Request for Quote - Generator.pdf

REQUEST FOR QUOTE

US Forest Service, Missoula Technology & Development Center

Missoula, MT

DESCRIPTION:

The US Forest Service, Missoula Technology & Development Center (MTDC) has a need to procure and install a generator to protect laboratory electrical loads at the MTDC campus, located at 5785 Hwy. 10 W., Missoula, MT 59808. See attached Performance Work Statement (PWS) for details.

All questions regarding this RFQ must be in writing and may be sent by e‐mail to matthew.cox2@usda.gov.

Questions must be received no later than 7/28/2020 at 3:00PM Mountain Time (MT). No further questions will be accepted after that date and time unless deemed in the best interest of the Government by the Contracting Officer.

You are reminded that representatives from your company SHALL NOT contact any US Forest Service employees to discuss this RFQ during this procurement phase. All questions and concerns regarding this RFQ shall be directed to the above contracting officials.

NOTE 1 - The estimated quantities shown are for evaluation purposes only. Contractor will be paid for actual quantities.

NOTE 2 - Quotes are required on all items. The quoter must quote on all items. Only quotes to the nearest cent will be accepted.

Quoted Price

Work will be performed and invoiced on a monthly basis in arrears.

Quoters are encouraged to inspect the site prior to submitting a quote to assess the condition of the site and the scope of work proposed. An organized site-visit is scheduled for 10:00AM MT, Thursday, July 23, 2020 in the main entrance lobby located at:

Missoula Technology & Development Center 5785 Hwy. 10 W.

Missoula, MT 59808

Failure to attend does not relieve the quoter from accurately determining the scope of work required.

NOTE 3 – Site visit attendees shall provide for themselves and wear a mask at all times during the site visit. Those without a mask will not be allowed to participate in the site visit walk through. No one should attend the visit who is feeling sick, has a fever, or has been exposed to an active or presumed person with COVID-19. COVID-19 mitigation efforts and social distancing directives issued from the State of Montana and USDA facility access requirements are in full force and effect. The Contracting Officer (CO) and Contracting Officer’s Representative (COR) have the unilateral right to bar any attendee from participating in the mailto:matthew.cox2@usda.gov site visit at any time (before or during) based on the attendee’s failure to abide by this direction.

A post award, pre-work meeting will be scheduled with the contractor within ten (10) days of contract award.

QUOTE SUBMISSION: All quotes shall be submitted via email to matthew.cox2@usda.gov no later than 5:00PM MT, August 3, 2020.

*See Schedule of Items for Quote submission.

To be considered for award your quote must include the following:

1. Quote submitted on the Schedule of Items found within this solicitation.

2. All vendors must be registered and complete all entries in the System for Award Management (SAM) to be considered for award. Potential vendors may register at the following web site:

https://www.sam.gov/portal/public/SAM

3. All Quote submissions must list your DUNS number, CAGE code, and Federal TIN with Company name, POC, and phone number. If you need to obtain or renew a DUNS number or CAGE code, please visit www.sam.gov . Lack of registration in the SAM database will make an offeror ineligible for award.

4. The government intends to award a contract as a result of this RFQ that will include the terms and conditions set forth herein.

EVALUATION OF QUOTES:

Award shall be made to the vendor whose quotation offers the best value to the Government that meets the terms and conditions heroin, in accordance with FAR 13.106-1(a)(2).

(End of Section) mailto:matthew.cox2@usda.gov https://www.sam.gov/portal/public/SAM http://www.sam.gov/

SCHEDULE OF ITEMS & PERFORMANCE

WORK STATEMENT

Generator Installation

1. SCHEDULE OF ITEMS:

CLIN Description Unit Qty Unit Cost Total Cost

0001 PURCHASE, INSTALL, AND

COMMISSION 48 KW (OR

GREATER) PRIME GENERATOR,

NATURAL GAS FUELS, 208 VAC/3

PHASE OUTPUT AT MTDC.

JB 1 $______________ $_______________

TOTAL COST: $_______________

2. PERFORMANCE WORK STATEMENT:

A. INTRODUCTION: The US Forest Service, National Technology & Development Program, Missoula Technology & Development Center (MTDC), has a need to procure and install a generator to protect laboratory electrical loads at the MTDC campus, located at 5785 Hwy 10 W., Missoula, MT 59808. All work shall be completed in accordance with the content of this scope of work, specifications, and attached drawings.

