Q-90222-3 IDEQ Jensen.pdf

http://www.ortec-online.com

ADVANCED MEASUREMENT TECHNOLOGY

801 South Illinois Ave.

Oak Ridge, TN 37831-0895 United States of America Telephone: (865) 482-4411 Fax: (865) 483-0396

Rick Jensen State of Idaho - DEQ - Dept of Environmental Quality 900 Noth Skyline Drive

Suite B Idaho Falls, Idaho 83402 United States Phone: (208) 528-2619

Date: 12/1/2025 Quote No: Q-90222-3

Inquiry No.:

Valid Until: 12/31/2025

Freight Terms: Prepay & Add F.O.B. Factory

Title Passes: Factory Estimated Ship Date: 77 Days After Receipt of Order

*see Notes below Payment Terms: Net 30

Method of Shipment: FEDEX GROUND

If the end user is other than State of Idaho - DEQ - Dept of Environmental Quality or the end use country is other than United States, then end use declaration is required.

QUOTATION

PLEASE USE "ADVANCED MEASUREMENT TECHNOLOGY, INC." AS OUR COMPANY NAME AND REFERENCE

THE QUOTE NUMBER ON ALL PURCHASE ORDERS AND SEND THEM TO THE ABOVE ADDRESS.

Primary Quotation

Item Product List Price Disc. (%) Qty Unit Price Extended Price

1 DETECTIVE-X USD 178,995.00 19.00 1 USD 144,985.95 USD 144,985.95

3 MeV Enhanced Capability, Ultra-Light-Weight, Portable High Efficiency HPGe Identifier (Gamma only).

Includes GPS, mains adapter, vehicle power cable, USB flash drive, shoulder strap, Bluetooth headset, wheeled hard-sided case and MAESTRO-PRO software.

Price includes a surcharge due to a global spike in raw germanium metal prices.

https://www.ortec-online.com/products/portable-radioisotope-identification-devices-riids/ detective-x

3 DETECTIVE-X-ACC-BAT USD 613.00 19.00 2 USD 496.53 USD 993.06

Lithium-Ion Battery.

https://www.ortec-online.com/products/portable-radioisotope-identification-devices-riids/ detective-x

TOTAL: USD

145,979.01

Available Warranties

Item Warranty Description Covered Products

2 EW-S-1-ORT(MICRO) Silver Level Extended Warranty - 1 Additional Year

DETECTIVE-X

801 South Illinois Ave.

Oak Ridge, TN 37831-0895 United States of America Telephone: (865) 482-4411 Fax: (865) 483-0396

TOTAL: USD 9,307.74

Authorized by: Sales Representative:

Tammy Just Direct Telephone: (865) 617-5397 Toll Free Telephone: (800) 251-9750, x- Fax: (865) 483-0396 E-mail: tammy.just@ametek.com

Notes:

This quote was prepared electronically and is valid without a signature.

Credit Card Surcharge: A 3 percent surcharge will be applied to the total value of any payment made by credit card.

Sales Tax: The customer’s local tax rate is applied to sales of equipment if applicable. Please contact our offices to confirm any tax exemption status.

Estimated ship date is based on the availability of manufacturing parts after receipt of order and is the date for the goods to ship from the factory.

Extended Warranty Options: The Silver Level extended return-to-factory warranty is a 1-year extension of our free one-year initial warranty. This warranty includes labor, material, and return shipping. Contact factory for a quote on our Platinum and Gold plans. This price is valid only when purchased with the quoted equipment.

Federal Identification number: 62-1369733

DUNS: 003380656

Wire Transfers:

AMETEK, INC. JPMorgan Chase Bank Account # 0304906484 ABA#021000021

SWIFT ID CHAS US

New York, NY, 10001, US

When submitting wire transfers for any purchase order placed with Advanced Measurement Technology, Inc., please insure the wire transfer includes an identifying reference number such as the sales order number, purchase order number or invoice number if available. Wire transfers received without this information may not be quickly identified or applied to the proper customer account.

