QALI.pdf
PDF 900 KB Posted
- Attached to
- B-1B Escape Handles Federal contract opportunity
- Solicitation number
- FD20202050070
About this file
This document outlines quality assurance requirements for a sole source contract award to Universal Propulsion Company for escape handles on the B-1B Weapon System. The contract is with the Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base. Universal Propulsion will provide 36 escape handles under part number 2674300-301-02, 48 handles under part number 2674200-201-02, and 16 handles under part number 2674100-101-03. Delivery is required in fiscal year 2021. The Defense Contract Management Agency will inspect items at various points including explosive weight verification, leak testing, x-ray examination, lot acceptance testing, and preparation for shipment. Additional inspection requirements may be imposed as necessary.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| AIR SPEC 20-50070 Amended 30 Aug 2019.pdf | ||
| 20-50070 807s.pdf | ||
| 20-77091 EDL.pdf | ||
| DD 1653.pdf | ||
| 20-77090 EDL.pdf | ||
| CADPAD Item Marking Instruction - Ver 1.5 - 20190501.pdf | ||
| REPSHIP 11 Mar 14.doc | DOC document | |
| SPI Part II.pdf | ||
| Reman and Repair.doc | DOC document | |
| 20-93847 EDL.pdf | ||
| TransInstruction4.pdf | ||
| 20-50070 EDLs.pdf | ||
| ADC SOW Jan 2018.doc | DOC document | |
| 20-50070 Item Descriptions.pdf | ||
| Hazard Sheet.pdf | ||
| SPI.pdf |
Show all 16
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Contractor Name
CAGE code
PR No. FD2020-
Date Contract Awarded
Final Delivery Date (FDD)
Program Name
DODIC
Part Number
The contractor, at a minimum, shall allow DCMA to inspect the following points:
Mandatory - M: Stamp and/ or Signature on original documentation (i.e., Mfg. Planning, ATP, FAT Report, etc.)
Witness - W: GSI required to attend per comment section.
Verification - V: Stamp and/or Signature required unless noted otherwise (may be done by written verification) Monitor - R: Will monitor testing, may reduce to verification per comment section.
Notify - N: By phone or email prior to action.
Additional requirements: (DCMA reserves the right to impose additional inspection points as deemed necessary.)
Prepared by:
Date
THIS PLANNING SHEET WILL BE UPDATED IF NECESSARY.
QUALITY ASSURANCE LETTER OF INSTRUCTION
Planning Requirements
COMMENTS
NOTICE
Engineer Signature
Rev Date: 5 May 2019
Sheet1
| Text46: | |
| 2019-05-10T14:08:25-0600 | |
| SWANSON.DEVIN.D.1385800432 |
| undefined_9: N |
| Text32: 9. Additional Requirements |
| undefined_8: M |
| Text31: 8. Shippers (DD250, Reports) |
| undefined_7: M |
| Text30: 7. AMMO Data Card Review |
| undefined_6: V |
| Text29: 6. Preparation for Shipment |
| undefined_5: W |
| Text28: 5. LAT |
| undefined_4: V |
| Text27: 4. LAT Sample Selection |
| undefined_3: V |
| Text26: 3. X-Ray/N-Ray |
| undefined_2: V |
| Text25: 2. Leak Test |
| undefined: V |
| Text36: 1. Explosive Weight |
2. Verify gross leak and fine leak check are performed.
3. Ensure film labeling correct. Ensure radiographic film is readable and well-defined. DCMA is not required to interpret film.
4. Randomly select LAT units per latest government approved ATP.
5. Testing should occur in accordance with latest government approved ATP. Prior to LAT ensure proper calibration and validation of all test equipment. Witness proper test setup and at least the first 3 functional tests. Further witnessing may be required if there are known concerns with the item or requested by Government Engineer.
6. Ensure Paperwork is correct.
7. Verify all energetic materials: list original manufacturer,original lot number, and latest certification/recertification date < 24 months.
8. Ensure Paperwork is correct. Verify Packaging, Packing, Preservation & Marking (PPP&M)
9. Any additional requirements imposed by DCMA shall be approved by Government Project Engineer
| Text24: 1.Inspection |
| Part Number: 2674300-301-02, 2674300-301-03, 2674300-301-04 |
| DODIC: UY02, UY03, UY01 |
| Text20: 17610 |
| Text19: |
| Part Number Line 2: |
| Contract No: |
| Date Contract Awarded: |
| Final Delivery Date FDD: |
| Program Name: B-1B |
File details come from the government source that posted it. Updated .