JPL_attachment_2_required_information.pdf

PDF 251 KB Posted

Attached to
JPL Surface Biology and Geology (SBG) Designated Observable Study Team Request for Information (RFI)
Solicitation number
RFI-WH-2671-060419
Issued by

About this file

JPL Attachment 2 - Required Information

View the file

Other files

File Type Posted
JPL_attachment_1_table_1_and_table_2.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Attachment 2 – Required Information

RFI #: WH-2671-060419 for Science Biology and Geology Designated Observable Study

REQUIRED INFORMATION

Please provide the following information below:

1. Organization information: Organization name and address, point-of-contact name, E-mail address, phone number.

2. Abstract: Provide a brief summary of the system concept or participatory engagement approach.

3. System concept: Describe the architecture concept or measurement capability and functions, how it addresses the objectives and requirements in this RFI, and its maturity

(Technology Readiness Level) both at present and projected with maturation plan at the time of implementation (if for a future capability).

4. Development approach: Outline the approach and timeline for developing and testing the system concept.

5. Performance Capability: Refer back to capability table.

6. Calibration: Describe the methods used or planned for providing calibrated data (i.e., how is data quality maintained), and validating that the data meet specifications.

7. Technology Evolution or Infusion: Describe the aspects of the system concept that will evolve over the lifetime of the program and how that technology will be infused in the described mission architecture.

8. System Cost Estimate: Provide a rough order-of-magnitude (ROM) estimate of the cost to build the system concept with accompanying assumptions and rationale (for reference purposes only). For instrument capabilities, if no ROM is provided to the SBG architecture team intends to run NASA’s Instrument Cost Model (NICM). Respondents are asked to provide enough information to allow runs of NICM at the system (or subsystem) level: total instrument mass, subsystem masses (if known), power needs, instantaneous data rates, telescope dimensions and type, passive or active cooling, focal plane operating temperature, detector type and

RESPONSE: HOW TO SUBMIT

Architecture Concept Responses are limited to no more than five (5) pages. The subject line of the submission should be "RFI for Science Biology and Geology Designated Observable

Study" and attachments should be in PDF format. Files should not be greater than 8MB in size. The information is requested for planning purposes only, subject to FAR Clause 52.215-3, entitled "Solicitation for Information for Planning Purposes." Only material suitable for full and open distribution shall be submitted and submittals shall be considered approved by the providing organization to be suitable for full and open distribution. No proprietary, export controlled, classified, or sensitive material should be provided in either abstracts or presentations.

DISCLAIMER

The requested information is for preliminary planning purposes only and does not constitute a commitment, implied or otherwise, that JPL will solicit you for such a procurement in the future.

Neither JPL nor the Government will be responsible for any costs incurred by you in the furnishing of this information. Prospective subcontractors are advised that any information provided shall be deemed to be furnished with unlimited rights to JPL, with JPL assuming no liability for the disclosure, use, or reproduction of such data.

This RFI is open to all types of organizations, including U.S. industry, universities, nonprofit organizations, NASA Centers, Federally Funded Research and Development Centers, other U.

S. Government agencies, and international organizations.

File details come from the government source that posted it.