RFQ 17D 250501-235.docx

STATE OF MAINE

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

RFQ # 17D 250501-235

Hook lift Roll off System to Create Master Agreement Steller Model #138 or Swap loader Model SL400 or Equivalent

Quotations/Responses Due: Wednesday, May 14, 2025, not later than 4:00 p.m. local time

Note: All questions and responses must be provided via the State of Maine’s e-Procurement system: AdvantageME / Vendor Self Service (VSS).

General Instructions on Bidder Questions It is the responsibility of each Bidder to examine the entire RFQ and to seek clarification by submitting questions through the Q & A List tab on the Solicitation page in the CGI Vendor Self Service (VSS). Any answers to questions will appear there as well. It is the vendor's responsibility to log in to view all questions and answers posted. Additional information obtained any other way will not be valid.

In the event that you must contact us for any other reasons than the Q & A previously mentioned, only the Buyer listed on the Solicitation page may be contacted from the time this RFQ is issued until award notification is made. No other person/State employee is empowered to make binding statements regarding this RFQ. Violation of this provision may lead to disqualification from the bidding process, at the State’s discretion.

Summary For this competitive Request for Quotations (RFQ) process, the State of Maine Office of State Procurement Services (“OSPS”) is acting on behalf of the Department of Transportation (“Requesting Department”). OSPS and the Requesting Department seek quotations (also referred to as “bids” or “responses” herein) to provide the goods/services listed above. This document provides instructions and descriptions of requirements for this competitive process.

RFQ REQUIREMENTS

1. Required Documents

All bids MUST include the following documentation, or the bid will be deemed incomplete and will not be evaluated.

· Appendix B: Bid Specifications – Pages 13 through 20

· Appendix F: Maine DOT Certifications – All pages of this appendix must be attached to the bid in the Vendor Self Service (VSS)

· Appendix G: Maine DOT Terms and Condition – All pages of this appendix must be attached to the bid in the VSS

· Equivalency Documentation: An equivalency document must be attached for any specification identified as equivalent in bid documents. Equivalency will be determined by the requesting Department.

2. Other Bid Documents

In addition to the required documents, cost, delivery, and other information required in VSS, all bids should contain the following information. All documents listed below, if not attached to the bid, MUST be received within fifteen (15) days of notification of intent to award or the contract will not be executed.

· Warranty Information

· Appendix A: Bid Cover Page and Responsible Bidder Form

· Appendix D: Municipality, Political Subdivision Participation Certification

· Appendix E: Master Agreement Vendor Contact and Signor Information

3. Contract Term

In addition to any mutually agreed upon delivery dates for purchases of goods, the contract resulting from this RFQ will have a term, or “Period of Performance”, during which the contract is considered to be in effect. The anticipated contract term is defined in the table below. Please note that the dates below are estimated and may be adjusted as necessary in order to comply with all procedural requirements associated with this RFQ and the contracting process. The actual contract start and end dates will be established by the completed and approved contract.

Contract Renewal: Following the initial term of the contract, OSPS, at their discretion, may opt to renew the contract for four (4) extension periods as defined below.

The term of the anticipated contract, resulting from this RFQ, is defined as follows:

4. Submitting a Quotation

a. Quotations Due: Quotations must be received no later than 4:00 p.m. Eastern Standard Time (EST), on the date listed in VSS. Quotations received after the 4:00 p.m. deadline will not be accepted.

b. Submission Instructions: Bidders must submit their bids in the State of Maine’s electronic procurement system: Advantage “Vendor Self Service” (VSS). More information on this system can be found at the following internet link: https://www.maine.gov/dafs/bbm/procurementservices/vendors/vendor-self-service-system

c. Multiple Quotations: Unless specifically prohibited in Section 1 of this RFQ, Bidders are permitted to submit multiple quotations for this RFQ, offering alternative items or pricing for the State of Maine to consider in its best value determination.

