RFQ 01A 250722-0025.pdf

State of Maine RFQ# RFQ 01A 250722-0025 Rev. 1/28/2025

STATE OF MAINE

DEPARTMENT OF ADMINISTRATIVE AND FINANCIAL SERVICES

OFFICE OF STATE PROCUREMENT SERVICES

RFQ # 01A 250722-0025

Master Agreement for Veterinary Supplies

Quotations/Responses Due: August 13, 2025 not later than 4:00 p.m. local time

Note: All questions and responses must be provided via the State of Maine’s e-Procurement system: AdvantageME / Vendor Self Service (VSS). Questions can be submitted up to 48 hours prior to closure date and time. Not all questions will be answered.

General Instructions on Bidder Questions

It is the responsibility of each Bidder to examine the entire RFQ and to seek clarification by submitting questions through the Q & A List tab on the Solicitation page in the CGI Vendor Self Service (VSS). Any answers to questions will appear there as well. It is the vendor's responsibility to log in to view all questions and answers posted. Additional information obtained any other way will not be valid.

In the event that you must contact us for any other reasons than the Q & A previously mentioned, only the Buyer listed on the Solicitation page may be contacted from the time this RFQ is issued until award notification is made. No other person/State employee is empowered to make binding statements regarding this RFQ. Violation of this provision may lead to disqualification from the bidding process, at the State’s discretion.

Summary

For this competitive Request for Quotations (RFQ) process, the State of Maine Office of State Procurement Services (“OSPS”) is acting on behalf of the Department of Agriculture, Conservation & Forestry (“Requesting Department”). OSPS and the Requesting Department seek quotations (also referred to as “bids” or “responses” herein) to provide the goods/services listed above. This document provides instructions and descriptions of requirements for this competitive process.

RFQ REQUIREMENTS

1. Required Documents

All bids MUST include the following documentation, or the bid will be deemed incomplete and will not be evaluated.

• RFQ 01A 250722-0025 Cost Response Sheet. Must be attached as an EXCEL worksheet. Submissions in any other format may be rejected.

• Bid Specification Documentation: A quote, PDF literature from the manufacturer, and/or other forms of documentation to verify the item(s) being bid meet or exceeds ALL posted specifications covered in Appendix B, pages 11-17.

2. Other Bid Documents

In addition to the required documents, cost, delivery, and other information required in VSS, all bids should contain the following information. All documents listed below, if not attached to the bid, MUST be received within fifteen (15) days of notification of intent to award or the contract will not be executed.

• Appendix A: Bid Cover Page and Responsible Bidder Form

• Appendix D: Municipality, Political Subdivision Participation Certification

• Appendix E: Master Agreement Vendor Contact and Signor Information

3. Contract Term

In addition to any mutually agreed upon delivery dates for purchases of goods, the contract resulting from this RFQ will have a term, or “Period of Performance”, during which the contract is considered to be in effect. The anticipated contract term is defined in the table below. Please note that the dates below are estimated and may be adjusted as necessary in order to comply with all procedural requirements associated with this RFQ and the contracting process. The actual contract start and end dates will be established by the completed and approved contract.

Contract Renewal: Following the initial term of the contract, OSPS, at their discretion, may opt to renew the contract for four (4) extension periods as defined below.

The term of the anticipated contract, resulting from this RFQ, is defined as follows:

Period Start Date End Date Initial Period of Performance Immediately 8/31/2026 Optional Extension Period #1 9/1/2026 8/31/2027 Optional Extension Period #2 9/1/2027 8/31/2028 Optional Extension Period #3 9/1/2028 8/31/2029 Optional Extension Period #3 9/1/2029 8/31/2030

4. Submitting a Quotation

a. Quotations Due: Quotations must be received no later than 4:00 p.m. Eastern Standard Time (EST), on the date listed in VSS. Quotations received after the 4:00 p.m. deadline will not be accepted.

