RFP #:27-4200-07 Camden County LMIG/SAP 2026

BOARD OF COUNTY COMMISSIONERS

PROJECT:

ROAD ASPHALT RESURFACING LMIG/SAP 2026

REQUEST FOR PROPOSAL # P27-4200-07

PROPOSAL DUE: October 15th, 2026 2:00PM

CAMDEN COUNTY BOARD OF COMMISSIONERS

Camden County Road Resurfacing

NOTICE TO PROPOSERS

The Camden County Board of Commissioners is seeking proposals to furnish all labor, equipment, and materials for conducting road resurfacing/pavement preservation on existing paved roads.

Camden County is accepting two different price proposals to evaluate options for preserving our roads that best fit the needs of the county.

SUBMISSION: One (1) original and three (3) copies of required proposal document must be submitted in a sealed envelope marked “LMIG/SAP 2026 ROAD RESURFACING Proposal #P27-4200-07, mailed or dropped off at the address below.

U.S. Postal Service: FEDEX/UPS:

Camden County Board of Commissioners Attn: Purchasing Office P.O. Box 99 Woodbine, GA 31569

Camden County Board of Commissioners Attn: Purchasing Office 200 E. 4th St.

Woodbine, GA 31569

The proposal opening will be conducted in person on October 15th, 2026, at 2:00PM, in the historic court room, located at 200 East 4th Street, Woodbine, GA 31569. Proposal prices will not be read.

Proposals will be accepted at the above address until the time and date specified above, and immediately after will be publicly opened and contractor names only will be read aloud.

Proposals received after the required time or in any other location other than the Purchasing Office will not be accepted. Camden County will not be held liable for misdirected deliveries nor deliveries that are late due to shipping carrier. Faxed submissions will not be accepted.

All proposals submitted in response to this request shall become the property of Camden County and will be a matter of public record available for review after award.

Proposals may be withdrawn by written request only if the request is received prior to the time and date set for the opening proposals. Negligence on the part of the proposer in preparing the proposal confers no right of withdrawal or modification of the proposal after it has been opened. No proposal may be withdrawn for a period of Ninety (90) days after the time and date of opening of proposals.

QUESTIONS: regarding this project may be directed in writing to the Purchasing Officer, Kelsey Kelley, at 200E. 4th Street, Woodbine, Georgia 31569. All questions shall be received by October 5th, 2026, and answered by October 8th, 2026. Questions must be emailed to bids@camdencountyga.gov.

BONDS: The successful proposer will be required to furnish a Performance Bond and Payment Bond on or before the issuance of Notice to Proceed, each in the amount of 100% of the Contract Amount. All other required Contract Documents must be fully completed and executed by the Contractor and his/her Surety, and submitted to the Owner on or before the issuance of Notice to Proceed.

mailto:bids@camdencountyga.gov

The Owner reserves the right to reject any or all propsals, to waive informalities and to re-advertise, pursuant to federal and state law.

SCOPE OF WORK

Contractor will provide all labor, materials, equipment, and incidentals for bituminous surface treatment, hot mix overlay, thermoplastic striping, edge line rumble strips and raised pavement markings on approximately

13.2 miles. Work will consist of a single surface bituminous surface treatment with #89 stone used for the aggregate, followed by a 9.5 MM Superpave overlay. The surface treatment course shall be covered with hot mix asphalt prior to reopening the lane to traffic. This work will also include patching portions of the roadway as outlined in the mile log. The roads, mileage, and preferred method of pavement preservation & repair are listed in Appendix A. Striping will be thermoplastic, as per Section 653 of the GDOT Standard Specifications, consisting of 5” white edge lines and 5” yellow centerline and skip lines which will match existing roadway markings. Temporary paint will be required on all resurfaced segments prior to reopening the lane to traffic.

Construct SINUSOIDAL EDGELINE RUMBLE STRIPS-GROUND IN PLACE (CONTINUOUS), 6IN (150 MM), at locations as noted in log sheets in accordance with construction details T-35 and T-36.

Laydown yard for material and equipment can be provided for the contractor to use.

See Appendix A for Road List, Mileage & Preservation Type

See Appendix B for Standards

REMOVAL AND REPLACEMENT SCOPE: There are areas of isolated patching required prior to the surface treatment and asphalt. The scope includes removal of existing pavement to the existing base, verify elevations to ensure removal depth is sufficient to accommodate the replacement material thicknesses, add or remove subgrade material as necessary to establish the required elevation, compact and test the subgrade material and replace the base and pavement as follows:

• 4” Asphalt Binder, 19 mm Superpave as directed by engineer

All work to be done in accordance with the Georgia Department of Transportation Standard Specifications Construction of Transportation Systems, Current Edition (2021), Supplemental Specifications and Special Provisions for all bid line items included in the contract. See link to Website below.

Section 150, 400, 402, 424, 429, 456, 653 & 828 are all bid line items.

http://www.dot.ga.gov/PartnerSmart/Business/Source/specs/2021StandardSpecifications.pdf

SPECIFICATIONS

1. Work under this contract consists of furnishing all labor, material, tools, equipment and incidentals necessary to perform road resurfacing/pavement preservation on existing paved roads as indicated below.

