QAIRQMT_REPORT 4767FD.pdf
PDF 87 KB Posted
- Attached to
- Repair Services for the MUTES Program
- Solicitation number
- FA825026Q0011
About this file
This is a Quality Assurance Provisions and Special Inspection Requirements form (AFMC Form 807) for the repair of an Azimuth Drive Motor (Part Number DPM56PF4-K7714, National Stock Number 6105013294767FD). The form specifies that standard inspection per FAR 52.246-2 will be conducted at the contractor's facility (source inspection and acceptance) as the item must meet critical technical and performance requirements. Inspection at destination is not feasible because the RTS-SPO lacks proper test equipment and reopening the item's packaging would necessitate costly repacking with no added value.
The technical authority, Jason L. Francom (415 SCMS/GUMAA, 801-586-2174), determined on 01 JUL 2024 that the item qualifies for source-point inspection and acceptance under all three applicable criteria. A previous source will be used for this acquisition, and no pre-award quality survey is required. The form includes a statement confirming that the requirement does not necessitate the use of Class I ozone-depleting substances. The item manager is Christina McGinnis (801-895-1226), and the equipment specification contact is Jason L. Francom (801-586-2884). Quality provisions cannot be downgraded without technical authority coordination, and the technical authority must be notified if award selection is made to a new source.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA825026Q0011.pdf | ||
| ITMDESC_REPORT 6234FD.pdf | ||
| ITMDESC_REPORT 4767FD.pdf | ||
| TRNSPDATA_REPORT.pdf | ||
| PKGRQMT_REPORT.pdf | ||
| PWS.pdf | ||
| QAIRQMT_REPORT 6234FD.pdf | ||
| 4767FD IUID.pdf | ||
| CDRLS.pdf | ||
| CAVAF.pdf | ||
| PACKAGING SOW.pdf | ||
| 6234FD IUID.pdf |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RECOMMENDED QUALITY ASSURANCE PROVISIONS
AND SPECIAL INSPECTION REQUIREMENTS
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
6105013294767FD
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Christina, Mcginnis / 801-895-1226
6. EQUIPMENT SPEC / PHONE
Francom, Jason L / 801-586-2884
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY FOR INSPECTION
FAR 52.246-15
X STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6 AS APPLICABLE TO CONTRACT
HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS FAR 52.246-11
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Grimes, Willie MNAME: 11 OCT 2012DATE:
P/N: DPM56PF4-K7714; Nomenclature: Azimuth Drive Motor T.O. 31R2-4-950-4 ESD: No SPI: Yes, F000003XE4
"In accordance with FAR 46.2 Contract Quality Requirements, it has been determined by the Technical Authority that the item to be repaired under this acquisition must meet critical technical/performance requirements and therefore inspection at the contractor's facility, per FAR 52.246-2 Standard Inspection, is necessary."
Block 3. This item meets all three criteria for inspection at Source.
Block 4. This item meets the criteria for acceptance at the Source.
Note: It is not feasible to inspect/accept these items at the destination. The RTS-SPO does not have the proper test equipment at this location, if the packaging of this item is disturbed, opened in any way, these item will have to be re-packed. Not cost effective, No Value Added.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE DAFFARS 5323.8)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
C
11. SIGNATURE OF TECHNICAL AUTHORITY
Francom, Jason L
ORGANIZATION / SYMBOL
415 SCMS / GUMAA
PHONE
801-586-2174 / 586-2174
DATE
01 JUL 2024
Page 1 of 1Prescribed by: AFMCI20-102 Version 4Generated by PRPS using Jasper Reports on 08 May 2026
AFMC FORM 807, 20230130 PREVIOUS EDITION IS OBSOLETE
File details come from the government source that posted it. Updated .