B. SCOPE OF WORK: The contractor shall furnish all labor, transportation, equipment, material, supervision, integration, and expertise necessary to install a complete, usable, and reliable optional standby system which provides emergency power to all loads on panels LC and LC2 (225 Amps, 120/208V) at the MTDC facility. The contractor shall provide/accomplish the following:

- Generac Protector QS RG048 natural gas, 48kW generator, 120/208V, or equal:

o Liquid Cooled o Powder coated aluminum enclosure o Three-phase operation o Configured for natural gas operation o Programmable start delay o Auto, Off, and Manual modes o Self-protection automatic shutdown features (high temp, overspeed, low oil, etc) o +/-1% voltage regulation o 5 Year warranty o UL2200 Listed o Digital controller display

Section A - Schedule of Items & Performance Work Statement o Cold weather kit and all associated wiring / feed for warmer (include both engine block heater and battery warmer, with associated thermostat)

- Compatible, 3-phase, NEMA 3R automatic transfer switch o Generac ATS or equal o Amperage rating fully coordinated with Panel LC & LC2 loads o Open Delayed Transition capability

- Install gas service from the existing main line to feed the generator, including any fittings, piping, regulators, or other appurtenances necessary. Follow all Northwestern Energy requirements and permitting processes, if any. Assure sizing of the new feed is adequate to meet the demand of the new generator. Bury this service between the mechanical room and generator pad.

- Other Details:

o All copper conductors, cables, and busbars shall be used. Install new panelboards if necessary.

o Installation shall fully comply with all requirements of the National Electric Code, requirements of the International Plumbing Code, requirements of the International Fuel Gas Code, industry best practice, and Northwestern Energy requirements, recommendations, and standards.

o If necessary, assure all loads are adequately balanced across phases to assure reliable operation of the generator.

o Install according to all manufacturer standards, recommendations, and guidelines.

- Execution: The contractor shall accomplish the following:

o All work shall comply with all applicable OSHA requirements.

o A prime contractor superintendent shall be on-site at all times during the performance of work by prime contractor and/or sub-contractor employees.

o Include start up and testing of the generator, ATS, and overall system.

o Include all associated wiring and circuit relocation, if needed, for reliable operation and code compliance.

o Seal all penetrations.

o Provide a 1-hour owner training at acceptance.

o Install all necessary signage and barriers to maintain a safe environment for

MTDC staff and contractor personnel, as well as to minimize impact on the working environment from dust, waste, and other possible contaminants as a result of the work.

o Restore all landscaping after installation.

o Comply with NECA 1 for workmanship.

C. SITE CLEAN-UP AND WORKMANSHIP: The project site shall be maintained in a neat and orderly manner and cleaned of rubbish and any waste material prior to the end of each day.

All excess materials, debris, and rubbish become the property of the Contractor and shall be removed on a daily basis unless otherwise approved by the Contracting Officer Representative

(COR).

The Contracting Officer (CO) and COR shall be sole judge of workmen-like manner and workmanship. The CO and COR shall use industry standards as basis for judgment of workmanship.

D. SUBMITTALS: All written deliverables shall be phrased in layperson language. Statistical and other technical terminology shall not be used without providing a glossary of terms.

It is the Contractor’s responsibility to submit all items prior to beginning work. The Contractor shall allow 5-days for processing of submittals by the Government. Approvals must be obtained before starting work. Submittals are required for the following:

• Generator product data

• ATS product data

• Proposed layout of circuits, wiring pathways, and materials to be used

• Site and activity specific safety plan

• Site Plan

• Work Schedule: Some materials have long lead times and are weather dependent for installation. The schedule shall indicate these work items and time frames for COR/CO approval.

F. UTILITIES: Electricity and water is available at the site at no cost to the contractor.

Sanitary facilities shall be supplied by the contractor.

G. SCHEDULE:

1. Place of Performance: Missoula Technology & Development Center (MTDC), 5785 Hwy 10 W., Missoula, MT 59808.

2. Period of Performance: All work shall be completed no later than 90 calendar days from the date of contract award.

3. Work Hours: All work shall be performed during normal business hours between 8:00 am to 4:30 pm, Monday through Friday with the exception of Federal Holidays (see below for holiday schedule). Any work performed outside of this timeframe shall be approved by the COR prior to start. For work items that will impact office operations

(ie) access to courtyard, please coordinate specifics with COR a minimum of 2-weeks prior to anticipated start date.

4. Federal Holidays Observed: Labor Day, Columbus Day, Veteran’s Day, Thanksgiving Day, New Year’s Day, Martin Luther King Day, President's Day, Memorial Day, Independence Day, Christmas Day, and any other day specifically designated by the President of the United States.