The contractor shall provide and manage personnel who are to perform and complete the construction as specified herein to ensure that work is done in a safe, effective, and timely manner.

2. All roads are listed below.

3. Contract requirements: Contractors submitting bids shall certify in writing and submit with their bid that they possess or will possess all necessary equipment and personnel to fulfill the terms of the contract and be ready to begin upon award of authorized contract.

http://www.dot.ga.gov/PartnerSmart/Business/Source/specs/2021StandardSpecifications.pdf

4. Personnel Requirements:

a. Supervisor – The contractor shall have a competent and experienced supervisor/foreman on duty at all times when work is being performed under this contract.

b. Crew – The contractor shall at all times provide staff and staffing levels able to perform the work in accordance with this contract.

c. Dress Code – The minim dress code for contractor personnel for this contract shall be a clean and complete outfit, including pants, work boots, shirt and high visibility safety vest.

5. Equipment:

a. The equipment used shall be of sufficient type, capacity, and quantity to safely and efficiently perform the work specified in this contract. Equipment utilized by the contractor shall meet the following requirements:

i. All equipment shall be equipped with all necessary lighting and flags to provide for a safe operation.

ii. The equipment used by the contractor shall provide for a quality job at all times.

iii. Any equipment deemed unacceptable by the Public Works Director will not be allowed to operate until such guards are in place and properly maintained.

iv. Support vehicles, such as pickups and service trucks, shall be contractor equipped with a minimum of one (1) revolving or strobe type light with amber lens.

6. Safety and Traffic Control Requirements:

a. Equipment or materials moved on or across the traveled way at other times shall be done in a manner as not to unduly interfere with traffic.

b. The contractor shall, at all times, conduct his work so as to assure the least possible obstruction of traffic. The safety and convenience of the general public and the residents along the roadway and the protection of persons and property shall be provided for by the contractor as specified in the State of Georgia, Department of Transportation Standard Specifications Sections 104.05, 107.09 and 150. Traffic whose origin and destination is within the limits of the project shall be provided ingress and egress at all times unless otherwise specified by the County. The ingress and egress includes entrances and exits via driveways at various properties, and access to the intersecting roads and streets. The contractor shall maintain sufficient personnel and equipment (including flaggers and traffic control signing) on the project at all times, particularly during inclement weather, to ensure that ingress and egress are safely provided when and where needed. Two-way traffic shall be maintained at all times, utilizing pilot vehicles, unless otherwise specified or approved by the County. In the event of an emergency situation, the Contractor shall provide access to emergency vehicles and/or emergency personnel through or around the construction area.

Any pavement damaged by such an occurrence will be repaired by the Contractor at no additional cost to the County. The contractor shall furnish, install and maintain all necessary and required barricades, signs and other traffic control devices (including suitable lighting for night work) in accordance with the MUTCD and DOT specifications, and take all necessary precautions for the protection of the workers and safety of the public.

c. All scheduled operations shall be performed during the hours of daylight.

d. Any substantial vegetation or debris that may interfere with vehicle traffic or county road maintenance operations will be removed by the contract from the right-or-way and disposed of in the nearest wooded area. The removal of debris from road surfaces and ditches should be done in a timely manner, preferably daily, as to limit the likelihood of liable issues or maintenance interruptions.

e. Contractor equipment shall be parked in a safe location so as not to interfere with traffic.

f. The contractor shall suspend operations if weather conditions are such that operations cannot be carried out in a safe and effective manner.

g. The contractor shall notify the Public Works Director, in writing, of any accident that involves the contractor while fulfilling this contract.

h. In the event that any damage occurs during and is caused by the equipment used for mowing operations, the contractor will be required to repair or replace the damaged item with a like item at the contractor’s expense.

i. The contractor shall use proper signage and advanced warning signs as needed to assure safety of all personnel within the workspace.

7. Quality Acceptance:

a. For the purpose of inspection and control, the Public Works Director, or his delegate, will monitor the contractor’s progress and performance as work is performed.

b. Restoration and clean-up work shall be performed daily. Operations shall be suspended if the contractor fails to accomplish restoration and clean-up within an acceptable period of time. Any existing or new debris shall be removed from gutters, sidewalks, yards, driveways, etc. within the project limits. Failure to perform clean-up activities may result in suspension of the work.

8. Guarantee of work

a. Except as otherwise specified, all work shall be guaranteed by the contractor against defects resulting from the use of inferior materials, equipment or workmanship for one (1) year from the date of final acceptance.

INSURANCE REQUIREMENTS:

The Contractor must agree to maintain Workers’ Compensation and liability insurance for a minimum of one million dollars ($1,000,000) to protect the County from liability claims for damages because of bodily injury, including death, and from liability for damages to property. The contractor will furnish a certificate of said insurance to the Camden County Board of Commissioners before beginning the work or with submission of proposal if listed as part of the required documents.