d. Withdrawal of a Quotation: Bidders are permitted to withdraw their own quotations up until the due date and time for receipt of quotations. To do so, a Bidder must enter the VSS system (as referenced above), identify and open their submitted quotation located in the Solicitation Responses tab, and click the “Withdraw” button found at the bottom of the screen. Quotations cannot be withdrawn after the due date and time for receipt of quotations.

e. Attachments: Any attachments provided with the Advantage VSS bid submission must be in MS Word, MS Excel, or Adobe (.pdf) format, unless otherwise specified in Section 1 of this RFQ. Vendors are encouraged to submit supporting documentation that aid the requesting department in understanding how the bid conforms to the requirements. The VSS attachment file size limit is 15Mb. Please contact the buyer for this RFQ if you must submit attachment files larger than this.

f. Vendor specifications: Unless otherwise stated in this RFQ document, limited specification information will be required upon submission of a bid in response to this RFQ. However, a Bidder’s response should include an affirmative statement that their bid complies with all requirements of this RFQ, unless the Bidder specifically addresses how its bid differs from the specifications, and why the differences should be deemed acceptable by the State.

5. General Instructions

a. The Bidder must submit a cost quotation response that covers the goods and term of the contract, including any optional renewal.

b. The cost quotation shall include the costs necessary for the Bidder to fully comply with the contract terms and conditions and RFQ requirements.

c. Failure to provide the requested information may result in the exclusion of the quotation from consideration, at the discretion of OSPS.

d. No costs related to the preparation of the quotation for this RFQ or to the negotiation of the contract with the Department may be included in the quotation.

e. The State is exempt from the payment of Federal, State and local Taxes on articles not for resale. Please provide quotations that do not include these taxes. Upon application, an exemption certificate can be furnished by the State at the point of contract finalization.

6. Quotation Evaluation and Selection

Evaluation of the submitted quotations shall be accomplished as detailed below:

a. State of Maine RFQ documents are evaluated on a Best Value basis. The term “Best Value” may take into consideration the qualities of the goods or services to be supplied, their conformity with the specifications listed in the RFQ, the purposes for which they are required, the date of delivery, and the best interest of the State. Once the goods or services have been determined to conform to the specifications then OSPS will make its award decision based on the lowest price among the Bidders. Delivery days can be a factor in awarding.

b. The State reserves the right to not make an award to the lowest price bidder when that bidder has had documented poor performance, and/or a contract terminated or not renewed within the last five years.

c. At the discretion of OSPS, if a Bidder’s submission is deemed to not conform to the specifications listed in the RFQ, or otherwise not conform to the requirements of the RFQ, then that Bidder’s submission may not be considered for contract award.

d. In the event that no Bidder submission conforms to the specifications of this RFQ, then OSPS may choose not to make any award. Alternatively, OSPS may make an award to the Best Value Bidder whose specifications most closely meet the specifications of this RFQ. For example, if there are five specification requirements, and two responses are received with one Bidder meeting four requirements, and one bidder meeting three requirements, then OSPS, at its discretion, may make a contract award to the Bidder meeting four requirements.

e. If the specifications provided with this RFQ are of a technical nature, then OSPS’s RFQ Coordinator, at his or her discretion, may seek to use an evaluation team comprised of subject matter experts, end-users from the Requesting Department, or other State Department representatives. In such a case, the evaluation team will judge the merits of the quotations received in accordance with the best value criteria defined in the RFQ.

7. Negotiations

a. No Best and Final Offers: The State of Maine will not seek a best and final offer (BAFO) from any Bidder in this procurement process. All Bidders are expected to provide their Best Value pricing with the submission of their quotation.

b. OSPS reserves the right to negotiate with the successful Bidder to finalize a contract at the same rate or cost of goods and services as presented in the selected quotation. Such negotiations may not significantly vary the content, nature or requirements of the quotation or the RFQ to an extent that may affect the price of goods or services requested. OSPS reserves the right to terminate contract negotiations with a selected Bidder who submits a proposed contract significantly different from the quotation submitted in response to the RFQ.

c. In the event that an acceptable contract cannot be negotiated with the highest ranked Bidder, OSPS may withdraw its award and negotiate with the next-highest ranked Bidder, and so on, until an acceptable contract has been finalized. Alternatively, OSPS may cancel the RFQ, at its sole discretion.