b. Submission Instructions: Bidders must submit their bids in the State of Maine’s electronic procurement system: Advantage “Vendor Self Service” (VSS). More information on this system can be found at the following internet link:

https://www.maine.gov/dafs/bbm/procurementservices/vendors/vendor-self-service-system

c. Multiple Quotations: Unless specifically prohibited in Section 1 of this RFQ, Bidders are permitted to submit multiple quotations for this RFQ, offering alternative items or pricing for the State of Maine to consider in its best value determination.

d. Withdrawal of a Quotation: Bidders are permitted to withdraw their own quotations up until the due date and time for receipt of quotations. To do so, a Bidder must enter the VSS system (as referenced above), identify and open their submitted quotation located in the Solicitation Responses tab, and click the “Withdraw” button found at the bottom of the screen. Quotations cannot be withdrawn after the due date and time for receipt of quotations.

e. Attachments: Any attachments provided with the Advantage VSS bid submission must be in MS Word, MS Excel, or Adobe (.pdf) format, unless otherwise specified in Section 1 of this RFQ. Vendors are encouraged to submit supporting documentation that aid the requesting department in understanding how the bid conforms to the requirements. The VSS attachment file size limit is 15Mb. Please contact the buyer for this RFQ if you must submit attachment files larger than this.

f. Vendor specifications: Unless otherwise stated in this RFQ document, limited specification information will be required upon submission of a bid in response to this RFQ. However, a Bidder’s response should include an affirmative statement that their bid complies with all requirements of this RFQ, unless the Bidder specifically addresses how its bid differs from the specifications, and why the differences should be deemed acceptable by the State.

5. General Instructions

a. The Bidder must submit a cost quotation response that covers the goods and term of the contract, including any optional renewal.

b. The cost quotation shall include the costs necessary for the Bidder to fully comply with the contract terms and conditions and RFQ requirements.

c. Failure to provide the requested information may result in the exclusion of the quotation from consideration, at the discretion of OSPS.

d. No costs related to the preparation of the quotation for this RFQ or to the negotiation of the contract with the Department may be included in the quotation.

e. The State is exempt from the payment of Federal, State and local Taxes on articles not for resale. Please provide quotations that do not include these taxes. Upon application, an exemption certificate can be furnished by the State at the point of contract finalization.

6. Quotation Evaluation and Selection https://www.maine.gov/dafs/bbm/procurementservices/vendors/vendor-self-service-system https://www.maine.gov/dafs/bbm/procurementservices/vendors/vendor-self-service-system

Evaluation of the submitted quotations shall be accomplished as detailed below:

a. State of Maine RFQ documents are evaluated on a Best Value basis. The term “Best Value” may take into consideration the qualities of the goods or services to be supplied, their conformity with the specifications listed in the RFQ, the purposes for which they are required, the date of delivery, and the best interest of the State.

Once the goods or services have been determined to conform to the specifications then OSPS will make its award decision based on the lowest price among the Bidders. Delivery days can be a factor in awarding.

b. The State reserves the right to not make an award to the lowest price bidder when that bidder has had documented poor performance, and/or a contract terminated or not renewed within the last five years.

c. At the discretion of OSPS, if a Bidder’s submission is deemed to not conform to the specifications listed in the RFQ, or otherwise not conform to the requirements of the RFQ, then that Bidder’s submission may not be considered for contract award.

d. In the event that no Bidder submission conforms to the specifications of this RFQ, then OSPS may choose not to make any award. Alternatively, OSPS may make an award to the Best Value Bidder whose specifications most closely meet the specifications of this RFQ. For example, if there are five specification requirements, and two responses are received with one Bidder meeting four requirements, and one bidder meeting three requirements, then OSPS, at its discretion, may make a contract award to the Bidder meeting four requirements.

e. If the specifications provided with this RFQ are of a technical nature, then OSPS’s RFQ Coordinator, at his or her discretion, may seek to use an evaluation team comprised of subject matter experts, end-users from the Requesting Department, or other State Department representatives. In such a case, the evaluation team will judge the merits of the quotations received in accordance with the best value criteria defined in the RFQ.