Banking Information for Letters of Credit:

Wells Fargo Bank Attn: LC Department One South Broad Street – PA4928 Philadelphia, PA 19107

SWIFT: PNBPUS33CHA

When processing letters of credit for any purchase order placed with Advanced Measurement Technology, Inc., please ensure the beneficiary is listed as Advanced Measurement Technology, Inc. located at 801 South Illinois Avenue, Oak Ridge, TN 37830 USA.

Return/Restocking Charges: A restocking fee of 15% of the list price will be charged for unused items returned to Advanced Measurement Technology, Inc. within 90 days of the shipment date. Specially modified products or products designed to customer specifications cannot be accepted for restocking. Neither will unused items returned after 90 days nor used items be accepted for restocking. Products distributed by Advanced Measurement Technology, Inc., but not manufactured by Advanced Measurement Technology, Inc., cannot be returned for credit unless the original manufacturer agrees to a return for credit. The restocking fee

801 South Illinois Ave.

Oak Ridge, TN 37831-0895 United States of America Telephone: (865) 482-4411 Fax: (865) 483-0396 does not apply if Advanced Measurement Technology, Inc. determines that the return is necessary because of an error on the part of Advanced Measurement Technology, Inc.

New sales are subject to credit approval. Prices are for domestic use. Contact our export department for items leaving the United States.

This quote, and any subsequent order, is subject to the applicable Advanced Measurement Technology terms and conditions.

ORTEC, Princeton Applied Research, Signal Recovery, and Solartron Analytical products are manufactured and distributed by Advanced Measurement Technology, Inc. Oak Ridge, TN, USA. Advanced Measurement Technology is a subsidiary of AMETEK, Inc.

Any purchase order or contract for sale generated from Advanced Measurement Technology’s quotation for the export of goods, technology or services is subject to the Export Control Laws and Regulations of the United States. As a result, the export of such goods, and consequent re-export of such goods, may require an export license prior to shipment.

Prohibition against export or re-export to the Russian Federation

1. The Buyer shall not sell, export or re-export, directly or indirectly, to the Russian Federation or for use in the Russian Federation any goods supplied

2. The Buyer shall undertake its best efforts to ensure that the purpose of paragraph (1) is not frustrated by any third parties further down the commercial chain, including by possible resellers.

3. The Buyer shall set up and maintain an adequate monitoring mechanism to detect conduct by any third parties further down the commercial chain, including by possible resellers, that would frustrate the purpose of paragraph (1).

4. Any violation of paragraphs (1), (2) or (3) shall entitle Seller to seek appropriate remedies, including, but not limited to: termination of the business relationship; and recovery of any losses resulting from such a breach, or the price of the goods exported, whichever is higher.

5. The Buyer shall immediately inform the Seller about any problems in applying paragraphs (1), (2) or (3), including any relevant activities by third parties that could frustrate the purpose of paragraph (1). The Buyer shall make available to the Seller information concerning compliance with the obligations under paragraph (1), (2) and (3) within two weeks of the simple request of such information.

September 2024

AMETEK, Inc. TERMS AND CONDITIONS OF SALE THE FOLLOWING TERMS/CONDITIONS, TOGETHER WITH ANY OTHER TERMS/CONDITIONS SPECIFICALLY AGREED TO IN WRITING BY SELLER, SHALL APPLY TO ALL ORDERS (“Order(s)”) FROM, AND SALES OF PRODUCTS (“Products”) OR SERVICES (“Services”) TO BUYER. ANY ACCEPTANCE OF ANY ORDER OF BUYER IS CONDITIONED UPON THESE TERMS/CONDITIONS. ANY ADDITIONAL OR DIFFERENT TERMS/CONDITIONS PROPOSED BY BUYER IN ANY DOCUMENT ARE OBJECTED TO AND SHALL NOT BE BINDING UPON SELLER. No salesperson is authorized to bind Seller to any promise or understanding not expressed herein.

