RFQ 11-1435 Matting 0765.docx

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

1 | 37

UNDER BDSA REG. 2

RATING

GSA, FAS, Southwest Operations Supply Center, Acquisition Division (QSDLAA-A5) 819 Taylor Street, Room 6A00 Fort Worth, TX 76102-6105 15 Days ARO

Best Delivery Time: Days ARO

(See Schedule)

NUMBER

850-8388

574-2615 (FAX)

9. DESTINATION

To be shown on each order issued.

(See Schedule)

c. STREET ADDRESS

c. CITY

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5A ON OR

BEFORE CLOSE OF BUSINESS (Date) Wednesday, September 20, 2011 (1:00 PM Central Time) IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5A. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

( c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

A. This is a Request for Quote (RFQ) for a Standing Quote Agreement (SQA) for a three-year period, or more, from DATE OF AWARD, not to exceed five years or $150,000, with annual reviews. Any request for a price increase will be a matter of negotiation during the annual review. If the SQA reaches the $150,000 before the end of the three years, the agreement will be cancelled in its entirety at no cost to either party.

B. ONLY offers of domestic items will be considered IAW clause 52.225-1.

C. A First Article Test IS required; however, may be waived when item identical or similar has previously been accepted by the government. See Section H.

C. The requirements listed are estimates only and no guarantee is given as to the dollar amount to be purchased.

D. Award will be made in the aggregate to the offeror who represents the best value to the Government utilizing the following evaluation factors: technical acceptability, past performance, and price. Pricing must be submitted for both depot locations to be considered for award.

E. Inspection will be at Destination. Award will be FOB Destination.

F. The Item Purchase Description and Schedule of Items are shown on pages 5 through 6.

G. Required Clauses, applicable to all items in this Request for Quotation, are shown on pages 6 through 37.

H. This is only a request for pricing. Delivery orders will be issued pursuant to the evaluation of the quotations received. DO NOT SHIP.

I. When responding to this Request for Quotation, complete and return the entire package. If you “No Quote,” please indicate and return page 1 only.

12. DISCOUNT FOR PROMPT PAYMENT

NOTE: Additional provisions and representations |X| are |_| are not attached.

c. COUNTY

PHONE

QSDLAA-A5-11-1435-SQ

Schedule of Items

Use the Schedule of Items on page 4 to submit your quoted prices. Provide the unit prices per the unit of issue shown.

A. FOB is DESTINATION.

B. The Item Purchase Description(s) (IPDs) for National Stock Number (NSN) 7220-00-255-0765, Matting, can be found on pages 5 through 6.

C. When responding to this RFQ, you may submit the entire document via fax (817) 574-2615 or PREFERABLY by email to lori.herrera@gsa.gov. The full document and all supporting documentation must be received by the closing date and time. The following address can be used to submit your offer by mail:

Attn: Lori Herrera (QSDLAA-A5) 819 Taylor St. Rm6A00 Fort Worth, TX 76102-6105

D. FAR 52.212-1, Instructions to Offerors – Commercial Items (JUN 2008)(FAR12.301(b)(1), is incorporated by reference. Tailor the clause in paragraph (b), Submission of Offers, to specify the requested information needed pertaining to the commitment letter and product literature. See item F. (3) Commitment Letters below.

Paragraph (h), “Multiple awards.” is replaced with a “Single award agreement.” to be issued as a result of this RFQ. Replace the entries showing “SF 1449” references with “SF 18” references for this RFQ.

E. Evaluation Factors: Award will be made in the aggregate to the offeror who represents the best value to the Government utilizing the following evaluation factors: technical acceptability, past performance, and price. Only those quotes that are determined technically acceptable will be evaluated for the past performance and price factors. Past performance and price are approximately equal in importance. As offers become more equal in non-price factors, the total price becomes more important.

