Requirements List.pdf

PDF 75 KB Posted

Attached to
Generac Generator
Solicitation number
TOST-20-0344
Issued by

View the file

Other files

File Type Posted
Solicitation.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

REQUIREMENTS LIST

Quantity 1 - Generac Industrial diesel engine-driven generator set with turbocharged/aftercooled 6-cylinder 6.7L engine, consisting of the following features and accessories:

Stationary Emergency-Standby rated 100 kW Rating, wired for 277/480 VAC three phase, 60 Hz Permanent Magnet Excitation Level 1 Acoustic Enclosure, Aluminum o Industrial Grey Baked-On Powder Coat Finish

UL2200

EPA Certified H-100 Control Panel o Meets NFPA 99 and 110 requirements o Temp Range -40 to 70 degrees C o Digital Microprocessor:

Two 4-line x 20 displays, full system status 3 Phase sensing, +/-0.25% digital voltage regulation RS232, RS485 and Canbus remote ports Waterproof connections All engine sensors are 4-20ma for minimal interference Programmable I/O Built-in PLC for special applications o Engine function monitoring and control:

Full range standby operation; programmable auto crank, Emergency Stop, Auto-Off-

Manual switch Isochronous Governor, +/-0.25% frequency regulation Full system status on all AC output and engine function parameters Service reminders, trending, fault history (alarm log) I2T function for full generator protection Selectable low-speed exercise o HTS transfer switch function monitoring and control o 2-wire start controls for any 2-wire transfer switch

21 Light Annunciator - Surface Remote Emergency Stop Switch, Surface-Mount, shipped loose 110 AH, 925 CCA Group 31 Battery, with rack, installed Standard MLCB, 80% rated thermal-magnetic o 175 Amp Battery Charger, 10 Amp, NFPA 110 compliant, installed Coolant Heater, 1500W 36" 693 Gallon Double-Wall UL142 Basetank o Mechanical fuel level indicator gauge o Electronic fuel level sender o Emergency Vent o 13" Fuel Fill Extension

Pad Vibration Isolators 3 Owner's Manuals 120V GFCI and 240V Outlet Standard 2-Year Limited Warranty

SD0100KG176.7D18HPSY3

Quantity 1 - TRANSFER SWITCH - TX SERIES

200 Amp, 3 pole, 277/480 VAC three phase, 60 Hz, with 2-Wire Start Circuit o Utility Voltage Sensing Controls:

Adjustable Drop-out and Pick-up

Adjustable Utility Interrupt Delay o Adjustable Logic Controls:

Minimum Standby Voltage Minimum Standby Frequency Engine Warmup Return to Utility Engine Cooldown Transfer on Exercise

Enclosure Heater Double Set of Form C Auxiliary Contacts UL Listed 1008 by ETL Controller and Circuit Breaker Covers, Padlockable, Black NEMA 3R Enclosure 3 Owner's Manuals 42KA Contactor Withstand and Closing Rating Service Entrance Rated In Phase Only Transfer Standard two year basic warranty

TX301NS0200K3CH

File details come from the government source that posted it. Updated .