I. PRICES All prices are subject to change without notice in the event of any changes in cost of materials or labor, specifications, quantities, delivery schedules, customs duties, other factors beyond Seller’s control, or in the event of delays caused by instructions of the Buyer, or failure of the Buyer to give Seller adequate information. Further, prices payable by the Buyer shall be subject to immediate increase, should the Seller as a result of governmental action or regulation including, without limitation, those contemplated by an investigation under Section 232 of the Trade Expansion Act of 1962 (19 U.S.C. §1862) or those contemplated by an investigation under Section 301 of the Trade Act of 1974 (19 U.S.C. §2411), incur additional duties, tariffs or restrictions on products sold hereunder, or on the raw materials that are used in making such products. In no event shall prices include any amounts imposed on the Buyer in connection with Buyer’s purchases from Seller, such as taxes, including but not limited to Value Added Tax (VAT) or excise taxes, duties, tariffs, or any other costs assessed against the Buyer by a governmental authority.

Without limiting the foregoing, all prices are subject to adjustment without notice at any time prior to shipment in the event that the prices or costs related to any component, materials, parts, or commodities utilized in the Products or Services have increased following the acceptance of any Order for any Products or Services (a “Component Adjustment”). Any Component Adjustment, as determined by Seller, shall be reflected in the invoice for Products or Services that is transmitted from Seller to Buyer in accordance with the terms and conditions hereof. Without limiting the foregoing, all prices are subject to adjustment without notice at any time prior to shipment due to increases in inflation occurring following the acceptance of any Order for any Products or Services (an “Inflation Adjustment”). The Inflation Adjustment for any Products or Services shall be made by multiplying (a) the ratio obtained by dividing the (i) Consumer Price Index (CPI) in place at the time of invoice by (ii) the Consumer Price Index (CPI) in effect at the time of acceptance of an Order times (b) the price or cost for any applicable Products/Services as set forth in the Order. Any Inflation Adjustment, as determined by Seller, shall be reflected in the invoice for Products or Services transmitted from Seller to Buyer in accordance with the terms and conditions hereof.

II.DELIVERY Delivery dates are approximate and are dependent on prompt receipt by Seller of all necessary information. Seller may deliver all or any part of Products/ Services as early as 30 days in advance of agreed schedule. The point of delivery shall be FCA Seller’s premises, unless otherwise specified by Seller. Upon delivery, title to Products and all risk of loss or damage thereto shall pass to Buyer. Where Buyer notifies Seller that it cannot take timely delivery of the Products, Seller may place such Products in storage, at the risk of Buyer, and Buyer shall reimburse Seller for all expenses incurred in connection with such storage. Buyer shall dispose of the packing materials for Products at its own expense, and shall defend, indemnify and hold harmless Seller from any legal obligations in connection with such packing waste.

III. PAYMENT A. The term of payment shall be net 30 days from date of Seller's invoice, unless otherwise specified. Payments shall be made by Buyer without any deduction or set-off. Unless otherwise agreed, payment shall be made in U.S. dollars. Seller may charge late payment fees at the rate of 1.5% per month, or the highest rate permitted by law, whichever is less, accruing daily.

B. If the financial condition of Buyer is unsatisfactory to Seller, Seller may require full or partial payment in advance, or satisfactory security, in the form of a letter of credit or otherwise. In the event of bankruptcy or insolvency of Buyer, Seller may immediately cancel any Order then outstanding.

C. Buyer grants Seller a purchase money security interest in Products located in the United States, or Services, as well as any proceeds, for the purpose of securing the obligations of Buyer hereunder. Buyer authorizes Seller to execute on Buyer’s behalf and file such financing statements as Seller deems appropriate to perfect and notify Buyer’s creditors of Seller’s security interest.

