RFP 2027-1200-0113 - Large Class Patrol Vessel Build.pdf

PDF 2 MB Posted

Attached to
Request for Proposal (RFP) - 2027-1200-0113 - Large Class Patrol Vessel Build
Solicitation number
Request for Proposal (RFP) - 2027-1200-0113 - Large Class Patrol Vessel Build
Issued by
Alaska

About this file

This Request for Proposals (RFP 2027-1200-0113) is issued by the State of Alaska Department of Public Safety, Division of Administrative Services, for the construction of a large class patrol vessel to be utilized for law enforcement throughout Alaskan waters. The State seeks a shipyard to build a new steel hull vessel with aluminum house construction of minimum 75 feet in length, designed for sea-keeping operations in Alaska waters. Offerors must demonstrate prior experience by providing a minimum of three examples of successful new vessel construction projects completed within the last 20 years, with priority given to similar projects. Proposals must be submitted via email as separate PDF documents (technical and cost proposals) by 4:30 p.m. Alaska Standard Time on November 30, 2026. A pre-proposal teleconference is scheduled for 10:00 a.m. Alaska Standard Time on November 12, 2026, via MS Teams. The contract term extends approximately two years from the award date of December 22, 2026, through completion targeted for December 31, 2028, with potential month-to-month extensions subject to State discretion. The delivered vessel must be free and clear of all liens, claims, encumbrances, and mortgages.

The State has appropriated $8,500,000 for this contract, with any additional funds contingent upon legislative appropriation. This is a firm fixed price contract with payments based on a negotiated payment schedule tied to progress reports and invoices approved by the project director. All work must be performed in the United States, and the contractor must certify this requirement or request a waiver at least ten days prior to the proposal deadline. The contractor is responsible for procuring all materials and equipment except State-furnished items identified in the Material List, and State acquires title to all materials and components upon incorporation into the vessel while the contractor retains all risk of loss or damage until delivery and acceptance. Comprehensive insurance requirements are mandated, including marine general liability ($25,000,000 per occurrence), workers' compensation with maritime endorsements, pollution liability ($25,000,000 per occurrence), and professional liability insurance ($5,000,000 per claim). Evaluation criteria allocate 25% to experience and qualifications, 15% to construction management plan, and 60% to contract cost, with an additional 10% Alaska Offeror Preference available to qualifying bidders holding valid Alaska business licenses prior to the proposal deadline.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATE OF ALASKA

REQUEST FOR

PROPOSALS

OFFERORS ARE NOT REQUIRED TO RETURN THIS FORM.

IMPORTANT NOTICE: IF YOU RECEIVED THIS SOLICITATION FROM THE STATE OF ALASKA’S

“ONLINE PUBLIC NOTICE” WEB SITE, YOU MUST REGISTER WITH THE PROCUREMENT OFFICER

LISTED IN THIS DOCUMENT TO RECEIVE NOTIFICATION OF SUBSEQUENT AMENDMENTS. FAILURE

TO CONTACT THE PROCUREMENT OFFICER MAY RESULT IN THE REJECTION OF YOUR OFFER.

ISSUED BY:

DEPARTMENT OF PUBLIC SAFETY

DIVISION OF ADMINISTRATIVE SERVICES

PRIMARY CONTACT:

