Amendment 0002.pdf

0002 7 June 2023

Same as Blk 6

RFP15F06723R0000173

xx

12 May 2023

X 1

a. The purpose of this amendment is to remove and replace sections of the RFP, as stipulated in the attachment, Amnd 0002.

b. Questions and answers will be posted to SAM.gov NLT 9 June 2023.

c. Return all signed copies of amendment/s with the proposal/s.

FEDERAL BUREAU OF INVESTIGATION

PROCUREMENT SECTION

NATIONAL ACQUISITION PROGRAMS UNIT

X

AMENDMENT 0002

RFP 15F06723R0000173

Section C.3.4

Remove: C.3.4 Shields shall be available in black or O.D. Green (or similar).

Replace: C.3.4 Shields shall be available in black and O.D. Green (or similar).

Section C.4.1.4

Remove: C.4.1.4 Any shield with a viewport, the viewport shall be capable of withstanding at least one (1) impact from and of the listed threat projectiles. this RFQ.

Replace: C.4.1.4 Any shield with a viewport, the viewport shall be capable of withstanding at least one (1) impact from any of the listed threat projectiles. this RFQ.

Section C.4.2 SHIELD SIZES

Remove: Rifle‐rated, Compact size shield shall be no less than 16 inches and no greater than 18 inches in width at the widest point and no less than 28 inches in length.

Replace: Rifle‐rated, Compact size shield shall be no less than 15.5 inches and no greater than 18 inches in width at the widest point and no less than 28 inches in length.

Section M.3.6 PHASE III - Ballistic Resistance Testing

Add:

Edge Test

For the Edge tests, a line will be drawn one (1) inch from and parallel to the outer edge of the sample shield. A valid test shot must (a) impact the line as drawn or (b) impact closer to the outer edge of the sample armor than the line and not perforate the sample. A test shot that impacts the sample closer to the edge than the line and perforates the shield will be considered invalid and will not be counted against the Offeror. That test shot will be repeated, and the impact location must be, at a minimum, three (3) inches from the invalid impact. A test shot that impacts the sample further from the outer edge, and does not touch the line, and does not perforate the sample will be considered invalid and re-tested. A test shot that impacts the sample further from the outer edge, and does not impact the line, and perforates the sample will be considered a valid test shot and the perforation will be recorded against the Offeror.