TERMS AND CONDITIONS FOR RFQ AND CONTRACT

PART I GENERAL INFORMATION ON RFQs

A. Purpose and Background

The State of Maine (“State”) Department of Administrative and Financial Services (“Department”), Office of State Procurement Services (“OSPS”) acts as the purchasing agent on behalf of all Executive Departments and other agencies within State Government. For this competitive Request for Quotations (RFQ) process, OSPS is acting on behalf of the Requesting Department listed on the cover page. OSPS and the Requesting Department seek quotations (also referred to as “bids” or “responses” herein) to provide the goods/services as defined above in Section 1 of this document. This document provides instructions for submitting quotations, the procedure and criteria by which the Bidder(s) will be selected, and the contractual terms which will govern the relationship between the State and the awarded Bidder(s). Following Bidder selection and upon reaching a mutual agreement, the State and the selected Bidder will enter into a contract – taking the form of a State of Maine Master Agreement or Buyer Purchase Order (all generally referred to as “contract” herein), as applicable.

B. General Provisions

http://www.mainelegislature.org/legis/statutes/1/title1sec401.html

C. Eligibility to Submit Bids

Public agencies, private for-profit companies, and non-profit companies and institutions are invited to submit bids in response to State of Maine Requests for Quotations.

D. Delivery Terms

For the purchase of goods, OSPS and selected Bidder will decide upon a delivery date in accordance with the State’s requirements and the terms offered in the Bidder’s quotation. Unless stated otherwise in Section 1 of this RFQ, all deliveries are expected with shipping terms of “Free on Board (FOB) – Destination”. The State intends for this to mean that all goods shall be priced in the bid response to include shipping charges, if any, to the State’s desired location. The “FOB – Destination” shipping term is also intended to mean that the State shall not bear any responsibility for the goods in question until the State takes possession of them at the destination point of delivery.

E. Alternate Bids and Approved Equals

When, in bid forms and specifications, an article or material is identified by using a trade name and catalog number of a manufacturer or vendor, the term “or approved equal,” if not inserted with the identification, is implied. Any Bidder that seeks to propose an alternate item from what is specified in this RFQ should refer to State of Maine Statute 5 MRSA §1825-B, for “Bids, awards and contracts”, found here: http://www.mainelegislature.org/legis/statutes/5/title5sec1825-B.html

F. Appeal of Contract Awards

Any person aggrieved by the award decision that results from this RFQ may appeal the decision to the Director of the Bureau of General Services in the manner prescribed in 5 MRSA § 1825-E and 18-554 Code of Maine Rules, Chapter 120 (found here: Chapter 120). The appeal must be in writing and filed with the Director of the Bureau of General Services, 9 State House Station, Augusta, Maine, 04333-0009 within 15 calendar days of receipt of notification of contract award.

If this RFQ results in the creation of a pre-qualified or pre-approved list of vendors, then the appeal procedures mentioned above are available upon the original determination of that vendor list, but not during subsequent competitive procedures involving only the pre-qualified or pre-approved list participants.

PART II CONTRACT ADMINISTRATION AND CONDITIONS

A. Contract Document

The successful Bidder will be required to execute a contract in the form of a State of Maine Buyer Purchase Order, Contract Agreement to Purchase Services or State of Maine Master Agreement.

The Terms and Conditions used with the aforementioned contract types may be found on the Office of State Procurement Services’ website at the following links:

BPO and MA Terms and Conditions

In the event that the State of Maine’s Standard Terms and Conditions or RFQ provisions do not otherwise cover contractual scenarios that are specific to the goods or services being purchased under this RFQ, then the State is willing to consider a Bidder’s standard terms and conditions. Consideration or use of a Bidder’s standard terms and conditions shall only occur under the general agreement that in the event of a conflict, the State of Maine’s Standard Terms and Conditions and RFQ provisions shall take precedence.

