RFQ H9225722Q0038.pdf

H92257-22-Q-0038

This is a COMBINED SYNOPSIS/SOLICITATION for Sporting and Athletic equipment for Marine Forces

Special Operations Command (MARFORSOC). This announcement is prepared in accordance with the format in

FAR Subpart 12.6, and Part 13 as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation is being issued as a Request for Quote (RFQ); solicitation number is H92257-22-Q-0038.

The Government may make multiple awards depending on the results of evaluations using the criteria outlined in the

FAR 52.212-2 “Evaluation” addendum. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2022-06, (effective 04 April 2022) and the DFARS

Publication Notice (DPN) 20220623 see edition. The Product Service Code (PSC) for this requirement is 7810. The associated North American Industrial Classification System (NAICS) code for this requirement is 339920 with a size standard of 750 Employees. The proposed acquisition is restricted to Small Business Only.

TYPE OF CONTRACT. Firm-Fixed Price (FFP) purchase order.

The Government reserves the right and may award based solely on information contained in the quote. It is the Government’s intention to award without discussions. Offerors are encouraged to present their quote in their initial submission.

All quotes submitted shall be the Contractor's Best Quote as it is the Government's intent to entertain one (1) final quote only; this includes any discounts on volume.

Offerors must scrutinize this solicitation and ensure their quotes and submissions comply with all requirements. It is not sufficient to merely state your quote complies with the solicitation requirements. You must clearly identify how your quote meets ALL the solicitation requirements.

Section B – Supplies or Services

Requested Delivery Date:

Deliveries must begin 30 days after receipt of award.

CLIN EQUIPMENT NAME QTY Line Item Description

0001 Rogue MG-3 multi grip bar

#RA0732 or manufacturer equivalent

6 Reference #RA0732 Multi neutral-grip 43 pound / Swiss / football bar design w/ black powder coat finish. Fully welded w/ 2 angled handles spaced at 10”, 4 vertical handles spaced at 20” and 28.5”

Handle diameter of 1.25” w/ sleeve diameter of1.91” Loadable

Sleeve Length: 14”

0002 Elite FTS SS Yoke Bar

#DS-BB-SSBAR or manufacturer equivalent

6 New bar design to build your squat and pulls while SAVING

YOUR SHOULDERS and back with our ultra-load displacing pad design. The new and improved SS Yoke Bar is made for everyday use. Built to handle over 800 pounds. Weight: 65 pounds. Length:

92". Made in the USA.

0003 Rogue Chalk Stand w/

Wheels #RF0637 or manufacturer equivalent

4 SPECIFICATIONS: Height (without wheels) 38.5" (98cm).

Weight: 38 lb. Bowl Diameter: 13.625". Bowl Depth: 5". 2x2" 11-guage steel upright. 0.375" thick base plates with laser-cut rogue logo. Optional wheels. 2 sets of bolts on storage hangers.

0004 Rogue "Ohio" lifting straps

# or manufacturer equivalent

12 Specifications: Sold as Pair. Durable Black Cotton Webbing.

Length: 20" (50.8CM). Width: 1.5" (38MM). Single Closed Loop design. Sewn/reinforced edge to prevent fraying.

0005 Sorinex Stash Hook

#P06607 or manufacturer equivalent

20 Fits any 11 or 7-gauge rack with 1" holes. Specifications: Length:

3". Width: 0.375". Height 4".

0006 IronMind: Captains of

Crush - Trainer or manufacturer equivalent

10 Knurled aircraft-grade aluminum handles. Proprietary GR8 springs, only on CoC Grippers and IMTUGs. Precision manufacturing for gold standard performance, feel, and appearance. 10 different strength options to match any athlete's goals.

0007 IronMind: Captains of

Crush - No. 1 or manufacturer equivalent

10 Knurled aircraft-grade aluminum handles. Proprietary GR8 springs, only on CoC Grippers and IMTUGs. Precision manufacturing for gold standard performance, feel, and appearance. 10 different strength options to match any athlete's goals.