7. Negotiations

a. No Best and Final Offers: The State of Maine will not seek a best and final offer (BAFO) from any Bidder in this procurement process. All Bidders are expected to provide their Best Value pricing with the submission of their quotation.

b. OSPS reserves the right to negotiate with the successful Bidder to finalize a contract at the same rate or cost of goods and services as presented in the selected quotation. Such negotiations may not significantly vary the content, nature or requirements of the quotation or the RFQ to an extent that may affect the price of goods or services requested. OSPS reserves the right to terminate contract negotiations with a selected Bidder who submits a proposed contract significantly different from the quotation submitted in response to the RFQ.

c. In the event that an acceptable contract cannot be negotiated with the highest ranked Bidder, OSPS may withdraw its award and negotiate with the next-highest ranked Bidder, and so on, until an acceptable contract has been finalized.

Alternatively, OSPS may cancel the RFQ, at its sole discretion.

TERMS AND CONDITIONS FOR RFQ AND CONTRACT

PART I GENERAL INFORMATION ON RFQs

A. Purpose and Background

The State of Maine (“State”) Department of Administrative and Financial Services (“Department”), Office of State Procurement Services (“OSPS”) acts as the purchasing agent on behalf of all Executive Departments and other agencies within State Government. For this competitive Request for Quotations (RFQ) process, OSPS is acting on behalf of the Requesting Department listed on the cover page. OSPS and the Requesting Department seek quotations (also referred to as “bids” or “responses” herein) to provide the goods/services as defined above in Section 1 of this document. This document provides instructions for submitting quotations, the procedure and criteria by which the Bidder(s) will be selected, and the contractual terms which will govern the relationship between the State and the awarded Bidder(s). Following Bidder selection and upon reaching a mutual agreement, the State and the selected Bidder will enter into a contract – taking the form of a State of Maine Master Agreement or Buyer Purchase Order (all generally referred to as “contract” herein), as applicable.

B. General Provisions

1. Issuance of this RFQ does not commit OSPS or the Requesting Department to issue an award or to pay expenses incurred by a Bidder in the preparation of a response to this RFQ. This includes attendance at personal interviews or other meetings and software or system demonstrations, where applicable.

2. All responses to this RFQ should adhere to the instructions and format requirements outlined in this RFQ and all written supplements and amendments (such as OSPS’s answers to the Bidders’ questions submitted through the VSS), as issued by OSPS.

Responses are to follow the format and respond to all questions and instructions specified above in the “Submitting a Quotation” section of this RFQ.

3. Bidders shall take careful note that in evaluating a quotation submitted in response to this RFQ, the Department may consider materials provided in the quotation, information obtained through interviews/presentations (if any), and internal information of previous contract history between OSPS and the Bidder (if any). OSPS also reserves the right to consider other reliable references and publicly available information available in evaluating a Bidder’s experience and capabilities, if needed. All responses to this RFQ shall be considered to be authorized to legally bind the Bidder, and if selected for award, shall contain or be considered to contain a statement that the quotation and the pricing contained therein will remain valid and binding for a period of at least 180 days from the date and time of the bid opening.

4. The RFQ and the selected Bidder’s quotation, including all appendices or attachments, may be incorporated in the final contract.

5. Following announcement of an award decision, all submissions in response to this RFQ will be considered public records available for public inspection pursuant to the State of Maine Freedom of Access Act (FOAA) (1 M.R.S. §§ 401 et seq.).

http://www.mainelegislature.org/legis/statutes/1/title1sec401.html http://www.mainelegislature.org/legis/statutes/1/title1sec401.html

6. OSPS, at its sole discretion, reserves the right to recognize and waive minor informalities and irregularities found in quotations received in response to this RFQ.

7. OSPS reserves the right to authorize other State Departments to use the contract(s) resulting from this RFQ, if it is deemed to be beneficial for the State to do so.

8. All applicable laws, whether or not herein contained, shall be included by this reference.

It shall be Bidder’s responsibility to determine the applicability and requirements of any such laws and to abide by them.

