RFB 11 INSTR.dat

Iowa Prison Industries

Form: RFBSUB10-07-09

REQUEST FOR BID SUBMISSION DOCUMENT

RFB Cover Sheet

Administrative Information:

IOWA PRISON INDUSTRIES

406 North High Street

Anamosa, IA 52205

Purchasing Agent: RUTHANNE MOSSER

Name: Iowa Prison Industries

Mailing Address: Office of Purchasing

406 North High Street

Anamosa, IA 52205

Phone: 319-462-3706

Email: ruthanne.mosser@iowa.gov

FAX: 319-462-2158

Bids must be emailed to: iowaprisonindbids@iowa.gov

Firm Bid Terms Minimum Number of Days following the deadline for submitting bids that the Contractor guarantees all bid terms, including price, will remain firm:

minimum # of days:

Section 1 Introduction & Administrative Information

1.1 Purpose

The purpose of this Request for Bid is to solicit bids from qualified providers to provide the goods and/or services identified on the RFB cover sheet and in the attached specification and delivery instructions. Any contract(s) resulting from the RFB shall not be an exclusive contract.

1.2 Instructions to Bidder

All submission requirements for this Request for Bid will be identified within this Request for Bid Submission Document.

1.3 Procurement Timetable The dates provided in the procurement timetable on the RFB cover sheet are provided for informational and planning purposes; however, Iowa State (Prison) Industries reserves the right to change the dates. If Iowa State (Prison) Industries changes any of the deadlines for Vendor submissions, Iowa State (Prison) Industries will issue Addenda to the RFB. Bidders are advised to check the IPI website for such addenda postings.

1.4 Submission of Bids Iowa State (Prison) Industries must receive the Bid emailed to iowaprisonindbids@iowa.gov Contractors must furnish all information necessary to evaluate the Bid. Bid that fail to meet the mandatory requirements of the RFB may be disqualified. Verbal information provided by the Contractor shall not be considered part of the Contractor's Bid unless it is reduced to writing.

If a Contractor proposes more than one method of meeting these requirements, each shall be labeled and submitted separately. Each will be evaluated separately.

The costs of preparation and delivery of the Bid are solely the responsibility of the contractor.

All bids shall become the property of ISI and shall not be returned.

1.5 Bid Opening

Iowa State (Prison) Industries will open Bids after the deadline for submission of Bids has passed. The Bids will remain confidential until the Evaluation Committee has reviewed all of the Bids submitted in response to this RFB and Iowa State (Prison) Industries has announced a notice of intent to award a contract. See Iowa Code Section 72.3. The names of Contractors who submitted timely Bids will be publicly available after the Bid opening. The announcement of Contractors who timely submitted Bids does not mean that an individual Bid has been deemed technically compliant or accepted for evaluation.

1.6 Rejection of Bids Iowa State (Prison) Industries reserves the right to reject any or all Bids, in whole and in part, received in response to this RFB at any time prior to the execution of a written contract. Issuance of this RFB in no way constitutes a commitment by Iowa State (Prison) Industries to award a contract.

1.7 Acceptance of Terms and Conditions

The Contractor shall specifically agree that the Bid is predicated upon the acceptance of all terms and conditions stated in the RFB. If the Contractor objects to any term or condition, the Contractor must specifically refer to the RFB page, and section. Objections or responses that materially alter the RFB may be deemed non-responsive and disqualify the Contractor.

1.8 Certification Letter

The Contractor shall sign and submit with the Bid the document included as Attachment #1 (Certification Letter) in which the Contractor shall make the certifications included in Attachment #1.

1.9 Authorization to Release Information

The Contractor shall sign and submit with the Bid the document included as Attachment #2 (Authorization to Release Information Letter) in which the Contractor authorizes the release of information to Iowa State (Prison) Industries. ` 1.10 Firm Bid Terms

By submitting a response to this RFB the Contractor guarantees the availability of the goods and/or services offered and that all Bid terms, including price, will remain firm a minimum of 60 days following the deadline for submitting Bids.