0008 Sorinex Single Bar Storage

- Vertical Orientation

#P01722 or manufacturer equivalent

6 Specifications: Depth: 6.69", Width: 9, Height: 5.13". Premium

Bar Storage Option. Vertical or Horizontal Configurations.

Utilizes 4-Way Hole Design. Attach Directly to inside or outside of rack for use.

0009 The Breath Belt (via

Sorinex #P08945) or manufacturer equivalent

10 Diaphragmatic breath training tool that activates the gluteal muscles. The nonstop, tactile diaphragmatic breath cues alleviate muscles and fascial restriction of the abdominal muscles, allows the Psoas and Quadratus Lumborum Muscles to function with less restriction.

0010 Rogue Ab Wheel or manufacturer equivalent

6 It’s equipped with a nickel-plated steel shaft, a durable rubber tire tread for optimal grip on most surfaces, and sealed bearings for smooth, precision rotations. The wheel is also slightly rounded on the edges, challenging the user to keep the roller straight and prevent unwanted turns during each rollout.

0011 Mag Medium Grip Neutral or manufacturer equivalent

10 Approx. 22″ wide (middle finger to middle finger)

0012 Perform Better Triceps

Rope or manufacturer equivalent

6 Double grip triceps press down rope. Durable nylon rope with rubber stoppers.

0013 Fat Grips or manufacturer equivalent

18 Made from a military-grade, high-density compound, Fat Gripz can instantly transform any standard barbell into an axle bar (thick bar). They also fit most dumbbells, pull-up bars, and cable attachments, – doubling the thickness for a greater test of arm and grip strength. Once attached, Fat Gripz hold to the bar firmly like a clamp and won't compress.

0014 Spud INC Deluxe Cable

Handles or manufacturer equivalent

10 Cable Handles feature a 6" long steel handle with a textured rubber coating and come with large spring clips for attaching to cable machines, bands, chains or even suspension straps.

0015 Rogue Fitness Curl Bar or manufacturer equivalent

6 Fully machined and assembled in the USA includes bronze bushings, a snap ring design, and our trademark Ohio knurl pattern. Many athletes can benefit from this type of specialty camber bar, as the bends in the shaft help limit stress on the wrists and reduce common injury risks.

0016 Ader Premier Kettlebells

(12k) or manufacturer equivalent

12 •Fully cast iron, no welding, outstanding handle, gray hammertone paint, and not slick or slippery.

0017 Ader Premier Kettlebells

(16k) or manufacturer equivalent

12 •Fully cast iron, no welding, outstanding handle, gray hammertone paint, and not slick or slippery.

0018 Ader Premier Kettlebells

(20k) or manufacturer equivalent

12 •Fully cast iron, no welding, outstanding handle, gray hammertone paint, and not slick or slippery.

0019 Ader Premier Kettlebells

(24k) or manufacturer equivalent

12 •Fully cast iron, no welding, outstanding handle, gray hammertone paint, and not slick or slippery.

0020 Ader Premier Kettlebells

(28k) or manufacturer equivalent

12 •Fully cast iron, no welding, outstanding handle, gray hammertone paint, and not slick or slippery.

0021 Ader Premier Kettlebells

(32k) or manufacturer equivalent

12 •Fully cast iron, no welding, outstanding handle, gray hammertone paint, and not slick or slippery.

0022 Ader Premier Kettlebells

(36k) or manufacturer equivalent

12 •Fully cast iron, no welding, outstanding handle, gray hammertone paint, and not slick or slippery.

0023 Iron Grip Dumbbell Pair

(90lb) or manufacturer equivalent

1 12-sided, urethane coated, solid steel cats, hex-style dumbbells.

1.75" grip diameter. Straight handle design.

0024 Iron Grip Dumbbell Pair

(100lb) or manufacturer equivalent

1 12-sided, urethane coated, solid steel cats, hex-style dumbbells.