JASON MONKELIEN

PROCUREMENT OFFICER

JASON.MONKELIEN@ALASKA.GOV

(907) 269-5582

LARGE CLASS PATROL VESSEL BUILD

RFP 2027-1200-0113

ISSUED NOVEMBER 9, 2026

CONSTRUCTION OF A LARGE CLASS PATROL VESSEL

STATE OF ALASKA – REQUEST FOR PROPOSALS RFP 2027-1200-0113

2 Rev. 8/24

TABLE OF CONTENTS

SECTION 1. INTRODUCTION & INSTRUCTIONS

SEC. 1.01 PURPOSE OF THE RFP

SEC. 1.02 BUDGET

SEC. 1.03 DEADLINE FOR RECEIPT OF PROPOSALS

SEC. 1.04 PRIOR EXPERIENCE

SEC. 1.05 REQUIRED REVIEW

SEC. 1.06 QUESTIONS PRIOR TO DEADLINE FOR RECEIPT OF PROPOSALS

SEC. 1.07 RETURN INSTRUCTIONS

SEC. 1.08 ASSISTANCE TO OFFERORS WITH A DISABILITY

SEC. 1.09 AMENDMENTS TO PROPOSALS

SEC. 1.10 AMENDMENTS TO THE RFP

SEC. 1.11 RFP SCHEDULE

SEC. 1.12 PRE-PROPOSAL TELECONFERENCE

SEC. 1.13 ALTERNATE PROPOSALS

SEC. 1.14 NEWS RELEASES

SECTION 2. BACKGROUND INFORMATION

SEC. 2.01 BACKGROUND INFORMATION

SECTION 3. SCOPE OF WORK & CONTRACT INFORMATION

SEC. 3.01 SCOPE OF WORK

SEC. 3.02 CONTRACT TERM AND WORK SCHEDULE

SEC. 3.03 CONSTRUCTION SCHEDULE

SEC. 3.04 ACCESS AND INSPECTION

SEC. 3.05 DELIVERABLES

SEC. 3.06 CONTRACT TYPE

SEC. 3.07 PROPOSED PAYMENT PROCEDURES

SEC. 3.08 CONTRACT PAYMENT

SEC. 3.09 LOCATION OF WORK

SEC. 3.10 ACQUISITION OF MATERIAL

SEC. 3.11 PROTECTION OF PERSONNEL, VESSEL, AND MATERIALS

SEC. 3.12 SUBCONTRACTORS

SEC. 3.13 JOINT VENTURES

SEC. 3.14 RIGHT TO INSPECT PLACE OF BUSINESS

SEC. 3.15 CONTRACT PERSONNEL

SEC. 3.16 INSPECTION & MODIFICATION - REIMBURSEMENT FOR UNACCEPTABLE DELIVERABLES

SEC. 3.17 CONTRACT CHANGES - UNANTICIPATED AMENDMENTS

SEC. 3.18 NONDISCLOSURE AND CONFIDENTIALITY

SEC. 3.19 REGULATORY REQUIREMENTS

SEC. 3.20 INDEMNIFICATION

SEC. 3.21 INSURANCE REQUIREMENTS

SEC. 3.22 BUILDERS RISK INSURANCE

SEC. 3.23 TERMINATION FOR DEFAULT

SECTION 4. PROPOSAL FORMAT AND CONTENT

SEC. 4.01 INTRODUCTION

SEC. 4.02 PROPOSAL CONTENTS

SEC. 4.03 EXPERIENCE AND QUALIFICATIONS

SEC. 4.04 CONSTRUCTION MANAGEMENT PLAN

SEC. 4.05 COST PROPOSAL

SEC. 4.06 EVALUATION CRITERIA

SECTION 5. EVALUATION CRITERIA AND CONTRACTOR SELECTION

SEC. 5.01 SUMMARY OF EVALUATION PROCESS

SEC. 5.02 EVALUATION CRITERIA

SEC. 5.03 SCORING METHOD AND CALCULATION

SEC. 5.04 EXPERIENCE AND QUALIFICATIONS (25%)

SEC. 5.05 CONSTRUCTION MANAGEMENT PLAN (15%)

SEC. 5.06 CONTRACT COST (60%)

SEC. 5.07 ALASKA OFFEROR PREFERENCE (10%)

SECTION 6. GENERAL PROCESS AND LEGAL INFORMATION

SEC. 6.01 INFORMAL DEBRIEFING

SEC. 6.02 ALASKA BUSINESS LICENSE AND OTHER REQUIRED LICENSES

SEC. 6.03 SITE INSPECTION

3 Rev. 8/24

SEC. 6.04 QUALITY OF WORK

SEC. 6.05 DOCUMENTATION

SEC. 6.06 DESIGN, PLANS, DRAWINGS, ETC

SEC. 6.07 CLARIFICATION OF OFFERS

SEC. 6.08 DISCUSSIONS WITH OFFERORS

SEC. 6.09 EVALUATION OF PROPOSALS

SEC. 6.10 CONTRACT NEGOTIATION

SEC. 6.11 FAILURE TO NEGOTIATE

SEC. 6.12 OFFEROR NOTIFICATION OF SELECTION

SEC. 6.13 PROTEST

SEC. 6.14 APPLICATION OF PREFERENCES

SEC. 6.15 ALASKA BIDDER PREFERENCE

SEC. 6.16 ALASKA VETERAN PREFERENCE

SEC. 6.17 ALASKA MILITARY SKILLS PROGRAM PREFERENCE

SEC. 6.18 STANDARD CONTRACT PROVISIONS

SEC. 6.19 QUALIFIED OFFERORS

SEC. 6.20 PROPOSAL AS PART OF THE CONTRACT

SEC. 6.21 ADDITIONAL TERMS AND CONDITIONS

SEC. 6.22 HUMAN TRAFFICKING

SEC. 6.23 RIGHT OF REJECTION

SEC. 6.24 STATE NOT RESPONSIBLE FOR PREPARATION COSTS

SEC. 6.25 DISCLOSURE OF PROPOSAL CONTENTS

SEC. 6.26 ASSIGNMENT

SEC. 6.27 FORCE MAJEURE (IMPOSSIBILITY TO PERFORM)

SEC. 6.28 DISPUTES

SEC. 6.29 SEVERABILITY

SEC. 6.30 SUPPLEMENTAL TERMS AND CONDITIONS

SEC. 6.31 SOLICITATION ADVERTISING

SEC. 6.32 FEDERALLY IMPOSED TARIFFS

SECTION 7. ATTACHMENTS

SEC. 7.01 ATTACHMENTS

4 Rev. 8/24

SECTION 1. INTRODUCTION & INSTRUCTIONS

SEC. 1.01 PURPOSE OF THE RFP

The Department of Public Safety, Division of Alaska Wildlife Troopers, is soliciting proposals for a shipyard to build a large class patrol vessel, which will be utilized for law enforcement throughout

Alaskan waters.

SEC. 1.02 BUDGET

The state has already appropriated and identified $8,500,000.00 for this contract, any additional funds of a contract resulting from this RFP are contingent upon legislative appropriation.

SEC. 1.03 DEADLINE FOR RECEIPT OF PROPOSALS

Proposals must be received no later than 4:30 p.m. prevailing Alaska Standard Time on November 30, 2026, as indicated by postmark or email timestamp and late proposals will not be considered.

SEC. 1.04 PRIOR EXPERIENCE

In order for offers to be considered responsive offerors must meet these minimum prior experience requirements:

• Successfully manufactured a minimum of three steel hull vessels with an aluminum house of a minimum 75 feet

Offerors are required to provide a minimum of three examples of successful new vessel construction projects within the last 20 years to demonstrate experience. Priority will be given to projects that are similar to the desired vessel (as described above). Proof of prior experience must include [pictures, drawings, progress reports, etc.] and must be included with the offeror’s proposal in order to be considered responsive. An offeror's failure to meet these minimum prior experience requirements will cause their proposal to be considered non-responsive and rejected.

SEC. 1.05 REQUIRED REVIEW

Offerors should carefully review this solicitation for defects and questionable or objectionable material.

Comments concerning defects and questionable or objectionable material should be made in writing and received by the procurement officer at least ten days before the deadline for receipt of proposals. This will allow time for the issuance of any necessary amendments. It will also help prevent the opening of a defective proposal and exposure of offeror's proposals upon which award could not be made.

SEC. 1.06 QUESTIONS PRIOR TO DEADLINE FOR RECEIPT OF

PROPOSALS

All questions must be in writing and directed to the procurement officer. The interested party must confirm telephone conversations in writing.

