Revised Specs.pdf

PDF 451 KB Posted

Attached to
Warehouse Cooler Bid WCSO-2027-0004
Solicitation number
BD-27-1099-WCSO1-WCSO1-133618
Issued by
Worcester County, Massachusetts

About this file

This document is a revised specification sheet for refrigeration equipment submitted by National Refrigeration and Air Conditioning Canada Corp. for the Worcester Jail, dated November 3, 2026. The project (Q19HYTDA.0083731) involves the procurement of two Quiet Line Condensing Units for Air (Model BQZA025H8-HT3D) and two Low Profile Evaporators (Model BLP320MA-S1D) for a General Walk-in Cooler system. The specifications detail the equipment configurations, standard features, and model options available for each component. The condensing units are 2.5 horsepower units with a capacity of 19,645 BTUH, utilizing R448A refrigerant, while the evaporators are low-profile units with a capacity of 19,645 BTUH and 2,040 CFM airflow. The document was submitted by Tyman Doiron and approved for the Worcester Jail facility on August 19, 2026. No contract term, renewal options, response dates, or due dates are specified in this specification document.

The specifications indicate the condensing units operate at 208-230 volts, three-phase, 60 Hz, with a sound rating of 59 decibels, while the evaporators operate at 115 volts, single-phase, 60 Hz, with a sound rating of 57 decibels. The condensing units have a shipping weight of 275 pounds each with a 14-pound refrigerant charge and include features such as a 4-year extended compressor warranty, weatherproof construction, and electronic controls. The evaporators weigh 107 pounds each with a 4-pound refrigerant charge and include electronically commutated motors with SmartSpeed Technology. Field connection requirements, dimensions, and installation specifications are provided for both units. No pricing information, funding sources, set-asides, or contract terms are detailed in this revised specification document.

View the file

Other files

File Type Posted
Revised Drawings.pdf PDF
Warehouse Walk-in Cooler Bid WCSO-2027-0004.pdf PDF
Warehouse Cooler Drawings.pdf PDF
Warehouse Cooler Boiler Plate.pdf PDF
Addendum Letter.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

QTY: 2

NATIONAL REFERIGERATION AND

AIR CONDITIONING CANADA CORP.

159 ROY BLVD. PO BOX 2020

BRANTFORD ON

CANADA N3T 5Y6

BQZA025H8-HT3D

Quiet Line

Condensing Units-Air

PURCHASER: SUBMITTED BY: Tyman Doiron SYSTEM NAME: General Walk-in Cooler DATE: Tuesday, November 3, 2026

PROJECT #: Q19HYTDA.0083731 ITEM #: 001

QUOTE #: Q19HYTDA.0083731-A ID #:

PURCHASER'S PO #: TAGGING:

STANDARD FEATURES

Copper tubing secured with cushion clamps Crankcase heater Discharge line temperature sensor Pre-formed piping Receiver with fusible plug and liquid shut off valve Sealed liquid line filter drier and sight glass Space saving, compact design Sturdy electrical control box with compressor contactor and fused control circuit

Suction and discharge service valves Weatherproof electrical control box with compressor contactor and fused control circuit Welded hermetic Scroll compressor Heavy gauge galvanized steel cabinet construction Ultra efficient Electronically Commutated Motor

(ECM)

Unit shipped with Nitrogen Holding Charge Gold Coat Fins

High efficiency enhanced copper tube and aluminium fin coil design EC Motor Speed Controller Outdoor weatherproof pre-painted steel cabinet

AWEF = 7.6

Dixell XC35CX condensing unit controller Heated and Insulated Receiver

MODEL OPTIONS

Compressor Sound Insulation

CONTACTORS

30A Contactor Discharge Line Check Valve

DISCONNECT SWITCH

1 Non-Fused Export Crating

EXTENDED 4-YEAR COMPRESSOR WARRANTY

Copeland Extended Leg Kit

FIN MATERIAL

Copper Fins

FLOODED HEAD PRESSURE CONTROL

Two Valve Adjustable 1 Heated and Insulated Receiver

LIQUID LINE FILTER + SIGHT GLASS

1 Sealed Oversized Receiver

PHASE / VOLTAGE MONITOR

6-Lead (MotorSaver455) Pump Down Toggle Switch QuickVac Valves

SUCTION ACCUMULATOR

Without Heat Exchanger

SUCTION FILTER

1 Sealed Type

TIME CLOCK

Paragon 8145 Style (Factory Installed) 230V Paragon 8145 Style (Shipped Loose) 115V Paragon 8145 Style (Shipped Loose) Wall Mount Kit 1 Wind Guard Defrost Relay

Notes : † MCA.. Minimum Circuit Ampacity, ‡ MOP.. Maximum Overcurrent Protection MCA & MOP are for the condensing unit ONLY. Single point connections WILL show different on dataplate.

