Reno Boiler Water Heater Maintenance Services Scope of Work.pdf

PDF 241 KB Posted

Attached to
Reno - Boiler & Water Heater Maintenance Service
Solicitation number
43ADG-S4086
Issued by
Washoe County, Nevada

About this file

This is a Scope of Work document from the State of Nevada, Office of the Military, for boiler and water heater maintenance services in Reno. The State is soliciting bids from qualified contractors to provide as-needed services including routine maintenance and inspections, emergency repair services, installation of boiler units and components, diagnostic services, troubleshooting, and cleaning and maintenance. Services will be provided on an as-needed basis with no guarantee of specific funding amounts annually. The project encompasses seven facilities across the Reno area, including the Plumb Lane Armory, Field Maintenance Shop, Washoe County Armory Training Center, Washoe County Armory, OSA Flight Detachment 45, Army Aviation Support Facility, and Camp Washoe. A bid walk is scheduled for December 3rd from 8:00 AM to 10:00 PM at 20000 Army Aviation Drive, Reno, Nevada, with Jarrod Carpenter serving as the point of contact. Proposal submission is due by the date specified in NevadaEPRO.

Bidders must submit hourly rates, overtime rates, holiday rates, and itemized fees for facility charges, drive time, and travel time. Proposals must include a copy of the contractor's license, State of Nevada business license, contact information, and proof of liability and workers' compensation insurance naming the Office of the Military as certificate holder. Vendors must be registered with the State of Nevada and utilize electronic transfer for payment. The scope encompasses comprehensive services including initial system assessment and installation, routine maintenance and repairs, testing and reporting with ASME CSD-1/NAC 455C test certificates and combustion analysis reports, pressure switch calibration, client training and handover, and emergency on-call services. No set-aside is identified in this document.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Attachment AA

State of Nevada, Office of the military Facilities Maintenance

Scope of Work Summary

Date: November 16, 2026 Project: RENO – Boiler & Water Heater Maintenance Services

General Intention: This scope of work is intended to include all the work required to complete the project described below. Contractors who submit bids are required to include and disclose in their bid all work deemed necessary to complete the project.

Task(s):

The State of Nevada, Office of the Military, is seeking bids/proposals from qualified contractors to provide as-needed services for the following boiler and water heater services: Routine maintenance and inspections of boiler systems emergency repair services, installation of boiler units and components, diagnostic services and troubleshooting, improvement solutions, cleaning and maintenance. All work conducted will be on an as-needed basis with no guarantee of specific funding amounts each year. The geographical locations that you are willing to serve must be specified in your bid proposal. The Office of the Military is currently seeking bids for the following location: Reno

Scope of Work:

The scope of work for boiler and water heater services encompasses a comprehensive range of tasks aimed at ensuring safety, energy efficiency, and a prolonged operational lifespan.

Initial Assessment & Installation

• Initial Assessment: Evaluation of existing boiler and water heater systems to determine current efficiency and compliance with local regulations.

• System Installation: Installation of new boiler and water heater units, including all necessary piping and associated components, ensuring proper sizing and configuration for maximum efficiency.

Routine Maintenance & Repair

• Ongoing maintenance and repair services extend to all units and their associated external components, including but not limited to:

o System checks: Water level and pressure checks, low water cut off testing, thermostat calibration, and external visual inspections.

o Boiler-Specific Care: heat exchanger cleaning, de-airing/bleeding radiators, and inspecting, cleaning, and servicing flues and venting systems.

o Water heater-Specific Care: Tank Flushing, anode rod inspections, and Temperature and Pressure

(T&P) valve testing.

o Safety & component Testing: Burner and pilot assembly cleaning, gas line and valve leak checks, and comprehensive electrical component testing.

Testing & Reporting

• ASME CSD-1/NAC 455C Test Certificates o Completed and signed safely inspection sheets for all units.

• Combustion Analysis Reports o Digital analyzer printouts (initial and final at low, mid, and high fire) affixed to each boiler jacket and compiled in a master closeout binder.