1.75" grip diameter. Straight handle design.

0025 Iron Grip Dumbbell Pair

(105lb) or manufacturer equivalent

2 12-sided, urethane coated, solid steel cats, hex-style dumbbells.

1.75" grip diameter. Straight handle design.

0026 Iron Grip Dumbbell Pair

(110lb) or manufacturer equivalent

2 12-sided, urethane coated, solid steel cats, hex-style dumbbells.

1.75" grip diameter. Straight handle design.

0027 Iron Grip Dumbbell Pair

(115lb) or manufacturer equivalent

2 12-sided, urethane coated, solid steel cats, hex-style dumbbells.

1.75" grip diameter. Straight handle design.

0028 Iron Grip Dumbbell Pair

(120lb) or manufacturer equivalent

2 12-sided, urethane coated, solid steel cats, hex-style dumbbells.

1.75" grip diameter. Straight handle design.

0029 Iron Grip Dumbbell Pair

(125lb) or manufacturer equivalent

2 12-sided, urethane coated, solid steel cats, hex-style dumbbells.

1.75" grip diameter. Straight handle design.

0030 Rogue MG-3 multi grip bar

#RA0732 or manufacturer equivalent

2 Reference #RA0732 Multi neutral-grip 43 pound / Swiss / football bar design w/ black powder coat finish. Fully welded w/ 2 angled handles spaced at 10”, 4 vertical handles spaced at 20” and 28.5”

Handle diameter of 1.25” w/ sleeve diameter of1.91” Loadable

Sleeve Length: 14”

0031 Rogue LB-1 10" Log bar

#RA0006 or manufacturer equivalent

2 Reference #RA0006 Weight: 72-pound, 10" diameter laser cut steel tube 1/8" thick. Fully welded end & internal plates. Solid

0.375" round bar protection on openings w/ 26" handle spacing on center & 1.66" diameter neutral grip handles. 14" loadable sleeve length

0032 Band Barbell Earthquake bar #BA0001 or manufacturer equivalent

2 Reference #BA0001 80" long barbell, diameter 1.5", weight 6 pounds. Handles weight more than 300 pounds.

0033 Rogue Sandbag 2.0 medium, black #RA2210-

M or manufacturer equivalent

5 Reference #RA2210-M Sandbag’s is made of 1000D domestic cordura material that is double stitched w/ reinforced seams & 7 nylon webbing handles. Sandbag can handle up to 150 pounds of dry sand. Dimensions 24" length x 9" width when filled.

0034 Benchblokz small, black

#BLKZ01 or manufacturer equivalent

5 Reference #BLKZ01 Small, black bench block w/ 3 positions equivalent to elevating the bar ½ board (0.75”), 1 board (1.5”) or 2 boards (3”) above the chest. Compatible with 28-29MM barbell shaft diameters

0035 14" Black 80 lb. D-Ball

#PO5703 or manufacturer equivalent

2 Reference # PO5703 Black 60-pound medicine ball, 14" diameter w/ durable rubber shell & textured grip

0036 14" Black 60 lb. D-Ball

#PO5703 or manufacturer equivalent

2 Reference # PO5703 Black 80-pound medicine ball, 14" diameter w/ durable rubber shell & textured grip

0037 14" Black 100 lb. D-Ball

#PO5703 or manufacturer equivalent

2 Reference # PO5703 Black 100-pound medicine ball, 14" diameter w/ durable rubber shell & textured grip

0038 Sorinex 2.5-pound black

Urethane Change Plates

#P05035 or manufacturer equivalent

48 Reference # PO5035Black 2.5-pound urethane coated change weight plate. Dimensions: 7.1" diameter X 0.79" thick.

0039 Sorinex 5-pound black

Urethane Change Plates

#P05035 or manufacturer equivalent

96 Reference #PO5035 Black 5-pound urethane coated change weight plate. Dimensions: 8.7" diameter X 0.87" thick.

0040 Sorinex 10-pound black

Training Bumper Plates

#PO9881 or manufacturer equivalent

96 Reference #PO9881 Black 10-pound rubber coated weight plate.

Dimensions: 17.72" diameter X 1"" thick. Large steel disc collar w/ 6 screws securely locked in that will integrate w/ all Olympic style barbells.

