Specification Drawings for Inmate Transport Buses

This document consists of technical specification drawings prepared by the County of Sacramento Fleet Services Division for two Type D inmate transport buses (Specifications 159-111 and 159-112). The drawings provide detailed dimensional floor plans, equipment layouts, and workstation configurations required for the buses' interior design. Drawing 1 contains a dimensional floor plan showing overall bus dimensions of 480.0 inches in length with various compartment widths and depths precisely measured. Drawing 2 illustrates the camera location and direction, emergency lighting layout, scene lighting locations, lexan sheeting locations, camera system monitors, and rifle mount positions throughout the vehicle. Drawing 3 depicts the work station configuration including a document holder with hinged lid and spring clip (3 inches deep), open-top storage with soft lining, an open work surface flat top, and specifications for two 12 VDC units and two USB ports with HELLA map light locations. The specifications establish the architectural requirements for accommodating 39 inmates, 2 deputies, and 1 driver within secure partitioned cells and divided isolation areas.

These drawings are integral to the County of Sacramento Sheriff's Office's procurement of two new rear-engine, diesel-powered Type D buses with a minimum 36,200-pound Gross Vehicle Weight Rating. The specifications mandate strict adherence to the dimensional and layout requirements illustrated across all three drawings to ensure proper security infrastructure, visibility through camera systems, adequate lighting for inmate transport operations, and functional work stations for deputy supervision. Bidders responding to this request for bids must design and build buses that precisely conform to these technical specifications, with questions due by March 17, 2026, and final bids due by March 27, 2026. The County anticipates contract award on April 16, 2026, with a one-year manufacturer's warranty and commitment to maintain parts and labor support within the Sacramento area.