• Deficiency & Capital Replacement Log o Written documentation of observed piping wear, pump seal degradation, or potential future mechanical liabilities.

• Analyzer Supplies o Calibrated combustion analyzer sensor cells, test printer paper, and zero-calibration gas.

• Pressure Switches o Test and calibrate high and low gas pressure switches, blocked flue switches, and combustion air proving differential pressure switches.

o Perform baseline combustion test at high and low fire; log baseline O2, CO2, CO, stack temperature, and combustion efficiency.

o Complete multi-point combustion analysis across the entire firing range (low-fire, mid-fire, high-fire).

• Adjust fuel-air ratio control valves to achieve factory operational envelopes

Client Training & Handover

• With any installation or major servicing, the service provider will conduct a comprehensive walkthrough and training session for facility maintenance team. This training will cover but limited to:

o Sequence of Operations: Detailed walkthrough of system startup, shutdown, and seasonal changeover procedures.

o Controls & Automation: Training on the control interface, thermostat/sensor calibration, and integration with any building automation systems if applicable.

o Preventative maintenance Logistics: Procedures for routine maintenance tasks, including monitoring system pressure, testing low-water cut-offs, and verifying safety valves.

o Diagnostics & Emergency Protocols: Troubleshooting common fault codes managing minor system errors and executing critical emergency shut-off protocols.

The Contractor shall be available to provide emergency and on-call services to address urgent repair requests necessary to maintain mission-critical operations and facility safety. The Contractor must be capable of providing an expedited response for critical failures. For any deficient conditions observed during the performance of work that exceeds the original service request, the Contractor shall document and report them to the Office of the Military/Facility Supervisor with recommended corrective actions prior to proceeding. The provision of parts, materials, and chemicals, as well as purchasing from the Contractor shall also be included.

Comprehensive documentation, including service reports and maintenance logs, will be provided to ensure transparency and accountability. All services will adhere to industry standards and local codes to guarantee safety and reliability.

Proposals Should Include:

• Contact person email and telephone number for service inquiries.

• Hourly rates, overtime rates, and holidays; and any fees such as but not limited to the facility, drive time, Travel time, etc. All fees the vendor wants to bill MUST be broken down and listed in their proposal.

• A copy of Contractors License.

• A copy of your State of Nevada Business License. (This is the license you get from the Nevada Secretary of

State’s office.)

Bid walk Schedule:

• Date: December 3rd

• Time: 8am-10pm

• Point of Contact: Jarrod Carpenter 775-690-9105. Please give Jarrod a call when you are on site.

• Meeting location: 20000 Army Aviation Drive Reno, NV 89506

Proposals Due By:

Proposal are due by date shown in NevadaEPRO

Conditions:

Existing/ongoing army military operations/facilities

Location: Reno

End of Summary

Instructions to bidders: The following documents are required prior to contract approval: State of Nevada business license. Vendor must provide proof of liability and workers’ compensation insurance. The certificates must name the Office of the Military, its officers, employees, and immune contractors as defined in NRS 41.0307 as the certificate holder. Vendors must be registered vendors with State of Nevada. Vendor must use electronic transfer for payment.

Region Building Name Address City State Zip 1 Plumb Lane Armory 685 E. Plumb Lane Reno NV 89506 1 Field Maintenance Shop (FMS A&B) 19960 Army Aviation Drive Reno NV 89506 1 Washoe County Armory Training Center (WCATC) 19970 Army Aviation Drive Reno NV 89506 1 Washoe County Armory (WCA) 19980 Army Aviation Drive Reno NV 89506 1 OSA Flight Detachment 45 (C12) 19990 Army Aviation Drive Reno NV 89506 1 Army Aviation Support Facility (AASF) 20000 Army Aviation Drive Reno NV 89506 1 Camp Washoe (Navy Building) 4601 Cocoa Ave Reno NV 89506

NORTHERN NEVADA

Scope of Work Summary

File details come from the government source that posted it. Updated .