QASP_RoboticArm.docx
DOCX document 17 KB Posted
- Attached to
- Yaskawa Motoman 6-Axis Robotics - RFQ Due 08/28 - Extension Federal contract opportunity
- Solicitation number
- W15QKN-20-0086
About this file
This Quality Assurance Surveillance Plan outlines performance requirements for a Motoman 6-Axis Robotic Manufacturing Cell contract. Key requirements include the contractor possessing certifications for repair and maintenance of modern machine tools, fully installing and operationalizing the robotic cell within estimated costs, and completing mandatory training, accident/incident reporting, signed non-disclosure agreements, and an operator's manual. Performance will be monitored by the Contracting Officer's Representative and technical point of contact, with compliance for acceptance, cost, and deliverables measured at the 100% level. Non-compliance may result in the performance level being found exceeded, met, or partially met.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Temp Enc 2 - FAR 52.204-26.docx | DOCX document | |
| Temp Enc 1 - Federal Register 2020-15293.pdf | ||
| Temp Enc 3 - FAR 52.204-24.docx | DOCX document | |
| Attachment 0001 - Quality Assurance Requirements.pdf | ||
| Attachment 0004 - Non-Disclosure and Non-Use Agreement.doc | DOC document | |
| W15QKN20Q0086- Motoman Request for Quote (8-4-2020).pdf | ||
| Attachment 0005 - Additional Solicitation Requirements.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Quality Assurance Surveillance Plan (QASP) for Motoman 6-Axis Robotic Manufacturing Cell
| Performance Requirements |
| Performance |
Measure Performance Standard
Acceptable Performance Level
(APL)
Method of Surveillance Compliance (Exceeded, Met or Partially Met)
| 4 Requirements |
| Quality |
Completeness
Cost Contractor shall be knowledgeable in the repair and maintenance in all types of modern machine tools and show certifications of manufacturer specific training and/or experience of the responsible employees.
The system will be install and by fully operational, upon installation of hardware.
Satisfactory completion of all tasks within or below the estimated cost.
Training certs for mechanical and electrical personnel
No deviation
No cost overages.
100% inspection by COR and technical POC. Review of final payment voucher.
5.2, 5.4, 5.8, 9 Mandatory Training AT Level 1, iWATCH, and OPSEC Training
CDRL A001
Completeness
| Report from the contractor 30 days after contract award and annually thereafter. |
| 100% compliance |
| Received and tracked by COR |
Accident/ Incident Report
CDRL B003
Completeness
| Contractor shall submit completed Accident/Incident reports immediately or within 3 calendar days of any incident. |
| 100% compliance |
| Received and tracked by COR |
9 Non-Disclosure Agreements
CDRL A002
Completeness
| Contractor shall submit signed Non-Disclosure agreements within 30 days of contract award |
| 100% compliance |
| Received and tracked by COR |
5.3, 5.5 Installation access & security policies/ procedures
| Completeness |
| Contractor shall report all incident reporting. As received. |
COR in coordination with the installation & organization operations office.
| 100% compliance |
| Received and tracked by COR |
4.4.3, 9 Operator’s Manual
CDRL A004
| Completeness |
| Contractor shall provide an Operator’s Manual that includes the necessary information regarding the LDM upgrade. |
| 100% Compliance |
| Received and tracked by COR |
File details come from the government source that posted it. Updated .