SECTION 2

SPECIFICATIONS AND TECHNICAL REQUIREMENTS

2.1 Specifications

ALUMINUM SPECIFICATIONS LISTED AS A SEPARATE DOCUMENT

2.2 Overview

The successful Contractor shall provide the goods and/or services to Iowa State (Prison) Industries and to Buyers issuing Purchase Instruments against the Resulting Contract in accordance with the technical specifications defined on the specification/technical data sheet or on the RFB Price Sheet included in this bid package. Bids must identify any deviations from the requirements of this RFB or requirements the Contractor cannot satisfy. Any deviations from the requirements of Section 2 or any requirement of other Sections that the Contractor cannot satisfy may disqualify the Contractor.

There are two types of requirements addressed in these specifications:

· Mandatory Requirements: A successful Contractor must be able to satisfy all these requirements to be deemed a Responsible Contractor.

· Scored Technical Requirements: Bids which pass the Mandatory Requirements review will be reviewed by the evaluation committee and scored in accordance with the evaluation criteria. Compliance with the Scored Technical Requirements is also mandatory.

The successful Contractor shall be obligated to provide all goods and/or services specified in this Section.

2.3 Mandatory Requirements:

1.

RFB must be emailed to iowaprisonindbids@iowa.gov on or before the due date stated.

2.

Price Sheet(s) must be fully completed and signed.

3.

Certification Letter (Attachment #1) must be completed and signed.

4.

Authorization to Release Information Letter (Attachment #2) must be completed and signed.

Compliance with Scored Technical Requirements.

2.4 Scored Technical Requirements

All items listed below are mandatory Scored Technical Requirements. They will be evaluated and scored by the evaluation committee. All requirements must be met and there will be a minimum score required for Contractors to be deemed responsive and responsible.

1.

Quality

2.

Delivery

Price

4.

Payment Terms Attachment # 1 Certification Letter

[Date]

Ruthanne Mosser, Purchasing Agent Iowa State (Prison) Industries 406 North High Street

PO Box 430

Re:

Request for Bid Number 911

BID CERTIFICATIONS

Dear Ms. Mosser:

I certify that the contents of the Bid submitted on behalf of ____________________________ in response to Iowa State (Prison) Industries for Bid Number 911 for Aluminum are true and accurate. I also certify that ___________________________________ has not made any knowingly false statements in its Bid.

Certification of Independence

By submitting a Bid in response to Iowa State (Prison) Industries Request for Bid Number 911 for ALUMINUM (RFB), I certify the following:

1.

The Bid has been developed independently, without consultation, communication or agreement with any employee or consultant to Iowa State (Prison) Industries who has worked on the development of this RFB, or with any person serving as a member of the evaluation committee.

2.

The Bid has been developed independently, without consultation, communication or agreement with any other Contractor or parties for the purpose of restricting competition.

3.

Unless otherwise required by law, the information found in the Bid has not been knowingly disclosed and will not be knowingly disclosed prior to the award of the contract, directly or indirectly, to any other Contractor.

4.

No attempt has been made or will be made by _______________________________ to induce any other Contractor to submit or not to submit a Bid for the purpose restricting competition.

5.

No relationship exists or will exist during the contract period between _______________________________________ and Iowa State (Prison) Industries that interferes with fair competition or as a conflict of interest.

Certification Regarding Debarment

6.

I certify that, to the best of my knowledge, __________________________________ and all of its principals: (a) are not presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from covered transactions by a Federal Agency or State Agency; (b) have not within a three year period preceding this Bid been convicted of, or had a civil judgment rendered against them form commission of fraud, or a criminal offense in connection with obtaining, attempting to obtain, or performing a public (federal, state, or local) transaction or contract under a public transaction, violation of antitrust statutes or commission of embezzlement, theft, forgery, falsification or destruction of records, making false statements, or receiving stolen property; (c) are not presently indicted for or other criminally or civilly charged by a government entity (federal, state, or local) with the commission of any of the offenses enumerated in (b) of this certification; and (d) have not within a three year period preceding this Bid had one or more public transactions (federal, state, or local) terminated for cause.

