38 U.S.C. 4212).[X] 52.222-3 (37) Jun 2020

Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).[X] 52.222-40, (38) (Dec 2010)

, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).[X] (i) 52.222-50 (39)

Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).[ ] (ii) (Mar 2015)

[ ] (40) 52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf (Jan 2025) items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to [ ] (41) the acquisition of commercially available off-the-shelf items.)

Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)[ ] (ii) (May 2008)

, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ).[X] 52.223-11 (42) (May 2024) et seq.

, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, ).[X] 52.223-12 (43) (May 2024) et seq.

, Aerosols (42 U.S.C. 7671, ).[X] 52.223-20(44) (May 2024) et seq.

1, Foams (42 U.S.C. 7671, ).[X] 52.223-2 (45) (May 2024) et seq.

, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. [X] 52.223-23 (46) 7671l).

(i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).[ ] (47)

Alternate I of 52.224-3.[ ] (ii) (Jan 2017)

[X] (i) 52.225-1 (48) , Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

Alternate I of 52.225-1.[ ] (ii) (Oct 2022)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 [ ] (49) U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

Alternate I [Reserved].[ ] (ii)

Alternate II of 52.225-3.[ ] (iii) (Jan 2025)

Alternate III of 52.225-3.[ ] (iv) (Feb 2024)

Alternate IV (Oct 2022) of 52.225-3.[ ] (v)

52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).[ ] (50) (NOV 2023) et seq

, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets [X] 52.225-13(51) (Feb 2021) Control of the Department of the Treasury).

52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense [ ] (52) Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).[ ] (53)

52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42 U.S.C. 5150).[ ] (54) (Nov 2007)

, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).[X] 52.226-8 (55) (May 2024)

52.229-12, Tax on Certain Foreign Procurements .[ ] (56) (Feb 2021)

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).[ ] (57) (Nov 2021)

52.232-30, Installment Payments for Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).[ ] (58) (Nov 2021)

Payment by Electronic Funds Transfer-System for Award Management (31 U.S.C. 3332).[X] 52.232-33, (59) (Oct2018)

52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).[ ] (60)

52.232-36, Payment by Third Party (31 U.S.C. 3332).[ ] (61) (May 2014)

52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).[ ] (62) (Aug 1996)

Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities [X] 52.240-1, (63) (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

52.242-5, Payments to Small Business Subcontractors (15 U.S.C. 637(d)(13)).[ ] (64) (Jan 2017)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).[ ] (65)

Alternate I of 52.247-64.[ ] (ii) (Apr 2003)

Alternate II of 52.247-64.[ ] (iii) (Nov 2021)

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.C. chapter 67).[ ] (2) (May 2014)

52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) [ ] (3) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) (29U.S.C.206 and 41 U.S.C. chapter 67).[ ] (4)

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-[ ] (5) Requirements (May 2014) (41 U.S.C. chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements [ ] (6) (May 2014) (41 U.S.C. chapter 67).

52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .[ ] (7) (Jan 2022)

52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).[ ] (8) (Jan 2022)

52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).[ ] (9)

52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (49 U.S.C. 40118(g)).[ ] (10) (Jan 2025)

(d) . The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than Comptroller General Examination of Record sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509).(Nov 2021)

(ii) 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712).(Nov 2023)

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Section (Dec 2023) 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(a)(1)(A) of Pub. (Nov 2021) L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(Jun 2023)

(vii)(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title II).

(B) Alternate I of 52.204-30.(Dec 2023)

(viii) 52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If ( )Jan 2025 the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) [Reserved]

(x) [Reserved]

(xi) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(Jun 2020)

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(Jun 2020)

(xiii) 52.222-37, Employment Reports on Veterans (38 U.S.C. 4212).(Jun 2020)

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496). Flow down required in accordance with (Dec 2010) paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (41 U.S.C. chapter 67).(Aug 2018)

(xvi)(A) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(Mar 2015)

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment- Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (E.O. 12989).(Jan 2025)

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(Jan 2022)

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(Jan 2022)

(xxii)(A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I of 52.224-3.(Jan 2017)

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Section 862, as amended, of the National Defense (Oct 2016) Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of (Jun 2020) FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

(xxvii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in (Nov 2021) accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.223-3 Hazardous Material Identification and Material Safety Data. (Feb 2021)

Hazardous Material Identification and Material Safety Data (Feb 2021)

(a) "Hazardous material," as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No.313 (including revisions adopted during the term of the contract).

(b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Material Safety Data Sheet submitted under this contract.

Material (If none, insert )None Identification No.

(c) This list must be updated during performance of the contract whenever the Contractor determines that any other material to be delivered under this contract is hazardous.

(d) The apparently successful offeror agrees to submit, for each item as required prior to award, a Material Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No.313, for all hazardous material identified in paragraph (b) of this clause. Data shall be submitted in accordance with Federal Standard No.313, whether or not the apparently successful offeror is the actual manufacturer of these items. Failure to submit the Material Safety Data Sheet prior to award may result in the apparently successful offeror being considered non-responsible and ineligible for award.

(e) If, after award, there is a change in the composition of the item(s) or a revision to Federal Standard No.313, which renders incomplete or inaccurate the data submitted under paragraph (d) of this clause, the Contractor shall promptly notify the Contracting Officer and resubmit the data.

(f) Neither the requirements of this clause nor any act or failure to act by the Government shall relieve the Contractor of any responsibility or liability for the safety of Government, Contractor, or subcontractor personnel or property.

(g) Nothing contained in this clause shall relieve the Contractor from complying with applicable Federal, State, and local laws, codes, ordinances, and regulations (including the obtaining of licenses and permits) in connection with hazardous material.

(h) The Government's rights in data furnished under this contract with respect to hazardous material are as follows:

(1) To use, duplicate and disclose any data to which this clause is applicable. The purposes of this right are to-

(i) Apprise personnel of the hazards to which they may be exposed in using, handling, packaging, transporting, or disposing of hazardous materials.

(ii) Obtain medical treatment for those affected by the material; and

(iii) Have others use, duplicate, and disclose the data for the Government for these purposes.

(2) To use, duplicate, and disclose data furnished under this clause, in accordance with paragraph (h)(1) of this clause, in precedence over any other clause of this contract providing for rights in data.

(3) The Government is not precluded from using similar or identical data acquired from other sources.

(End of clause)

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

www.acquistion.gov

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

Authorized Deviations in Clauses (Nov 2020)

The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition (a) of "(DEVIATION)" after the date of the clause.

The use in this solicitation or contract of any (48 CFR Chapter 2) clause with an authorized deviation is (b) Defense Federal Acquistion Regulation Supplement indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set…