0041 25-pound black Training

Bumper Plates #PO9881 or manufacturer equivalent

96 Reference #PO9881 Black 25-pound rubber coated weight plate.

Dimensions: 17.72" diameter X 1.25"" thick. Large steel disc collar w/ 6 screws securely locked in that will integrate w/ all

Olympic style barbells.

0042 Sorinex 45-pound black

Training Bumper Plates

#PO9881 or manufacturer equivalent

160 Reference #PO9881 Black 45-pound rubber coated weight plate.

Dimensions: 17.72" diameter X 2.12"" thick. Large steel disc collar w/ 6 screws securely locked in that will integrate w/ all

Olympic style barbells.

0043 Flexi-roll Martial Arts Mat

10x10 smooth Black

Product code: 114S-10x10-

MA or manufacturer equivalent

4 Product code: 114S-10x10-MA Flexi-roll martial arts mat smooth

BLACK. (1) flexi-roll includes (2) 5' width x 10’ length x 1.25" thick. Mats are lead; BPA & phthalate free & include 1 roll of 3" clear mat tape.

0044 Theragun Elite Wireless

Charger stand or manufacturer equivalent

6 Compatible with Theragun Elite ONLY Full charge in 110 minutes

Dimensions: 4.13" length x 7.9" height x 4.8" width

0045 Perform Better Stability

Ball 8-Ball PVC Rack

#SKU: 1009-08 or manufacturer equivalent

2 Reference SKU: 1009-08 Made from PVC plastic, light weight, stores 8 stability balls, & easy to move. Easy to assemble & requires no glue or hardware. Dimensions: 54" wide X 18" deep

X 88" high.

0046 Thera-band Pro Series SCP

Stability Ball 65 CM or manufacturer equivalent

6 Reference #SKU: 1008-65 65 CM soft rubber stability ball used for body weight exercise. Includes (2) plugs, inflation adapter, measuring tape for proper inflation & exercise guide poster detailing 24 exercises.

0047 Crossover Symmetry Pro

Package with Squat Rack

Straps or manufacturer equivalent

10 Reference # - CS0012-HV - Crossover Symmetry Facility Package including both Athletic and Elite resistance cords (4 pairs of each;

7lb, 10lb, 15lb, and 25lb resistance). Advanced, fully customizable shoulder health and performance training system developed by physical therapists to mitigate injury and maximize performance.

CLIN

INSPECT AT

Destination

INSPECT BY

Government

ACCEPT AT

Destination

ACCEPT BY

Government

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

FAR: https://www.acquisition.gov/?q=browsefar

DFARS: https://www.acquisition.gov/?q=Supplemental_Regulations

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR: https://www.acquisition.gov/?q=browsefar

DFARS: https://www.acquisition.gov/?q=Supplemental_Regulations

(End of clause)

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions NOV 2013

52.203-3 Gratuities APR 1984

52.203-18 Prohibition on Contracting with Entities That Require Certain

Internal Confidentiality Agreements or Statements--

Representation

JAN 2017

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011

52.204-13 System for Award Management Maintenance OCT 2018

52.204-16 Commercial and Government Entity Code Reporting JUL 2016

52.204-17 Ownership or Control of Offeror JUL 2016

52.204-18 Commercial and Government Entity Code Maintenance JUL 2016

52.204-20 Predecessor of Offeror JUL 2016

52.204-21 Basic Safeguarding of Covered Contractor Information

Systems

JUN 2016

52.204-22 Alternative Line Item Proposal JAN 2017 https://www.acquisition.gov/?q=browsefar https://www.acquisition.gov/?q=Supplemental_Regulations https://www.acquisition.gov/?q=browsefar https://www.acquisition.gov/?q=Supplemental_Regulations