This certification is a material representation of fact upon which Iowa State (Prison) Industries has relied upon when this transaction was entered into. If it is later determined that the undersigned knowingly rendered an erroneous certification, in addition to other remedies available, Iowa State (Prison) Industries may pursue available remedies including suspension, debarment, or termination of the contract.

Certification Regarding Registration, Collection, and Remission of Sales and Use Tax

7.

Pursuant to Iowa Code sections 423.2(10) & 423.5(8) (2005 Code Supp.) a retailer in Iowa or a retailer maintaining a business in Iowa that enters into a contract with a state agency must register, collect, and remit Iowa sales tax and Iowa use tax levied under Iowa Code chapter 423 on all sales of tangible personal property and enumerated services. The Act also requires Contractors to certify their compliance with sales tax registration, collection, and remission requirements and provides potential consequences if the certification is false or fraudulent.

By submitting a Bid in response to Iowa State (Prison) Industries Request for Bid Number 911 for a

Aluminum (RFB), the undersigned certifies the following: (check the applicable box)

· _______________________________ is registered with the Iowa Department of Revenue, collects, and remits Iowa sales and use taxes as required by Iowa Code chapter 432; or

· _______________________________ is not a “retailer” or a “retailer maintaining a place of business in this state” as those terms are defined in Iowa Code subsections 423.1(42) & (43).

____________________________________ also acknowledges that Iowa State (Prison) Industries may declare the ____________________________________ bid or resulting contract void if the above certification is false. The _____________________________ also understands that fraudulent certification may result in Iowa State (Prison) Industries or its representative filing for damages for breach of contract.

Sincerely, [Name and Title] Attachment #2 Authorization to Release Information Letter

[Date] Ruthanne Mosser Iowa State (Prison) Industries 406 North High Street

Re:

Request for Bid Number 911

AUTHORIZATION TO RELEASE INFORMATION

Dear Ms. Mosser:

_______________________________ hereby authorizes the Iowa State (Prison) Industries or a member of the Evaluation Committee to obtain information regarding its performance on other contracts, agreements or other business arrangements, its business reputation, and any other matter pertinent to evaluation and the selection of a successful Contractor in response to Request for Bid Number 911.

The Contractor acknowledges that it may not agree with the information and opinions given by such person or entity in response to a reference request. The Contractor acknowledges that the information and opinions given by such person or entity may hurt its chances to receive contract awards from Iowa State (Prison) Industries or may otherwise hurt its reputation or operations. The Contractor is willing to take that risk.

The Contractor hereby releases, acquits and forever discharges the State of Iowa, Iowa State (Prison) Industries, their officers, directors, employees and agents from any and all liability whatsoever, including all claims, demands and causes of action of every nature and kind affecting the undersigned that it may have or ever claim to have relating to information, data, opinions, and references obtained by Iowa State (Prison) Industries or the Evaluation Committee in the evaluation and selection of a successful Contractor in response to Request for Bid Number 911.

The Contractor authorizes representatives of Iowa State (Prison) Industries or the Evaluation Committee to contact any and all of the persons, entities, and references which are, directly or indirectly, listed, submitted, or referenced in the undersigned's Bid submitted in response to Request for Bid Number 911.

The Contractor further authorizes any and all persons, entities to provide information, data, and opinions with regard to the undersigned's performance under any contract, agreement, or other business arrangement, the undersigned's ability to perform, the undersigned’s business reputation, and any other matter pertinent to the evaluation of the undersigned. The undersigned hereby releases, acquits and forever discharges any such person or entity and their officers, directors, employees and agents from any and all liability whatsoever, including all claims, demands and causes of action of every nature and kind affecting the undersigned that it may have or ever claim to have relating to information, data, opinions, and references supplied to Iowa State (Prison) Industries or the Evaluation Committee in the evaluation and selection of a successful Contractor in response to Request for Bid Number 911.

A photocopy or facsimile of this signed Authorization is as valid as an original.

Sincerely, [Printed Name of Contractor Organization]

[Name and Title of Authorized Representative]

Date

PAGE