NO CORRECTIONS:

Once a competitive proposal is submitted, the County shall NOT accept any request by any proposer to correct errors or omissions in any calculations or competitive price submitted. The only exception to allow a correction is the mistake must be clerical or mathematical in nature; it cannot be an error in judgment such as failure to properly price performance costs; the nature of the mistake must be readily apparent on the face of the bid itself;

and the intended bid price must be apparent as well. The bidder cannot resort to bid-preparation worksheets to prove its intended bid price. Based on the above circumstances, the allowance of the correction will be at the discretion of the Camden County Board of Commissioners.

AWARD:

The contract to purchase will be awarded to the most responsible, responsive bidder whose submission, conforming to the solicitation, will be most advantageous to the Camden County Board of Commissioners, price and other factors conferred, such as quality of equipment, conformity of the specifications and warranty. Any proposer who is in default to the Camden County Board of Commissioners at the time of submittal of the proposal shall have that proposal rejected.

The Camden County Board of Commissioners reserves the right to clarify any terms with the concurrence of the Vendor; however, any substantial non conformity in the offer, as determined by the Camden County Board of Commissioners, shall be deemed non-responsive and the offer rejected. The Camden County Board of Commissioners reserves the right to reject Proposals, or any part of any proposal, containing any additional terms or conditions not specifically requested in the original conditions and specifications.

The Camden County Board of Commissioners reserves the right to reject any or all proposals, or any part of any proposal, to award in part or in whole, to waive any informality in any submission, and to award a contract deemed to be in the best interest of the Camden County Board of Commissioners. Camden County Board of Commissioners reserves the right to accept or reject any and all responses, to waive irregularities, and to re-advertise as may be determined to be in the best interest of the County.

The Camden County Board of Commissioners reserves the right, at any time, to modify, waive, or otherwise vary the terms and conditions of this RFP including, but not limited to, the deadlines for submissions and submission requirements. The County further reserves the right to cancel or withdraw this RFP at any time. The County also reserves the right to negotiate mutually acceptable contract terms with the successful proposer.

DAYS OF COMPLETION:

Work shall be completed no later than April 30th 2027. The Contract time may be extended as approved by the Camden County Board of Commissioners in an amount equal to time lost due to delays beyond the control of Contractor. Such delays shall include, but not be limited to, acts or neglect by Owner or others performing additional work, fires, floods, abnormal weather conditions or acts of God.

HOLD HARMLESS:

The Vendor will indemnify, defend, and hold harmless the Camden County Board of Commissioners from loss for all suits, actions, or claims of any kind brought as a consequence of any negligent act or omission by the Vendor. The Vendor agrees that this clause shall include claims involving infringement of patent or copyright.

For purposes of this document, “County” and “Vendor” includes their employees, officials, agents and representatives.

RESTRICTED COMMUNICATION:

From the issue date of this RFP until a successful Offeror is selected and the selection is awarded, proposers are not allowed to communicate for any reason with any employees of the Owner, the Board, or members of the Selection Committee with respect to this RFP or the Project, except for (i) submission of questions to Purchasing Officer only as authorized by this RFP, (ii) during the pre-proposal conference, if applicable, (iii) during scheduled and authorized interviews for purposes of evaluation, and (iv) during authorized negotiations following opening of the Proposals. For violation of this provision, the Owner reserves the right to reject the Proposal of the offending proposer. No verbal agreements will be binding upon the County.

PAYMENT:

Contractors shall provide their federal employer identification number on a standard W-9 form within 15 days after award in order not to delay payment. Contractor shall submit request for payment directly to Camden County for payment issuance.

Invoices shall be submitted to: Camden County Board of Commissioners Attn: Jared Beaudoin Public Works Director P O Box 99 Woodbine, GA 31569 jrbeaudoin@co.camden.ga.gov

Monthly Payment: This section is to control payments and is entered into instead of the Georgia prompt payment act O.C.G.A. 13-11-1. Not later than the fifth day of every month the Contractor shall prepare and submit a Request for Periodic Payment, along with an Affidavit of Payment of Claims, covering the total quantities under each item of work that has been completed from the start of the job up to and including the last day of the preceding month, and the value of the work so completed determined in accordance with the schedule of values for such items together with such supporting evidence as may be required by the Owner or its designee. This estimate may also include an allowance for the cost of such materials and equipment required in the permanent work as has been delivered to the site or stored in an approved location and suitably protected but not as yet incorporated for the work. Under no circumstances shall any material or equipment, for which payment has been made by the Owner to the Contractor, be sold, returned to the supplier or otherwise moved from the storage except for incorporation into the work as covered in this contract without written authorization from the Owner. Not later than the 30th day after submitting an accepted, approved and correct estimate along with all required documentation (as per these contract documents) as detailed in the above paragraph, the Owner shall, after deducting previous payments made, pay to the Contractor 90% of the amount of the estimate as approved by the Owner, as long as the gross value of completed work is less than 50% of the total contract amount, or if the Contractor is not maintaining his construction schedule to the satisfaction of the Owner, the Owner shall retain 10% of the gross value of the completed work as indicated by the current approved estimate. After the gross value of the completed work becomes equal to 50% of the total contract amount within a time period satisfactory to the Owner, than the Owner will continue to retain the 10% of the first 50% of the work but will not require any additional retainage; provided, however, that if work is unsatisfactory or falls behind schedule, retention may be resumed at the previous level after notification to the Contractor. Retention of contractual payments and the retention of the escrow accounts for contracts for the installation, improvement, maintenance or repair of water or sewer facilities shall be in accordance with the Georgia Retainage Law, Section 13-10-20, Article 2, as found in the O.C.G.A. Before final payment is due, the Contractor shall submit evidence satisfactory to the County that all payrolls, material bills, and other indebtedness connected with the work have been paid, except that in the case of disputed indebtedness or liens, the Contractor may submit in lieu of evidence of payment an additional Surety Bond satisfactory to the Owner guaranteeing payment of all such disputed amounts when adjudicated