IV.VARIATIONS IN QUANTITY; CHANGES. Buyer shall accept delivery of quantities greater or smaller than the quantity specified in Order(s), provided that any such variation shall not exceed 5% of the quantity originally specified, or 2 units, whichever is greater. Seller shall not be required to give notice of any such variations other than in the applicable shipping notice and invoice. Seller reserves the option to make changes to Products or Services which do not affect form, fit, or function, and shall deliver Products to the latest configuration part number at the time of delivery. No Order may be terminated in whole or part without Seller’s prior express written consent, which consent shall be in Seller’s sole discretion.

V.EXPORT CONTROLS; SANCTIONS; FCPA; UKBA; ANTI-BOYCOTT AND UKCFA

A. Buyer shall not make any disposition of the Products, by way of transshipment, re-export, diversion or otherwise, except as applicable U.S. export and sanctions laws and regulations may expressly permit, and other than in and to the ultimate country of destination specified on Order(s) or declared as the country of ultimate destination on Seller's invoices or in the End Use Statement that Buyer supplies Seller. Seller shall submit export clearance filings based on end use and end user information that Buyer provided to Seller . Failure of Buyer to comply with the requirements specified in this section shall constitute a material default allowing Seller to cancel related Order(s) without liability.

B. Buyer warrants that it shall not violate or cause the Seller to violate the U.S. Foreign Corrupt Practices Act of 1977 (FCPA), as amended, the United Kingdom Bribery Act (UKBA) of 2010, as amended, or their respective implementing regulations in connection with Buyer’s sale or distribution of the Products and/or Services. Buyer also warrants that Buyer does not know or have reason to believe that any consultant, agent, representative or other person retained by Buyer in connection with the sale and/or distribution of Products/Services has violated, nor caused Seller to violate the FPCA and/or the UKBA. Where Buyer learns of or has reason to know of any violation of FCPA and/or or UKBA in connection with the sale or distribution of Products/Services, Buyer shall immediately advise Seller.

C. Buyer further warrants that Buyer shall not violate or cause Seller to violate the U.S. Antiboycott Provisions of the U.S. Export Administration Regulations issued pursuant to the U.S. Export Administration Act of 1979, as amended, in connection with Buyer’s purchase of Products/Services and that Buyer shall not request or require Seller to make statements or certifications against countries that are not subject to boycott by the U.S.

D. Buyer shall not facilitate tax evasion or fail to prevent tax facilitation in the UK or other countries in accordance with the requirements of the UK Criminal Facilitation Act (UKFCA).

VI.WARRANTIES A. Seller warrants that Products manufactured by Seller, when delivered, shall be free from defects in material/workmanship. Seller warrants that Services shall be performed in accordance with generally accepted industry practice. Seller's obligations under this warranty shall be limited exclusively to repairing or replacing, at Seller's option, any part of Products which, if properly installed, used and maintained, proved to have been defective in material or workmanship within 1 year from the date of shipment, or re-performing the Services. Seller warrants for a period of 1 year from the date of shipment that software or firmware, when used with Products, shall perform in accordance with Seller’s published specifications. Seller makes no warranty, express or implied, that the operations of the software or firmware shall be uninterrupted or error-free, or that functions contained therein shall meet or satisfy the Buyer’s intended use/requirements. Buyer shall notify Seller of any defect in the quality or condition of Products (including software/firmware) or Services within 7 days of the date of delivery or performance, unless the defect was not apparent on reasonable inspection, in which case, within 7 days after discovery of the defect. If Buyer does not provide such timely notification, it shall not be entitled to reject Products (including software/firmware) or Services, and Seller shall have no liability for such defect.

B. Seller's warranty obligations shall not apply to Products which (1) have been altered or repaired by someone other than Seller, or (2) have been subjected to misuse, neglect, or improper use or application, or (3) are normally consumed in operation, or (4) have a normal life inherently shorter than the warranty period stated therein.

C. No Products may be returned unless authorized in advance by Seller, and then only upon such conditions to which Seller may agree. Buyer must obtain a Return Material Authorization (RMA) number from Seller prior to any return shipment, and such RMA number must appear on the shipping label and packing slip. Buyer shall be responsible for returned Products until such time as Seller receives the same at its facility, and for all charges for packing, inspection, shipping, transportation or insurance associated with returned Products.