C. Eligibility to Submit Bids

Public agencies, private for-profit companies, and non-profit companies and institutions are invited to submit bids in response to State of Maine Requests for Quotations.

D. Delivery Terms

For the purchase of goods, OSPS and selected Bidder will decide upon a delivery date in accordance with the State’s requirements and the terms offered in the Bidder’s quotation.

Unless stated otherwise in Section 1 of this RFQ, all deliveries are expected with shipping terms of “Free on Board (FOB) – Destination”. The State intends for this to mean that all goods shall be priced in the bid response to include shipping charges, if any, to the State’s desired location. The “FOB – Destination” shipping term is also intended to mean that the State shall not bear any responsibility for the goods in question until the State takes possession of them at the destination point of delivery.

E. Alternate Bids and Approved Equals

When, in bid forms and specifications, an article or material is identified by using a trade name and catalog number of a manufacturer or vendor, the term “or approved equal,” if not inserted with the identification, is implied. Any Bidder that seeks to propose an alternate item from what is specified in this RFQ should refer to State of Maine Statute 5 MRSA §1825-B, for “Bids, awards and contracts”, found here:

http://www.mainelegislature.org/legis/statutes/5/title5sec1825-B.html

F. Appeal of Contract Awards

Any person aggrieved by the award decision that results from this RFQ may appeal the decision to the Director of the Bureau of General Services in the manner prescribed in 5 MRSA § 1825-E and 18-554 Code of Maine Rules, Chapter 120 (found here: Chapter 120). The appeal must be in writing and filed with the Director of the Bureau of General Services, 9 State House Station, Augusta, Maine, 04333-0009 within 15 calendar days of receipt of notification of contract award.

If this RFQ results in the creation of a pre-qualified or pre-approved list of vendors, then the appeal procedures mentioned above are available upon the original determination of that vendor list, but not during subsequent competitive procedures involving only the pre-qualified or pre-approved list participants.

http://www.mainelegislature.org/legis/statutes/5/title5sec1825-B.html https://www.maine.gov/dafs/bbm/procurementservices/policies-procedures/chapter-120 https://www.maine.gov/dafs/bbm/procurementservices/policies-procedures/chapter-120

PART II CONTRACT ADMINISTRATION AND CONDITIONS

A. Contract Document

The successful Bidder will be required to execute a contract in the form of a State of Maine Buyer Purchase Order, Contract Agreement to Purchase Services or State of Maine Master Agreement.

The Terms and Conditions used with the aforementioned contract types may be found on the Office of State Procurement Services’ website at the following links:

BPO and MA Terms and Conditions

In the event that the State of Maine’s Standard Terms and Conditions or RFQ provisions do not otherwise cover contractual scenarios that are specific to the goods or services being purchased under this RFQ, then the State is willing to consider a Bidder’s standard terms and conditions. Consideration or use of a Bidder’s standard terms and conditions shall only occur under the general agreement that in the event of a conflict, the State of Maine’s Standard Terms and Conditions and RFQ provisions shall take precedence.

Other forms and contract documents commonly used by the State can be found on the Office of State Procurement Services’ website at the following link:

https://www.maine.gov/dafs/bbm/procurementservices/forms

B. Independent Capacity

In providing services and performing under the contract, the successful Bidder shall act independently and not as an agent of the State of Maine.

C. Payments and Other Provisions

The State anticipates paying the selected Bidder for goods and services received, on the basis of net 30 payment terms, upon the receipt of an accurate and acceptable invoice. An invoice will be considered accurate and acceptable if it contains a reference to the State of Maine contract number, contains correct pricing information relative to the contract, and provides any required supporting documents, as applicable, and any other specific and agreed-upon requirements listed within the contract that results from this RFQ.

The State of Maine reserves the right to pay for goods purchased through this solicitation by any of several available means, which include but may not be limited to check, EFT, and/or procurement card. Bidders are advised that state statute precludes sellers from imposing a surcharge on credit or debit card purchases (text follows):

“9-A MRSA §8-509 (1): A seller in a sales transaction may not impose a surcharge on a cardholder who elects to use a credit card or debit card in lieu of payment by cash, check or similar means.”

