RFQ_10192711Discharge_Valve_Seat_Rings.pdf

SB/DVBE Request for Quotation # RFQ 10192711 Harvey O. Banks Pumping Plant Unit 3-7 Discharge Valve Seat Rings

Specification

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 1 of 16

C A L I F O R N I A D E P A R T M E N T O F W A T E R R E S O U R C E S

Supplier Instructions: Please review this Request for Quotation (RFQ) and submit a quotation to the Department of Water Resources (DWR) Contact listed below. A scanned and emailed PDF of your submission is acceptable and preferred. Facsimile machine (fax) quotations will not be accepted. To be considered responsive, the quotation must be received by the RFQ Due Date, and vendor must comply with the Administrative Requirements included in this RFQ.

RFQ Key Action Dates Release Date of RFQ February 24, 2025

RFQ Due Date March 24, 2025

SUBMIT RESPONSE BY ELECTRONIC MAIL (EMAIL)

A signed, scanned, and emailed PDF of your submission to the DWR Contact listed below is acceptable and preferred.

DWR Contact Information DWR Contact Name Joseph Ikeda DWR Contact Email Joseph.Ikeda@water.ca.gov DWR Contact Phone (209) 833-2070

Statement of Work: The Department of Water Resources, Delta Field Division is requesting quotes for the purchase of the following equal or equivalent items. Please review the General Information on page 3 and provide a quotation on your company’s official business letterhead with all the items on the quotation listed in the same order as below. The items are required by 02/19/2025 to be delivered to Delta Field Division.

Please complete the Administrative Requirements included in this document when responding to the request for quote.

Specification

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 2 of 16

C A L I F O R N I A D E P A R T M E N T O F W A T E R R E S O U R C E S

Items Requested for Quotation: Please provide a quotation on your company’s official business letterhead with all items on the quotation listed in the same order as below.

Item Quantity Part or Item Description

1. 1 Moveable Seat Ring 84” 379D572

2. 1 Eat Ring Carrier 84” 379D573

3. 1 Moveable Seat Flange 84” 379D574

4. 1 Stationary Seat Ring 84” 379D600 5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

☒ If checked, please see attached Scope of Work.

State of California Department of Water Resources

Delta Field Division

Page | 1

Harvey O. Banks Pumping Plant Unit 3-7 Discharge Valve Seat Rings

Specification

The contractor shall furnish four seat rings for the Harvey O. Banks Unit 3-7 Discharge Valves.

Each ring shall be fabricated in accordance with the attach specification and drawings. The seat rings shall be made per the drawing with the materials mentioned within this specification. The materials for all seat rings shall be stainless steel and as mentioned below. Due to change of material to stainless steel, the stainless steel overlay will not be required and the new seat rings shall be machined to dimensions that includes the overlay as shown in the drawings.

REFERENCE DRAWINGS:

Title Drawing Number Moveable Seat Ring 379D572 Seat Ring (Movable Seat Flange) 379D574 Seat Ring (Carrier) 379D573 Seat Ring – Plug (Stationary Seat) 379D600

SPECIFICATIONS:

TECHNICAL PROVISIONS - WORKMANSHIP AND MANUFACTURE

ARTICLE 1.01 WORKMANSHIP

The contractor shall be responsible for the accurate manufacture and fabrication of the equipment in accordance with the best modern practice and the requirements of these specifications and drawings. All work shall be performed and completed in a thorough workmanlike manner by fabricators skilled in their various trades.

ARTICLE 1.02 MATERIALS

All materials used in the fabrication of equipment required by this contract shall be new and shall conform to the requirements of the technical provisions and drawings to the applicable requirements of specifications referred to herein. Materials not specifically mentioned in the specifications shall be of the highest commercial quality standard suitable for intended use.

Ring Type Material Carrier ASTM A276 TYPE 316L Movable Seat Flange ASTM A276 TYPE 316L Stationary ASTM A276 TYPE 316L Movable Seat ASTM A564, Type 630, H1150

Page | 2

ARTICLE 1.03 STANDARDS AND CODES:

Ratings, tests, and characteristics of each piece of equipment shall be in accordance with and conform to the applicable requirements, rules and regulations of ANSI; ASTM; Society of Automotive Engineers (SAE); American Iron and Steel Institute (AISI); and Aero Space Material Specification (AMS); American Welding Society (AWS).

ARTICLE 1.04 COORDINATION OF DESIGN

The contractor shall be responsible for a fully coordinated design.