52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

NOV 2015

52.209-11 Representation by Corporations Regarding Delinquent Tax

Liability or a Felony Conviction under any Federal Law

FEB 2016

52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018

52.219-9 (Dev) Small Business Subcontracting Plan (Deviation 2018-O0018) AUG 2018

52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

AUG 2018

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-2 Service Of Protest SEP 2006

52.246-4 Inspection Of Services--Fixed Price AUG 1996

252.201-7000 Contracting Officer's Representative DEC 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.205-7000 Provision Of Information to Cooperative Agreement Holders DEC 1991

252.209-7004 Subcontracting With Firms That Are Owned or Controlled by

The Government of a Country that is a State Sponsor of

Terrorism

MAY 2019

252.215-7008 Only One Offer JUL 2019

252.219-7003 Small Business Subcontracting Plan (DOD Contracts) MAY 2019

252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or

Hazardous Materials

SEP 2014

252.225-7001 Buy American and Balance of Payments Program-- Basic DEC 2017

252.225-7002 Qualifying Country Sources as Subcontractors DEC 2017

252.225-7012 Preference For Certain Domestic Commodities DEC 2017

252.225-7048 Export-Controlled Items JUN 2013

252.226-7001 Utilization of Indian Organizations and Indian-Owned

Economic Enterprises, and Native Hawaiian Small Business

Concerns

APR 2019

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JUN 2013

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.243-7002 Requests for Equitable Adjustment DEC 2012

252.244-7000 Subcontracts for Commercial Items JUN 2013

252.247-7023 Transportation of Supplies by Sea FEB 2019

CLAUSES INCORPORATED BY FULL TEXT

52.211-6 Brand Name or Equal (Aug 1999)

(a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation.

(b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must-

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by-

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation.

52.212-1 Instructions to Offerors—Commercial Products and Commercial Services. (Nov 2021)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition—

(1)Is set aside for small business and has a value above the simplified acquisition threshold;

(2)Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(3)Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show—

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR)

52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart

4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation.

Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2) (i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and-

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for proposals, it was the only proposal received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation.

(1) (i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part

101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to- GSA Federal Supply Service Specifications Section Suite 8100 470

East L’Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST ( https://assist.dla.mil/online/start/).

(ii) Quick Search ( http://quicksearch.dla.mil/).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock

Point (DoDSSP) by-

(i) Using the ASSIST Shopping Wizard ( https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Unique entity identifier.(Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award

Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the

Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier.

(k) [Reserved]

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency’s evaluation of the significant weak or deficient factors in the debriefed offeror’s offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

ADDENDUM 52.212-1

Quote Preparation and Submission Instructions.

(1) All questions concerning this procurement, either technical or contractual must be submitted in writing, via email, to the Contracting Office. The deadline for submittal of follow up questions regarding this solicitation is

4:00 PM Eastern Standard Time (EST) on August 30th, 2022, by 0800 EST. The Government’s responses will be provided via solicitation/RFQ amendment. No direct exchanges between the technical representative and a prospective Offeror shall be conducted unless it is deemed necessary by the Contracting Officer. Questions shall be submitted via email to geronimo.lopez.mil@socom.mil.

(2) Quotes must be received no later than September 6th, 2022, by 0800 EST. Quotes received after this time frame shall not be considered for award. The Government will award the contract resulting from this solicitation to the responsible offeror whose offer is conforming to the solicitation and will be the most advantageous to the

Government. The prospective offeror must be registered with the System for Award Management (SAM) website at http://www.sam.gov to be considered for award. The offeror agrees to hold the prices in its quote firm for 90 calendar days from the date specified for receipt of quotes. All quotes must be submitted via email, no other form of submission will be accepted. Quotes shall be emailed to: geronimo.lopez.mil@socom.mil.