APPROVALS

APPROVED BY : DATE :

Approval of this drawing signifies that the equipment is acceptable under the provision of the job specifications. Any change made hereon by any person whomsoever subject to acceptance by NATIONAL REFRIGERATION at its home office.

Worcester Jail 08.19.26 Page 1 of 4 pages

AIR CONDITIONING CANADA CORP.

159 ROY BLVD. PO BOX 2020

BRANTFORD ON

CANADA N3T 5Y6

BQZA025H8-HT3D

Quiet Line

Condensing Units-Air

PURCHASER: SUBMITTED BY: Tyman Doiron SYSTEM NAME: General Walk-in Cooler DATE: Tuesday, November 3, 2026

PROJECT #: Q19HYTDA.0083731 ITEM #: 001

QUOTE #: Q19HYTDA.0083731-A ID #:

PURCHASER'S PO #: TAGGING:

Dimensions shown are for standard unit less options.

DIMENSIONS FIELD CONNECTIONS OTHER

DIMENSION A DIMENSION E LIQUID 1/2 in PAN LOOP SHIPPING WEIGHT 275 lb DIMENSION B DIMENSION F SUCTION 7/8 in HOT GAS SIDE PORT REFRIGERANT CHARGE DIMENSION C DIMENSION G DRAIN HOT GAS INLET RECEIVER CAPACITY 14 lb

DIMENSION D DIMENSION H WATER HOT GAS OUTLET AWEF COMPLIANT YES

DISCHARGE

Voltage SYSTEM REFRIGERANT RATING Suction Temp Ambient Temp CAPACITY 208-230/3/60 R448A 2.5Hp 25.6 °F 95 °F 19645 BTUH

Fans COMPRESSOR CIRCUIT TOTAL QTY Power FLA/FAN Type QTY RLA LRA AMPS WATTS MCA† MOP‡

1 165 W 1.7 ZS19KAE-TF5 1 13.7 73 15.4 18.8 30

LIQUID 1/2 in SOUND 59 REC CAPACITY 14 lb

APPROVALS:SUCTION 7/8 in WEIGHT 275 lb REF CHARGE

Notes : † MCA.. Minimum Circuit Ampacity, ‡ MOP.. Maximum Overcurrent Protection MCA & MOP are for the condensing unit ONLY. Single point connections WILL show different on dataplate.

APPROVED BY : DATE :

NATIONAL REFRIGERATION will furnish equipment in accordance with this drawing and specifications, and subject to its published warranty. Approval of this drawing signifies that the equipment is acceptable under the provision of the job specifications. Any change made hereon by any person whomsoever subject to acceptance by NATIONAL REFRIGERATION at its home office.

Worcester Jail 08.19.26 Page 2 of 4 pages

AIR CONDITIONING CANADA CORP.

159 ROY BLVD. PO BOX 2020

BRANTFORD ON

CANADA N3T 5Y6

BLP320MA-S1D

Low Profile Evaporator

PURCHASER: SUBMITTED BY: Tyman Doiron SYSTEM NAME: General Walk-in Cooler DATE: Tuesday, November 3, 2026

PROJECT #: Q19HYTDA.0083731 ITEM #: 002

QUOTE #: Q19HYTDA.0083731-A ID #:

PURCHASER'S PO #: TAGGING:

STANDARD FEATURES

3/8" Tubing coil construction (reduces refrigerant operating charge) Factory installed solenoid valve wire harness Heavy gauge textured aluminum cabinet construction resists scratches/corrosion Spacious piping end compartment allows for easy assembly Hinged drain pan with central universal drain connection (3/4" drain)

Front access to spacious electrical and header compartments Schrader connection on suction header Attractive and durable high density polyethylene fan guards Ultra efficient Electronically Commutated Motor

(ECM)

ECM with SmartSpeed Technology

High efficiency enhanced copper tube and aluminium fin coil design

6 FPI

AWEF = 9.0

Unit Cooler is DOE/NRCAN compliant with R404A/R507/R448A/R449A/R407A/R407C

MODEL OPTIONS

PRE-ASSEMBLED EVAP

1 SmartVap+ with EEV and Solvlv Sporlan TXV, LLSV,T-stat KE2 Evap Efficiency w/Sporlan EEV (Factory

Installed) KE2 Evap Efficiency w/Sporlan EEV (Shipped

Loose) Aux Sideport Connector

CABINET FINISH

Painted White Stainless Steel

AIR TEMP SENSOR

Return Air Temp Sensor (CPC)