TERM OF AGREEMENT:

The agreement shall become effective upon execution of a contract, the receipt of all required documents and approval of the contract by Camden County Board of Commissioners.

GENERAL INSTRUCTIONS:

Proposal must contain a manual signature of an authorized representative. Proposals must be typed or printed in ink. Use of erasable ink is not permitted. All corrections by Proposer to any Proposal entry must be initialed.

REQUIRED DOCUMENTS TO BE SUBMITTED:

One (1) original and three (3) copies of documents which must include the following information:

1. Solicitation Schedule

2. References

3. E-Verify Contractor and/or Sub-Contractor/Sub-Subcontractor Affidavit (Must be a Notarized Original)

4. List of Subcontractors

5. Statement of Proposer Qualifications

6. Non -Collusion

7. Proposal Signature Page & Addendums of applicable

8. Proposal Fee Schedule

9. Outline of anticipated schedule of work to be performed and description of work to be performed

10. Copy of firm’s current Certificate of Insurance

11. Copy of signed W-9

SOLICIATION SCHEDULE:

RFP Available 09/17/2026 Questions Due Date 10/05/2026 Proposal Due Date 10/15/2026 2:00PM

CONTACT INFORMATION:

Person to contact regarding this proposal:

Title:

Phone: Fax:

Email Address:

Name of person authorized to bind the Firm:

Signature:

Date:

Name of Company:

Address:

FAILURE TO RETURN THIS PAGE AS PART OF YOUR PROPOSAL MAY RESULT IN

PROPOSAL BEING DEEMED NON-RESPONSIVE.

REFERENCES

Camden County Board of Commissioners requests a minimum of three, (3) references where work of a similar size and scope has been completed. No references shall be the same as other references provided under this proposal.

References

Proposers shall provide references on this form.

1. Firm Name______________________________________________________________

Brief Description of Project_________________________________________________

Completion Date__________________________________________________________

Contact________________________________Phone____________________________

Title_________________________________E-mail_____________________________

2. Firm Name______________________________________________________________

3. Firm Name______________________________________________________________

CONTRACTOR AFFIDAVIT AND AGREEMENT

(THIS FORM SHOULD BE FULLY COMPLETED AND RETURNED WITH YOUR PROPPSAL

PACKET)

By executing this affidavit, the undersigned contractor verifies its compliance with O.C.G.A. § 13-10-91, stating affirmatively that the individual, firm or corporation which is engaged in the physical performance of services on behalf of the Camden County Board of Commissioners has registered with, is authorized to use and uses the federal work authorization program commonly known as E-Verify, or any subsequent replacement program, in accordance with the applicable provisions and deadlines established in O.C.G.A. § 13-10-91. Furthermore, the undersigned contractor will continue to use the federal work authorization program throughout the contract period and the undersigned contractor will contract for the physical performance of services in satisfaction of such contract only with subcontractors who present an affidavit to the contractor with the information required by O.C.G.A. § 13-10-91(b). Contractor hereby attests that its federal work authorization user identification number and date of authorization are as follows:

Federal Work Authorization User Identification Number (E-verify Number)

Date of Authorization

Name of Contractor

Address of Contractor

City, State and Zip Code

Name of Project I hereby declare under the penalty of perjury that the foregoing is true and correct.

Executed on _________, ____, 202_ in ____________ (City), __________ (State).

Signature of Authorized Officer or Agent (Contractor)

Title of Authorized Officer or Agent (Contractor)

Printed Name of Authorized Officer or Agent SUBSCRIBED AND SWORN BEFORE ME ON THIS

THE _____ DAY OF ______________________,

202_

Notary Public My Commission Expires: _______________

SUBCONTRACTOR AFFIDAVIT AND AGREEMENT

(THIS FORM SHOULD BE FULLY COMPLETED AND RETURNED WITH YOUR PROPOSAL

PACKET IF APPLICABLE)

By executing this affidavit, the undersigned subcontractor verifies its compliance with O.C.G.A. 13-10-91, stating affirmatively that the individual, firm or corporation which is engaged in the physical performance of services under a contract with (name of contractor) on behalf of Camden County Board of Commissioners has registered with and is participating in a federal work authorization program* [any of the electronic verification of work authorization programs operated by the United States Department of Homeland Security or any equivalent federal work authorization program operated by the United States Department of Homeland Security to verify information of newly hired employees, pursuant to the Immigration Reform and Control Act of 1986 (IRCA), P.L. 99-603], in accordance with the applicability provisions and deadlines established in O.C.G.A. 13- 10-91.