Other forms and contract documents commonly used by the State can be found on the Office of State Procurement Services’ website at the following link: https://www.maine.gov/dafs/bbm/procurementservices/forms

B. Independent Capacity

In providing services and performing under the contract, the successful Bidder shall act independently and not as an agent of the State of Maine.

C. Payments and Other Provisions

The State anticipates paying the selected Bidder for goods and services received, on the basis of net 30 payment terms, upon the receipt of an accurate and acceptable invoice. An invoice will be considered accurate and acceptable if it contains a reference to the State of Maine contract number, contains correct pricing information relative to the contract, and provides any required supporting documents, as applicable, and any other specific and agreed-upon requirements listed within the contract that results from this RFQ.

The State of Maine reserves the right to pay for goods purchased through this solicitation by any of several available means, which include but may not be limited to check, EFT, and/or procurement card. Bidders are advised that state statute precludes sellers from imposing a surcharge on credit or debit card purchases (text follows):

“9-A MRSA §8-509 (1): A seller in a sales transaction may not impose a surcharge on a cardholder who elects to use a credit card or debit card in lieu of payment by cash, check or similar means.”

Appendix A

STATE OF MAINE

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

RFQ # 17D 250501-235

Hook lift Roll off System to Create Master Agreement Steller Model #138 or Swap loader Model SL400 or Equivalent

BID COVER PAGE

Bidder’s Organization Name:

Chief Executive - Name/Title:

Headquarters Street Address:

Headquarters City/State/Zip:

(provide information requested below if different from above)

Lead Point of Contact for Bid - Name/Title:

Street Address:

City/State/Zip:

By signing below Bidder affirms:

· Their bid complies with all requirements of this RFQ;

· This bid and the pricing structure contained herein will remain firm for a period of 180 days from the date and time of the bid opening;

· That no personnel currently employed by the Department or any other State agency participated, either directly or indirectly, in any activities relating to the preparation of the Bidder’s proposal;

· That no attempt has been made or will be made by the Bidder to induce any other person or firm to submit or not to submit a proposal; and

· The undersigned is authorized to enter into contractual obligations on behalf of the above-named organization.

Name:

Title:

Authorized Signature:

Date:

State of Maine RFQ# RFQ 17D 250501-235 Rev. 1/28/2025 Responsible Bidder Form

By signing this document, I certify to the best of my knowledge and belief that the aforementioned organization, its principals, and any subcontractors named in this proposal:

1. Are not presently debarred, suspended, proposed for debarment, and declared ineligible or voluntarily excluded from bidding or working on contracts issued by any governmental agency.

1. Have not within three years of submitting the proposal for this contract been convicted of or had a civil judgment rendered against them for:

0. fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a federal, state or local government transaction or contract.

0. violating Federal or State antitrust statutes or committing embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, or receiving stolen property;

0. are not presently indicted for or otherwise criminally or civilly charged by a governmental entity (Federal, State or Local) with commission of any of the offenses enumerated in paragraph (b) of this certification; and

0. have not within a three (3) year period preceding this proposal had one or more federal, state or local government transactions terminated for cause or default.

1. Have not entered into a prior understanding, agreement, or connection with any corporation, firm, or person submitting a response for the same materials, supplies, equipment, or services and this proposal is in all respects fair and without collusion or fraud. The above-mentioned entities understand and agree that collusive bidding is a violation of state and federal law and can result in fines, prison sentences, and civil damage awards.

· Failure to provide this certification may result in the disqualification of the Bidder’s proposal, at the discretion of the Department.

To the best of my knowledge all information provided in the enclosed proposal, both programmatic and financial, is complete and accurate at the time of submission.