(2) Past Performance: Past performance is evaluated as an indicator of an offeror’s ability to perform the contract successfully. Past performance evaluation is accomplished as pass/fail assessment rating based on accessing offeror’s past performance history. GSA may use any credible information available on the contractor, or any of its proposed subcontractors, including GSA’s own experience with the contractor, in evaluating past performance. The Government will also use the Past Performance Information Retrieval System (PPIRS), if reports exist for the offeror. The website for PPIRS is www.ppirs.gov. An offeror with no record of past performance of the same general nature or for whom GSA has no information available, is not evaluated favorably or unfavorably on past performance, but will be given a neutral rating.

(3) Lowest Evaluated Price: Pricing will be evaluated based on the item’s total price submitted in the block titled “Total Standing Quote Price” in the schedule of items on page 4.

F. SUPPLEMENTAL DOCUMENTATION REQUIRED (FAR 52.212-1(b) Clause as follows.)

(1) Sample. A sample of the product you are offering may be requested, if necessary. Please have a sample available for overnight delivery if needed for evaluation purposes.

(2) List of Exceptions. If exceptions are being taken to any characteristic listed in the attached IPD(s) or requirements listed in this solicitation, a full explanation of the exception must accompany the response of this request for quotation.

(3) Commitment Letters. If the offeror is not the manufacturing production and/or inspection point, please provide a letter of commitment from each manufacturing production and inspection point. The commitment letter(s) must be a typed original on the supplier’s letterhead, dated, and have as a minimum, the following:

6. A statement that the supplier will provide you the entire 1-year quantity and can meet the estimated peak monthly requirement within the delivery time required of 15 days ARO or better;

7. A statement as to the country of origin of the item;

8. The commitment letter must include an original signature on the supplier’s letterhead, title of the signee, a direct telephone number and e-mail address.

Failure to provide any of the requested information or documents may cause your offer to not be considered for award.

G. The following is how you can obtain specifications:

FED Specs – GSA Federal Supply Service Specifications Section, Ste. 8100, 470 E. L’Enfant Plaza, SW, Washington, DC 20407 [Telephone 202-619-8925, Fax 202-619-8978] http://assist.daps.dla.mil/online/start/ Click on “Quick Search” (left side of screen). Type the document in the “Document ID” field and hit submit. You do not need a password.

MIL Specs – Department of Defense Single Stock Point (DoDSSP), Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5094 [Telephone 215-697-2667/2179, Fax 215-697-1462] Web Site www.dsp.dla.mil Click on “Online Specs” or http://assist.daps.dla.mil.online/start/ Click on “Quick Search” (left side of screen). Type the document in the “Document ID” field and hit submit. You do not need a password.

ANSI Standards – American National Standards Institute, Inc., 11 West 42nd Street, 13th Floor, New York, NY 10036 [Telephone 212-642-4900]

ASTM – American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 [Telephone 610-832-9585, Fax 610-832-9555] Web Site: www.astm.org, email: service@astm.org. (ASTM does charge for their services.)

Recycled Material – Two sites for information related to the Comprehensive Procurement Guidelines and Recovered Materials Advisory Notices: www.epa.gov/cpg.

Commercial Item Descriptions – http://assist.daps.dla.mil/online/start/ Click on “Quick Search” (left side of screen). You do not need a password.

H. METHOD OF AWARD – Award will be made in the aggregate to the offeror who represents the best value to the Government utilizing the following evaluation factors: technical acceptability, past performance, and price. The low offeror will be determined by multiplying the unit price submitted on each item by the quantity specified, and adding the resultant extensions. In order to qualify for an award, prices must be submitted for each delivery point. To be technically acceptable, the item must meet or exceed the Item Purchase Description(s) located on Pages 5-6.

NOTE****FAILURE TO PROVIDE ALL REQUIRED DOCUMENTATION AT TIME OF OFFER MAY RESULT IN YOUR OFFER NO LONGER BEING EVALUATED OR CONSIDERED FOR AWARD. PRODUCT SPECIFICATION SHEETS AND COMMITMENT LETTERS ARE REQUIRED WITH YOUR OFFER.

