RFQ_25-222_Exhibit_A_-_SOW.pdf
PDF 277 KB Posted
- Solicitation number
- 0000040513
- Issued by
- California
About this file
This is a Scope of Work and Budget Details document from the California Department of Justice for RFQ 25-222 concerning the procurement and maintenance of analytical laboratory equipment. The Department of Justice is seeking to acquire one Agilent 5977C Inert Plus MSD Turbo EI Bundle with associated components including an 8890 100psi split/splitless inlet accessory, MSD interface, helium conservation module, and factory plumbing for installation at the DOJ laboratory located at 7425 Mission Boulevard, Jurupa Valley, California 92509. The equipment shall be shipped F.O.B. destination to the specified address. The contract term is estimated at 11 months and 30 days, commencing November 19, 2026, and concluding November 18, 2028, with delivery as the baseline for commencement. Installation is included in the hardware purchase, and the contractor is required to provide an enhanced extended warranty for two years covering all instrument parts, consumables, and supplies, along with annual onsite preventive maintenance beginning after the first year of coverage and onsite repair visits as needed.
The contractor must provide hardware maintenance services during normal DOJ business hours, Monday through Friday from 8:00 a.m. to 5:00 p.m. Pacific Time, excluding state holidays, with services available either virtually or onsite. The contractor is responsible for all travel costs, including lodging and parking, and must assign only factory-trained, authorized personnel to service the equipment. Invoicing shall be submitted with Net 45 payment terms, and the State will process payments within 45 days of invoice acceptance in accordance with the California Prompt Payment Act. The total contract amount is not specified in the provided excerpt but is referenced in Attachment A, Cost Worksheet. All contractor staff must be located within the United States, and the contractor assumes full liability for performance and compliance with DOJ regulations, policies, and information security requirements, including adherence to the California Information Practices Act and CJIS Security Policy.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| California_Civil_Rights_Laws_Certification.docx | DOCX document | |
| CalRecycle_74_-_Postconsumer-Content_Certification.pdf | ||
| RFQ_25-222.docx | DOCX document | |
| Bidder_CUF.pdf | ||
| RFQ_25-222_Attachment_A_-_Cost_Worksheet.xlsx | XLSX spreadsheet | |
| Bidder_Declaration-105.pdf | ||
| STD_205_-_Payee_Data_Record_Supplement.pdf | ||
| STD_204_-_Payee_Data_Record_-_Rev._03-21.pdf | ||
| Std._843_DVBE_Declaration.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
California Department of Justice RFQ # 25-222 Hardware and Hardware Maintenance
EXHIBIT A – SCOPE OF WORK
I. INTRODUCTION
The Contractor shall provide one Agilent 5997C Inert Plus MSD Turbo EI Bundle with installation and warranty to include the following:
Agilent 5977C Inert Plus MSD Turbo EI Bundle (QTY: 1):
Ship to Country: USA Country of Origin: United States 8890 100psi Split/splitless Inlet Accy MSD Interface in Rear Inlet Position Helium Conservation Module Factory plumbing For quick installation Exhaust Deflector Assy Signal and Remote Start Cables Introduction
Installation included in purchase of the GCMS system.
Installation
Enhanced Extended Warranty 2 yrs
Onsite Repair Visits Coverage for all instruments parts, consumables, and supplies Annual onsite preventive maintenance, after 1st year of coverage
II. TERM OF THE CONTRACT
The estimated term of this contract will be 11/19/2026 to 11/18/2028, based on delivery.
III. CONTRACT MANAGER
A. The Contract Managers (CM) for this Agreement are as follows:
DOJ Contractor
Name: <TBD> <TBD> Street Address: 7425 Mission Boulevard <TBD> City, State Zip Code: Jurupa Valley, CA 92509 <TBD> Phone: <TBD> <TBD> Email: <TBD> <TBD>
B. The CMs will operate as the DOJ single point of contact for each party. DOJ’s CM will give directions to the Contractor concerning the assigned services to be provided. The Contractor’s CM shall work collaboratively with the DOJ Management Team, Program Managers, Functional Managers, and technical staff to ensure that all services are satisfactorily completed. The CMs shall ensure that all Agreement activities are conducted in accordance with DOJ regulations; oversee processes and procedures; monitor contractor compliance with the Agreement; and resolve issues.