Two types of questions generally arise. One may be answered by directing the questioner to a specific section of the RFP. These questions may be answered over the telephone. Other questions may be more complex and may require a written amendment to the RFP. The procurement officer will make that decision.

5 Rev. 8/24

PROCUREMENT OFFICER: Jason Monkelien – PHONE (907) 269-5582 – jason.monkelien@alaska.gov

SEC. 1.07 RETURN INSTRUCTIONS

Offerors must submit one copy of their proposal via email, the technical proposal and cost proposal must be saved as separate PDF documents and emailed to dps.das.solicitations@alaska.gov as separate, clearly labeled attachments, such as “Vendor A – Technical Proposal.pdf” and “Vendor A – Cost

Proposal.pdf” (Vendor A is the name of the offeror). The email must contain the RFP number in the subject line.

The maximum size of a single email (including all text and attachments) that can be received by the state is 20mb (megabytes). If the email containing the proposal exceeds this size, the proposal must be sent in multiple emails that are each less than 20 megabytes and each email must comply with the requirements described above.

Please note that email transmission is not instantaneous. Similar to sending a hard copy proposal, if you are emailing your proposal, the state recommends sending it with enough time to ensure the email is delivered by the deadline for receipt of proposals.

It is the offeror’s responsibility to contact the issuing agency at (907) 269-5582 to confirm that the proposal has been received. The state is not responsible for unreadable, corrupt, or missing attachments.

SEC. 1.08 ASSISTANCE TO OFFERORS WITH A DISABILITY

Offerors with a disability may receive accommodation regarding the means of communicating this RFP or participating in the procurement process. For more information, contact the procurement officer no later than ten days prior to the deadline for receipt of proposals.

SEC. 1.09 AMENDMENTS TO PROPOSALS

Amendments to or withdrawals of proposals will only be allowed if acceptable requests are received prior to the deadline that is set for receipt of proposals. No amendments or withdrawals will be accepted after the deadline unless they are in response to the state's request in accordance with 2 AAC 12.290.

SEC. 1.10 AMENDMENTS TO THE RFP

If an amendment is issued before the deadline for receipt of proposals, the amendment will be posted on the State of Alaska Online Public Notice (OPN) website. The link to the posting of the amendment will be provided to all who were notified of the RFP and to those who have registered with the procurement officer after receiving the RFP from the OPN.

After receipt of proposals, if there is a need for any substantial clarification or material change in the RFP, an amendment will be issued. The amendment will incorporate the clarification or change, and a new date and time established for new or amended proposals. Evaluations may be adjusted as a result of receiving new or amended proposals.

6 Rev. 8/24

SEC. 1.11 RFP SCHEDULE

RFP schedule set out herein represents the state’s best estimate of the schedule that will be followed. If a component of this schedule, such as the deadline for receipt of proposals, is delayed, the rest of the schedule may be shifted accordingly. All times are Alaska Standard Time.

ACTIVITY TIME DATE

Issue Date / RFP Released November 9, 2026

Pre-Proposal Conference 10:00 a.m. November 12, 2026

Deadline for Receipt of Proposals / Proposal Due Date 4:30 p.m. November 30, 2026

Proposal Evaluations Complete Week of December 7, 2026

Notice of Intent to Award December 11, 2026

Contract Issued December 22, 2026

This RFP does not, by itself, obligate the state. The state's obligation will commence when the contract is approved by the Commissioner of the Department of Public Safety, or the Commissioner's designee. Upon written notice to the contractor, the state may set a different starting date for the contract. The state will not be responsible for any work done by the contractor, even work done in good faith, if it occurs prior to the contract start date set by the state.

SEC. 1.12 PRE-PROPOSAL TELECONFERENCE

A pre-proposal teleconference will be held at 10:00 a.m., Alaska Standard Time, on October 29, 2026, via

MS Teams. The purpose of the teleconference is to discuss the work to be performed with the prospective offerors and allow them to ask questions concerning the RFP. All questions raised during the meeting must be submitted in writing to the Procurement Officer and will be posted along with the answers on the

Alaska Online Public Notice website as an Amendment to the RFP, as soon as possible after the meeting.

Offerors with a disability needing accommodation should contact the procurement officer prior to the date set for the pre-proposal conference so that reasonable accommodation can be made. Participants may request the Pre-Proposal Teleconference invite from the procurement officer or join with the following information:

MEETING ID: 281 351 771 742 574 1 Passcode: CA78j7NH

PHONE NUMBER: 1-907-202-7104,374172926# PHONE CONFERENCE ID: 374 172 926#

SEC. 1.13 ALTERNATE PROPOSALS

Offerors may only submit one proposal for evaluation. In accordance with 2 AAC 12.830 alternate proposals (proposals that offer something different than what is asked for) will be rejected.

SEC. 1.14 NEWS RELEASES

News releases related to this RFP will not be made without prior approval of the project director.

7 Rev. 8/24

SECTION 2. BACKGROUND INFORMATION

SEC. 2.01 BACKGROUND INFORMATION

Introduction:

The Alaska Department of Public Safety (DPS) is a full-service police and public safety entity which conducts traditional police duties, enforcement of fish and wildlife laws (sport and commercial), search and rescue operations, and other State of Alaska departmental support. Due to the vast size and generally roadless nature of the DPS area of responsibility, numerous unique conveyances are required to carry out required duties. These conveyances include hundreds of motor vehicles, numerous off-road vehicles of various types, approximately four dozen aircraft of varying capacity, and approximately 91 water borne vessels to include three “large class” vessels.