Appendix A

STATE OF MAINE

BID COVER PAGE

Bidder’s Organization Name:

Chief Executive - Name/Title:

Tel: Cell: E-mail:

Headquarters Street Address:

Headquarters City/State/Zip:

(provide information requested below if different from above) Lead Point of Contact for Bid - Name/Title:

Tel: Cell: E-mail:

Street Address:

City/State/Zip:

By signing below Bidder affirms:

• Their bid complies with all requirements of this RFQ;

• This bid and the pricing structure contained herein will remain firm for a period of 180 days from the date and time of the bid opening;

• That no personnel currently employed by the Department or any other State agency participated, either directly or indirectly, in any activities relating to the preparation of the Bidder’s proposal;

• That no attempt has been made or will be made by the Bidder to induce any other person or firm to submit or not to submit a proposal; and

• The undersigned is authorized to enter into contractual obligations on behalf of the above-named organization.

Name: Title:

Authorized Signature: Date:

Responsible Bidder Form

By signing this document, I certify to the best of my knowledge and belief that the aforementioned organization, its principals, and any subcontractors named in this proposal:

a. Are not presently debarred, suspended, proposed for debarment, and declared ineligible or voluntarily excluded from bidding or working on contracts issued by any governmental agency.

b. Have not within three years of submitting the proposal for this contract been convicted of or had a civil judgment rendered against them for:

i. fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a federal, state or local government transaction or contract.

ii. violating Federal or State antitrust statutes or committing embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, or receiving stolen property;

iii. are not presently indicted for or otherwise criminally or civilly charged by a governmental entity (Federal, State or Local) with commission of any of the offenses enumerated in paragraph (b) of this certification; and

iv. have not within a three (3) year period preceding this proposal had one or more federal, state or local government transactions terminated for cause or default.

c. Have not entered into a prior understanding, agreement, or connection with any corporation, firm, or person submitting a response for the same materials, supplies, equipment, or services and this proposal is in all respects fair and without collusion or fraud. The above-mentioned entities understand and agree that collusive bidding is a violation of state and federal law and can result in fines, prison sentences, and civil damage awards.

• Failure to provide this certification may result in the disqualification of the

Bidder’s proposal, at the discretion of the Department.

To the best of my knowledge all information provided in the enclosed proposal, both programmatic and financial, is complete and accurate at the time of submission.

Name: Title:

Authorized Signature: Date:

Appendix B

DETAILED SPECIFICATIONS

Equivalent Bid Items: Equivalent items may be bid; however, all equivalent item bids MUST include documentation to prove equivalency. The final decision on equivalency will be determined by the requesting Department.

Master Agreement: The results of this bid process will be the creation of a Master Agreement Contract (MA) that will allow all State of Maine Departments and Agencies to purchase the listed items as needed. The State reserves the right to add other similar items or commodities to the MA if it’s in the State’s best interest but does not obligate the State to purchase similar noncontracted items or commodities from the selected bidder.

Prices: Bid Price must be with shipping terms of “Free on Board (FOB) – Destination”. The State intends for this to mean that all goods shall be priced in the bid response to include shipping charges, if any, to the State’s desired location. The “FOB – Destination” shipping term is also intended to mean that the State shall not bear any responsibility for the goods in question until the State takes possession of them at the destination point of delivery.

Price and Rate Guarantee Period: All quoted prices and rates must be guaranteed for and must remain firm for minimally one year of the initial contract period. The State of Maine can request a price reduction at any time after the first twelve-month period of the contract period.

Price adjustment requests must be made by the vendor(s) at least sixty (60) days prior to the effective date. Requests for price increases must include sufficient documentation from the manufacture documenting the request is based on the vendor’s actual cost increases. Any approved price or rate adjustments must be held firm for minimally one year or the remainder of the contract period if there is less than one year remaining. The price adjustment will not go into effect until the contract amendment has been fully approved by the State of Maine.