EEV / Basic Pilot Program* User Identification Number

BY: Authorized Officer or Agent Signature Date (Subcontractor Name)

Title of Authorized Officer or Agent of Subcontractor

Printed Name of Authorized Officer or Agent

SUBSCRIBED AND SWORN BEFORE ME ON THIS THE

_____ DAY OF ______________________, 202_.

My Commission Expires: __________________________

CAMDEN COUNTY BOARD OF COMMISSIONER

CAMDEN COUNTY, GEORGIA

LIST OF SUBCONTRACTORS FORM

I do__________, do not _____________ propose to subcontract some of the work on this project. I propose to Sub-contract work to the following subcontractors:

NAME AND ADDRESS TYPE OF WORK

STATEMENT OF PROPOSERS QUALIFICATIONS

(To be subscribed and sworn to before a notary public)

The proposer submits the following statement of proposer’s qualification for consideration by the Owner.

Legal Name of Bidder/Firm:_____________________________________________________

Street Address: _____________________________________________________________________

Telephone Number: _____________________________________________________________

Email Address: ________________________________________________________________

When Organized: _________________________ Where Incorporated: ____________ Number of years engaged in business under the present firm ____________

Plan of Organization: ___Proprietorship ___Corporation ___Partnership

The proposer has never refused to sign a contract at the original bid. ____T _____F The proposer has never been declared default on a contract. __T _____F The proposer has never been debarred by the Federal Government T _____F Remarks:

The foregoing statement of qualifications is submitted under oath.

Under oath, I certify that I am a principal or other representative of the firm of __________________________________________________________________and I am authorized by it to execute the foregoing offer on its behalf. I am a principal person of the foregoing with management responsibility for the foregoing subject matter and as such, I am personally knowledgeable of all its pertinent matters. The foregoing statements of facts in the foregoing proposal are true.

I certify that this proposal is made without prior understanding, agreement, or connection with any corporation, firm or person submitting a bid for the same materials, labor supplies or equipment and is in all respects, fair and without collusion or fraud. We understand collusive proposals are a violation of state and federal law and can result in fines, prison sentences and civil damage awards. We agree to abide by all conditions of this proposal.

The full name and addresses of persons and firms interested in the foregoing proposal as principals are as follows:

Date: ____________________________________________________

STATEMENT OF PROPOSERS QUALIFICATIONS (cont)

Legal Name of Firm: ____________________________________________________________

By (Signature):_________________________________________________________________

Printed Name: _________________________________________________________________

Title: _________________________________________________________________________

Sworn to and subscribed before this ____________day of ________________________________202__.

My commission expires: ____________________________________

FAILURE TO RETURN THIS PAGE AS PART OF YOUR PROPOSAL MAY RESULT IN THE

PROPOSAL BEING DEEMED NON-RESPONSIVE.

NON-COLLUSION AFFIDAVIT

COUNTY OF: _____________________________

STATE OF: ________________________________

Before me, the Undersigned proposer being duly sworn on oath, a Notary Public, for and in the County and

State aforesaid, personally appeared ___________________________________and made oath that the

Contractor herein, his agents, servants, and/or employees, to the best of his knowledge and belief, have not in any way colluded with anyone for and on behalf of the Contractor, or themselves, to obtain information that would give the Contractor an unfair advantage over others, nor have they colluded with anyone for and on behalf of the Contractor, or themselves, to gain any favoritism in the award of the contract herein. He or she further states that no person or person, firms, or corporation has, have or will receive directly or indirectly, any rebate, fee gift, commission or thing of value on account of such sale.

Oath and Affirmation

I hereby affirm under the penalties for perjury that the facts and information contained in the foregoing proposal for public works are true and correct.

Dated this day______ of ____________________, _______________

Authorized Signature for Contractor: _________________________________________

Title: __________________________________________________________________

Contractor's name (print):____________________________________

SWORN TO BEFORE ME THIS ______DAY OF_____________, 20_____

NOTARY PUBLIC FOR THE STATE OF ______________________

My Commission Expires: ______________________

Notary Public Signature________________________

Printed Name: __________________________________

Phone Number:_____________________________Address:_____________________________

(Note: Notary seal required for foreign Contractor

PROPOSAL SIGNATURE PAGE

1. The undersigned proposer proposes and agrees, if this proposal is accepted, to enter into an agreement with Owner in the form included in the Contract Documents to perform and furnish all Work as specified or indicated in the Contract Documents for the proposal price and within the proposal times indicated in this proposal and in accordance with the other terms and conditions of the Contract Documents.

2. Proposer accepts all of the terms and conditions of the Invitation and Instructions to proposers, including without limitation those dealing with the disposition of bid security. This proposal will remain subject to acceptance for 60 days after the day of proposal opening, or for such longer period of time that proposer may agree to in writing upon request of Owner.

3. In submitting this proposal, Proposer represents, as more fully set forth in the Agreement, that:

(a) Proposer has examined and carefully studied the Plans (if any), Specifications for the work, Deliverables and contractual documents relative thereto, and has read all Technical Provisions, Supplementary Conditions, and General Conditions, furnished prior to the opening of proposals;

that proposer has satisfied himself relative to the work to be performed.