Tolerances unless otherwise specified on the drawings shall use the tolerance block below:

Tolerance Block .X = +/- 0.030”

.XX = +/- 0.010”

.XXX = +/-0.005”

Angle = +- 0.5° Fractional = +/- 0.030” Bolt Circles Diameter = +- 0.005”

ARTICLE 1.05 SUBMITTALS

Contractor shall be responsible to provide any documentation requested regarding material certs, final dimensional report, and other documents pertinent to the fabrication of the seat rings. The dimensional report shall include all as built measurements. Measurements shall be taken by a FARO Arm and measurements should be repeatable. FARO Arm shall be certified calibrated and rated to have the proper reach to take the measurements. The report shall include a FARO Arm model measurement of each of the machined parts. That model shall be saved and used during the dimensional inspection.

ARTICLE 1.06 INSPECTION

The contractor shall notify and coordinate with DWR on the best date for inspection.

Inspection shall be done in the presence of the DWR Engineer. Along with the dimensional report, the contractor shall measure, in the presence of the DWR engineer, all critical dimensions as well as any dimensions (length, radial, TIRs, etc) requested by the DWR engineer.

FARO Arm shall be set up and ready to repeat measurements from report for the DWR engineer to witness and confirm. Measurements shall be within acceptable range of measurements provided from the submittal report.

Page | 3

ARTICLE 1.07 WARRANTY

There shall be a one year warranty for parts and labor. Any issues found with the seat rings shall be covered under the warranty and repaired by the contractor.

ARTICLE 1.08 SHIPPING REQUIREMENTS

Each seat ring shall be shipped using proper packaging to avoid damage during shipment.

Shipping shall be F.O.B. destination, Delta Field Division, 5280 Bruns Road, Byron, CA 94514.

The contractor shall be liable for any damage incurred during shipping. An inspection shall be performed upon delivery to ensure the seats are free of damage.

Kxiong Text Box Material: A564 Type 630 Condition H1150

Kxiong Text Box Movable Seat

Kxiong Text Box Please pay close attention to angle measurements reference planes. Angle tolerance critical

Material: ASTM A276 Type 316L

Kxiong Text Box Movable Seat Flange

Kxiong Text Box Please pay close attention to location of these holes as they are not exactly in the middle

Kxiong Text Box

Material: ASTM A276 Type 316L

Kxiong

Carrier

Material: ASTM A276 Type 316L

Kxiong Text Box Stationary Seat

Kxiong Text Box Please pay close attention to angle measurements reference planes. Angle tolerance critical

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 4 of 16

GENERAL INFORMATION

1. DWR reserves the right to determine the successful quotations(s) either on the basis of individual items or on the basis of all items included in its RFQ, unless otherwise expressly provided in DWR’s RFQ. Unless the Supplier specifies otherwise in its quotation, DWR may accept any item or groups of items of any quotation. DWR reserves the right to modify or cancel, in whole or in part, its RFQ at any time.

2. Award of the Purchase Order (PO) will be made to the Supplier that meets all of the Administrative Requirements stated below and provides the lowest net cost quotation after Small Business (SB) Preferences and/or DVBE incentives are applied.

3. If noted above in the RFQ Key Action Dates, Questions for this RFQ must be emailed to the DWR Contact shown above. No telephone responses are allowed. DWR may seek clarification for any question received.

4. Bidder Instructions (GSPD-451), revised and effective 11/09/11, will be incorporated in the PO by reference: https://www.dgs.ca.gov/-/media/Divisions/PD/PTCS/GSPD/Bidders-Instructions.ashx.

5. Additional Bidder Instructions for Non-IT Commodities (DWR 9678), revised and effective 05/13, will be incorporated in the PO by reference:

https://cadwr.service-now.com/sp_dwr/?id=kb_article_view&sysparm_article=KB0010330

6. The non-IT Goods General Provisions (DGS PD-401 Non-IT Goods) revised and effective 6/21/2022, will be incorporated and made part of the PO by reference:

https://www.dgs.ca.gov/PD/Resources/Page-Content/Procurement-Division-Resources-List- Folder/Required-Language-for-Solicitations-and-Contracts No other terms, conditions, policies, or general provisions from the Supplier are applicable or operative. A quotation that includes a Supplier’s policy, terms, and/or conditions may be rejected.

