R-47153-Airplane Engine-Specs for Bid.docx

ILLINOIS STATE POLICE

SPECIFICATIONS FOR LYCOMING FACTORY REBUILT ENGINE

I. Illinois State Police (ISP) specific duties

A. will deliver airplane to successful bidder B. will deliver engine to be used as the core exchange Lycoming IO-540-AB1A5, Serial Number RL-25500-48E.

II. Qualifications

A. this engine and all accessories are to be in compliance with all current airworthiness directives, manufacture’s service bulletins and service letters B. mechanics who perform this work shall be certified in accordance with Federal Aviation Regulations (CFR Title 14 Chapter 1 Part 65) C. all work and logbook entries should be completed in accordance and compliance with Federal Aviation Administration Regulations (CFR Title 14 Chapter 1 Part 43) D. manufactures recommended engine break in procedures shall be provided to the ISP at the time of pick up.

III. Specifications

A. one (1) Lycoming factory rebuilt, with zero time engine logbook, 2000-hour time between overhauls (TBO), IO-540-AB1A5, 230 rated horsepower aircraft engine for a 2000 Cessna 182S airplane. Registration and serial number available upon request B. the bid will include the removal of the existing engine and accessories as necessary C. the installation of the factory rebuilt engine and accessories at the successful vendor’s place of business D. bid will include all costs including all related shipping costs for items specified and those items normally included with this type of installation E. the Lycoming IO-540-AB1A5 engine, Serial Number RL34645-48E, removed from the aircraft will be turned over to the ISP for removal from the successful bidder’s place of business F. factory rebuilt engine order should be placed by the successful bidder for an expected delivery no later than mid November 2019. The current engine is expected to reach time between overhauls (TBO) in November 2019 G. the Cessna 182s airplane will be delivered in and shall be returned to service in airworthy condition

H. all warranty information on the engine and its accessories is to be included with the engine.

I. the maintenance shop will provide additional information pertaining to a warranty on labor.

IV. Directions

A. items to be exchanged

i. engine and all included accessories

ii. starter and hub assembly

iii. oil cooler.

B. items to be removed from the airplane, overhauled and reinstalled with the rebuilt engine

i. propeller

ii. propeller governor.

C. Items to be installed new

i. spark plugs

ii. oil pump

iii. oil and oil filter

iv. ignition wire harness

v. engine mount bolt

vi. engine rubber lord mounts

vii. induction air filter

viii. alternator drive belt

ix. all flexible fuel, oil, air, vacuum hoses and lines

x. all miscellaneous hardware/items firewall forward related to the engine installation not specified.

D. the following accessories are to be removed from the core engine and reinstalled on the factory built engine

i. vacuum pumps

ii. alternator

iii. insight graphic engine monitor related items

iv. tannis engine heater.