Quantity: The expected purchase quantity in the first year is unknown; however, an anticipated annual order quantity has been included on the cost response sheet. There is no guaranteed award associated with this bid opportunity. All purchases will depend on the bid results and departmental budget. The State of Maine reserves the right to negotiate the purchase of additional units at the bid price for six months after the award is officially made.

Delivery Locations: The vendor must deliver to the Department of Agriculture, Conservation, and Forestry. The primary user will be the Office of Animal and Plant Health. Most agency orders will be delivered to Augusta. The exact addresses will be provided to the selected vendor.

Award: The State anticipates making one award as a result of this RFQ process. The State reserves the right not to make an award. An award will be given to the bidder providing the lowest calculated bid amount for all items listed. Items without an Anticipated Annual Qty assigned will be calculated as one unit for bid evaluation purposes. Pricing entered for each line item must be based on the unit of measurement given in column “D” of the Cost Response Sheet.

Prices: Bid Price must be with shipping terms of “Free on Board (FOB) – Destination”. The State intends for this to mean that all goods shall be priced in the bid response to include shipping charges, if any, to the State’s desired location. The “FOB – Destination” shipping term is also intended to mean that the State shall not bear any responsibility for the goods in question until the State takes possession of them at the destination point of delivery.

Delivery and Inspection: The requested items will be inspected after delivery. If shipment is deemed unacceptable the delivery will be refused and will be returned at the risk and expense of the selling vendor.

Delivery Date: These items are needed immediately, delivery date After Receipt of Order (ARO) may be factored into the bid award decision.

Specifications

Item Unit of Measure

Pentobarbital sodium and phenytoin sodium Euthanasia solution 100mL vial

Ketamine HCL 100mg/mL 10mL vial

Tileamine & Zolazepram 100mg/mL 5mL vial Xylazine 100mg/mL 100mL vial 100mL vial

Flunixin Megluimine 50mg/mL injectable vial 100mL vial Lidocaine Prilocaine 2.5% Cream 30g/tube or tub Lidocaine HCL Injection 2% 250mL vial Salix injectable 5% 50mL vial Blood Collection Needle Holder for vacutainer needles - Single use 250/bag

Vacutainer safety-Lok winged blood collection set with Luer adaptor: 23g x 3/4", 12" tubing. Single use 50 count/box

Vacutainer Needle 21gx1.25" single use 48 count/box

Vacutainer- Red & grey stopper, 8.5mL single use 100 tube/box

Vacutainer Red no additive 10mL single use 100 tube/box

Vacutainer Green 143USP sodium heparin 10mL 100 tube/box

Vacutainer Lavendar 10.8mg K2EDTA 10mL 100 tube/box

1.5" x 19g Poly Hub Sterile Needle 100 count/box

12cc Luer Lock Syringe - sterile soft pack single use 100 count/box

5-6cc Luer Lock sterile syringe 100 count/box

20g x 1" sterile needle with poly hub 100 count/box Tuberculin Syringe, 1mL with detachable luer slip needle, 25gx5/8" 100 count/box

Sterile skin biopsy punch 6mm 1 per package

Sharps container, Rotor Lid 2 gallon 1 each

Phlebotomy Sharps Container, 1 quart 1 each

Disposable Scalpel, stainless steel sterile #10 blade 10 count/box

Formalin Filled Jars 60mL 10 jars/box

Elastic Top Disposable Boot Covers, Clear, 3mil. Height 19.5, 15.5" heel-to-toe, fits shoe size up to 13 50/box

Elastic Top Disposable Boot Covers, Clear, 3mil, Extra Large.

