QA for SPE60120R0324 ABO LN 9.1F Europe.pdf

Questions and Answers for SPE601-20-R-0324 ABO and LN2 – 9.1F Europe 2 Feb 21

Question 1: Product: For the Certificate of Analysis (COA) a specification is mandatory (What exactly should be tested)?

Answer 1: MIL-SPEC 27210J or CGA 4.3 will be done for all 60-day samples at assigned Laboratory in the UK

Question 2: Tank Over-Pressure Protection: This refers to an SAA. Normally your Tank should already be equipped with it. According to our technical expert, we usually we do not retrofit this. According to PVI this is an intervention in the system, thus the system loses TÜV and must be completely accepted again. This should also be clarified.... In addition, a checklist must be completed together with the customer (connection, pressure etc..). For this we need a contact on site.

Answer 2: They are not equipped to receive product with pump assist. Gravity fill and under 50 PSI or 3.4 Bar

Question 3: Is possible to quote in Euro and not dollars.

Answer 3: All quotes are to be submitted in US dollars.

Question 4: What is the meaning of "UG6"? it seems a unit, in fact we would like to know in what unit the quantities in the table are expressed.

Answer 4: UG6 is for gallons

Question 5: Clarify who is the contact person.

Answer 5: The points of contact are in the SF 1449 page 3, #5.

Question 6: Clarify if we must present the offers to each plant individually or one global offer.

Answer 6: Please refer to SF1449, page 3, # 2.

Question 7: Clarify what the deadline is to present our offers.

Answer 7: Please refer to SF1449 page 1, Block 8.

Comment: It is not possible to access at www.betasam.gov

Response: Betasam.gov is the website for the point of entry for all Government contracts.