Name:

Title:

Authorized Signature:

Date:

Appendix B

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

DETAILED SPECIFICATIONS

RFQ # 17D 250501-235

Equivalent Bid Items: Equivalent items may be bid; however all equivalent item bids MUST include documentation to prove equivalency. The final decision on equivalency will be determined by the requesting Department.

Master Agreement: The results of this bid process will be the creation of a Master Agreement Contract (MA) that will allow all State of Maine Departments and Agencies to purchase the listed items as needed. The State reserves the right to add other similar items or commodities to the MA if it’s in the State’s best interest but does not obligate the State to purchase similar noncontracted items or commodities from the selected bidder.

Prices: Bid Price must be with shipping terms of “Free on Board (FOB) – Destination”. The State intends for this to mean that all goods shall be priced in the bid response to include shipping charges, if any, to the State’s desired location. The “FOB – Destination” shipping term is also intended to mean that the State shall not bear any responsibility for the goods in question until the State takes possession of them at the destination point of delivery.

Delivery Locations: The vendor must deliver to any State of Maine facility.

Award: The State anticipates making a single award as a result of this RFP process. The State reserves the right not to make an award.

Delivery and Inspection: The requested items will be inspected after delivery. If shipment is deemed unacceptable the delivery will be refused and will be returned at the risk and expense of the selling vendor.

Intent: The purpose and intent of this specification is to describe the Purchase & Installation of a Hook Lift -Roll Off system designed to fit a 2023 Navistar Model HV513SFA tandem chassis. With a Wheelbase of approximately 276, CA of 162 and cab to end of frame is 215 with automatic transmission. MaineDOT estimates five (5) units during the initial period however the state reserves the right to order more or less as needed (depending on funding) for duration of the Master Agreement.

Completeness: The price quoted in any proposal submitted shall include all items of labor, materials, and other costs necessary to fully complete the manufacture and delivery of the service body pursuant to these specifications.

Any part or detail which makes the service body complete and ready for service shall not be omitted, even though such part or detail is not mentioned in these specifications.

Conformity: All parts not specified shall be manufacturer’s best quality and shall conform in materials, design, or workmanship to the best practice known in the service body industry. All parts shall be new and in no case, will used, reconditioned or obsolete parts be accepted. The parts on all platform/rack body provided by the manufacturer should be interchangeable.

Tariffs: Any price increases implemented by the vendor due to the imposition of tariffs shall remain in effect only for the duration that such tariffs are in place. In the event of the repeal or reduction of any applicable tariff(s), the provider shall immediately return to the original price list or make a proportional reduction in the price to reflect the decrease in tariff(s). Price adjustments under this clause shall be made in good faith and without undue delay upon confirmation via documents reflecting tariff changes

INSTRUCTIONS FOR COMPLETING TECHNICAL SPECIFICATION SHEET

Please complete the checklist for technical specifications set forth below. Electronically enter responses directly into the text-enabled fields next to each specification, including actual dimensions when applicable. Each Bidder must indicate whether it can meet the technical specifications by inserting an “X” next to each specification. The “X” will demonstrate that the Bidder’s offering meets the technical specification. If a Bidder cannot meet a technical specification, then the Bidder must give an explanation for each exception and for equipment that is not available or that will be dealer installed. All explanations must be provided in detail on separate pages along with the justification as to why the alternative equipment or deliverables will be as good as the equipment or deliverables described in the detailed specifications for desired items. A copy of the vendor specification proposal must be provided. Following these instructions is essential for proper bid evaluation.

If a Bidder fails to provide requested information or if information on a quote is found to be false or misleading, the quote will be rejected as unresponsive.

The award will be made on a best value basis to the vendor that either meets or most closely meets the specifications, while taking price and delivery into consideration.

It is understood that all specifications are minimums. Equivalent bid specifications may be considered. To have an “Equivalent Bid Specification” evaluated, the bidder must provide specifications and details for all specifications bid as “Equivalent Bid Specification.” Bids missing this information may be rejected.