Pertinent Background Information:

The largest of the three, the Patrol Vessel (PV) Stimson, is a 156-foot converted commercial fishing vessel based out of Kodiak, Alaska. It provides the aforementioned services primarily in the Alaskan gulf coast waters of the Pacific Ocean and the Bering Sea. The second is the PC Cama’i, a 70-foot catamaran hull purpose-built vessel primarily utilized around Kodiak Island and portions of the Alaska

Peninsula. The third vessel, the PV Enforcer, came into service with the DPS in 2006, and was based in

Juneau, Alaska. Its primary duty in Southeast Alaska was to support multi-day commercial fishing and guided hunting enforcement, as well as sport fishing and hunting enforcement activities and investigations. The vessel also supported Search and Rescue operations, disaster response, and traditional police/public safety services. The Enforcer was a purpose-built steel construction single displacement hull vessel, 84 feet in length with a 27-foot beam. The vessel was plagued with major damage incidents during construction and suffered from significant design and engineering faults which required post-delivery alteration to successfully accomplish sea trials. Additionally, it was realized throughout its service life that dramatically inferior materials were utilized during its assembly. In 2023, after 17 years in service, DPS divested of the PV Enforcer, however, the need for like-vessel remains.

8 Rev. 8/24

SECTION 3. SCOPE OF WORK & CONTRACT INFORMATION

SEC. 3.01 SCOPE OF WORK

The Department of Public Safety, Alaska Wildlife Troopers, are soliciting for a shipyard to construct a new large class Patrol Vessel with sea-keeping abilities required for Alaskan waters. The vessel shall be built to the specifications identified in Attachment One: Technical Specifications and delivered to the

State free and clear of all liens, claims, encumbrances, and mortgages of any nature.

SEC. 3.02 CONTRACT TERM AND WORK SCHEDULE

The length of the contract will be from the date of award, approximately December 22, 2026, for two years until completion, approximately December 31, 2028. Any extension requests due to circumstances outside the offeror’s control must be submitted to the state 30 days prior to the end of the contract with a narrative explanation of the delay. Any extension approval is at the sole discretion of the State of Alaska.

Unless otherwise provided in this RFP, the State and the successful offeror/contractor agree: (1) that any extension of the contract excluding any exercised renewal options, will be considered as a month-to-month extension, and all other terms and conditions shall remain in full force and effect and (2) the procurement officer will provide notice to the contractor of the intent to cancel such month-to-month extension at least

30 days before the desired date of cancellation. A month-to-month extension may only be executed by the procurement officer via a written contract amendment.

SEC. 3.03 CONSTRUCTION SCHEDULE

Offeror shall, at its expense, provide a detailed construction schedule for the Vessel within 30 business days of the execution of an agreement resulting from this solicitation. The construction schedule shall be provided using a graphic format and project in detail the construction of the Vessel on at least monthly basis or as requested, identifying dates for specific work items and major areas and components, dates for the delivery of

State-furnished equipment to Offeror, and the names of all suppliers, vendors and subcontractors to be utilized, along with updated progress, labor and purchase summaries respecting the Vessel.

The construction schedule shall clearly identify the stage, milestone or percentage of progress to be completed with respect to each monthly Progress Payment amount as well as float within each such activity, month and the project’s critical path.

The construction schedule shall be considered fixed as to the dates for final tests/trials and Completion Date but shall be updated weekly by Offeror as described above, and to note the actual progress of construction which has occurred to that date.

No such update to the construction schedule shall change the date for tests/trials or the Completion Date, which may be changed only through a separate change order signed by both parties.

SEC. 3.04 ACCESS AND INSPECTION

State and its representative(s) shall have the right to inspect the Vessel during normal working hours, and at other times upon prior notification by State, provided that such inspection shall not unreasonably interfere with Offeror's work on the Vessel. State and its representatives shall be entitled to inspect the Vessel and all materials, parts, fabrications, gear and outfitting relating to the

Vessel.

9 Rev. 8/24

No such inspection by State and/or its representative, including any comments or recommendations, shall waive or decrease Offeror's responsibilities, warranties and obligations under this Agreement, or increase State's responsibilities under this Agreement, but State shall promptly notify Offeror of any defect, deficiency or deviation from this Agreement, including the Technical Specification, of which it becomes aware.

SEC. 3.05 DELIVERABLES

The contractor will be required to provide one completed vessel underway to a negotiated location, after meeting the specifications identified in Section 3.01 Scope of Work and Attachment One: Technical

Specifications, including passing all regulations and sea trials. Inter-port cost will be determined after delivery location is decided. The awarded contractor will charge back delivery cost to the state as a separate item on the State’s invoice. These charges must be billed as a pass-through charge.

SEC. 3.06 CONTRACT TYPE

This contract is a Firm Fixed Price contract.

SEC. 3.07 PROPOSED PAYMENT PROCEDURES

The state will make payments based on a negotiated payment schedule. Each billing must consist of an invoice and progress report. No payment will be made until the progress report and invoice has been approved by the project director.

SEC. 3.08 CONTRACT PAYMENT

No payment will be made until the contract is approved by the Commissioner of the Department of Public

Safety or the Commissioner's designee. Under no conditions will the state be liable for the payment of any interest charges associated with the cost of the contract. The state is not responsible for and will not pay local, state, or federal taxes. All costs associated with the contract must be stated in U.S. currency.

Payment for agreements under $500,000 for the undisputed purchase of goods or services provided to a state agency, will be made within 30 days of the receipt of a proper billing or the delivery of the goods or services to the location(s) specified in the agreement, whichever is later. A late payment is subject to 1.5% interest per month on the unpaid balance. Interest will not be paid if there is a dispute or if there is an agreement that establishes a lower interest rate or precludes the charging of interest.

Any single contract payment of $1 million or higher must be accepted by the contractor via Electronic

Funds Transfer (EFT).

SEC. 3.09 LOCATION OF WORK

The location of the work is to be performed, completed, and managed is at the offeror’s place of business.

The state will not provide workspace for the contractor. The contractor must provide its own workspace.

By signature on their proposal, the offeror certifies that all services provided under this contract by the contractor and all subcontractors shall be performed in the United States.

