QAP-C16.09-5 (F34).pdf

C16.09-5 TURBINE FUEL, AVIATION (F34) WITH OR WITHOUT FUEL SYSTEM ICING INHIBITOR (FSII), CORROSION INHIBITOR/LUBRICITY IMPROVER (CI/LI), AND STATIC DISSIPATER ADDITIVE (SDA) (DLA ENERGY

NOV 2015)

(a) U.S. LOCATIONS ONLY. Aviation turbine fuel, Jet A-1 (JA1), shall conform to ASTM D1655.

(b) ALL OTHER LOCATIONS. Aviation turbine fuel shall conform to the Defence Standard 91-91 Issue 7, Amendment 3, dated 2 February 2015.

NATIONAL STOCK NUMBER PRODUCT NOMENCLATURE DLA ENERGY PRODUCT CODE

9130-01-545-8464 Turbine Fuel, Aviation F34

(c) ADDITIVE REQUIREMENTS (The Contractor shall furnish and inject the following additives, as required by contract or contract line item). Additives shall not be premixed with other additives before injection into the fuel so as to prevent possible reactions among the concentrated forms of different additives.

(1) Corrosion Inhibitor/Lubricity Improver (CI/LI) additive, in accordance with MIL-PRF-25017H w/ Amendment 1, dated 4 August 2011, shall be added of the type and concentration cited in QPL-25017. To locate this information:

(1) Go to the Acquisition Streamlining and Standardization Information System (ASSIST) QuickSearch website (URL http://quicksearch.dla.mil/), (2) type "QPL-25017" in the Document ID field, press the Search button, (3) click the QPL-25017 search result under Document ID, (4) click the "Qualification" link under Overview, and (5) click the “MIL-DTL-25017 CATEGORY 1” link under Govt Designation. The concentration range for each additive is listed under the “Source Notes” link under the far right column of the table.

Only the following CI/LI additives are approved for shipment to North Atlantic Treaty Organization (NATO) countries:

CI/LI

CONCENTRATION,

GRAMS/CUBIC METER

Innospec Fuel Specialties, LLC DCI-4A 9 – 24 Innospec Fuel Specialties, LLC DCI-6A 9 – 15 Nalco Co, Nalco 5403 12 – 23 Nalco Co, Nalco 5405 11 – 11 Baker Petrolite, Tolad 4410 9 – 23 Baker Petrolite, Tolad 351 9 – 24 Dorf Ketal Chemicals, Unicor J 9 – 23 GE Betz Inc, Spec-Aid 8Q22 9 – 24

NOTE: HITEC 580, listed as approved in AFLP 3390 Edition A Version 1, has been de-commercialized.

(2) Fuel System Icing Inhibitor (FSII) Diethylene Glycol Monomethyl Ether (DiEGME), in accordance with MIL- DTL-85470B, dated 15 June 1999, shall be added at a concentration of 0.07 - 0.10 volume percent.

(3) Metal Deactivator Additive (MDA) shall not be used unless the supplier has obtained written consent from the Contracting Officer.

Signature

Prepared by:

Quality / Technical Support Office Approval:

Contracting Approval:

Legal Approval:

(Only required for E QAPs)

DMM0076

Typewritten Text DISTRIBUTION STATEMENT - A: APPROVED FOR PUBLIC RELEASE. DISTRIBUTION IS UNLIMITED