Appendix C

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

COST RESPONSE

RFQ # 17D 250501-235

All responses to this RFQ will require a cost quotation response, in a format selected by the State of Maine. That format is described below.

All bids must be entered in the Vendor Self Service (VSS).

All bids must have a bid price (Unit Price). The price must be filled in using numbers and a decimal point only.

Example: If your bid is for one dollar you would enter 1.00

All bid must have the estimated days from award of contract to receipt of unit (Delivery Days). This will be entered as CALENDAR DAYS. Only numbers can be entered.

Example: If you expect to be able to deliver the unit in two weeks you would enter 14

Appendix D

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

MUNICIPALITY POLITICAL SUBDIVISION and SCHOOL DISTRICT PARTICIPATION CERTIFICATION

RFQ # 17D 250501-235

Hook lift Roll off System to Create Master Agreement Steller Model #138 or Swap loader Model SL400 or Equivalent

The Office of State Procurement Services is committed to providing purchasing opportunities for municipalities, political subdivisions and school districts in Maine by allowing them access, through our vendors, to our contract pricing. A bidder's willingness to extend contract pricing to these entities will be taken into consideration in making awards.

Orders from Municipality, Political Subdivisions and School Districts (Appendix D): If the bidder elects to permit Municipality, Political Subdivisions and School Districts to utilize the resulting Master Agreement Contract, The State of Maine will not be responsible for any order placed by these groups. All orders will originate from these groups and they will be liable for all payments.

Will you accept orders from political subdivisions and school districts in Maine at the prices quoted?

_____ Yes

_____ Yes, with conditions as follows:

______ No

Name of Company: __________________________________________________________

Address: ___________________________________________________________________

Signature: __________________________________________________________________

Printed Name: ______________________________________________________________

Date: ___________________________ Appendix E

STATE OF MAINE

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

MASTER AGREEMENT CONTRACT DOCUMENT VENDOR CONTACT INFORMATION

and MASTER AGREEMENT CONTACT DOCUMENT VENDOR SIGNER INFORMATION

RFQ # 17D 250501-235

Hook lift Roll off System to Create Master Agreement Steller Model #138 or Swap loader Model SL400 or Equivalent

This bid process will result in the creation of a Master Agreement Contract (MA) which will permit users to order contracted items as needed.

Ordering Procedures: Delivery Orders (DO) will be created in AdvantageME for all orders over $5000.00. If a DO is used, the DO will be emailed to the email address referenced on the MA as a .pdf file. Orders less than $5000.00 can be placed using a State of Maine issued P-Card (credit card).

Please provide the following information for the primary person users can contact to place orders less than $5000.00, follow up on orders and invoices:

Contact Person Name: _________________________________________________

The MA Documents will be emailed via DocuSign to be reviewed and signed, please provide the following information for the person who will sign the MA contract documents:

Contract Signer Name: ___________________________________________________

Appendix F

STATE OF MAINE

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

MaineDOT CERTIFICATIONS

RFQ # 17D 250501-235

Hook lift Roll off System to Create Master Agreement Steller Model #138 or Swap loader Model SL400 or Equivalent

1.0 NONCOLLUSION BIDDING CERTIFICATION

By submission of this Bid, each Bidder and each person signing on behalf of any Bidder certifies, and in the case of a joint bid, each party certifies as to its own organization, under penalty of perjury, that to the best of its knowledge and belief:

1. The prices in this Bid have been arrived at independently without collusion, consultation, communication, or agreement, for the purpose of restricting competition as to any other matter relating to such prices with any other Bidder or with any other competitor.

2. Unless otherwise required by law, the prices which have been quoted in this Bid have not been knowingly disclosed by the Bidder and will not knowingly be disclosed by the Bidder prior to opening, directly or indirectly, to any other Bidder or to any competitor; and,

3. No attempt has been made or will be made by the Bidder to induce any other person, partnership, or corporation to submit or not to submit a Bid for the purpose of restricting competition.