_____________________________________Schedule of Items ___________________________________

1a/1b National Stock Number (NSN) 7220-00-255-0765, Matting;

(NAICS 326192) (750 Employees) PROVIDE SPECIFICATION SHEET(S) WITH OFFER.

Item No.

Destination

3-YEAR STANDING QUOTE

Orders (1-Year) Est’d Peak Monthly Req’t Est’d 1-Year QTY

1a

BURLINGTON, NJ (N3)

NSN: 7220-00-255-0765, Matting IPD Attached

1b

FRENCH CAMP, CA (S3)

NSN: 7220-00-255-0765, Matting IPD Attached

Request for Quotation # QSDLAA-A5-11-1435-SQA Dated 09/13/2011

· Taxpayer Identification Number (TIN): _____________________

· Data Universal Numbering System (DUNS): ______________________

· Name of Contact: ______________________

· E-Mail Address: _______________________

· Phone Number: _______________________

· Fax: __________________________

· Supplier Name*: ___________________________

· Name of Contact*: __________________________

(*Note: “Supplier” refers to the company providing you the product, if you are not the manufacturer.)

ITEM PURCHASE DESCRIPTION

NSN: 7220-00-255-0765

MATTING, FLOOR: Shall be in accordance with MIL-DTL-15562G dated May 31, 1996 with the following characteristics:

Type II - runner type, smooth surface Length - 25 yards Thickness - 0.125 inches minimum Width - 24.0 inches Color - black

Unit of issue - RO (roll twenty five (25) yards in length)

FIRST ARTICLE: A first article inspection is required in accordance with paragraph 3.1 of the specification.

EXCEPTIONS TO THE SPECIFICATION:

Paragraph 3.5 Line 2 Delete “plus or minus 3.0 yards.”

Add “minus 1/2 yard, any plus tolerance acceptable.”

Paragraph 3.5 Add “All rolls shall be tagged showing the exact number of yards in that roll.”

OPTIONAL REQUIREMENT: Plastic mats manufactured with 10 to 100 percent postconsumer content and 100 percent recovered materials (as specified by the EPA Comprehensive Guideline for Procurement of Products Containing Recovered Materials; Recovered Materials Advisory Notice III; Final Rule (40 CFR Part 47), Federal Register/ Vol. 65, N0. 12/Wednesday, January 19, 2000/Rules and Regulations) shall be given preference in contract award per GSA Order OGP 2581.1.

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed in accordance with the latest revision of ASTM D 3951, Standard Practice for Commercial Packaging. Copies of ASTM standards are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. Phone: 610-832-9585, Fax: 610-832-9555, Web site: www.astm.org, e-mail: service@astm.org.

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

Palletization: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp and Stockton Locations). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.

Stacking: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.

Materials: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.

Unitization: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.

Unitization of pallet load: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

END OF ITEM PURCHASE DESCRIPTION

Section CI Commercial Item Section

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

The IBR clauses (clauses incorporated by reference) are now accessible on-line. The address for the FAR is http://www.arnet.gov.far and the address for GSAM is http://www.arnet.gov/GSAM/gsam.html .

THE FOLLOWING CLAUSES ARE INCORPORATED BY REFERENCE:

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

52.214-34 SUBMISSION OF OFFERS IN THE ENGLISH LANGUAGE (APR 1991)

52.214-35 SUBMISSION OF OFFERS IN U.S. CURRENCY (APR 1991)

52.222-38 COMPLIANCE WITH VETERANS' EMPLOYMENT REPORTING REQUIREMENTS (SEP 2010)

552.223-70 HAZARDOUS SUBSTANCES (MAY 1989)

552.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (SEP 1999) (Deviation FAR 52.252-6) (Applicable)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS–COMMERCIAL ITEMS (AUG 2011)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)).

[*_______*] Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2010) (Pub. L. 109-282) (31 U.S.C. 6101 note).