(b) Proposer further acknowledges hereby receipt of the following Addenda:

ADDENDUM NO. DATE

Proposers are advised that it is their responsibility to verify that any and all amendments have been received prior to submission of the bid. In case any proposer fails to acknowledge receipts of any such amendments in the space provided on the proposal form, the proposal will nevertheless be construed as though the amendment have been received and acknowledged, and the submission of the proposal will constitute acknowledgement of the receipt of amendments.

(c) Proposer has visited the site and become familiar with and is satisfied as to the general, local and site conditions that may affect cost, progress, performance and furnishing of the Work;

(d) Proposer is familiar with and is satisfied as to all federal, state and local Laws and Regulations that may affect cost, progress, performance and furnishing of the Work.

(e) Proposer is aware of the general nature of Work to be performed by Owner and others at the site that relates to Work for which this bid is submitted as indicated in the RFP Documents.

(f) Proposer has correlated the information known to proposer, information and observations obtained from visits to the site, reports and drawings identified in the RFP Documents and all additional examinations, investigations, explorations, tests, studies and data with the RFP Documents.

(g) Proposer has given County Contract Administrator, if any, written notice of all conflicts, errors, ambiguities or discrepancies that Proposer has discovered in the RFP Documents and the written resolution thereof by County Contract Administrators acceptable to Proposer. The RFP Documents are generally sufficient to indicate and convey understanding of all terms and conditions for performing and furnishing the Work for which this bid is submitted.

(h) This proposal is genuine and not made in the interest of or on behalf of any undisclosed person, firm or corporation and is not submitted in conformity with any agreement or rules of any group, association, organization or corporation; Proposer has not directly or indirectly induced or solicited any other Proposer to submit a false or sham proposal; Proposer has not solicited or induced any person, firm or corporation to refrain from bidding; and Bidder has not sought by collusion to obtain for itself any advantage over any other Bidder or over Owner. The Bidder’s signature below certifies that there is no risk of potential conflicts of interest and particularly conflicts of interest under FEMA guidelines that should prevent the County from entering into a Contract with your firm pursuant to this RFP.

Person to contact regarding this Proposal: ____________________________________________

Title: _________________________

Phone:____________________ Email_______________________________________

Address: ________________________________________________________________

Name of person authorized to bind the Firm__________________________________________

Signature: __________________________________ Date: _________________________________

Name of Company: _____________________________________________________________

Address: _____________________________________________________________________

SUBSCRIBED AND SWORN BEFORE ME ON THIS THE _____ DAY OF ______________________, 202_

Notary Public My Commission Expires: ______________________

Detailed Estimate

County Camden

Project

LMIG/SAP

Item # Description Unit Qty Unit Price Total Price

150-1000 TRAFFIC CONTROL - LS 1

402-1802 RECYCLED ASPH CONC PATCHING, INCL BITUM MATL & H LIME TN 620

402-3103

RECYCLED ASPH CONC 9.5 MM SUPERPAVE, TYPE II, GP 2 ONLY,

INCL BITUM MATL & H LIME TN 6,805

424-5089 SINGLE SURFACE TRTMT, STN SIZE 89, GP 1 OR 2 SY 128,018

429-1000 RUMBLE STRIPS EA 12

456-2082

SINUSOIDAL EDGELINE RUMBLE STRIPS – GROUND IN PLACE

CONTINUOUS, 6 IN (150 MM) GLM 23.2

653-0100 THERMOPLASTIC PVMT MARKING, RR/HWY CROSSING SYMBOL EA 4

653-1704 THERMOPLASTIC SOLID TRAF STRIPE, 24 IN, WHITE LF 160

653-2501 THERMOPLASTIC SOLID TRAF STRIPE, 5 IN, WHITE LM 26.6

653-2502 THERMOPLASTIC SOLID TRAF STRIPE, 5 IN, YELLOW LM 12.89

653-3501 THERMOPLASTIC SKIP TRAF STRIPE, 5 IN, WHITE GLF 100

653-4502 THERMOPLASTIC SKIP TRAF STRIPE, 5 IN, YELLOW GLM 7.59

654-1001 RAISED PVMT MARKERS TP 1 EA 2,330

654-1002 RAISED PVMT MARKERS TP 2 EA 555

654-1003 RAISED PVMT MARKERS TP 3 EA 25

PROJECT TOTAL PROPOSED

(MILES)