Dated

Printed name of Person Bidding

Title

2.0 EQUIPMENT PERFORMANCE AND WARRANTY DATA

The information provided on this form will be used in determining operating costs of the equipment. Bidder must complete this form and submitted with bid. Bids received without this information will be considered non-responsive to the bid.

1. EQUIPMENT:

2. DESCRIBE THE PROCESS FOR THE SUBMISSION OF WARRANTY CLAIMS FOR REIMBURSEMENT OUTLINED AND SUBMITTED WITH THE BID. (written process to follow for reimbursement of warranty claims)

3. EQUIPMENT INFORMATION:

YEAR: EQUIPMENT MAKE:

EQUIPMENT MODEL:

4. MANUFACTURER’S RECOMMENDED PREVENTATIVE MAINTENANCE SCHEDULE MUST BE PROVIDED

5. BASIC EQUIPMENT WARRANTY DESCRIPTION

6. NAME/LOCATION OF REPAIR FACILITY(S) (BOTH AUTHORIZED WARRANTY, PARTS & SERVICE PER REQUESTED LOCATION). It is desired that at least one facility is located within 75-mile radius each region headquarters: Scarborough, Augusta, Dixfield, Bangor and Presque Isle.

WARRANTY AND SERVICE FACILITIES

ADDRESS 1:

ADDRESS 2:

ADDRESS 3:

ADDRESS 4:

ADDRESS 5:

CONTACT NAME: TELEPHONE:

EQUIPMENT PARTS PROVIDER:

ADDRESS:

CONTACT NAME: TELEPHONE:

Attach written explanation describing the locations of the facilities, the contact name and number at each facility, the times the facilities will be available for use, the qualifications of the staff at the facilities and how the vendor will provide warranty and service at these service facilities.

Bidder certifies that they have service facilities in Maine, staffed with trained service technicians and stocked with repair parts for the equipment which is bid.

This form must be reproduced and completed for any additional equipment warranty/facility information.

Dated

Print Name

Company Name

3.0 SPECIFICATION COMPLIANCE

The bidder hereby certifies that the equipment(s) being bid in response to this invitation meet or exceed these specifications and that where a deviation from the specifications exists, the bidder has obtained written approval of those exceptions prior to submitting this bid.

If a conflict exists between these specifications and Federal and/or State laws, the Federal and/or State laws shall prevail and the bidder must alert the purchaser to any such conflicts.

Dated

Printed name of Person Bidding

Title Appendix G

STATE OF MAINE

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

MaineDOT Terms and Conditions

RFQ # 17D 250501-235

A. AGREEMENT

The Vendor shall deliver the equipment ordered in accordance with this Agreement and governed by these Terms and Conditions.

B. INDEPENDENT CAPACITY

In providing the equipment under the Agreement, the Vendor shall act independently and not as an agent of the State of Maine.

C. STATUS REPORTS

Prior to the start of work, the Vendor shall furnish MaineDOT with a proposed progress schedule in MaineDOT’s standard format. The Vendor will outline the various phases of work that will need to be completed in order to meet the schedule set forth by MaineDOT.

During equipment assembly, the successful bidder shall submit to MaineDOT’s Fleet Representative, a Monthly Status Report of accomplishments from the preceding month. The progress report shall be used to keep team members and MaineDOT’s Fleet Representative informed about project status and issues. Information will include:

1. A written statement describing the work accomplished during the period and to date.

1. An estimate of the percentage of work completed within the specified services.

1. Any information needed from MaineDOT to complete the project and avoid delays.

1. The successful bidder’s action plan to remedy and address any non-conforming or unacceptable work submitted to the Department.

1. Document anticipated problems and possible solutions.

These progress reports shall be submitted to MaineDOT on a monthly basis. Failure to submit could result in non-payment of the invoice, or be considered as a default, and shall be recorded in the Vendor’s Performance Evaluation. If work is temporarily delayed, the Vendor may suspend submittal of the monthly progress reports with written approval from MaineDOT. The Vendor shall be responsible for addressing any action that may be required to keep the project on schedule.