Offerors must provide the following information in their quote: DUNS #, CAGE CODE #, and TIN #

For email quotes, the Government office designated for receipt of the quote is the email inbox of the addressee indicated above. Notwithstanding the provisions at FAR 52.212-1(c), delivery is not accomplished until the addressee can open the email; delivery to a server or an email inbox on a server is not considered delivery to the designated Government office and the quotation is not under the Government's control until the addressee can open the email. The email shall not be considered to be delivered unless the entire content of the email and all attachments can be read by the addressee indicated above. Receipt of an electronic acknowledgment from the addressee establishes that a record was received but does not establish that the content sent corresponds to the content received. Email attachments are limited to no more than 10 MB. Vendors are specifically warned that email may be subjected to spam filters or attachment stripping.

All transmissions must clearly state the solicitation number and the name of the contracting specialist on the first page to ensure proper receipt.

(3) Comprehensive responses to the requirements of this RFQ are required to enable the Government to evaluate the

Offeror’s understanding of, capability and approaches to accomplish the stated requirements. Quotes shall be submitted per the instructions herein, and non-conformance with the specified required content may be cause for rejection of the quote. The quote shall provide comprehensive responses to the areas provided for in this section.

The quote shall be a complete response to the list of items above and the requirements of this RFQ, taking into consideration required quantities and delivery schedules specified in this solicitation. The successful Offeror will be selected based on an evaluation of quotes as outlined in FAR 52.212-2, incorporated below.

(4) Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale in their quote.

Quote Format and Content.

Offerors shall submit their own quote formatting in accordance with the following:

• File size may not exceed 10 MB.

• Page size 8-1/2” x 11”, landscape or portrait orientation is acceptable.

• Font may not be any smaller than 10 pt.

• No Elaborate formats, graphics, color presentations are required.

• Quote validity period of at least 90 days.

• Must include Item number, Equipment Name, Brand, and Item Description (if an alternate item is offered, then the offeror must make identify it as such in their quote.)

• Note: Government’s preference is to receive a quote formatted like Attachment 1, Quote example.

• Note: Vendor must ensure this document is reviewed in its entirety. Failure to provide all required documents may determine your quote technically unacceptable.

52.212-2 EVALUATION--COMMERCIAL ITEMS (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(b) The Government intends to award a Firm Fixed Price type contract to the responsible vendor whose overall quote represents the best value after evaluation in accordance with the factors in the solicitation. To arrive at a selection decision, the Contracting Officer will perform an integrated assessment using the evaluation factors described in this solicitation. This may result in awards being made to the higher rated, potentially higher priced quote(s) where the decision is consistent with the evaluation factors. This is a competitive, best value trade-off selection that will be conducted in accordance with (IAW) with FAR 13, and as supplemented by the Defense

Federal Acquisition Regulation Supplement (DFARS) and Special Operations Federal Acquisition Regulation

Supplement (SOFARS). The following factors will be used to evaluate quotes and are in descending order of importance; Technical, Past Performance and Price. Technical (Item Specifications) is more important than price.

(i) Factor 1 – Technical (Item Specification): Factor 1 will be evaluated based on the offeror’s proposed items. Additionally, the offeror’s quote will be evaluation on delivery lead times and item availability.

Offerors who offer the exact items the government is requesting instead of alternatives will be favorably evaluated. Offerors who quote shorter lead times and items that adhere to the item specifications in the RFQ which are available to ship within 30 days after receipt of award will also be favorably evaluated. Technical ratings are as follows:

a. Exceeds Requirements: Quoted items exceed specification, delivery, and/ or availability requirements. Example: a quote may be given this rating if the offeror submits a quote for the exact items request, with minimal (less than 8) alternatives and is able to start delivery within 30 days after receipt of award.

b. Meets Requirements: Quoted items meet specification, delivery, and availability requirements.