10 Rev. 8/24

If the offeror cannot certify that all work will be performed in the United States, the offeror must contact the procurement officer in writing to request a waiver at least 10 days prior to the deadline for receipt of proposals.

The request must include a detailed description of the portion of work that will be performed outside the

United States, where, by whom, and the reason the waiver is necessary.

Failure to comply with these requirements may cause the state to reject the proposal as non-responsive, or cancel the contract.

SEC. 3.10 ACQUISITION OF MATERIAL

• Source of Supply and Quality

Offeror is responsible for procuring, and delivering to the construction site, all materials, components, and equipment necessary to construct and complete the Vessel, except for those items which are specifically identified as State-furnished equipment in the “Material List” of the Contract

Documents, which items shall be separately provided by State. All equipment, materials, and articles incorporated in the Vessel are to be new, of current production, of the specified or most suitable grade of their respective kinds for the purpose. Upon request, Offeror shall furnish to State with the name of the manufacturer of machinery, mechanical and other equipment which Offeror contemplates incorporating in the work, together with their performance capacities and other pertinent information.

State shall acquire title to all materials, components, machinery, parts, gear, and outfitting purchased for and/or relating to the construction of the vessel. Notwithstanding that the State shall acquire title as set forth above, however, all risk of loss/damage to and duty to insure such items and the Vessel shall remain solely with the Offeror until the Vessel has been delivered to and accepted by the State, as set forth in this agreement.

• Purchase Order Approval

Any Offeror furnished materials that are not specifically noted in Attachment One – Technical

Specifications shall be subject to the following. In these instances, Offeror shall work with the vendor to obtain detailed specifications, drawings (if applicable) and a cost of each item. Then this information shall be sent to State for review and approval, as to compliance with the applicable

Contract Documents, prior to Offeror agreeing to purchase the item. This information shall be supplied to State sufficiently in advance of any fabrication and/or shipment deadline so as to not cause any delay. No such review and/or approval by State shall increase any responsibility of State o decrease any responsibility of Offeror under this Agreement.

• State Furnished Equipment

The State-furnished equipment is called out in the “Material List” of the Contract Documents.

Offeror shall at its expense assemble, properly install, incorporate and make operational all State-furnished equipment. State will not approve Change Orders for installation issues regarding State-furnished equipment unless the Offeror can clearly document such equipment is substantially different than specified in the Contract Documents or is clearly deficient or broken.

11 Rev. 8/24

State-furnished equipment will be delivered to Offeror in time for orderly installation and incorporation into the Vessel. Within fifteen days after the execution of an agreement resulting from this solicitation, Offeror shall provide State with a schedule of reasonable dates by which Offeror will require delivery of State-furnished equipment and shall keep State advised well in advance of any change in these dates.

State-furnished equipment will be delivered or made available to Offeror at the shipyard where the

Vessel is being constructed. Offeror shall receive, transport, inspect for transit damage, check for agreement with bills of lading, insure, protect during construction, provide secure storage for, and install aboard the Vessel, any State-furnished equipment. An inventory of State-furnished equipment, as received by the Offeror, shall be provided weekly to State. The cost of handling and placing all State-furnished equipment and materials after they are delivered to Offeror shall be for

Offeror’s account and considered part of the Purchase Price.

State-furnished equipment shall be temporarily stored in Offeror's warehouse until time of installation. All material and equipment shall be handled and stored in such a manner as to prevent damage from careless handling, exposure to elements, or any other cause.

Offeror shall be held responsible for all State-furnished equipment delivered to Offeror. State may reject, for use on the Vessel, any State-furnished equipment which is damaged, improperly stored or handled by Offeror. State-furnished equipment or material which is damaged through improper storage or handling, or any shortages of deficiencies in State-furnished equipment or materials, shall be properly remedied and/or replaced with new materials at Offeror’s risk and expense.

• Or-Equal Substitution

Offeror may submit written requests for substitution of materials to State for approval. Written requests for substitution of materials shall be submitted three weeks in advance of proposed order date. The request shall include all relevant data establishing equality or superiority of the substitute as it relates to the following:

A. Performance, size, weight and durability characteristics;

B. Requisite regulatory body approvals;

C. Availability of parts and service in Alaska or the Pacific Northwest;

D. Service history/records of the proposed item;

E. Names of firms which have the item in similar service;

F. An analysis of the effect on vessel weight, center of gravity and stability; and

G. Other salient technical data germane to a comparative analysis.

Offeror shall provide a statement in the request for substitution that no increase in the Purchase Price and/or delays will be incurred as a result of the substitution. Written quotes from the “specified” and proposed “or equal” vendors shall be provided. In the case where the proposed “or equal” results in a cost savings, such savings shall be cited in the request for substitution and credited to

State if the request is approved, with a Change Order to be executed by the parties confirming the same.

12 Rev. 8/24

State will provide a written determination regarding the request for use of the "or equal" item.

State’s determination shall be considered final. Rejection of the Offeror’s proposed “or equal” will not be grounds for any additional cost, time or schedule delay or schedule impact.

For use of an "or equal" item to be considered approved, it must have unambiguous written approval of State. It shall be Offeror’s responsibility to design, integrate, test and incorporate the “or equal” item in the work. All costs incurred as a result of the substitution shall be at Offeror’s expense unless otherwise agreed pursuant to a Change Order executed by both parties. Any dispute regarding a substitution shall be immediately resolved pursuant to Section 28, below.

• Asbestos, Lead, and other Hazardous Materials

Under no circumstances shall Offeror purchase or install hazardous materials in the Vessel. These materials may include (but are not limited to): asbestos containing material (ACM), paint containing heavy metals such as zinc chromate and lead (HMCP), and coal tar epoxies. Offeror shall be solely responsible for and indemnify State of and from (including legal fees and litigation costs) all loss, damage, expense, fine, penalties and liability, (including but not limited to those respecting remediation, disposal, health testing of personnel, etc.) due to hazardous materials found incorporated/installed in the Vessel.