D. This section VI sets forth the exclusive remedies and obligations for claims based upon defects in or nonconformity of Products/Services, whether the claim is in contract, warranty, tort (including negligence of any degree or strict liability) or otherwise. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL

OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESS, IMPLIED OR STATUTORY. NO

IMPLIED OR STATUTORY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR

PURPOSE SHALL APPLY.

VII.PATENTS/INDEMNITY If Buyer receives a claim that Products, or part thereof manufactured by Seller infringes a patent, Buyer shall notify Seller promptly in writing and give Seller information, assistance and exclusive authority to evaluate, defend and settle such claim. Where Buyer has furnished specifications/designs for the manufacture of the allegedly- infringing Products, Buyer shall defend, indemnify and hold harmless Seller against third-party claims for infringement arising out of Seller’s use of such specifications/designs.

VIII.LIMITATION OF LIABILITY

The total liability of Seller on any claim, whether in contract, tort (including negligence of any degree and strict liability) or otherwise arising out of, connected with, or resulting from the manufacture, sale, delivery, resale, repair, replacement or use of any Products/Services, shall not exceed the price allocable to the Products/Services or part thereof which gives rise to the claim. IN NO EVENT, WHETHER AS A RESULT

OF BREACH OF CONTRACT, WARRANTY, TORT, (INCLUDING NEGLIGENCE OF ANY DEGREE,

STRICT LIABILITY OR PATENT INFRINGEMENT) OR OTHERWISE, SHALL SELLER, ITS

AFFILIATES, SUBCONTRACTORS, OR SUPPLIERS BE LIABLE FOR ANY LOSS OF PROFIT OR

REVENUES, LOSS OF USE OF THE PRODUCTS OR SERVICES, OR ANY ASSOCIATED

EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE GOODS, FACILITIES, SERVICES OR

REPLACEMENT POWER, DOWNTIME COSTS OR CLAIMS OF BUYER'S CUSTOMERS FOR

DAMAGES OR FOR ANY SPECIAL, PROXIMATE, CONSEQUENTIAL, INCIDENTAL, INDIRECT OR

EXEMPLARY DAMAGES. If Buyer transfers title to, or leases Products sold hereunder to, or otherwise permits or suffers use by, any third party, Buyer shall obtain from such third party a provision affording Seller and its subcontractors/suppliers the protection of the preceding sentence. Any action against Seller must be brought within 18 months after cause of action accrues.

IX.EXCUSABLE DELAYS A. Seller shall not be liable for delays in delivery or failure to perform due directly or indirectly to causes beyond Seller's reasonable control including but not limited to: acts of God;

war; terrorism; civil commotion; riots; embargoes; government regulations, export license denials, port congestion; acts of or failure to act on the part of Buyer or its agents/employees; fires; floods; sabotage;

nuclear incidents; earthquakes; storms; epidemics; pandemics; government action or orders; strikes;

lockouts or other labor difficulties; shortages of or inability to timely obtain proper labor, materials, components, shipping space or transportation, fuel, supplies or power at current prices; or due to limitations imposed by the extent of availability of Seller’s normal manufacturing facilities.

B. If a delay excused per the above extends for more than 90 days and the parties have not agreed upon a revised basis for continuing providing Products/Services at the end of the delay, including adjustment of the price, then either party (except where delay is caused by Buyer, in which event only Seller) upon thirty

(30) days’ notice may terminate the Order with respect to the unexecuted portion of the Products/Services, whereupon Buyer shall promptly pay Seller its reasonable termination charges upon submission of Seller's invoices thereof.

X.SOFTWARE/TECHNICAL/PROPRIETARY INFORMATION A. Buyer shall not acquire any rights to any software which may be delivered with Products, except as granted in Seller’s standard software license. Any software license granted in connection with Products shall be an interim license, which may be withdrawn, pending payment for Products in full.