7. Executive Order N-6-22 – Russia Sanctions On March 4, 2022, Governor Gavin Newsom issued Executive Order N-6-22 (the EO) regarding Economic Sanctions against Russia and Russian entities and individuals. “Economic Sanctions” refers to sanctions imposed by the U.S. government in response to Russia’s actions in Ukraine, as well as any sanctions imposed under state law. By submitting a bid or proposal, Contractor represents that it is not a target of Economic Sanctions. Should the State determine Contractor is a target of Economic Sanctions or is conducting prohibited transactions with sanctioned individuals or entities, that shall be grounds for rejection of the Contractor’s bid/proposal any time prior to contract execution, or, if determined after contract execution, shall be grounds for termination by the State.

https://www.dgs.ca.gov/-/media/Divisions/PD/PTCS/GSPD/Bidders-Instructions.ashx https://cadwr.service-now.com/sp_dwr/?id=kb_article_view&sysparm_article=KB0010330 https://www.dgs.ca.gov/PD/Resources/Page-Content/Procurement-Division-Resources-List-Folder/Required-Language-for-Solicitations-and-Contracts https://www.dgs.ca.gov/PD/Resources/Page-Content/Procurement-Division-Resources-List-Folder/Required-Language-for-Solicitations-and-Contracts

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 5 of 16

GENERAL INFORMATION (Continued)

8. For all prime suppliers that are SB/Disabled Veteran Business Enterprise (DVBE) or are using subcontractors when responding to this RFQ, a Bidder Declaration (GSPD-05-105) must be completed and included with the RFQ response. Suppliers must identify all subcontractors proposed for participation in the contract. Suppliers awarded a PO as a result of a RFQ are contractually obligated to use the subcontractors for the corresponding work identified unless DWR agrees to a substitution and it is incorporated by amendment to the PO. The GSPD-05-105 form link is under Administrative Requirements.

9. California-certified small business suppliers will be given a five percent (5%) preference for bid evaluation purposes only.

In addition, a five percent (5%) bid preference is available to a non-small business claiming 25 percent (25%) California-certified small business subcontractor participation. Suppliers claiming this preference must be certified by California as a small business or must commit to subcontract at least 25 percent (25%) of the net bid price with one or more California-certified small businesses.

Small Business Nonprofit Veteran Services Agencies (SB/NVSA) prime Suppliers meeting requirements specified in the Military and Veterans Code § 999.50, et seq. and obtaining a California certification as a small business are eligible for the five percent (5%) small business preference.

10. California-certified DVBE suppliers and/or suppliers who provide DVBE participation will be given an incentive, in accordance with Military and Veterans Code § 999.5(a). For evaluation purposes only, DWR shall apply an incentive to the quotations that propose California certified DVBE participation as identified on the GSPD-05-105 and confirmed by DWR. The incentive amount for the lowest net cost quotation will vary in conjunction with the percentage of DVBE participation. The following table identifies the percentages that will be used to adjust the net quotation price when calculating the DVBE Incentive:

Confirmed DVBE Participation: DVBE Incentive:

5 percent and Over 5 percent

4 percent – 4.99 percent inclusive 4 percent

3 percent – 3.99 percent inclusive 3 percent

Suppliers responding to this RFQ who have been certified by California as a Disabled Veteran Business Enterprise (DVBE) (or who are offering rental equipment and have obtained the participation of subcontractors certified by California as a DVBE) must also submit a completed form(s) Disabled Veteran Business Enterprise Declaration (STD. 843). The STD. 843 link is in Administrative Requirements section.

All disabled veteran owners and disabled veteran managers of the DVBE(s) must sign the form(s).

The completed STD. 843 should be included with the response to a RFQ. At DWR’s option prior to award, contractors responding to a RFQ may be required to submit additional written clarifying https://leginfo.legislature.ca.gov/faces/codes_displayText.xhtml?lawCode=MVC&division=4.&title=&part=&chapter=6.&article=7.

https://leginfo.legislature.ca.gov/faces/codes_displayText.xhtml?lawCode=MVC&division=4.&title=&part=&chapter=6.&article=7.

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 6 of 16 information. Failure to submit the requested written information as specified may be grounds for quotation rejection.

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 7 of 16

GENERAL INFORMATION (Continued)

11. In accordance with GC section 14837 and M&VC section 999, all SB and DVBE contractors, subcontractors and suppliers that bid on or participate in a State contract, must perform a Commercially Useful Function (CUF).

12. It is unlawful for any person engaged in business within California to sell or use any article or product as a “loss leader” as defined in section 17030 of the Business and Professions Code.

13. Software license and maintenance fees are considered subscriptions. Any PO awarded for software support and maintenance for 12 months or longer will be paid for the first year only and must be invoiced on an annual basis for the remaining subscription period.

14. GENERATIVE ARTIFICIAL INTELLIGENCE (GEN AI) DISCLOSURE

a. The State of California seeks to realize the potential benefits of GenAI, through the development and deployment of GenAI tools, while balancing the risks of these new technologies.

b. Bidders/Offerors must notify the State in writing if their solution or service includes, or makes available, any GenAI technology, including GenAI from third parties or subcontractors.

c. The State has developed a GenAI Disclosure & Factsheet to be completed by the

Bidder/Offeror.

d. Failure to disclose GenAI to the State and submit the GenAI Disclosure & Factsheet will result in disqualification of the Bidder/Offeror and may void any resulting contract. The State reserves its right to seek any and all relief it may be entitled to as a result of such non-disclosure. Upon receipt of a Bidder/Offeror GenAI Disclosure & Factsheet, the state reserves the right to incorporate GenAI Special Provisions into the final contract or reject bids/offers that present an unacceptable level of risk to the state.