C. The DOJ and Contractor reserve the right to change their CMs at any time without amending this agreement, by notifying the other party of the change in writing.
IV. HARDWARE SERVICE PHONE NUMBER
For hardware service calls, DOJ can call: <TBD>.
V. EQUIPMENT SUPPLIES SHIPPING INSTRUCTIONS
All supplies must be shipped F.O.B. (Free on Board) Destination. The seller pays the freight charges.
All supplies must be shipped to:
California Department of Justice Address: 7425 Mission Blvd.
City/State: Jurupa Valley, CA 92509 Attn: <TBD> Phone Number: <TBD>
VI. WORK TO BE PERFORMED
A. DESCRIPTION
The Contractor will be responsible for providing hardware maintenance services for the Agilent 5997C Inert Plus MSD Turbo EI Bundle.
B. RESOURCE AVAILABILITY/WORK HOURS
The Contractor shall be available to provide services at any time during normal DOJ business hours, Monday through Friday, between 8:00 a.m. and 5:00 p.m.
Pacific Time (PT), excluding State holidays, except as specifically agreed to otherwise in writing by the DOJ CM.
C. RESOURCE LOCATION
The Contractor shall provide services either virtually or onsite at the DOJ laboratory, 7425 Mission Blvd., Jurupa Valley, CA 92509 or other DOJ locations, as mutually agreed upon.
All Contractor Staff including any subcontractors must be located within the United States of America.
D. PROBLEM ESCALATION
Problems or issues shall normally be reported to CM in a timely manner. The Contractor shall endeavor to have any issues resolved at the lowest level possible. However, the parties acknowledge and agree that certain problems or issues may arise that cannot be solved at the lowest level and therefore justify escalated reporting. To this extent, the Contractor’s Contract Manager shall follow the escalation path identified below.
1. First level: DOJ Contract Manager
2. Second level: DOJ Bureau Director (in charge of this contract)
3. Third level, the CJIS Assistant Chief
E. TRAVEL
All travel costs for this contract will be the sole responsibility of the Contractor.
VII. AGREEMENT PARTIES RESPONSIBILITIES
A. CONTRACTOR RESPONSIBILITIES
The Contractor has the following responsibilities:
1. The Contractor shall ensure that the equipment is fully functional and operational with minimal downtime and resolve issues timely.
2. The Contractor shall only assign authorized factory trained personnel to service and maintain the equipment.
3. Perform quality control reviews on all services before completion.
4. All assigned personnel must check-in and be escorted by DOJ staff when on location at DOJ.
5. Designate a person to whom all communications may be addressed and who has the authority to act on all aspects of the Agreement. This person shall be responsible for the overall engagement and shall be the primary person responsible for ensuring quality services are delivered timely by the team member(s) performing the services. This person also has responsibilities for addressing invoicing and staffing issues.
6. Comply with all applicable DOJ regulations, mandates and policies and procedures. Contracted staff are expected to abide by the same standards and policies as DOJ staff.
7. Complete all tasks as required in the Agreement.
8. The Contractor will assume all costs related to travel, lodging, and parking
(parking at DOJ Broadway facility is free of charge) unless noted in the Agreement.
9. Information Security - Contractor shall comply with applicable United States and California laws and regulations; including but not limited, California Information Practices Act of 1977, the California State Administrative Manual (SAM) and its associated regulations, mandates, budget letters and memorandums, the SIMM and CJIS Security Policy.
10. General Policies and Standards - Contractor must strictly adhere to all DOJ policies and standards, including but not limited to health and safety, data security and confidentiality.
B. DOJ RESPONSIBILITIES
The responsibilities of the DOJ include the following:
1. Provide subject Matter Experts (SMEs), key stakeholders/process owners, working session participants and documentation to assist with successful implementation of services.
2. DOJ will provide access to business and technical documents as necessary for the Contractor and Contractor’s resources to complete the tasks and deliverables identified in the SOW.
3. Provide the Contractor access to the appropriate facilities during the effort.
4. Provide access to DOJ business and technical staff as scheduled and agreed upon.
5. Approve invoices and ensure payments are made in a timely manner.
6. Upon request and prior approval, DOJ may provide a virtual desktop with access at the sole discretion of DOJ.
VIII. FAILURE TO PERFORM
The Contractor assumes all liability for performance of this Agreement and all subcontracts executed pursuant to or funded by this Agreement.