SEC. 3.11 PROTECTION OF PERSONNEL, VESSEL, AND MATERIALS

• Safety and Security

Offeror shall provide and maintain adequate security throughout the period of construction and continuing through delivery and final acceptance of the Vessel.

Offeror shall submit for approval and explain their Safety and Security Plan to State during the first meeting and before on-site work begins. Plan shall include procedures for protecting the Vessel from fire risk, protecting Vessel materials and equipment from theft, and providing a safe working environment for all personnel. The same shall be provided for State-furnished equipment.

The name(s) and telephone number(s) of Offeror’s safety representative(s) and emergency contacts such as ambulance, physician, hospital, fire department, and police shall be provided to State and posted, in writing, at appropriate locations at the work site prior to commencing any work.

Offeror shall keep the openings of the Vessel closed against the weather, as appropriate, to protect installed equipment. Offeror shall keep installed pipelines (and other components like: pumps, traps and tanks) drained and temporarily plugged to maintain cleanliness and avoid damaging piping or fixtures by corrosion or freezing.

Any damage caused through Offeror’s neglect or failure to comply with these requirements shall be promptly repaired or replaced at Offeror’s expense as required hereunder, to the satisfaction of State.

In addition, Offeror shall provide State with a copy of its COVID-19 community and workforce protection/mitigation plan upon execution of this Agreement, and updates thereafter as such may be developed.

13 Rev. 8/24

• Welding, Hotwork, and Gas-Freeing

Offeror shall ensure that all spaces and areas requiring hotwork or personnel entry are safe for hotwork and/or entry in accordance with shipyard procedures and applicable regulations. In conjunction with this responsibility, Offeror shall obtain and maintain the gas-free certifications for the affected spaces and areas and post the necessary hazard warnings and “Safe for Hotwork” and

“Safe for Entry” signage at entrances to the tanks, voids and other work areas. Copies of gas-free certificates shall be provided to State.

• Hull Protection

Rigid control of welding and grounding shall be maintained for the protection of the hull, its systems and appendages. Control shall be maintained during the entire time the Vessel is in the custody of Offeror, whether waterborne or on land.

To ensure proper protection of the Vessel, the following minimum requirements shall be adhered to:

A. Any welding power source used on the Vessel shall not be used for any other vessel or structure.

B. Ground (return) cables attached to the Vessel shall not be grounded to any other vessel or structure.

C. All welding cables, electrodes and grounds shall be completely insulated and rigged in such a manner as to preclude any contact with water.

D. Grounding lugs shall be tightly secured to grounding plates and contact surfaces shall be thoroughly cleaned to base metal.

E. When the Vessel is waterborne any welding operations must be performed with the welding equipment located on board the Vessel. Shore based units are not to be used with the Vessel waterborne.

• Launching and Hauling

Offeror shall be responsible for the safe launching, hauling, lifting, and movement of the Vessel. In the case of launching, hauling, and movement across land, Offeror shall provide a plan of action to State for approval prior to the event, stating specifically the equipment to be used, loads placed on the Vessel, allowable equipment loads, and factors of safety.

In the case of lifting or moving the Vessel by a device not solely designed and dedicated to the lifting of marine vessels (like a crane or railroad), Offeror shall provide a suitable plan of action, stating specifically the equipment to be used, loads placed on the Vessel, allowable equipment loads, and factors of safety, stamped by a professional engineer.

This plan shall also include the rating and condition of all specific lifting and rigging gear and moving components, a calculation of stress in the Vessel’s hull and structure, and a drawing showing the location of lifting gear in relation to the Vessel’s hull and structure.

Failure to provide adequate and timely lifting/moving plans, information, calculations, and drawings shall be considered a default and breach under this Agreement.

• Material Protection

14 Rev. 8/24

Offeror shall be responsible for the protection, during the work and up through final delivery to acceptance of the Vessel by State, of all material and equipment intended for use and installed aboard the Vessel. Once State-furnished equipment and materials are delivered to Offeror, proper storage and handling is the responsibility of Offeror.

Due consideration shall be given to the nature of the item during handling, storage, and protection.

Materials shall be stored in accordance with manufacturer's instructions, including any specified temperature and humidity constraints. Products stored in an exterior location shall be placed on blocking or skids to prevent soiling or staining.

Offeror shall cover products subject to damage or deterioration with impervious sheet coverings; provide adequate ventilation to avoid condensation.

All materials shall be protected from theft. Loss of materials from theft shall be Offeror’s responsibility.

The storage of long lead time items, such as main engines and generators, shall be specially addressed by Offeror to the satisfaction of State. Ideally, these items should remain at the vendor’s heated warehouse until they are needed at Offeror’s facility.

Installed materials shall be protected as necessary from damage resulting from natural elements, traffic, and subsequent construction. All materials, equipment, deck surfaces, bulkhead mounted items, carpeting/tile, and all painted surfaces shall be specifically protected from welding and cutting, movement of workers through the space, and painting through the use of suitable blankets, hardboard, or thick plastic coatings. Protective measures shall be established by Offeror and provided to State in advance.

SEC. 3.12 SUBCONTRACTORS

Subcontractors may be used to perform work under this contract. If an offeror intends to use subcontractors, the offeror must identify in the proposal the names of the subcontractors and the portions of the work the subcontractors will perform.

Subcontractor experience shall not be considered in determining whether the offeror meets the requirements set forth in Sec. 1.04 Prior Experience.