15. Award of the PO, if made, will be in accordance with the RFQ information on award to a responsible Supplier whose bid complies with all the requirements of the RFQ documents and addenda thereto, except for such immaterial defects as may be waived by DWR. Award, if made, will be made within 45 days after the scheduled date for PO Award as specified in the RFQ; however, a Supplier may extend the offer beyond 45 days in the event of a delay of award. DWR reserves the right to determine the successful Supplier(s) quotation either on the basis of individual items or on the basis of all items included in its RFQ, unless otherwise expressly provided in the DWR’s RFQ. Unless the Supplier specifies otherwise in its quotation, DWR may accept any item or group of items of any bid. DWR reserves the right to modify or cancel in whole or in part it’s RFQ.

http://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?lawCode=BPC&sectionNum=17030.

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 8 of 16

ADMINISTRATIVE REQUIREMENTS

This RFQ and Supplier’s response will be made a part of the DWR’s procurement file. Any changes to this RFQ, including the Statement of Work (if applicable), shall be cause for rejection. All administrative requirements are Pass/Fail.

Required Forms

1. Completed DWR RFQ Cover Sheet (Attachment 1)

2. Quotation submitted on supplier’s official business letterhead and contain the following:

• Reference to the RFQ Number

• Manufacture or Vendor Part Number

• Quantity

• Description

• Unit Price

• Extended Price

• Software License/Maintenance Term Dates, if applicable

• UNSPSC Number, if available

3. Copy of California Seller’s Permit (If purchasing tangible property)

4. Bidder Declaration, GSPD-05-105 (Attachment 2) http://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/gspd05-105.pdf

5. Recycled Content Certification, CalRecycle form 74 (Attachment 3) https://www2.calrecycle.ca.gov/Docs/Web/111480

6. Generative Artificial Intelligence (GenAI) Disclosure & Factsheet (Attachment 4)

STD 1000 Generative Artificial Intelligence (GenAI) Disclosure & Factsheet (ca.gov)

If Applicable Forms

7. DVBE Declarations, DGS PD 843 (Required when claiming DVBE Incentive) http://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/pd_843.pdf

8. Payee Data Record, STD. 204 (Required if doing business with DWR the first time) http://www.documents.dgs.ca.gov/dgs/fmc/pdf/std204.pdf

9. Drug Free Workplace Certification, STD. 021 (Required if doing business with DWR the first time) https://www.documents.dgs.ca.gov/dgs/fmc/pdf/std021.pdf http://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/gspd05-105.pdf https://www2.calrecycle.ca.gov/Docs/Web/111480 https://www.documents.dgs.ca.gov/dgs/fmc/pdf/std1000.pdf http://www.documents.dgs.ca.gov/dgs/fmc/gs/pd/pd_843.pdf http://www.documents.dgs.ca.gov/dgs/fmc/pdf/std204.pdf https://www.documents.dgs.ca.gov/dgs/fmc/pdf/std021.pdf

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 9 of 16

DWR RFQ Cover Sheet Attachment 1 The submission of this quotation does not obligate DWR to fund the proposed PO. If the quotation is approved for funding, a PO will be executed between DWR and the Supplier. When funding is authorized, the Supplier will be expected to adhere to the terms of the executed PO.

The undersigned Supplier hereby proposes to furnish all labor, materials, tools, and equipment to provide goods and services in accordance with the specifications and provisions received with the

RFQ.

1. Supplier’s Quote Submission Date:

2. Supplier’s Quote Reference Number:

3. Supplier’s Company Name:

4. Supplier’s Mailing Address:

Street City State Zip Code

5. Supplier’s Contact Person:

6. Telephone:

7. Email:

8. Federal Taxpayer Identification Number:

9. California Seller’s Permit Number:

10. Supplier’s SB/DVBE Certification Number, If applicable:

Check one or both boxes when applicable: ☐ Small Business ☐ DVBE

11. All documents have been provided per the Administrative Requirement page of this RFQ:

☐ Yes ☐ No

12. Principal who is authorized to bind the Supplier:

Typed Name Title

Original Signature Date

Specification Attachment 2

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 10 of 16

Specification Attachment 2

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 11 of 16

Specification Attachment 3

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 12 of 16

Specification Attachment 3

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 13 of 16

Specification Attachment 4

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 14 of 16

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 15 of 16

SB/DVBE Option RFQ ($10,000.01 to $249,999.99) Page 16 of 16