Further, the Contractor assumes full liability for and agrees to reimburse the DOJ for Contractor’s or any of Contractor’s subcontractors’ failure to comply with any term or condition of this Agreement. Contractor shall assure that subcontracts are administered in accordance with this Agreement, any amendments, any change orders, or changes thereto, and in compliance with DOJ Regulations. Contractor agrees that the DOJ or its designated agent has full recourse against the Contractor for the failure to perform all or any part of this Agreement.
Failure to provide acceptable service, and provide status information on time, may subject Contractor to the DOJ pursuing remedies under this Agreement in accordance with the Terms and Conditions.
IX. AMENDMENTS
The Contractor will agree to allow amendment(s) to this contract to increase time and funding at the same or lower rate as stated in Attachment A, Cost Worksheet.
The Contractor shall not be authorized to deliver or commence performance of services as described in the Contract until written approval has been obtained from all entities. Any delivery or performance of service commenced prior to the Contractor obtaining all written approvals shall be considered voluntary on the part of the Contractor and non-compensable by DOJ.
No amendment or variation of the Contract terms shall be valid unless made in writing, signed by both parties, and approved as required. No oral understanding not incorporated in the Contract is binding on any of the parties.
EXHIBIT B – BUDGET DETAILS AND PAYMENT PROVISIONS
I. PAYMENT
For full and satisfactory performance of the services provided pursuant to this contract, the Department of Justice shall pay the Contractor per Attachment A, Cost Worksheet. The total amount which may be paid under this contract shall not exceed the amount indicated in Attachment A, Cost Worksheet with the actual amount being dependent upon the extent of the Contractor's services required by the Department of Justice.
The Contractor understands that no Federal or State income tax shall be withheld from the payments under this contract. However, the State of California is required to report all payments to the Internal Revenue Service and Franchise Tax Board for tax purposes.
II. INVOICING
The Contractor shall submit invoices with payment terms of Net 45. An invoice can only be submitted for items noted on the Purchase Order (PO) and must be submitted to the “Bill To” address and person listed on the PO. Invoices must be submitted on Contractor’s letterhead and must include the following:
1. Purchase Order Number
2. Contractor’s name, address, phone number
3. Invoice number and invoice date
4. Date(s) of service
5. Identify in detail the IT goods and/or services acquired, quantities, unit price, extension, description, etc.
6. Distinguish if the item is hardware, software, hardware maintenance, software maintenance, or services
7. Sales tax and/or use tax, identify which items are taxable and non-taxable, tax rate, and input the tax as a separate line item from the goods lines
8. Total amount of invoice
The DOJ will not reimburse the Contractor for any incurred expenses related to this Agreement not specified in Attachment A, Cost Worksheet. Payment is subject to the acceptance of invoice by the DOJ Contract Manager, or designee.
Contractor shall address and submit all invoices electronically in PDF format to:
<TBD>
III. BUDGET CONTINGENCY CLAUSE
It is mutually agreed that if the Budget Act of the current year and/or any subsequent years covered under this contract does not appropriate sufficient funds for the program, this contract shall be of no further force and effect. In this event, the State shall have no liability to pay any funds whatsoever to Contractor or to furnish any other considerations under this contract and the Contractor shall not be obligated to perform any provisions of this contract.
If funding for any fiscal year is reduced or deleted by the Budget Act for purposes of this program, the State shall have the option to either cancel this contract with no liability occurring to the State or offer a contract amendment to Contractor to reflect the reduced amount.
IV. PROMPT PAYMENT CLAUSE
Payment will be made, in accordance with the provisions of the California Prompt Payment Act, Government Code section 927, et seq. Unless expressly exempted by statute, the Act requires state agencies to pay properly submitted, undisputed invoices not more than 45 days after (a) the date of acceptance of goods or performance of services; (b) receipt of an undisputed invoice - whichever is later
V. PRIME CONTRACTOR DVBE CERTIFICATION
The provisions for payment under the Contract may be subject to a ten thousand dollars ($10,000) withhold in accordance with Military and Veterans Code sections
999.5 and 999.7.
File details come from the government source that posted it. Updated .