RFD Flare and Beading.pdf
PDF 291 KB Posted
- Attached to
- RFI for Flare and Beading Machine
- Solicitation number
- 47QSCA26RFI0001
- Issued by
- Not on record
About this file
This document is a specifications sheet for a Flaring and Beading Machine (Part #3CPV) required by the United States Air Force at Robins Air Force Base, Georgia.
The machine must be floor-mounted with pneumatically operated jaws and capable of performing squaring, deburring, flaring, and beading operations on tubing ranging from 0.125 to 3 inches outer diameter. Key technical specifications include a variable spindle speed of 300 to 1750 RPM, a 3 horsepower motor, air cylinder clamping requiring 75-100 PSI air supply, and a cabinet stand with tooling shelf. The machine must accommodate existing facility power of 220/600 volts, 3-phase, 50/60 Hz. Vendors must provide two hard copies and one electronic copy of technical data to Bob Diamond, Equipment Specialist, at 235 Byron Street, Building 300, Suite 19A, Robins AFB, GA. A known source identified is PHI Hydraulics, Model 3CPV. The solicitation notes this will be an open competitive procurement with source selection determined after vendor quotes and technical acceptability review. The Air Force explicitly excludes installation, training, tooling, and any additional options not part of the standard equipment package from contract scope.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Flaring and Beading Tooling Package-3CPV -List of Items.pdf | ||
| RFI Flaring and Beading.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Item Noun: Flaring and Beading Machine
Specifications/Technical Characteristics:
• Floor mounted
• Pneumatically operated jaws
• Squaring and deburring 0.125 to 3 in OD
• Flaring 025 to 3 in OD x 0.125 wt
• Beading 0.25 to 0.375 in OD for 0.035 wt
• Beading 0.5 to 1.5 in OD for 0.065 wt
• Variable spindle speed 300 to 1750RPM
• Motor 3 HP
• Air cylinder clamping
• Air supply 75-100 PSI required
• Includes cabinet stand with tooling shelf
• Power :
• Additional features/tooling __________
• Two (2) hard copies and one (1) electronic copy of technical data shall be provided with the machine.
• Shipping address for electronic technical data packages is:
Attn: Bob Diamond, Equip. Specialist 235 Byron Street, (Bldg. 300) Suite 19A
Robins AFB, GA 31098-1813If not specified within the characteristics of the NSN, please provide the following information:
• The existing source power available at the facility is o Volt: __ __220/600____ o Phase: __3____ __ o Frequency: ____50/60_____ Hertz (Hz)
• The machine must fit through a doorway with the following dimensions:
o Width: ________ o Height: _________
• Available floor space for equipment width by length to include required operator workspace and OSHA required access clearances to service panels.
Part #3CPV o Width: _________ o Length: ________
• If available, a known source for the equipment is ___PHI Hydraulics, 3CPV__________
Note 1: This will be an open competitive competition and the source of supply will not be determined until the vendor quotes and technical acceptability is reviewed by the contracting agency.
Note 2: We the USAF do not include installation, training, tooling or any additional options that are not part of the standard package in the above characteristics data.
o
| 3441005288680_FE612291560030.pdf |
| 3441005288680_FE652030180047.pdf |
| 3441005288680_FE638182050105.pdf |
| 3441005288680_FE642341560035.pdf |
| 3441005288680_FE452820390006.pdf |
File details come from the government source that posted it. Updated .