RFQ Mobile Firing Range_ Aviano AB_ 29 Feb 2024v2.xls
XLS spreadsheet 51 KB Posted
- Attached to
- Portable Firing Range
- Solicitation number
- FA5682424Q8028
About this file
This document is a Request for Information (RFI) for the procurement of 1 Deployable, 8-firing lane Mobile Firing Range to be installed at Aviano AB, Italy. The Range must be constructed in accordance with DT 4020 requirements and meet or exceed specifications outlined in UFC 4-179-02 for indoor firing ranges. Key requirements include a minimum 25 meter firing line, certified for up to 7.62mm x 51 Ball ammunition and burst fire, a public address system, and an absorption backstop with 90% intact ogives recovery. The Range must be deployable, with all components capable of running off a generator. Responses to this non-binding RFI are due by 19 April 2023, and will be used for market research to assist in the potential future procurement of the specified Mobile Firing Range.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ufc_4_179_02_2020_CHAPTER 4 ONLY.pdf | ||
| DT4020_TESTO_DEFINITIVO_ed._2020.pdf | ||
| RFI- Deployable Firing Range.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| Requirements | Quantity | Unit of | |||
| Measure | Quantity | ||||
| per Unit | General Statement of Application / Scope of Work | ||||
| Mobile Fully Contained Shooting Range | 1 | Each | 1 | SoW: Procurement for 1 Deployable, 8-firing lane Mobile Firing Range. A new Mobile Firing Range will be constructed in accordance with DT 4020 and installed at Aviano AB, Italy. | |
| Deployable building (ability to transport via shipping company to another location) | |||||
| Pre-assembled and modular structure | |||||
| Must transport to Aviano AB | |||||
| 8 individual firing points, minimum length of 25 meters per shooting lane and maximum of 40 meters. (firing line to target impact line) | |||||
| Certified up to 7.62mm X 51 Ball Ammunition | |||||
| Certified for burst fire(automatic machine gun rate of fire) | |||||
| Translated DT 4020, est. 2020, Chapter 5.2.1 : Required Documents for Stato Maggiore Esercito (SME/Infastructure Department) below: | |||||
| Opinion of compliance with DT 4020 | |||||
| Design and related documentation reports drawn up by a engineer for infrastructural and ballistic aspects | |||||
| Bullet stop must be certified by BANCO DI PROVA NAZIONALE | |||||
| Shooting suitability certificate issued by Ispegenio (First Release) | |||||
| Full compliance within the DT 4020 specification requirements | |||||
| Must have Public Announcement system to give commands to shooters from the "tower" | |||||
| Must at a minimum meet Chapter 4, "Indoor Firing Ranges" of UFC 4-179-02 specification requirements (Department of Defense Unified Facilities Criteria regulation; Dated 5 March 2020)(available upon request) | |||||
| Furnish specific weight and the type of ground work needed for the structure to rest on | |||||
| Shooters area internal heigh not lower then 2.80 meters | |||||
| Absorption backstop within 90% intact ogives recovery and certified up to/past the 3rd weapon systems category | |||||
| Ventilation system with separate intake and extraction unit(s) | |||||
| All components assosicated to the Mobile Firing Range must run off of a generator. | |||||
| Electric generator able to cover all absorption and with sufficient power for the full functionality of the range in remote areas | |||||
| Roof tubes with 730 mm pitch (sound masking material) | |||||
| Wall tubes with 1000 mm pitch (sound masking material) | |||||
| Insulation pannel REI 120 (Fire Resistance) required | |||||
| Anti-lightning system (grounding system to prevent damage to ranges electrical system from lighting strikes) | |||||
| Will have a raise floor in booth a minimum 2 ft. (0.6 m) minimum above the range floor | |||||
| Control booth must be centered to provide full line-of-sight of shooters | |||||
| Will complete installation and required functionality tests prior to user utilization |
File details come from the government source that posted it. Updated .