COIL TEMP SENSOR

Coil Surface Temp Sensor (CPC)

DEMAND DEFROST ELECTRONIC CONTROLLER

KE2 Therm Evaporator Efficiency (Factory

Installed) KE2 Therm Evaporator Efficiency (Shipped Loose) Dual Circuit

ELECTRONIC CONTROLLER

KE2 Temp+Defrost (Factory Installed) 1 SmartVap+ Control Board and Display (Factory

Installed)

EXPANSION VALVE

Sporlan TXV Sporlan EEV 1 EEV for SmartVap+ Evaporator Disconnect Switch

EVAPORATOR PRISON PACKAGE

Tamper Proof Screws Export Crating

COIL COATING

Heresite Coating E-Coat

FIN MATERIAL

Gold Coat Fins Copper Fins Insulated Drain Pan

KE2 THERM

Remote Combo Display (Shipped Loose) Ethernet Adapter Kit CAT5e Shielded Cable - 50ft w/connectors

(Shipped Loose) Temp Sensors for Shipped Loose Controller

LIQUID / SUCTION HEAT EXCHANGER

(Shipped Loose)

LIQUID LINE SOLENOID VALVE

1 Sporlan (Factory Installed) Dual Voltage Coil 120-230V Field Wired Nitrogen Charged and Sealed

ROOM THERMOSTATS

Johnson: A421ABD-412D (Shipped Loose) Johnson A421ABD-412D (Factory Installed) Wire Fan Guards

REMOTE DEFROST PANEL

230V Control (Shipped Loose) 115V Control (Shipped Loose)

INSTALLATION REQUIREMENTS

1 Minimum slope of 1" per foot on all drain lines 1 P-trap per evap required outside of box

CRN REGISTRATION

For Evaporators

USED WITH MECHANICAL SUBCOOLER

Circuit for sub-cooled Liquid - note temperature

Notes : † MCA.. Minimum Circuit Ampacity, ‡ MOP.. Maximum Overcurrent Protection APPROVALS

APPROVED BY : DATE :

Approval of this drawing signifies that the equipment is acceptable under the provision of the job specifications. Any change made hereon by any person whomsoever subject to acceptance by NATIONAL REFRIGERATION at its home office.

Worcester Jail 08.19.26 Page 3 of 4 pages

AIR CONDITIONING CANADA CORP.

159 ROY BLVD. PO BOX 2020

BRANTFORD ON

CANADA N3T 5Y6

BLP320MA-S1D

Low Profile Evaporator

PURCHASER: SUBMITTED BY: Tyman Doiron SYSTEM NAME: General Walk-in Cooler DATE: Tuesday, November 3, 2026

PROJECT #: Q19HYTDA.0083731 ITEM #: 002

QUOTE #: Q19HYTDA.0083731-A ID #:

PURCHASER'S PO #: TAGGING:

Dimensions shown are for standard unit less options.

DIMENSIONS FIELD CONNECTIONS OTHER

DIMENSION A 62 1/4 in DIMENSION E LIQUID 3/8 in PAN LOOP SHIPPING WEIGHT 107 lb DIMENSION B 49 1/4 in DIMENSION F SUCTION 7/8 in HOT GAS SIDE PORT REFRIGERANT CHARGE 4 lb DIMENSION C DIMENSION G DRAIN 3/4 in HOT GAS INLET RECEIVER CAPACITY

DIMENSION D DIMENSION H WATER HOT GAS OUTLET AWEF COMPLIANT YES

DISCHARGE

Voltage SYSTEM REFRIGERANT AIR FLOW Evap Temp Box Temp CAPACITY

115/1/60 R448A 2040 CFM 25.6 °F 35 °F 19645 BTUH

Fans HEATERS CIRCUIT TOTAL QTY Power FLA/FAN Type QTY AMPS AMPS WATTS MCA† MOP‡

3 0.07 HP 1 3 180 3.3 15

DISTRIBUTOR 3/8 in SOUND 57 REC CAPACITY

APPROVALS:SUCTION 7/8 in WEIGHT 107 lb REF CHARGE 4 lb Notes : † MCA.. Minimum Circuit Ampacity, ‡ MOP.. Maximum Overcurrent Protection

APPROVED BY : DATE :

NATIONAL REFRIGERATION will furnish equipment in accordance with this drawing and specifications, and subject to its published warranty. Approval of this drawing signifies that the equipment is acceptable under the provision of the job specifications. Any change made hereon by any person whomsoever subject to acceptance by NATIONAL REFRIGERATION at its home office.

Worcester Jail 08.19.26 Page 4 of 4 pages

File details come from the government source that posted it. Updated .