If a proposal with subcontractors is selected, the offeror must provide the following information concerning each prospective subcontractor within five working days from the date of the state's request:

• complete name of the subcontractor;

• complete address of the subcontractor;

• type of work the subcontractor will be performing;

• percentage of work the subcontractor will be providing;

• evidence that the subcontractor holds a valid Alaska business license;

15 Rev. 8/24

If a subcontractor on the list did not have a valid Alaska business license prior to award and it is required, the Offeror may not use the subcontractor in the performance of the contract and shall replace the subcontractor with a subcontractor who had a valid Alaska business license at the close of the RFP. Note that if the subcontractor will not be performing work within Alaska, they will not be required to hold an Alaska business license.

• a written statement, signed by each proposed subcontractor that clearly verifies that the subcontractor is committed to render the services required by the contract.

An offeror's failure to provide this information, within the time set, may cause the state to consider their proposal non-responsive and reject it. The substitution of one subcontractor for another may be made only at the discretion and prior written approval of the project director.

SEC. 3.13 JOINT VENTURES

Joint ventures will not be allowed.

SEC. 3.14 RIGHT TO INSPECT PLACE OF BUSINESS

At reasonable times, the state may inspect those areas of the contractor's place of business that are related to the performance of a contract. If the state makes such an inspection, the contractor must provide reasonable assistance.

SEC. 3.15 CONTRACT PERSONNEL

Any change of the project team members or subcontractors named in the proposal must be approved, in advance and in writing, by the project director or procurement officer. Changes that are not approved by the state may be grounds for the state to terminate the contract.

SEC. 3.16 INSPECTION & MODIFICATION - REIMBURSEMENT FOR

UNACCEPTABLE DELIVERABLES

The contractor is responsible for the completion of all work set out in the contract. All work is subject to inspection, evaluation, and approval by the project director. The state may employ all reasonable means to ensure that the work is progressing and being performed in compliance with the contract. The project director or procurement officer may instruct the contractor to make corrections or modifications if needed in order to accomplish the contract’s intent. The contractor will not unreasonably withhold such changes.

Substantial failure of the contractor to perform the contract may cause the state to terminate the contract.

In this event, the state may require the contractor to reimburse monies paid (based on the identified portion of unacceptable work received) and may seek associated damages.

SEC. 3.17 CONTRACT CHANGES - UNANTICIPATED AMENDMENTS

During the course of this contract, the contractor may be required to perform additional work. That work will be within the general scope of the initial contract. When additional work is required, the project director will provide the contractor a written description of the additional work and request the contractor to submit a firm time schedule for accomplishing the additional work and a firm price for the additional work. Cost and pricing data must be provided to justify the cost of such amendments per AS 36.30.400.

16 Rev. 8/24

The contractor will not commence additional work until the procurement officer has secured any required state approvals necessary for the amendment and issued a written contract amendment, approved by the

Commissioner of the Department of Public Safety or the Commissioner's designee.

SEC. 3.18 NONDISCLOSURE AND CONFIDENTIALITY

Contractor agrees that all confidential information shall be used only for purposes of providing the deliverables and performing the services specified herein and shall not disseminate or allow dissemination of confidential information except as provided for in this section. The contractor shall hold as confidential and will use reasonable care (including both facility physical security and electronic security) to prevent unauthorized access by, storage, disclosure, publication, dissemination to and/or use by third parties of, the confidential information. “Reasonable care” means compliance by the contractor with all applicable federal and state law, including the Social Security Act and HIPAA. The contractor must promptly notify the state in writing if it becomes aware of any storage, disclosure, loss, unauthorized access to or use of the confidential information.

Confidential information, as used herein, means any data, files, software, information or materials

(whether prepared by the state or its agents or advisors) in oral, electronic, tangible or intangible form and however stored, compiled or memorialized that is classified confidential as defined by State of Alaska classification and categorization guidelines provided by the state to the contractor or a contractor agent or otherwise made available to the contractor or a contractor agent in connection with this contract, or acquired, obtained or learned by the contractor or a contractor agent in the performance of this contract.

Examples of confidential information include, but are not limited to: technology infrastructure, architecture, financial data, trade secrets, equipment specifications, user lists, passwords, research data, and technology data (infrastructure, architecture, operating systems, security tools, IP addresses, etc).

If confidential information is requested to be disclosed by the contractor pursuant to a request received by a third party and such disclosure of the confidential information is required under applicable state or federal law, regulation, governmental or regulatory authority, the contractor may disclose the confidential information after providing the state with written notice of the requested disclosure ( to the extent such notice to the state is permitted by applicable law) and giving the state opportunity to review the request.

If the contractor receives no objection from the state, it may release the confidential information within

30 days. Notice of the requested disclosure of confidential information by the contractor must be provided to the state within a reasonable time after the contractor’s receipt of notice of the requested disclosure and, upon request of the state, shall seek to obtain legal protection from the release of the confidential information.

The following information shall not be considered confidential information: information previously known to be public information when received from the other party; information freely available to the general public; information which now is or hereafter becomes publicly known by other than a breach of confidentiality hereof; or information which is disclosed by a party pursuant to subpoena or other legal process and which as a result becomes lawfully obtainable by the general public.

SEC. 3.19 REGULATORY REQUIREMENTS

Offeror is responsible for constructing and delivering the Vessel in conformity with all applicable regulatory and classification requirements including without limitation those identified in the

17 Rev. 8/24

Contract Documents. Offeror is cautioned that the Contract Documents (specification and drawings) do not repeat or call out specific regulatory requirements. It is Offeror’s responsibility to follow the Contract Documents and be knowledgeable of applicable regulatory rules and requirements.

The cost and expense of regulatory approvals during the course of construction shall be for the account of Offeror and deemed included in the Total Price. In general, correspondence with regulatory agencies and/or classification societies should be conducted by State, or by Offeror after specific advance State approval. State must be promptly notified and provided with copies of all regulatory correspondence, including as to any verbal discussions with inspectors, the Coast Guard and/or Class Society. Letters or emails from regulatory agencies and/or Class Society must be immediately sent to State.

