Request for Information_LTT-HC_Integration_Contracting.pdf

Request for Information (RFI)

Title: Integration of Advanced Medium Mobile Power Sources (AMMPS) Kits

Agency: Department of the Army, Army Contracting Command – Aberdeen Proving Ground (ACC-APG), Belvoir Division

RFI Number: W909MY-26-F-TRLR

NAICS Code: 336212 - Truck Trailer Manufacturing

Response Deadline: 11 MAY 2026, 3:30 p.m. Eastern Standard Time

Contact for Questions & Submissions: Contract Specialist, Mary Suda mary.a.suda.civ@army.mil and Contracting Officer, Shahaadah Nalls shahaadah.c.nalls.civ@army.mil

1. INTRODUCTION AND PURPOSE

The Department of the Army is conducting market research in accordance with Federal Acquisition Regulation (FAR) Part 10 to identify sources capable of integrating Advanced Medium Mobile Power Sources (AMMPS) Kits onto either the 1-ton Light Tactical Trailer Heavy Chassis (LTT-HC) or the 2.5-ton M200A1 trailer. The Government owns the competitive Technical Data Package (TDP) for this integration, which will be provided as Government Furnished Information (GFI) under subsequent competitive action.

This RFI is for informational and planning purposes only and does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. The Government will not award a contract on the basis of this RFI, nor will it pay for any information submitted by respondents.

2. INSTRUCTIONS FOR RESPONDENTS

Interested parties are invited to submit a capability statement that addresses the questions in Section 3.

• Format: Responses should be submitted electronically in Microsoft Word or Adobe PDF format.

• Page Limits: The "Company Overview" section (3.1) is limited to two pages. There are no page limits for the other sections.

mailto:mary.a.suda.civ@army.mil mailto:shahaadah.c.nalls.civ@army.mil

• Proprietary Information: Respondents are advised not to include proprietary or classified information. However, if a response contains information that is considered proprietary, it must be clearly marked on a page-by-page basis. The Government will handle any marked proprietary information appropriately, though its submission is at the respondent's own risk.

3. INFORMATION REQUESTED

Please provide detailed responses to the following inquiries.

3.1 Company Overview

• Company Name, CAGE Code, and UEI.

• Primary Point of Contact (Name, Title, Phone, Email).

• Company size under NAICS code 336212. Please also list any other relevant NAICS codes and your company's size under each.

3.2 Past Performance & Experience

• Describe your company’s experience with integrating electrical and mechanical systems into vehicle or trailer platforms within the last 3 years.

• Provide specific examples of past projects involving the integration of power generation equipment (such as AMMPS kits or similar systems) onto trailers. Include the customer, the type of generator, and the quantity of units produced. For each project (Government or commercial), include the project name, a brief description, and its relevance to the requirements of this RFI.

3.3 Production and Integration Capabilities

• Provide the address of the facility where assembly and integration would take place.

• What is your company's maximum monthly production capacity for this type of integration?

• Describe your facility's capacity for storing trailers and generators, including any measures taken to protect them from the elements.

• Describe your company's capabilities for coordinating the shipping of the final integrated systems to their destination. What logistics and shipping methods do you typically use?

3.4 Programmatic Information

To enable respondents to develop a Rough Order of Magnitude (ROM), the Government is providing the following component details and baseline assumptions. The scope of work includes all efforts required to procure/fabricate mounting hardware, cabling, perform mechanical and electrical integration, and test the final system.

Integration Scope: The vendor is responsible for fabricating or procuring all mounting hardware, brackets, cables, and integrating/installing these components and GFE on the trailer IAW the government’s TDP.

Performance Requirement: The final integrated system must be capable of being safely towed on primary and secondary roads and must meet standard military requirements for environmental durability (e.g., resistance to rain, dust, vibration).

3.4.1Component & System Details (Government Furnished Equipment - GFE)

• Generator: AMMPS 60kW (MEP-1070A), with approximate dimensions of 75" L x 36" W x 50" H and a dry weight of 2,200 lbs. (this represents the largest generator). For all other equipment requiring integration see Appendix 1 below.

• Trailers:

• LTT-HC (1-Ton): Flat deck with approximate usable space of 96" L x 74" W.

• M200A1 (2.5-Ton): Chassis that will require a vendor-supplied flat deck or mounting platform. Approximate chassis length of 144".

• Detailed information is available in MIL-STD-633G, accompanying this solicitation.

3.4.2 Cost Estimate Instruction

Provide a Rough Order of Magnitude (ROM) cost estimate per system for the integration of

1) a PP-3106A Power Plant, and 2) a PU-2001A Power unit (reference appendices and MIL- STD 633G for clarifying information). This represents the most complex and least complex efforts, respectively. These estimates should be broken-down as follows:

• Non-Recurring Engineering (NRE) Cost (as a delineated cost from total cost, break down as desired for additional information).

• Recurring Per-Unit Production Cost (for each of the 50 units).