H. GENERAL REQUIREMENTS:

1. Work shall comply with the latest edition of all local, state and national codes and standards including any addenda, supplements, amendments or modifications by national, state or local authorities having jurisdiction and in effect on the day this contract is awarded. Where more than one criterion applies, the more stringent criteria shall be used.

2. The contractor’s superintendent shall be on site at all times during the performance of work herein.

3. The contractor shall visit the job site to thoroughly familiarize himself with all the details of this work and working conditions. The contractor shall also verify all dimensions in the field and shall advise the CO and COR of any discrepancy before performing any work. The contractor shall be responsible for the coordination and proper relation of his work to the building, structure, phasing and ensure the safety of employees and workmen.

4. The contractor does not have assigned parking and is responsible for parking in authorized locations only. It is the responsibility of the contractor to park in the appropriate designated parking areas. The office and parking areas will be occupied during work and coordination with the COR will be required for scheduling activities and if/when space will not be accessible for employees during work.

5. All OSHA safety regulations shall be observed during the performance of work identified on this contract. The contractor shall provide signage and barricades to maintain safety and protection of work around project work site.

6. Contractor personnel shall sign in at the front desk. All non-uniformed personnel shall wear visible, USDA Visitor Identification at all times while on the premises of the MTDC campus.

7. Drawings for all existing utilities are available upon request from the COR. It is the contractor’s responsibility to verify the location of existing underground utilities and to protect them during work. Hand dig within 24” of hazardous energy sources and follow all recommendations of NEC 70E.

Locate generator on 4” concrete pad, broom finish, at least 2” above grade from surrounding rock landscaping.

Provide min 1% slope on slab surface for drainage. Locate generator and pad min 5’ south of existing transformer T2. Provide underground PVC conduit for conductors to exterior mounted automatic transfer switch in weatherproof NEMA 3R enclosure or better. Minimum bury depth of PVC to be at least 18”. Locate all surrounding utilities before digging, protect existing utilities, and coordinate and perform any outages required for the installation.

Approximate generator location, not to scale. Verify final location with COR.

Section B – Supplies or Services Prices

See CLIN(s).

(End of Section B)

Section C – Description/specifications

All work to be completed in accordance with terms and conditions and Performance Work Statement herein.

(End of Section C)

Section D – Packaging and Marking

All deliverables to be provided to the Contracting Officer’s Representative (COR).

(End of Section D)

Section E – Inspection and Acceptance

Deliverables to be inspected by the COR or the Program Staff.

(End of Section E)

Section F – Deliverables or Performance

All deliverables to be provided in accordance with the terms and conditions, Performance Work Statement, herein.

(End of Section F)

Section G – Contract Administration Data

Contracting Officer: Contract Specialist: COR:

Jason King Matthew Cox Ted Etter 201 14th Street, SW 5785 Hwy 10 W 5785 Hwy 10 W Washington, DC 20024 Missoula, MT 59808 Missoula, MT 59808 jason.king@usda.gov matthew.cox2@usda.gov ted.etter@usda.gov 703-605-5309 406-829-6767 406-329-3980

(End of Section G) mailto:jason.king@usda.gov mailto:matthew.cox2@usda.gov mailto:ted.etter@usda.gov

Section H – Special Contract Requirements

Invoicing.

All invoices shall be provided to the Government via the Invoice Processing Platform found at https://www.ipp.fms.treas.gov/. Invoices shall be submitted no more than monthly. Invoices shall provide a clear understanding of the work performed in the previous billing period and shall contain enough documentation to justify the price billed for that period.

Upon award of a contract, Contractors will be enrolled automatically. Contractor will subsequently receive electronic notification from IPP of enrollment. IPP password will be delivered electronically to allow first login to IPP. Contractors shall submit all invoices electronically via IPP. Paper copies of invoices will no longer be accepted.

(End of Section H)

Section I - Contract Clauses

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders - Commercial Items. (MAY 2019)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (JUL 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

[ ] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (SEP 2006), with Alternate I (OCT 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

[ ] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (OCT 2015) (41 U.S.C. 3509).

[ ] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[ ] (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (OCT 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).

(5) (Reserved) [ ] (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

[ ] (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

https://www.ipp.fms.treas.gov/

[X] (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (OCT 2015) (31 U.S.C. 6101 note).

[ ] (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

[ ] (10) (Reserved) [ ] (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011)(15 U.S.C. 657a).

[ ] (ii) Alternate I (NOV 2011) of 52.219-3.

[ ] (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[ ] (ii) Alternate I (JAN 2011) of 52.219-4.