MaineDOT shall have a period of 15 business days after receipt of the submissions to complete the review and make any necessary comments. Following the review, the Vendor will make any revisions and corrections requested by MaineDOT.

D. PAYMENT AND OTHER PROVISIONS

MaineDOT anticipates paying the selected Vendor for goods and services received, on the basis of net 30 payment terms following acceptance of the equipment, the receipt of an acceptable title and required documents, and an accurate and acceptable invoice. An invoice will be considered accurate and acceptable if it contains the State of Maine Agreement number, correct pricing information relative to the Agreement, and provides any required supporting documents, as applicable, and any other specific and agreed-upon requirements listed within the Agreement.

MaineDOT reserves the right to pay for the equipment purchased by any of several available means, which include but may not be limited to check, EFT, and/or procurement card. Vendors are advised that state statute precludes sellers from imposing a surcharge on credit or debit card purchases (text follows):

“9-A MRSA §8-303 (2): A seller in a sales transaction may not impose a surcharge on a cardholder who elects to use a credit card or debit card in lieu of payment by cash, check or similar means.”

E. WARRANTY

For a period of one (1) year following equipment delivery and acceptance (the “Warranty period”), Vendor unconditionally warrants and guarantees that the equipment shall be free from defects in parts and workmanship. If MaineDOT discovers any defects during the Warranty period, the Vendor’s obligation will be to repair or replace the equipment or refund the purchase price, at MaineDOT’s sole option subject to the following requirements as applicable:

· Replacement will be with new equipment matching the specifications within this Agreement.

· Reimbursement will be for the total purchase price of the equipment including the cost of returning the equipment.

· All Repairs including the cost of transporting the equipment will be borne by the Vendor. All repairs will be warranted free from defects in parts and workmanship for a one-year period following the repair.

The Vendor hereby assigns to MaineDOT the right to enforce all manufacturer’s warranties or guarantees on the equipment.

The Vendor agrees that the warranty obligations provided by this Agreement shall be reported as an outstanding obligation in the event of bankruptcy, dissolution, or the sale, merger, or cessations of operations of the Vendor.

In the event of a breach of Vendor’s warranty obligations, MaineDOT shall notify Vendor in writing of the breach and grant Vendor 30 days to cure the breach. Should Vendor fail to cure the breach, MaineDOT may pursue whatever remedies may be available.

F. DAMAGES

Time is of the essence in the delivery of the equipment specified herein, and in event of delay(s) in the delivery of the equipment beyond the date set forth in the Agreement, or beyond authorized extensions thereof MaineDOT may impose liquidated damages. Because it is difficult to determine the actual amount of the damage by reason of such delay it is therefore agreed that the Vendor will pay the sum of one hundred dollars ($100.00) per unit for each calendar day(s) delay in delivery as liquidated damages and not as a penalty.

These damages shall be deducted from any monies due, or which may thereafter become due to the Vendor or may be recovered by through any lawful means.

G. SET-OFF RIGHTS

MaineDOT shall have all of its common law, equitable and statutory rights of set-off.

H. FORCE MAJEURE

Either party may be excused from performance under this Agreement to the extent the failure to perform is caused by acts of God or of the public enemy, fire, floods, epidemics, quarantine, restrictions, strikes, labor disputes, and freight embargos, or other causes beyond the party’s reasonable control. In the event of such event of force majeure, the affected party shall provide the other party written notice of the cause of delay within fifteen (15) days from the beginning of any such delay. The time of performance shall be excused to extent of the duration of any such event of force majeure, or such period of time as may be mutually agreed upon by the parties.

I. INDEMNIFICATION

The Vendor shall indemnify and hold harmless MaineDOT and its officers, agents, and employees from and against any and all claims, liabilities, and costs, including reasonable attorney fees, for any or all injuries to persons or property…