7510-01-590-1500.doc

ITEM PURCHASE DESCRIPTION

General Services Administration

7510-01-590-1500 UI: EA

CARTRIDGE, TONER

DESCRIPTION

ITEM NAME

CARTRIDGE, TONER (OEM COMPATIBLE, AbilityOne)

IAW

AB1 PN 7510-00-NIB-1800

COMPATIBLE WITH

HEWLETT PACKARD PN Q5942X

CARTRIDGE TYPE

NEW PARTS AND RECOVERED PARTS

SPECIAL FEATURES

HIGH YIELD CARTRIDGE FOR USE WITH HP COLOR

LASERJET 4250, 4250dtn, 4250dtnsi, 4250n, 4250tn, 4350, 4350dtn, 4350dtnsi, 4350n and 4350dtn. PRINTERS AND ALL

OTHERS THAT USE HP P/N Q5942X

COLOR

BLACK

YIELD

42,000 PAGES (AVERAGE YIELD IAW ISO/IEC 19752)

This toner cartridge utilizes 37% post consumer recycled content by weight. The toner cartridge utilizes a new toner casing.

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

STORAGE INSTRUCTIONS: To maximize the life of the laser printer toner cartridges, it is highly recommended that this item be stored between 5 to 32.2 Deg. C (41 to 90 Deg. F) and between 10 to 90% relative humidity (temperature/humidity controlled conditions).

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

Printed on: 8/29/2014, 2:50:40 PM Page 3

_1126594845.doc