Height 19.5, 20" heel-to-toe, fits shoe size 13 and over 50/box

Tyvek or equivalent microporous breathable coveralls. Material must pass ASTM 1670 test method. Size L 25/box

Tyvek or equivalent microporous breathable coveralls. Material must pass ASTM 1670 test method. Size XL 25/box

Tyvek or equivalent microporous breathable coveralls. Material must pass ASTM 1670 test method. Size X XL 25/box

Tyvek or equivalent microporous breathable coveralls. Material must pass ASTM 1670 test method. Size XX XL 25/box Cut Proof Glove M 1 each

Cat & Wildlife Protection Gloves, Not Bite Proof, Small 1 pair/package

Cat & Wildlife Protection Gloves, Not Bite Proof, Medium 1 pair/package

Cat & Wildlife Protection Gloves, Not Bite Proof, Large 1 pair/package Long sleeve Coveralls- Washable, Cotton/poly blend. Navy or dark green 1 Each

Total OB sleeve, Super Touch Protector. 36" long. 1mil thick, size regular 50/box

Work Rubber Overshoe, 10" high, black, waterproof. Medium. Slip and cold-weather resistant 1 pair/package

Work Rubber Overshoe, 10" high, black, waterproof, large. Slip and cold-weather resistant 1 pair/package

Work Rubber Overshoe, 10" high, black, waterproof, X-large. Slip and cold-weather resistant 1 pair/package

Work Rubber Overshoe, 10" high, black, waterproof. X-large. Slip and cold weather resistant 1 pair/package

Work Rubber Overshoe, 10" high, black, waterproof. XX-large. Slip and cold-weather resistant 1 pair/package

Work Rubber Overshoe, 10" high, black, waterproof. XXX-large.

Slip and cold-weather resistant 1 pair/package

Tick Gaiters 1/pack 15 gallon Rubber Tub (Feed Pans), black 1 each

Virkon S Disinfectant Powder. Active Ingredients: potassium peroxymonosulfate 21.41%, sodium chloride 1.5% 10lb tub BenzaRid disinfectant-firucide-fungicide-cleaner. 32oz spray bottle 1/package

Rx Destroyer All-Purpose Drug Disposal System Mail Back service kit for 1 gallon bottles. 1 per package Heavy-duty swinemouth speculum, 10 3/4" 1 each

Necropsy knife, narrow blade, 7" molybdenum hardened stainless steel. No slip grip handle. 1 each

Necropsy knife, curved blade, 6" molybdenum hardened stainless steel. No slip grip handle. 1 each

Aluminum equine mouth speculum with halter strap 1 each

Back Tag Glue, 4.5 oz. Specialized, designed for use on animals. 1 tube each

Universal Total Tagger. Animal ID applicator to apply Allflex 2 piece global tags 1 each

Halter. Quick-release 1/2" polyrope. Adjustable 1 each White ID Band Maker, 20" 500/box ISO Microchip, standard 25/box 10' 5/8" Lead rope with bull snap 1 each Lubricant for syringe pole 1 each Welbourn Cat Catcher 1 each

SprayOn Animal Marker, 500mL, assorted colors. Inverted spray capability. 500 uses per can. Weather tolerant 1 each

All Weather Twist Stick marking paint , orange 12 sticks/box Syringe Pole, Safe-T Flex. 42" 10cc 1 each Shorty Hog Holder, galvanized aircraft cable loop. 8" total length.

4 inch handle. 1 each Canine Spay Pack, Von Klaus German Surgical Steel, 18 piece.

Autoclavable 1 each

Global Pocket Reader Plus (GPR+). Reads and stores up to 3000 unique identifiers. Compatible with Equi-trace database/app. Will display temperatures when used with bio-thermal microchips 1 each

Captive Bolt Stunner Gun. 1 1/8" extended bolt length, totalling 3.35". Automatic return loading action. Machinery directive 2006/42/CE/EC/CIP approved cartridges and ISO 9001 quality standards. 6.5 lbs. 0.22 caliber 1 each

Blitz Kerner or Accles & Shelvoke captive bolt standard stunner gun, 0.22 caliber 1 each

Bio-thermal Temperature Sensing Microchips for Horses. ISO compliant, 15-digit unique identifier, 12g needle inside sterile pouch. 10 chips/box

Blitz Kerner or equivalent- Captive bolt gun cleaning oil 8 oz bottle

Blitz-Kerner or equivalent. Captive bolt cartridge. Red Heavy Duty for large boars and bulls over 1000 lbs 50/box

Blitz-Kerner or equivalent. Captive bolt cartridge. Blue standard for animals 350-1200 lbs 50/box

Blitz-Kerner or equivalent. Captive bolt cartridge. Yellow, medium duty for animals less than 350 lbs 50/box

Blitz-Kerner or equivalent. Captive bolt cartridge. Green, low duty.

Up to 100 lbs. 50/box

Digital thermometer with flexi-temp, 10 second read time, auto shut off, C/F dual scale, waterproof, high acuracy 1 each

Dual-head stethoscope, 22" tubing, adjustable binaurals, latex free. Cold and weather resistant tubing. 1 each

Dual-head stethoscope, 28- 30" tubing, adjustable binaurals, latex free. Cold and weather resistant tubing. 1 each Ethanol 140 Proof (70%) Denatured Alcohol 1 gallon Ethyl Acetate Lab Grade 1 gallon

Petri Dish: 100 mm Dia, 1 Wells, Polystyrene, 15 mL, 100 x 15 mm, Sterile, Petri Dish 100/pack

Entomology Forceps Set 6/pack

Appendix C

COST RESPONSE

All responses to this RFQ will require a cost quotation response, in a format selected by the State of Maine. That format is described below.

RFQ # 01A 250722-0025 Cost Response Sheet must be attached as an EXCEL worksheet.

Submissions in any other format may be rejected. This is the official bid document. Bid prices cannot be altered after bid closure.

The below highlighted fields of the Cost Response sheet will need to be complete in order to evaluate your bid:

• List Price: This is your bid price. Please enter a bid price for each item listed.

• Delivery Days: This is the number of calendar days it takes for the order to be delivered

After Receipt of Order

• Manufacturer Name

• Manufacturer Part Number

Appendix D

MUNICIPALITY POLITICAL SUBDIVISION and SCHOOL DISTRICT PARTICIPATION

CERTIFICATION

The Office of State Procurement Services is committed to providing purchasing opportunities for municipalities, political subdivisions and school districts in Maine by allowing them access, through our vendors, to our contract pricing. A bidder's willingness to extend contract pricing to these entities will be taken into consideration in making awards.

Orders from Municipality, Political Subdivisions and School Districts (Appendix D): If the bidder elects to permit Municipality, Political Subdivisions and School Districts to utilize the resulting Master Agreement Contract, The State of Maine will not be responsible for any order placed by these groups. All orders will originate from these groups and they will be liable for all payments.

Will you accept orders from political subdivisions and school districts in Maine at the prices quoted?

_____ Yes

_____ Yes, with conditions as follows:

______ No

Name of Company: __________________________________________________________

Address: ___________________________________________________________________

Signature: __________________________________________________________________

Printed Name: ______________________________________________________________

Date: ___________________________

Appendix E

MASTER AGREEMENT CONTRACT DOCUMENT VENDOR CONTACT INFORMATION

and MASTER AGREEMENT CONTACT DOCUMENT VENDOR SIGNER INFORMATION

This bid process will result in the creation of a Master Agreement Contract (MA) which will permit users to order contracted items as needed.

Ordering Procedures: Delivery Orders (DO) will be created in AdvantageME for all orders over $10000.00. If a DO is used, the DO will be emailed to the email address referenced on the MA as a .pdf file. Orders less than $10000.00 can be placed using a State of Maine issued P-Card (credit card).

Please provide the following information for the primary person users can contact to place orders less than $10000.00, follow up on orders and invoices:

Contact Person Name: _________________________________________________

Telephone: ______________________________________________

Email Address: ___________________________________________

The MA Documents will be emailed via DocuSign to be reviewed and signed, please provide the following information for the person who will sign the MA contract documents:

Contract Signer Name: ___________________________________________________

Title: _____________________________________________________

Email Address: _____________________________________________