LOG COLERAIN ROAD

ROADWAY

WIDTH

0.000

BEGIN PROJECT AT PAVEMENT JOINT 82 FT NORTH OF CENTERLINE OF SR 40

BEGIN FULL WIDTH SINGLE SURFACE TREATMENT INTERLAYER

BEGIN FULL WIDTH THIN LIFT OVERLAY WITH 85 LBS/SY OF 9.5 MM SUPERPAVE

BEGIN THERMOPLASTIC STRIPING & RPM’S

INSTALL (3) RUMBLE STRIPS IN LANE APPROACHING SR 40 AS PER GDOT CONTSRUCTION DETAIL T-19 21

0.141 PATCHING – 6 FT X 20 FT; RIGHT LANE

0.175 PATCHING – 20 FT X 30 FT; RIGHT & LEFT LANE

0.325 PATCHING – 10 FT X 50 FT; RIGHT LANE

0.339 PATCHING – 10 FT X 88 FT; RIGHT LANE

0.425 PATCHING – 6 FT X 20 FT; RIGHT LANE

0.745 PATCHING – 20 FT X 30 FT; RIGHT & LEFT LANE

1.245 PATCHING – 20 FT X 22 FT; RIGHT & LEFT LANE

1.265 PATCHING – 6 FT X 15 FT; RIGHT LANE

1.566 BEGIN RIGHT TURN LANE 33

1.575 PATCHING – 6 FT X 80 FT; RIGHT TURN LANE

1.636 CENTERLINE OF ZION CEMETERY RD - LEFT

1.647

END RIGHT TURN LANE

CONTINUE FULL WIDTH SINGLE SURFACE INTERLAYER

BEGIN FULL WIDTH RESURFACING WITH 110 LBS/SY OF 9.5 MM SUPERPAVE

BEGIN SINUSOIDAL EDGELINE RUMBLE STRIPS – GROUND IN PLACE (CONTINUOUS), 6 IN RIGHT & LEFT

CONTINUE THERMOPLASTIC STRIPING & RPM’S 21

1.685 PATCHING – 6 FT X 50 FT; RIGHT LANE

3.125

PATCHING – 6 FT X 10 FT; LEFT LANE

PATCHING – 6 FT X 20 FT; RIGHT LANE

3.328

CENTERLINE OF RAILROAD CROSSING

RESURFACE TO WITHIN 15 FT OF EACH SIDE OF THE TRACKS

TRANSITION PAVEMENT FOR A SMOOTH TIE-IN TO CROSSING

3.365 PATCHING – 20 FT X 6 FT; RIGHT & LEFT LANE

3.385

END FULL WIDTH SINGLE SURFACE INTERLAYER

END FULL WIDTH RESURFACING WITH 110 LBS/SY OF 9.5 MM SUPERPAVE

END SINUSOIDAL EDGELINE RUMBLE STRIPS – GROUND IN PLACE (CONTINUOUS), 6 IN RIGHT & LEFT

END THERMOPLASTIC STRIPING & RPM’S

INSTALL (3) RUMBLE STRIPS IN LANE APPROACHING SR 25 AS PER GDOT CONSTRUCTION DETAIL T-19

END PROJECT AT PAVEMENT JOINT 51 FT SOUTH OF CENTERLINE OF SR 25

LOG

VACUNA ROAD

ROADWAY

WIDTH

0.000

BEGIN PROJECT 60 FT SOUTH OF CENTERLINE OF SR 40

BEGIN SINUSOIDAL EDGELINE RUMBLE STRIPS – GROUND IN PLACE (CONTINUOUS), 6 IN RIGHT & LEFT

BEGIN THERMOPLASTIC STRIPING & RPM’S

1.368 CENTERLINE OF EDGEWOOD DRIVE

1.374

BEGIN FULL WIDTH SURFACE TREATMENT

BEGIN FULL WIDTH OVERLAY WITH 110 LBS/SY OF 9.5 MM SUPERPAVE

CONTINUE SINUSOIDAL EDGELINE RUMBLE STRIPS – GROUND IN PLACE (CONTINUOUS), 6 IN RIGHT &

LEFT

CONTINUE THERMOPLASTIC STRIPING & RPM’S

20 FT TRAVEL LANES WITH 2 FT PAVED SHOULDERS LEFT & RIGHT 24

1.541 PATCHING – 6 FT X 110 FT; RIGHT LANE

1.616 PATCHING – 6 FT X 95 FT; LEFT LANE

1.617 PATCHING – 6 FT X 10 FT; RIGHT LANE

1.684 PATCHING – 6 FT X 74 FT; RIGHT LANE

2.054 PATCHING – 20 FT X 58 FT; RIGHT & LEFT LANE

2.073 LANE WIDTH CHANGE 21

2.528 PATCHING – 6 FT X 158 FT; RIGHT LANE

3.590 PATCHING – 6 FT X 10 FT; RIGHT LANE

3.705 PATCHING – 6 FT X 10 FT; RIGHT LANE

3.853

END FULL WIDTH SURFACE TREATMENT

END FULL WIDTH OVERLAY WITH 110 LBS/SY OF 9.5 MM SUPERPAVE AT EDGE OF PAVEMENT TO

CLARKS BLUFF ROAD

CONTINUE THERMOPLASTING STRIPING, RPMS AND SINUSOIDAL EDGELINE RUMBLE STRIPS - GROUND

IN PLACE (CONTINUOUS), 6 IN RIGHT & LEFT ON VACUNA ROAD

3.858 CENTERLINE OF CLARKS BLUFF ROAD

4.696 CENTERLINE OF R/R CROSSING

4.729

