QAP-167917.docx
DOCX document 27 KB Posted
- Solicitation number
- W911PT-25Q0047
About this file
This document is a Quality Assurance Provisions (QAP) for shipping containers and wooden skids, specifically for cannon containers at the Watervliet Arsenal. The document outlines detailed quality control requirements for manufacturing 16 containers for 155-MM Howitzer M284 tubes, with strict inspection criteria covering moisture content, material defects, workmanship, dimensional requirements, strapping, and marking.
Key technical specifications include first article inspection requirements, with a 15-calendar day advance notification for government representative inspection. The containers must meet ASTM D6199 standards for wood quality, have plywood covers with the best surface facing outward, uniform strapping, and precise workmanship standards such as flush end cleats, no exposed splinters, and properly driven nails and screws. The solicitation (W911PT-25Q0047) is issued by the Department of the Army Materiel Command Contracting Command Detroit Arsenal, with delivery required FOB destination and a first article testing requirement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 11580190-4.pdf | ||
| 25Q0047.pdf | ||
| CN3.pdf | ||
| 11579763 REV AA.pdf | ||
| 11580190-3.pdf | ||
| 010301-QAP-APPX-WVA.docx | DOCX document | |
| E -5051018Y - 11580190.docx | DOCX document | |
| 11580190-1.pdf | ||
| 010731-QAP-APPX-BL.docx | DOCX document | |
| 11580190-2.pdf | ||
| CN 12.pdf | ||
| A -5051018Y - 11580190.docx | DOCX document | |
| CN 5.pdf |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QUALITY ASSURANCE PROVISIONS
FOR: SHIPPING CONTAINER AND SKIDS (WOOD)
END ITEM: ALL CANNONS
PART I - LIST OF APPLICABLE DOCUMENTS
NUMBER NOMENCLATURE
| QAP-APPENDIX-WVA | GENERAL QUALITY ASSURANCE PROVISIONS | ||
| PACKAGING DATA SHEETS | AS SPECIFIED IN PROCUREMENT DOCUMENTS | ||
| BILL OF MATERIALS | AS SPECIFIED IN APPLICABLE PDS OR DRAWINGS | ||
| SPECIFICATIONS | AS SPECIFIED IN APPLICABLE PDS OR DRAWINGS | ||
| ASTM D6199 | QUALITY OF WOOD MEMBERS FOR CONTAINERS AND PALLETS |
PART II QUALITY PROVISIONS
1. DISTRIBUTION STATEMEMT A: UNLIMITED.
2. The Contractor Requirements and Inspection Provisions contained in QAP-APPENDIX-WVA form a part of this QAP.
3. Quality Conformance Inspection shall consist of inspection of all Contract Quality Requirements in accordance with QAP-APPENDIX-WVA and this QAP.
4. FIRST ARTICLE REQUIREMENTS. Unless otherwise specified in the contract, a First Article Inspection shall be conducted in accordance with QAP-APPENDIX-WVA and STM-1.
PART III INSPECTION REQUIREMENTS
NOTE: ALL MEMBERS CUT FOR ONE TYPE AND ORDER OF CONTAINER SHALL BE CONSIDERED A LOT.
MAJOR CHARACTERISTICS SAMPLE SIZE PER LOT INSPECTION METHOD
101 MOISTURE CONTENT & MATERIAL DEFECTS 5 STM-2
102 WORKMANSHIP 5 STM-3
103 DIMENSIONAL REQUIREMENTS 5 SCALE
104 APPLICATION OF STRAPPING 5 VISUAL
105 MARKING 5 VISUAL
PART IV CERTIFICATIONS
NUMBER CHARACTERISTICS
| 301 | MATERIAL: |
| IAW APPLICABLE PDS, SPECIFICATION, BILL OF MATERIALS OR DRAWINGS | |
| AS SPECIFIED IN PROCUREMENT DOCUMENTS |
REVISION STATUS
ARDEC - QUALITY ENGINEERING DIRECTORATE -
ERR
DATE
REV
DWG DATE
REV
BENET LABORATORIES SUPPORT, WATERVLIET, NY 12189-4000
59260
950215
P
PREPARED BY CAGE CODE 1NUW7
DWG CAGE CODE 19206
L3Q1007
030211
R
SUBMITTED BY R. HUYCK
QAP/DWG 167917
APPROVED BY M. LONGMATE
SHEET 1 OF 2
AMSTA-AR-QAC-T Form 317-E, 1 Mar 00 Edition of SIOWV Form 317-E, 1 Jul 97 is obsolete.
PART V TEST METHODS AND PROCEDURES
STM-1 FIRST ARTICLE REQUIREMENTS
A government representative will inspect the initial container. A 15-calendar day prior notification is required to permit a representative to attend the inspection. Upon approval of the container inspection, the contractor will retain and will use this same container as a visual reference for constructional details. This container may be eventually used as part of the production lot.
STM-2 MOISTURE CONTENT & MATERIAL DEFECTS
Moisture content and material defects shall be determined in accordance with ASTM D6199.
STM-3 WORKMANSHIP
Workmanship shall be in accordance with good commercial practice for this type of work. Containers shall be free from exposed splinters, sharp projections, and ragged edges. End cleats shall be flush with sides. Plywood covers shall have the best surface to the outside. Strapping shall be uniformly applied, conforming to container surfaces and firmly secured in place. Nails shall not be bent or overdriven. When screws are specified they shall be hammer driven only far enough to make threads take hold, then driven the remaining distance with a manual or power screwdriver, avoiding overdriving. All screws shall be so driven that their heads shall not protrude above the surface of the board. For some cases it may be necessary to countersink.
ERR
DATE
REV
DWG DATE
REV
CAGE CODE
QAP/DWG
SHEET
L3Q1007
030211
R
19206
167917
AMSTA-AR-QAC-T Form 317-E,(CONT) 1 Mar 00 Edition of SIOWV Form 317-E, 1 Jul 97 is obsolete.
File details come from the government source that posted it. Updated .