Example: a quote may be given this rating if the offeror submits a quote for the items requested with alternative items that meet the criteria and is able to start delivery within 30 days after receipt of award.

c. Unacceptable: Quote clearly does not meet minimum requirements. Quote is unawardable.

(ii) FACTOR 2 - Price: The evaluated price will be determined using the total price for base and all option years. The offeror’s quoted price will be evaluated per FAR 13.106-3(a). Offerors responding to this solicitation are advised that, prior to award, the Government may request offerors to submit information/data to support price reasonableness such as copies of paid invoices for the same or similar items, sales history for the same or similar items, price list with effective date and/or copies of catalog pages along with any applicable discounts. Failure to submit the requested information may result in disqualification of the submitted quote.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Items.

(MAY 2022)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan

2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015

(Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Aug 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

xx (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (June 2020), with Alternate I (Oct

1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Jun 2020) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009

(Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and

Reinvestment Act of 2009.)

xx (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L.

109-282) ( 31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016)

(Pub. L. 111-117, section 743 of Div. C).

xx (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Jun 2020) (31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41

U.S.C. 2313).

__ (10) [Reserved].

__ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Sep 2021) (15 U.S.C. 657a).

__ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Sep 2021)

(if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (13) [Reserved] xx (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-6.

__ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

__ (17) (i) 52.219-9, Small Business Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Sep 2021) of 52.219-9.

__ (18) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (Mar 2020) of 52.219-13.

xx (19) 52.219-14, Limitations on Subcontracting (Sep 2021) (15 U.S.C. 637s).

__ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Sep 2021) (15

U.S.C. 657f).

xx (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (Sep 2021) (15 U.S.C.

632(a)(2)).

__ (ii) Alternate I (Mar 2020) of 52.219-28.

__ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-

Owned Small Business Concerns (Sep 2021) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business

Concerns Eligible Under the Women-Owned Small Business Program (Sep 2021) (15 U.S.C. 637(m)).

__ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

__ (26) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15U.S.C. 637(a)(17)).

xx (27) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

xx (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan2020) (E.O.13126).

xx (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

xx (30) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

__ (ii) Alternate I (Feb 1999) of 52.222-26.

__ (31) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

__ (ii) Alternate I (Jul 2014) of 52.222-35.

__ (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

__ (ii) Alternate I (Jul 2014) of 52.222-36.

__ (33) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

__ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

xx (35) (i) 52.222-50, Combating Trafficking in Persons (Oct 2020) (22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

xx (36) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

__ (37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May

2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons

(Jun 2016) (E.O. 13693).

__ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air

Conditioners (Jun 2016) (E.O. 13693).

__ (40) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and

13514).

__ (ii) Alternate I (Oct 2015) of 52.223-13.

__ (41) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) (42 U.S.C. 8259b).

__ (43) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s

13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

xx (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O.

13513).

__ (45) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

__ (46) 52.223-21, Foams (Jun2016) (E.O. 13693).

xx (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (Jan 2017) of 52.224-3.

__ (48) 52.225-1, Buy American-Supplies (Jan2021) (41 U.S.C. chapter 83).

__ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (Jan 2021)(41 U.S.C.chapter83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (Jan 2021) of 52.225-3.

__ (iii) Alternate II (Jan 2021) of 52.225-3.

__ (iv) Alternate III (Jan 2021) of 52.225-3.

__ (50) 52.225-5, Trade Agreements (Oct 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov2007) (42 U.S.C. 5150).

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) (42 U.S.C.

5150).

__ (55) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021) .

__ (56) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10

U.S.C. 2307(f)).

__ (57) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

xx (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31

U.S.C. 3332).

__ (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul

2013) (31 U.S.C. 3332).

__ (60) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

xx (61) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

__ (62) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

__ (63) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) ( 46 U.S.C.

55305 and 10 U.S.C. 2631).

__ (ii) Alternate I (Apr 2003) of 52.247-64.

__ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

__ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

__ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment

(Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May

2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

__ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of…