END THERMOPLASTIC STRIPING, RPM’S AND RPMS AND SINUSOIDAL EDGELINE RUMBLE STRIPS -

GROUND IN PLACE (CONTINUOUS), 6 IN RIGHT & LEFT

END PROJECT AT PAVEMENT JOINT 62 FT WEST OF CENTERLINE OF SR 25/US 17

LOG

REFUGE ROAD

ROADWAY

WIDTH

0.000

BEGIN PROJECT AT PAVEMENT JOINT 64 FT WEST OF CENTERLINE OF SR 25/US 17

BEGIN FULL WIDTH SINGLE SURFACE TREATMENT INTERLAYER

BEGIN FULL WIDTH OVERLAY WITH 110 LBS/SY OF 9.5 MM SUPERPAVE

BEGIN THERMOPLASTIC STRIPING & RPM’S

BEGIN SINUSOIDAL EDGELINE RUMBLE STRIPS – GROUND IN PLACE (CONTINUOUS), 6 IN RIGHT & LEFT INSTALL (3) RUMBLE STRIPS IN LANE APPROACHING SR 25/US 17 AS PER GDOT CONTSRUCTION DETAIL T-19 24

0.072 PATCHING – 6 FT X 89 FT; RIGHT LANE

0.234 PATCHING – 6 FT X 5 FT; LEFT LANE

0.270 PATCHING – 6 FT X 5 FT; LEFT LANE

0.686 PATCHING – 6 FT X 5 FT; RIGHT LANE

2.052 PATCHING – 6 FT X 290 FT; LEFT LANE

2.107

PATCHING – 6 FT X 300 FT; RIGHT LANE

PATCHING – 6 FT X 300 FT; LEFT LANE

2.324 PATCHING – 25 FT X 15 FT; RIGHT & LEFT LANE

2.384 PATCHING – 6 FT X 100 FT; RIGHT LANE

2.416 PATCHING – 6 FT X 47 FT; RIGHT LANE

2.425 PATCHING – 6 FT X 26 FT; LEFT LANE

2.436 PATCHING – 6 FT X 179 FT; RIGHT LANE

2.551 PATCHING – 6 FT X 132 FT; LEFT LANE

2.631 PATCHING – 6 FT X 607 FT; LEFT LANE

3.010

END FULL WIDTH SINGLE SURFACE TREATMENT INTERLAYER

END FULL WIDTH OVERLAY WITH 110 LBS/SY OF 9.5 MM SUPERPAVE

BEGIN PAVING EXCEPTION

CONTINUE THERMOPLASTING STRIPING, RPMS AND SINUSOIDAL EDGELINE RUMBLE STRIPS - GROUND

IN PLACE (CONTINUOUS), 6 IN RIGHT & LEFT

4.487

END PAVING EXCEPTION

BEGIN FULL WIDTH SINGLE SURFACE TREATMENT INTERLAYER

BEGIN FULL WIDTH OVERLAY WITH 110 LBS/SY OF 9.5 MM SUPERPAVE

CONTINUE THERMOPLASTIC STRIPING & RPM’S

CONTINUE SINUSOIDAL EDGELINE RUMBLE STRIPS – GROUND IN PLACE (CONTINUOUS), 6 IN RIGHT &

LEFT

4.508 PATCHING – 6 FT X 142 FT; LEFT LANE

4.524 PATCHING – 6 FT X 227 FT; RIGHT LANE

4.670 PATCHING – 6 FT X 58 FT; LEFT LANE

4.972 PATCHING – 6 FT X 47 FT; LEFT LANE

5.086

END FULL WIDTH SINGLE SURFACE TREATMENT INTERLAYER

END FULL WIDTH OVERLAY WITH 110 LBS/SY OF 9.5 MM SUPERPAVE

END SINUSOIDAL EDGELINE RUMBLE STRIPS – GROUND IN PLACE (CONTINUOUS), 6 IN RIGHT & LEFT INSTALL (3) RUMBLE STRIPS IN LANE APPROACHING SR 25/US 17 AS PER GDOT CONTSRUCTION DETAIL T-19

END PROJECT AT PAVEMENT JOINT 48 FT EAST OF SR 252

APPENDIX A: ROAD LIST, MILEAGE, PRESERVATION TYPE

2026 LMIG ROADS

Street Name Length Recommended Preservations

Colerain RD (Partial) 1.647 Chip Seal / Isolated Patching / Overlay w/ 9.5 MM SP @ 85 LBS/SY Colerain RD (Partial) 1.738 Chip Seal/ Isolated Patching / Overlay w/ 9.5 MM SP @ 110 LBS/SY

Refuge RD (Partial) 3.609 Chip Seal/ Isolated Patching / Overlay w/ 9.5 MM SP @ 110 LBS/SY Vacuna RD (Partial) 2.479 Chip Seal/ Isolated Patching / Overlay w/ 9.5 MM SP @ 110 LBS/SY

2026 SAP ROADS

Street Name Length Recommended Striping

Colerain RD 1.647 Thermoplastic Markings w/ RPM’s Colerain RD 1.738 Thermoplastic Markings w/ Edge Line Rumble Strips & RPM’s

Refuge RD 5.086 Thermoplastic Markings w/ Edge Line Rumble Strips & RPM’s Vacuna RD 4.729 Thermoplastic Markings w/ Edge Line Rumble Strips & RPM’s

APPENDIX B: STANDARDS