__ (5) 52.204-11, American Recovery and Reinvestment Act—Reporting Requirements (Jul 2010) (Pub. L. 111-5).

X (6) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Dec 2010) (31 U.S.C. 6101 note).

__ (7) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (MAY 2011) (section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161).

__ (8) 52.219-3, Notice of Total HUBZone Set-Aside or Sole-Source Award (Jan 2011) (15 U.S.C. 657a).

X (9) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JAN 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (10) [Reserved]

X (11)(i) 52.219-6, Notice of Total Small Business Set-Aside (June 2003) (15 U.S.C. 644).

__ (ii) Alternate I (Oct 1995) of 52.219-6.

__ (iii) Alternate II (Mar 2004) of 52.219-6.

__ (12)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

__ (ii) Alternate I (Oct 1995) of 52.219-7.

__ (iii) Alternate II (Mar 2004) of 52.219-7.

__ (13) 52.219-8, Utilization of Small Business Concerns (Jan 2011) (15 U.S.C. 637(d)(2) and (3)).

__ (14)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2011) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Oct 2001) of 52.219-9.

__ (iii) Alternate II (Oct 2001) of 52.219-9.

__ (iv) Alternate III (Jul 2010) of 52.219-9.

__ (15) 52.219-14, Limitations on Subcontracting (Dec 1996) (15 U.S.C. 637(a)(14)).

__ (16) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

__ (17)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer).

__ (ii) Alternate I (June 2003) of 52.219-23.

__ (18) 52.219-25, Small Disadvantaged Business Participation Program—Disadvantaged Status and Reporting (Dec 2010) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

__ (19) 52.219-26, Small Disadvantaged Business Participation Program— Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

__ (20) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (May 2004) (15 U.S.C. 657 f).

__ (21) 52.219-28, Post Award Small Business Program Re-representation (Apr 2009) (15 U.S.C. 632(a)(2)).

__ (22) 52.219-29 Notice of Total Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Apr 2011).

__ (23) 52.219-30 Notice of Total Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Apr 2011).

X (24) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

X (25) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jul 2010) (E.O. 13126).

X (26) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).

X (27) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

X (28) 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212).

X (29) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793).

X (30) 52.222-37, Employment Reports on Veterans (SEP 2010) (38 U.S.C. 4212).

__ (31) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

__ (32) 52.222-54, Employment Eligibility Verification (JAN 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

__ (33) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (34) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b).

__ (35)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (DEC 2007) (E.O. 13423).

__ (ii) Alternate I (DEC 2007) of 52.223-16.

X (36) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) (E.O. 13513).

__ (37) 52.225-1, Buy American Act—Supplies (Feb 2009) (41 U.S.C. 10a-10d).

__ (38)(i) 52.225-3, Buy American Act—Free Trade Agreements—Israeli Trade Act (June 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, and 110-138).

__ (ii) Alternate I (Jan 2004) of 52.225-3.

__ (iii) Alternate II (Jan 2004) of 52.225-3.

__ (39) 52.225-5, Trade Agreements (AUG 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (40) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (41) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

__ (42) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

__ (43) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

__ (44) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

X (45) 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration (Oct 2003) (31 U.S.C. 3332).

__ (46) 52.232-34, Payment by Electronic Funds Transfer—Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332).

__ (47) 52.232-36, Payment by Third Party (Feb 2010) (31 U.S.C. 3332).

__ (48) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

X (49)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

__ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

__ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

__ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act—Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act—Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

__ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (Nov 2007) (41 351, et seq.).

__ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services—Requirements (Feb 2009) (41 U.S.C. 351, et seq.).

__ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247).

__ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records—Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).

(ii) 52.219-8, Utilization of Small Business Concerns (Dec 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) [Reserved]

(iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

(v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212).

(vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793).

(vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

(ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)).

___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

(xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.).

(xii) 52.222-54, Employment Eligibility Verification (JAN 2009).

(xiii)52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

Section D Packaging and Marking