RFQ 18P 260707-003 Spec Sheet.xlsx
XLSX spreadsheet 17 KB Posted
- Attached to
- Steel Service Body, 2026 GMC K2500HD
- Solicitation number
- RFQ - 18P - 26070700000000000003
- Issued by
- Kennebec County, Maine
About this file
This is a specification sheet for RFQ 18P 260707-003, issued for the procurement of a heavy-duty galvanized steel service body to be installed on a 2026 GMC K2500 vehicle. The specification details a fully welded, galvanized steel service body with stainless steel hardware, measuring 96 inches in length and 78 inches in width, featuring a telescoping sliding roof, slammable tailgate, and multiple exterior compartments on both street and curb sides. The body includes front compartments (40"h x 31"w x 20"d with two adjustable shelves per side), horizontal compartments (44"w x 20"d), and rear compartments (40"h x 21"w x 20"d with one shelf per side). The specification calls for installation at the government's Augusta location, with the vehicle to be returned upon completion. Additional requirements include FMVSS lighting package compliance, Class IV trailer hitch rated for 6,000 lbs minimum weight carrying capacity, backup alarm, relocated backup camera, and a 7-way RV style trailer connector with integral electric brake controller.
The specification sheet provides detailed material and construction requirements, including 14-gauge galvanized steel or galvanneal construction for the body shell, 12-gauge smooth plate flooring with Rhinoliner coating, and comprehensive hardware specifications. The exterior finish is specified as Aliphatic polyurethane enamel (such as Dupont Imron) in yellow (code T009-YL14) with reflective gray or white interior paint. All steel surfaces are to be galvanized with epoxy primer and fully undercoated with petroleum-based material. The specification sheet includes a vendor response table requesting unit cost, total cost, possible quantity, bidder contact information, and estimated delivery time, indicating this is a competitive solicitation requiring detailed pricing and delivery proposals from qualified vendors.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ 18P 260707-003.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| SPEC# 164-516 | STEEL SERVICE BODY |
| GENERAL DESCRIPTION | Heavy duty galvanized steel service body, fully welded construction. All stainless steel latches, hinges, and hardware. |
| MINIMUM SPECIFICATIONS |
| APPLICATION | 2026 GMC K2500, SRW, Reg.Cab, 4wd, 6.6 V-8 gas, with 8' bed. 10250 GVW, 142" WB, CA 56" | |
| BODY SIZE | Length: 96" Width: 78" Floor Width: 48" Cabinet Height: 40" | |
| BODY SHELL | 14 gauge two-sided galvanized steel or galvanneal. Compartment top and back to be one piece seamless design. Drip rails above all doors. All doors, door openings, drip rails, and other exposed steel edges to be hemmed for strength and safety. Eight mounting points, four per side. Undercoated steel rock guards at rear of wheel wells. Aluminum rock guards at front of body. | |
| BODY COVER | Telescoping sliding roof, 2 piece, compatable with slam tailgate, lockable | |
| FLOOR | 12 gauge smooth plate with 1-3/8" return flange on each side. Cargo tie-downs mounted in each of the 4 corners. Rhinoliner (or equivalent) on floor and 1/2 way up cabinet in load area. | |
| TAILGATE | 12" Slammable tailgate, pickup style release handle in the center, 14 gauge double panel construction, parallel to floor when in the down position | |
| WEATHER STRIPPING | Heavy duty, closed cell automotive type | |
| EXTERIOR COMPARTMENTS CONSTRUCTION | Side compartment back panel overlaps and interlocks with floor flange for compartment weight support. 20 gauge 2 sided galvanized steel double panel exterior doors with 2 stage slam type rotary latches, heavy duty adjustable strikers, theft proof replaceable hinges, keyed alike locks. Single chains or cables on all vertical doors. Double chains or cables on all horizontal doors. Shelves to be 18 gauge galvanized, hemmed, rated for 250lb. capacity, with multiple divider kits. Drains and vents in all compartments. Note-All stainless steel latches, hinges, & hardware!! | |
| EXTERIOR COMPARTMENTS LAYOUT | Street Side & Curb side: Front Compartments= 40"h x 31"w x 20"d with two adjustable shelves per side. Horizontal compartments= 44"w x 20"d with no shelves. Rear Compartments=40"h x 21"w x 20"d with one shelf per side. | |
| LIGHTS | FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights, clearance lights and reflectors. License plate light with bracket. | |
| PAINT | All steel surfaces galvanized and epoxy primer. Exterior paint to be Aliphatic polyurethane enamel such as Dupont Imron, yellow, code T009-YL14. Interior color to be reflective gray or white. All undercarriage surfaces to be fully undercoated with petroleum base material. | |
| BUMPER & TRAILER HITCH | 8" steel tread plate step (no recess), Class IV trailer hitched rated for a minimum 6000 lbs weight carrying! | |
| FUEL FILL CONE | Aluminium or stainless steel, marked "Unleaded Fuel Only". | |
| INSTALLATION | Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors | |
| ACCESSORIES | Back up Alarm, Relocate back up camera to the new utility body. 7 way RV style trailer connector (Integral Electric brake controller equipped from factory). | |
| MAKE | Model |
| Possible Quantity | Unit Cost | Total Cost |
| 1 |
Bidder (Vendor) Contact Person Contact's Telephone
VENDOR COMMENTS
ESTIMATED TIME FOR DELIVERY:
Sheet2
Sheet3
File details come from the government source that posted it. Updated .