• Include a brief Basis of Estimate (BOE) explaining the methodology and assumptions used to derive your figures (e.g., estimated labor hours, material types).

• Describe any potential for cost savings or discounts based on volume (e.g., for orders of 10, 50, or 100+ units per month).

• Estimate lead time, from receipt of order, to begin initial production.

3.4.2.1 Assumptions:

• All GFE (generators, trailers with accessory boxes) will be delivered to the vendor's facility.

• The vendor is responsible for all non-recurring engineering (NRE) associated with designing the integration solution (e.g., drawings, analysis, tooling) to meet the performance requirements.

• The ROM should be based on an assumed production quantity of 50 units/system.

• The vendor is responsible for all labor, materials, and testing (e.g., factory acceptance test) required for the integration.

3.5 Engineering and Security

• Describe your company's engineering capabilities as they relate to mechanical and electrical integration.

• What quality control and inspection processes do you have in place to ensure compliance with a government-provided TDP?

• What is your company's current facility security clearance level?

3.6 Additional Information

Please provide any supplemental information that supports your company’s ability to meet the requirements of this RFI. This may include commercial literature or information on human factors, engineering, safety, or other relevant topics.

Appendix 1: Total candidate systems for Integration

This lists the full potential workload of trailer/generator combinations of candidate workloads. Additional details are available in the provided MIL-STD-633G.

AMMPS A-Model NSNs Model Description NSN LIN

MEP-1030A Generator Set, AMMPS 5kW 50/60Hz 6115-01-679-2558 G42488

MEP-1031A Generator Set, AMMPS 5kW 400Hz 6115-01-679-3637 Not requested MEP-1040A Generator Set, AMMPS 10kW 50/60Hz 6115-01-679-5145 G07461 MEP-1041A Generator Set, AMMPS 10kW 400Hz 6115-01-679-5196 G75018 MEP-1050A Generator Set, AMMPS 15kW 50/60Hz 6115-01679-5596 G49966 MEP-1051A Generator Set, AMMPS 15kW 400Hz 6115-01-679-5204 G74950 MEP-1060A Generator Set, AMMPS 30kW 50/60Hz 6115-01-679-5442 G75200 MEP-1061A Generator Set, AMMPS 30kW 400Hz 6115-01-679-4745 G62710 MEP-1070A Generator Set, AMMPS 60kW 50/60Hz 6115-01-679-4747 G63256 MEP-1071A Generator Set, AMMPS 60kW 400Hz 6115-01-679-4754 G62960 PU-2001A Power Unit, AMMPS LTT 5kW, 50/60Hz 6115-01-680-2376 L26934 PU-2002A Power Unit, AMMPS LTT 10kW, 50/60Hz 6115-01-680-2060 L84622 PU-2012A Power Unit, AMMPS LTT 10kW, 400Hz 6115-01-680-2283 L84758 PU-2003A Power Unit, AMMPS LTT 15kW, 50/60Hz 6115-01-680-2322 L84690 PU-2101A Power Unit, AMMPS M200A1, 15kW, 50/60Hz 6115-01-680-1076 T40090 PU-2111A Power Unit, AMMPS M200A1, 15kW, 400Hz 6115-01-680-1252 T40022 PU-2102A Power Unit, AMMPS M200A1, 30kW, 50/60Hz 6115-01-680-1168 T39954 PU-2112A Power Unit, AMMPS M200A1, 30kW, 400Hz 6115-01-680-2318 T93300 PU-2103A Power Unit, AMMPS M200A1, 60kW, 50/60Hz 6115-01-680-2046 T60034 PU-2113A Power Unit, AMMPS M200A1, 60kW, 400Hz 6115-01-680-1182 T93368 PP-3001A Power Plant, AMMPS LTT, 5kW 50/60Hz 6115-01-681-7740 L27002 PP-3101A Power Plant, AMMPS M200A1, 5kW 50/60Hz 6115-01-681-6977 L27070 PP-3102A Power Plant, AMMPS M200A1, 10kW 50/60Hz 6115-01-682-0892 T39849 PP-3003A Power Plant, AMMPS 2 LTT, 15kW 50/60Hz 6115-01-681-5689 T49579 PP-3105A Power Plant, AMMPS 2 M200A1, 30kW 50/60Hz 6115-01-682-0842 T39917 PP-3106A Power Plant, AMMPS 2 M200A1, 60kW 50/60Hz 6115-01-682-0823 T93232

AMMPS Microgrid NSNs Model Description NSN ZLIN

MG-5106 Power Plant, Electrical Microgrid MG-5106, Two M200A1 Trailer Mounted, 120 Kw, 50/60Hz 6115-01-666-7896 Z05741

Appendix 2: Select MIL-STD 633G excerpts

NOTE: Find number 1-4 are GFE. Only fasteners are required to integrate.

PP-3106 – AMMPS Power Plant, 60 kW, 50/60 Hz

PP-3106 – AMMPS Power Plant, 60 kW, 50/60 Hz

NOTE: Find Number 1-4 are provided GFE. 5-7 must be