B. The purchase of Products shall not include any right to supply of technical information such as drawings or specifications.

C. Proprietary information, including drawings, documents, technical data, reports, software, designs, inventions and other technical information supplied by Seller in connection herewith (hereinafter called "Data"), shall remain Seller's sole property and shall be held in confidence by Buyer. Data shall not be reproduced, used or disclosed to others by Buyer without Seller’s prior written consent. Upon completion of Order, Buyer shall promptly return all Data to Seller together with all copies or reprints thereof then in Buyer's possession or control, and Buyer shall thereafter make no future use, either directly or indirectly, of any Data or any information derived therefrom without Seller's prior written consent. The foregoing shall in no way obligate Seller to provide or supply Data.

XI.DIES, TOOLS, PATTERNS Seller’s charges for dies, molds, patterns and the like represent the Buyer’s proportionate cost thereof, it being expressly understood that they remain the property of Seller.

Modifications made to dies, molds, patterns and the like in order to manufacture Products shall be at the discretion of Seller.

XII.GENERAL A. The rights and obligations of the Buyer and Seller hereunder shall be governed in all respects by the law of the Commonwealth of Pennsylvania, U.S.A. The exclusive forum for adjudication of any disputes shall be the federal or state courts of the Commonwealth of Pennsylvania, and Buyer/Seller hereby consent to personal jurisdiction and venue in such courts in any proceeding. The United Nations Convention on the International Sale of Goods shall not apply.

B. These Terms and Conditions of Sale together with any other terms specifically agreed to in writing by Seller constitute the entire agreement between Buyer and Seller and supersede any prior or contemporaneous representations, agreements, proposals, warranties, or understandings, oral or written, express or implied. No waiver, modification, amendment, rescission or other change to these Terms and Conditions of Sale shall be binding unless specifically agreed to in writing by an authorized representative of Seller.

C. The invalidity, of any part hereof shall not affect the validity of the remainder. The failure of Seller to assert any right at any time hereunder shall not prevent Seller's subsequent assertion of the same or different rights.

D. Buyer may not assign this contract without the prior written approval of the Seller.

XIII.PROHIBITION FOR HAZARDOUS USE

Buyer understands and agrees that Products sold hereunder are not intended for application in, and shall not be used by Buyer in the construction or operation of a nuclear installation, a nuclear facility or a nuclear reactor or in connection with use or handling of nuclear material or for any hazardous activity or critical application, where failure of a single component could cause substantial harm to persons or property, unless Products have been specifically approved by Seller for such activity or application. Seller disclaims all liability for loss or damage resulting from such unauthorized use and Buyer shall defend, hold harmless and indemnify Seller against any such liability, whether arising under breach of contract, warranty, tort (regardless of the degree of fault or negligence), strict liability or otherwise.

Where Seller approves the application of the Products in a nuclear facility, the Buyer shall, before the use or provision of such Products, execute a Nuclear Defense and Indemnification Agreement in a form acceptable to Seller.

XIV.STATUTORY REQUIREMENTS

Seller reserves the right to make any changes in the general specifications of the Products which are required for the Products to conform to any statutory requirement.

XV.GOVERNMENT CONTRACTS

Only Federal Acquisition Regulation (“FAR”) supplement clauses expressly accepted in writing by Seller shall be included or incorporated by reference herein. Seller shall not be bound by and makes no representation of compliance with any FAR or FAR supplement clauses that Seller shall not have expressly accepted in writing.

XVI.INVOICE FRAUD PREVENTION

Given the increased risk of invoice fraud, Buyer should treat any notification to change details of Seller’s bank account with suspicion. Seller will not inform or instruct Buyer to make remittance or money transfers to any other beneficiary, address or bank account via email. Always verify a request to update records or change bank account information BEFORE implementing a change or completing the payment. Verify any requested changes by speaking to a known Seller representative.