[ ] (13) (Reserved) [X] (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Mar 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (NOV 2011).

[ ] (iii) Alternate II (NOV 2011).

[ ] (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (JUN 2003) (15 U.S.C. 644).

[ ] (ii) Alternate I (OCT 1995) of 52.219-7.

[ ] (iii) Alternate II (MAR 2004) of 52.219-7.

[ ] (16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

[ ] (17)(i) 52.219-9, Small Business Subcontracting Plan (AUG 2018) (15 U.S.C. 637(d)(4)).

[ ] (ii) Alternate I (NOV 2016) of 52.219-9.

[ ] (iii) Alternate II (NOV 2016) of 52.219-9.

[ ] (iv) Alternate III (NOV 2016) of 52.219-9.

[ ] (v) Alternate IV (AUG 2018) of 52.219-9.

[ ] (18) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

[ ] (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

[ ] (20) 52.219-16, Liquidated Damages-Subcontracting Plan (JAN 1999) (15 U.S.C. 637(d)(4)(F)(i)).

[ ] (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).

[X] (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (MAR 2020) (15 U.S.C.

632(a)(2)).

[ ] (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (DEC 2015) (15 U.S.C. 637(m)).

[ ] (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (DEC 2015) (15 U.S.C. 637(m)).

[ ] (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

[ ] (26) 52.219-33, Nonmanufacturer Rule (Mar 2020) (15 U.S.C. 637(a)(17)).

[X] (27) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

[X] (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (JAN 2018) (E.O. 13126).

[X] (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

[X] (30)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

[ ] (ii) Alternate I (FEB 1999) of 52.222-26.

[ ] (31)(i) 52.222-35, Equal Opportunity for Veterans (OCT 2015) (38 U.S.C. 4212).

[ ] (ii) Alternate I (JUL 2014) of 52.222-35.

[X] (32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).

[ ] (ii) Alternate I (JUL 2014) of 52.222-36.

[ ] (33) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

[ ] (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

[X] (35)(i) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O.

13627).

[ ] (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[ ] (36) 52.222-54, Employment Eligibility Verification (OCT 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

[ ] (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPADesignated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ](38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons

(JUN 2016) (E.O. 13693).

[ ](39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

[ ] (40)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

[ ] (ii) Alternate I (OCT 2015) of 52.223-13.

[ ] (41)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514). (ii) Alternate I (JUN 2014) of 52.223-14.

[ ] (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b).

[ ] (43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

[ ](ii) Alternate I (JUN 2014) of 52.223-16.

[X] (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) [ ] (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

[ ] (46) 52.223-21, Foams (JUN 2016) (E.O. 13693).

[ ] (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

[ ] (ii) Alternate I (JAN 2017) of 52.224-3.

[X] (48) 52.225-1, Buy American-Supplies (MAY 2014) (41 U.S.C. chapter 83).

[ ] (49)(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (MAY 2014) (41 U.S.C.

chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[ ] (ii) Alternate I (MAY 2014) of 52.225-3.

[ ] (iii) Alternate II (MAY 2014) of 52.225-3.

[ ] (iv) Alternate III (MAY 2014) of 52.225-3.

[ ] (50) 52.225-5, Trade Agreements (AUG 2018) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[X] (51) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[ ] (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

[ ] (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150).

[ ] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C. 5150).

[ ] (55) 52.232-29, Terms for Financing of Purchases of Commercial Items (FEB 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

[ ] (56) 52.232-30, Installment Payments for Commercial Items (JAN 2017) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

[X] (57) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (OCT 2018) (31 U.S.C. 3332).

[ ] (58) 52.232-34, Payment by Electronic Funds Transfer - Other than System for Award Management

(JUL 2013) (31 U.S.C. 3332).

[ ] (59) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

[ ] (60) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

[ ] (61) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

[ ] (62)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

[ ] (ii) Alternate I (APR 2003) of 52.247-64.

[ ] (iii) Alternate II (FEB 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(Contracting Officer check as appropriate.)

[ ] (1) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495).

[X] (2) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

[X] (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[ ] (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[ ] (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

[ ] (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (MAY 2014) (41 U.S.C. chapter 67).

[ ] (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY 2014) (41 U.S.C. chapter 67).

[X] (8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015).

[X] (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

[ ] (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C.

1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records - Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement.

Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) of this paragraph in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (OCT 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (JUL 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(vii) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (OCT 2015) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

(xiii) [ ] (A) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O.

13627).

[ ] (B) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (MAY 2014) (41 U.S.C. chapter 67).

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY 2014) (41 U.S.C. chapter 67).

(xvi) 52.222-54, Employment Eligibility Verification (OCT 2015) (E. O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015).

(xviii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xix)(A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C.

2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C.

1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

52.252-2 Clauses Incorporated by Reference. (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address: https://www.acquisition.gov/ https://www.acquisition.gov/

52.203-3 Gratuities. (APR 1984)

52.204-13 System for Award Management Maintenance. (OCT 2018)

52.204-18 Commercial and Government Entity Code Maintenance (JUL 2016)

52.212-4 Contract Terms and Conditions-Commercial Items (OCT 2018)

52.219-6 Notice of Total Small Business Set-Aside (DEVIATION 2019-01)

52.232-40 Providing Accelerated Payments to Small Business Subcontractors. (DEC 2013)

52.236-7 Permits and Responsibilities (NOV 1991)

452.211-72 Statement of Work/Specifications (FEB 1988)

452.224-70 Confidentiality of Information. (FEB 1988)

452.237-75 Restrictions Against Disclosure. (FEB 1988)

452.237-78 Contracts with Consulting Firms for Services. (FEB 1988)

452.247-72 Packing For Domestic Shipment (FEB 1988)

452.246-70 Inspection and Acceptance. (FEB 1988)

(a) The Contracting Officer or the COR duly authorized representative will inspect and accept the supplies and/or services to be provided under this contract.

(b) Inspection and acceptance will be performed at:

Missoula Technology & Development Center 5785 Hwy 10 W Missoula, MT 59808

452.247-70 Delivery Location. (FEB 1988) Shipment of deliverable items, other than reports, shall be to:

Missoula Technology & Development Center 5785 Hwy 10 W

(End of clause)

452.247-71 MARKING DELIVERABLES (FEB 1988)

(a) The contract number shall be placed on or adjacent to all exterior mailing or shipping labels of deliverable items called for by the contract.

(b) Mark deliverables, except reports, for:

Missoula Technology & Development Center 5785 Hwy 10 W

(End of Section I)

Section J - Contract Provisions

52.216-1 Type of Contract (APR 1984)

The Government contemplates award of a Firm Fixed-Priced contract resulting from this solicitation.

(End of Provision)

52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): Federal Acquisition Regulations - http://www.acquisition.gov/far and the Agriculture Acquisition Regulations – http://www.usda.gov/procurement/policy/agar.html.

52.204-7 System for Award Management (OCT 2018)

52.204-16 Commercial and Government Entity Code Reporting (JUL 2015)

52.212-1 Instructions to Offerors-Commercial Items (OCT 2018)

452.219-70 Size Standard and NAICS Code Information (SEP 2001) The North American Industrial Classification System Code(s) and business size standard(s) describing the products and/or services to be acquired under this solicitation are listed below:

Contract line item(s): _1__ -- NAICS Code: 238210 -- Size Standard $16.50 http://www.acquisition.gov/far http://www.usda.gov/procurement/policy/agar.html

(End of Section J)

Section K - List of Documents, Exhibits and Other Attachments

Service Contract Labor Standards Statute: If this is a contract in excess of $2,500, the Contractor is required to pay certain minimum wages to all service employees working under this contract.

These required minimum wages are stated in the attached Register of Wage Determinations under the Service Contract Labor Standards statute.

The following attachments are a part of this solicitation and any resulting contract (see separate document(s)).

Attachment 1: Performance Work Statement – 4 pages.

Attachment 2: Electrical Plans – 2 pages.

Attachment 3: MTDC Generator Drawing – 1 pages.

Attachment 4: Wage Determinations - Wage Determination No.: 2015-5393, Revision No.: 10 Date of Last Revision: 06/30/2020

(End of Section K)

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5393 Daniel W. Simms Division of | Revision No.: 10 Director Wage Determinations| Date Of Last Revision: 06/30/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Montana

Area: Montana County of Missoula

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.20 01012 - Accounting Clerk II 15.94 01013 - Accounting Clerk III 17.84 01020 - Administrative Assistant 26.99 01035 - Court Reporter 18.55 01041 - Customer Service Representative I 13.30 01042 - Customer Service Representative II 14.95 01043 - Customer Service Representative III 16.31 01051 - Data Entry Operator I 12.89 01052 - Data Entry Operator II 14.06 01060 - Dispatcher Motor Vehicle 18.29 01070 - Document Preparation Clerk 14.77 01090 - Duplicating Machine Operator 14.77 01111 - General Clerk I 12.70 01112 - General Clerk II 13.85 01113 - General Clerk III 15.55 01120 - Housing Referral Assistant 20.68 01141 - Messenger Courier 12.04 01191 - Order Clerk I 13.54 01192 - Order Clerk II 14.77 01261 - Personnel Assistant (Employment) I 16.58 01262 - Personnel Assistant (Employment) II 18.55 01263 - Personnel Assistant (Employment) III 20.68 01270 - Production Control Clerk 24.21 01290 - Rental Clerk 14.07 01300 - Scheduler Maintenance 16.58 01311 - Secretary I 16.58 01312 - Secretary II 18.55 01313 - Secretary III 20.68 01320 - Service Order Dispatcher 16.53

7/17/2020https://beta.sam.gov/wage-determination/2015-5393/10?index=wd&is_active=true&date_f...

01410 - Supply Technician 26.99 01420 - Survey Worker 15.52 01460 - Switchboard Operator/Receptionist 13.27 01531 - Travel Clerk I 12.38 01532 - Travel Clerk II 13.28 01533 - Travel Clerk III 14.15 01611 - Word Processor I 14.77 01612 - Word Processor II 16.58 01613 - Word Processor III 18.55 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 20.19 05010 - Automotive Electrician 17.09 05040 - Automotive Glass Installer 15.92 05070 - Automotive Worker 15.92 05110 - Mobile Equipment Servicer 13.78 05130 - Motor Equipment Metal Mechanic 18.25 05160 - Motor Equipment Metal Worker 15.92 05190 - Motor Vehicle Mechanic 18.25 05220 - Motor Vehicle Mechanic Helper 12.78 05250 - Motor Vehicle Upholstery Worker 14.85 05280 - Motor Vehicle Wrecker 15.92 05310 - Painter Automotive 17.09 05340 - Radiator Repair Specialist 15.92 05370 - Tire Repairer 15.11 05400 - Transmission Repair Specialist 18.25 07000 - Food Preparation And Service Occupations 07010 - Baker 13.36 07041 - Cook I 13.09 07042 - Cook II 15.12 07070 - Dishwasher 10.47 07130 - Food Service Worker 9.95 07210 - Meat Cutter 14.74 07260 - Waiter/Waitress 9.40 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.32 09040 - Furniture Handler 14.38 09080 - Furniture Refinisher 19.32 09090 - Furniture Refinisher Helper 16.91 09110 - Furniture Repairer Minor 18.91 09130 - Upholsterer 19.32 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 11.14 11060 - Elevator Operator 12.93 11090 - Gardener 16.42 11122 - Housekeeping Aide 12.93 11150 - Janitor 12.93 11210 - Laborer Grounds Maintenance 12.47 11240 - Maid or Houseman 10.68 11260 - Pruner 11.02 11270 - Tractor Operator 15.10 11330 - Trail Maintenance Worker 12.47 11360 - Window Cleaner 14.58 12000 - Health Occupations 12010 - Ambulance Driver 15.19 12011 - Breath Alcohol Technician 20.56 12012 - Certified Occupational Therapist Assistant 27.31 12015 - Certified Physical Therapist Assistant 27.85 12020 - Dental Assistant 18.04 12025 - Dental Hygienist 38.01 12030 - EKG Technician 31.61 12035 - Electroneurodiagnostic Technologist 31.61 12040 - Emergency Medical Technician 15.19 12071 - Licensed Practical Nurse I 18.37 12072 - Licensed Practical Nurse II 20.56 12073 - Licensed Practical Nurse III 22.92 12100 - Medical Assistant 18.74 12130 - Medical Laboratory Technician 28.04 12160 - Medical Record Clerk 15.23

12190 - Medical Record Technician 17.04 12195 - Medical Transcriptionist 18.37 12210 - Nuclear Medicine Technologist 45.18 12221 - Nursing Assistant I 11.55 12222 - Nursing Assistant II 12.99 12223 - Nursing Assistant III 14.17 12224 - Nursing Assistant IV 15.91 12235 - Optical Dispenser 16.52 12236 - Optical Technician 18.37 12250 - Pharmacy Technician 17.13 12280 - Phlebotomist 16.79 12305 - Radiologic Technologist 26.69 12311 - Registered Nurse I 23.10 12312 - Registered Nurse II 28.27 12313 - Registered Nurse II Specialist 28.27 12314 - Registered Nurse III 34.20 12315 - Registered Nurse III Anesthetist 34.20 12316 - Registered Nurse IV 40.99 12317 - Scheduler (Drug and Alcohol Testing) 25.46 12320 - Substance Abuse Treatment Counselor 20.43 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 19.15 13012 - Exhibits Specialist II 23.72 13013 - Exhibits Specialist III 29.02 13041 - Illustrator I 19.15 13042 - Illustrator II 23.72 13043 - Illustrator III 29.02 13047 - Librarian 26.27 13050 - Library Aide/Clerk 15.09 13054 - Library Information Technology Systems 23.72 Administrator 13058 - Library Technician 14.61 13061 - Media Specialist I 17.11 13062 - Media Specialist II 19.15 13063 - Media Specialist III 21.35 13071 - Photographer I 17.11 13072 - Photographer II 19.15 13073 - Photographer III 23.72 13074 - Photographer IV 29.02 13075 - Photographer V 35.11 13090 - Technical Order Library Clerk 19.04 13110 - Video Teleconference Technician 18.68 14000 - Information Technology Occupations 14041 - Computer Operator I 13.94 14042 - Computer Operator II 15.60 14043 - Computer Operator III 17.39 14044 - Computer Operator IV 19.32 14045 - Computer Operator V 21.40 14071 - Computer Programmer I (see 1) 21.01 14072 - Computer Programmer II (see 1) 26.04 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 13.94 14160 - Personal Computer Support Technician 19.32 14170 - System Support Specialist 27.58 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.19 15020 - Aircrew Training Devices Instructor (Rated) 35.31 15030 - Air Crew Training Devices Instructor (Pilot) 42.15 15050 - Computer Based Training Specialist / Instructor 29.19 15060 - Educational Technologist 29.07 15070 - Flight Instructor (Pilot) 42.15 15080 - Graphic Artist 19.77 15085 - Maintenance Test Pilot Fixed Jet/Prop 42.15 15086 - Maintenance Test Pilot Rotary Wing 42.15

15088 - Non-Maintenance Test/Co-Pilot 42.15 15090 - Technical Instructor 22.85 15095 - Technical Instructor/Course Developer 27.96 15110 - Test Proctor 18.45 15120 - Tutor 18.45 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.61 16030 - Counter Attendant 9.61 16040 - Dry Cleaner 11.40 16070 - Finisher Flatwork Machine 9.61 16090 - Presser Hand 9.61 16110 - Presser Machine Drycleaning 9.61 16130 - Presser Machine Shirts 9.61 16160 - Presser Machine Wearing Apparel Laundry 9.61 16190 - Sewing Machine Operator 12.16 16220 - Tailor 12.94 16250 - Washer Machine 10.07 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.47 19040 - Tool And Die Maker 29.08 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.04 21030 - Material Coordinator 24.21 21040 - Material Expediter 24.21 21050 - Material Handling Laborer 14.36 21071 - Order Filler 13.39 21080 - Production Line Worker (Food Processing) 18.04 21110 - Shipping Packer 15.44 21130 - Shipping/Receiving Clerk 15.44 21140 - Store Worker I 12.53 21150 - Stock Clerk 17.82 21210 - Tools And Parts Attendant 18.04 21410 - Warehouse Specialist 18.04 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 26.53 23019 - Aircraft Logs and Records Technician 20.72 23021 - Aircraft Mechanic I 25.06 23022 - Aircraft Mechanic II 26.53 23023 - Aircraft Mechanic III 28.07 23040 - Aircraft Mechanic Helper 17.69 23050 - Aircraft Painter 23.85 23060 - Aircraft Servicer 20.72 23070 - Aircraft Survival Flight Equipment Technician 23.85 23080 - Aircraft Worker 22.13 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 22.13 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 25.06

II

23110 - Appliance Mechanic 23.47 23120 - Bicycle Repairer 18.93 23125 - Cable Splicer 35.71 23130 - Carpenter Maintenance 22.31 23140 - Carpet Layer 23.17 23160 - Electrician Maintenance 29.24 23181 - Electronics Technician Maintenance I 22.11 23182 - Electronics Technician Maintenance II 23.85 23183 - Electronics Technician Maintenance III 25.46 23260 - Fabric Worker 20.39 23290 - Fire Alarm System Mechanic 23.84 23310 - Fire Extinguisher Repairer 18.93 23311 - Fuel Distribution System Mechanic 25.06 23312 - Fuel Distribution System Operator 19.23 23370 - General Maintenance Worker 16.68 23380 - Ground Support Equipment Mechanic 25.06 23381 - Ground Support Equipment Servicer 20.72 23382 - Ground Support Equipment Worker 22.13 23391 - Gunsmith I 18.93 23392 - Gunsmith II 21.86

23393 - Gunsmith III 25.06 23410 - Heating Ventilation And Air-Conditioning 21.91 Mechanic 23411 - Heating Ventilation And Air Contidioning 23.20 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 24.62 23440 - Heavy Equipment Operator 24.76 23460 - Instrument Mechanic 25.06 23465 - Laboratory/Shelter Mechanic 23.47 23470 - Laborer 13.86 23510 - Locksmith 23.47 23530 - Machinery Maintenance Mechanic 24.78 23550 - Machinist Maintenance 21.33 23580 - Maintenance Trades Helper 17.46 23591 - Metrology Technician I 25.06 23592 - Metrology Technician II 26.53 23593 - Metrology Technician III 28.07 23640 - Millwright 27.15 23710 - Office Appliance Repairer 19.84 23760 - Painter Maintenance 20.81 23790 - Pipefitter Maintenance 28.84 23810 - Plumber Maintenance 26.90 23820 - Pneudraulic Systems Mechanic 25.06 23850 - Rigger 25.06 23870 - Scale Mechanic 21.86 23890 - Sheet-Metal Worker Maintenance 27.80 23910 - Small Engine Mechanic 21.86 23931 - Telecommunications Mechanic I 29.16 23932 - Telecommunications Mechanic II 30.87 23950 - Telephone Lineman 25.70 23960 - Welder Combination Maintenance 21.02 23965 - Well Driller 25.06 23970 - Woodcraft Worker 25.06 23980 - Woodworker 18.93 24000 - Personal Needs Occupations 24550 - Case Manager 12.77 24570 - Child Care Attendant 9.92 24580 - Child Care Center Clerk 12.37 24610 - Chore Aide 11.97 24620 - Family Readiness And Support Services 12.77 Coordinator 24630 - Homemaker 13.26 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 24.70 25040 - Sewage Plant Operator 22.94 25070 - Stationary Engineer 24.70 25190 - Ventilation Equipment Tender 17.16 25210 - Water Treatment Plant Operator 22.53 27000 - Protective Service Occupations 27004 - Alarm Monitor 14.71 27007 - Baggage Inspector 13.15 27008 - Corrections Officer 23.96 27010 - Court Security Officer 25.48 27030 - Detection Dog Handler 14.71 27040 - Detention Officer 23.96 27070 - Firefighter 26.35 27101 - Guard I 13.15 27102 - Guard II 14.71 27131 - Police Officer I 28.37 27132 - Police Officer II 31.52 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 12.92 28042 - Carnival Equipment Repairer 14.05 28043 - Carnival Worker 9.46 28210 - Gate Attendant/Gate Tender 14.66 28310 - Lifeguard 12.57 28350 - Park Attendant (Aide) 16.41 28510 - Recreation Aide/Health Facility Attendant 11.97

28515 - Recreation Specialist 19.55 28630 - Sports Official 13.06 28690 - Swimming Pool Operator 16.22 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 21.86 29020 - Hatch Tender 21.86 29030 - Line Handler 21.86 29041 - Stevedore I 20.72 29042 - Stevedore II 23.47 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 39.89 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.50 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.29 30021 - Archeological Technician I 17.13 30022 - Archeological Technician II 19.17 30023 - Archeological Technician III 23.73 30030 - Cartographic Technician 23.73 30040 - Civil Engineering Technician 25.99 30051 - Cryogenic Technician I 26.29 30052 - Cryogenic Technician II 29.04 30061 - Drafter/CAD Operator I 17.13 30062 - Drafter/CAD Operator II 19.17 30063 - Drafter/CAD Operator III 21.36 30064 - Drafter/CAD Operator IV 26.29 30081 - Engineering Technician I 15.26 30082 - Engineering Technician II 17.13 30083 - Engineering Technician III 19.17 30084 - Engineering Technician IV 23.73 30085 - Engineering Technician V 29.04 30086 - Engineering Technician VI 35.13 30090 - Environmental Technician 21.78 30095 - Evidence Control Specialist 23.73 30210 - Laboratory Technician 19.60 30221 - Latent Fingerprint Technician I 26.95 30222 - Latent Fingerprint Technician II 29.77 30240 - Mathematical Technician 23.73 30361 - Paralegal/Legal Assistant I 19.10 30362 - Paralegal/Legal Assistant II 23.65 30363 - Paralegal/Legal Assistant III 28.93 30364 - Paralegal/Legal Assistant IV 35.01 30375 - Petroleum Supply Specialist 29.04 30390 - Photo-Optics…