Any change in regulatory, classification or other requirements applicable to the Vessel, occurring or promulgated after the execution of this Agreement but before State accepts delivery of the Vessel, shall be promptly addressed by Offeror and State and if necessary, a revised scope of work will be established and a Change Order will be executed by the parties confirming the same.

SEC. 3.20 INDEMNIFICATION

The contractor shall indemnify, hold harmless, and defend the contracting agency from and against any claim of, or liability for error, omission, or negligent act of the contractor under this agreement. The contractor shall not be required to indemnify the contracting agency for a claim of, or liability for, the independent negligence of the contracting agency. If there is a claim of, or liability for, the joint negligent error or omission of the contractor and the independent negligence of the contracting agency, the indemnification and hold harmless obligation shall be apportioned on a comparative fault basis.

“Contractor” and “contracting agency”, as used within this and the following article, include the employees, agents and other contractors who are directly responsible, respectively, to each. The term

“independent negligence” is negligence other than in the contracting agency’s selection, administration, monitoring, or controlling of the contractor and in approving or accepting the contractor’s work.

SEC. 3.21 INSURANCE REQUIREMENTS

3.22.1 General Requirements: The provisions of this Subsection apply to all insurance coverages that

Contractor must procure and maintain under the Contract.

(a) Contractor must procure and maintain all insurance identified in this Subsection from insurance companies that are duly licensed and authorized to issue insurance policies for the required limits and coverages in the state(s) where the project is located.

(b) All insurance policies, including insuring forms and underwriting security, that

Contractor intends to furnish to satisfy the requirements of this Contract are subject to the

Department’s prior review and approval.

(c) Within 15 days of the Notice of Intent to Award, Contractor must deliver to the

Department, with copies to each named insured and additional insured (as identified in this Section or elsewhere in the Contract), certificates of insurance establishing that Contractor has obtained

18 Rev. 8/24 and is maintaining the policies, coverages, and endorsements required by the Contract. The certificate must include the following language:

This statement certifies that the policies identified herein comply with all aspects of the insurance requirements of RFP 2027-1200-0113 Large Class Patrol Vessel Build. The insurance carrier agrees that it will notify the Alaska Department of Transportation &

Public Facilities, in writing, at least 30 days before cancellation of any coverage or reduction in any limits of liability.

(d) Upon request by the Department or any other named insured, Contractor shall furnish other evidence of such required insurance, including copies of policies and endorsements, and documentation of applicable self-insured retentions and deductibles. Contractor may redact any confidential premium or pricing information contained in any policy or endorsement furnished under this provision.

(e) The Department’s failure, if any, to demand such certificates or other evidence of

Contractor’s full compliance with these insurance requirements or to identify a deficiency in

Contractor’s compliance does not constitute a waiver of Contractor’s obligation to procure and maintain such insurance.

(f) If Contractor does not procure or maintain all of the insurance required by the Contract, it shall immediately notify the Department in writing of: (i) a failure to purchase before the start of the Work and (ii) a pending failure to maintain prior to any change in the required coverage.

(g) If Contractor fails to procure or maintain required insurance, or if it fails to provide substitute insurance if an insurance carrier becomes insolvent, is placed in receivership, declares bankruptcy, or cancels a policy, then the Department may, at its election, withhold payment to

Contractor until Contractor cures the issue or exercise the Department’s termination rights under

Section 13 of the General Conditions for Vessel Construction.

(h) Without prejudice to any other right or remedy, if Contractor has failed to obtain required insurance, the Department may elect to obtain equivalent insurance to protect its interests at the expense of Contractor and apply a set-off to any monies owed Contractor.

(i) The Department does not represent that insurance coverage and limits established in this

Contract will be adequate to protect Contractor or Contractor’s interests.

(j) The insurance and insurance limits required herein are not a limitation on Contractor’s liability to the Department and other individuals and entities in the Contract.

3.22.2 Workers’ Compensation: Contractor shall procure and maintain workers’ compensation insurance affording coverage for all its employees engaged in the Work as required by Alaska law or equivalent state law in which the Vessel construction is located. Contractor is responsible for workers’ compensation insurance for Subcontractors that provide services under this Contract. The coverage shall include:

(a) A United States Longshore and Harbor Workers’ Act endorsement, and a Maritime Employer’s

Liability (Jones Act) endorsement with a minimum limit of $10,000,000 if the Work involves activity on or about navigable waters; and

19 Rev. 8/24

(b) A waiver of subrogation against the Department with regard to all workers’ compensation claims.

3.22.3 Marine/Commercial General Liability Insurance: Contractor shall procure and maintain Marine

General Liability insurance with coverage of not less than $25,000,000 per occurrence, to include premises and operations, independent contractors, products/completed operations, and contractual obligations, including the duty to defend, indemnify, and hold harmless obligation set forth in the

Contract Documents. This policy must include the following coverages/provisions:

(a) Wharfinger’s Liability;

(b) Stevedore’s Liability;

(c) Ship Repairer’s Liability;

(d) Watercraft exclusion deleted; and

(e) Standard ISO contractual liability.

3.22.4 Automobile liability: Contractor shall procure and maintain automobile liability insurance against claims for damages because of bodily injury or death of any person or property damage arising out of the ownership, maintenance, or use of any motor vehicle that Contractor uses in the performance of services under the Contract. The automobile liability policy must have combined single limits of not less than $10,000,000 per occurrence.

3.22.5 Pollution liability insurance: Contractor shall procure and maintain a policy covering third-party injury and property damage claims, including clean-up costs, as a result of pollution conditions arising from Contractor’s operations and completed operations. The policy must provide coverage of not less than $25,000,000 per occurrence.

3.22.6 Additional insureds: Contractor’s marine/commercial general liability, automobile liability, and pollution liability policies must include and list as additional insureds State of Alaska, Department of

Transportation; include coverage for the Department’s officials, employees, agents, consultants, and subcontractors and of any additional insureds; and the insurance afforded to these additional insureds must provide primary coverage for all claims covered…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .