CRYOSTAT FLOOR SHIM SPACER - 0.25.pdf
PDF 145 KB Posted
- Attached to
- Cryostat steel shims - IDIQ
- Solicitation number
- RFP_365026RLP
About this file
This technical drawing is a detailed design specification for a Cryostat Floor Shim Spacer, measuring 0.25 inches thick. The component is to be manufactured from SAE 304 or ANSI 321 stainless steel with precise dimensional tolerances. The primary dimensions are 14.00 ± 0.0625 inches [355.6 ± 1.6 mm] in length and width, with a thickness of 0.250 +0.020/-0.010 inches [6.4 +0.5/-0.3 mm]. Manufacturing notes specify that the steel must be cut to produce flat, square edges without sharpness, burrs, or damage, and must adhere to the specified material and tolerance requirements. The drawing is prepared by LBNF/DUNE (likely Lawrence Berkeley National Foundation/Deep Underground Neutrino Experiment), dated 9/5/2025, and uses third-angle projection with standard tolerancing guidelines.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A A
B B
C C
D D
SHEET 1 OF 1
DRAWN
CHECKED
APPROVED
MFG
EDMS#
arobin
9/5/2025
DWG NO
CFSS - 0.25
TITLE
CRYOSTAT FLOOR SHIM SPACER - 0.25"
SIZE
A
SCALE
REV
1 / 2
SAE 304 SS
MATERIAL
UNLESS NOTED OTHERWISE
DIMENSIONS ARE IN INCHES
STANDARD TOLERANCES
X.X
X.XX
X.XXX
FRACTION
ANGLES
± 0.050"
± 0.010"
± 0.005"
± 1/16"
± 1°
THIRD ANGLE PROJECTION
NOTES:
1. STEEL TO BE CUT USING METHOD THAT PRODUCES SIMILAR FLAT, SQUARE EDGES
2. EDGES SHALL NOT BE SHARP, HAVE BURRS, OR BE DAMAGED OR ROLLED
3. MATERIAL MUST BE EITHER SAE 304 OR ANSI 321 STAINLESS STEEL
14.00`.0625
355.6`1.6 mm[ ]
14.00`.0625
355.6`1.6 mm[ ]
0.250
.010
.020
6.4
.3
.5 mm
File details come from the government source that posted it. Updated .