PWS Oculus Pentacam - 30Jun2026.docx

Department of Defense Defense Health Agency Performance Work Statement

Oculus Pentacam Service Contract Date: 26Jun2026

PART 1

1.0 GENERAL INFORMATION

1.1. Description of Service/Introduction: The contractor shall provide preventative maintenance and repairs for Oculus Pentacam units located at Naval Medical Center, Portsmouth, VA (NMCP), Branch Health Clinic (BHC) Sewells Point in Norfolk, Va, BHC in Oceana Virginia Beach, VA, and BHC Boone in Virginia Beach, VA.

1.2. Background: The Ophthalmology and Refractive Surgery departments of Naval Medical Readiness Training Command Portsmouth in Portsmouth, VA, Branch Health Clinic (BHC) Sewells Point in Norfolk, Va, BHC in Oceana Virginia Beach, VA, and BHC Boone in Virginia Beach, VA has a requirement for a service and maintenance plan for the Abbot Oculus Pentacam units and their components. Units were purchased between 2016 and 2025. Units are sent into Oculus for service and Oculus provides a loner unit while they are providing the service.

1.3. Period of Performance (PoP):

Base: 01October 2026 – 30September2027 Option Year 1: 01October 2027 – 30September2028 Option Year 2: 01October 2028 – 30September2029

1.4. Objectives: Limiting downtime of Oculus Pentacam units is vital to the hospital’s mission in treating patients with Ophthalmology and Refractive Surgery department’s treatment. This contract shall provide out-of-warranty break-fix repair service, and an annual Preventative Maintenance service. All service will use Original Equipment Manufacturers (OEM) parts.

1.5. Scope: An annual service contract is required for all Pentcam equipment within NMCP and outlying clinics. The vendor shall provide technical services support by phone including remote support if available, preventative maintenance every 12 months, full coverage on parts/travel/labor charges, full coverage on replacement parts, hardware or software upgrade and all software maintenance/updates.

1.6. Federal Regulations: Not Applicable

1.7. Geographical Location: 620 John Paul Johns Circle Portsmouth, VA 23452

1.8. Quality Control (QC): The contractor shall develop and maintain an effective QC program to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure nonrecurrence of defective services.

1.8.1. Quality assurance (QA): The government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan provides a systematic method for the Government to evaluate performance and to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.9. Contractor Identification: N/A Units will be sent to contractor for service.

1.10 The contractor shall report Biomed department, 54 Lewis Minor St, Building 250, 140 to the BMET who called in the service that will escort the contractor to required location for pick-up or service maintenance before any services are performed under this contract.

1.10.1. After services are completed, the contractor shall report to Biomed department, 54 Lewis Minor St, Building 250, 140 to the BMET who called in the service that will verify the work has been completed before departure.

PART 2

2.0 SPECIFIC TASK

2.1. Service Agreement for Annual Preventative Maintenance and Corrective Maintenance This contract shall provide annual preventative maintenance services which include on-site corrective repairs and calibration in accordance with the Original Manufacturer’s Equipment requirements, normal working hour coverage; emergency service and routine preventive maintenance services to Department of Defense owned equipment. It shall include all systems, subsystem components, and assemblies, (i.e.: contractor responsible for total maintenance of entire system). All maintenance provisions shall apply to hardware, firmware, and software, as appropriate, unless otherwise stated.

2.1.1. Preventive maintenance. The contractor shall make the best effort to schedule and complete annual preventive maintenance services prior to the 15th of June, but no later than the last day of the month. Shall be performed once a year in accordance with the Original Equipment Manufacturers (OEM) recommendations. The contractor shall be a qualified / authorized by the OEM (IE: Certified Agent of the OEM) in the repair of all equipment listed within this contract. Certification of the OEM must always be current (within 2 years) prior to contract award and throughout contract period. Contractor and its employees shall maintain qualifications throughout entire contract period. If a sub-contractor is used for this requirement, the sub-contractor must be a Certified Agent of the OEM. Qualification includes but not limited to the certification of all repair persons and repair facilities by the OEM (original equipment manufacturer) as being trained and qualified to perform required repairs. The Government shall maintain the right to seek proof of qualification prior to award and anytime during contract period of performance. Additionally, contractor must have ready access to parts inventory of OEM replacement parts. The contractor shall be an Original Equipment Manufacturer (OEM) authorized dealer, authorized distributor, or authorized reseller for the proposed equipment/system such that OEM warranty and service are provided and maintained by the OEM. The vendor shall be required to provide documentation from the manufacturer stating the vendor is an authorized service provider on the required equipment/system. All software licensing, warranty, and service associated with the equipment/system shall be in accordance with the OEM terms and conditions.

2.1.2. This contract shall provide annual depo level preventative maintenance services which includes, shipping of a loner unit to 54 Lewis Minor St. Portsmouth, VA 23708 and Biomed will send the unit that needs service back to Oculus for Depo level service at their facilities. The contractor shall cover all shipping costs and provide shipping labels.

2.1.3 The contractor shall provide BME a Field Service Report (FSR) within two (2) days after completion of all service performed. The service report shall include, but not be limited to: contract number, equipment description (model, serial number, equipment control number) contractor’s log number, detailed description of the service(s) performed, replacement part(s) information (part number, part value, nomenclature, unit price, manufacturer, if not OEM, and whether the part is new/used/reconditioned), the completion date and time, man-hours expended, model and serial numbers, and the name of the FSE performing the service. In the event that agents/sub-contractors are used in the performance of repairs, said agent shall be identified on the service report by company name and contact information (i.e., telephone number). Additionally, contractor will be required to affix a tag on equipment upon the completion of a preventative maintenance inspection. Tag may either be a “sticker” or “hanging tag”. As a minimum the tag shall contain: the name of the contractor, technician performing inspection and date of inspection legibly printed. FSR will be emailed to BME distribution email at usn.hampton-roads.nmrtc-portsmouth-va.list.nmcp-dfabiomed@health.mil.

2.1.4 All test equipment used in the performance of this contract must be calibrated (if required / as required by manufacture of test equipment) and shall be in compliance with Joint Commission (JC) Original Equipment Manufacturer (OEM) and Federal Drug Administration (FDA) standards as required.

2.1.5 The contractor shall provide trained, experienced, English-speaking personnel, labor, tools, diagnostic equipment, software, test phantoms, material, supplies, transportation, parts and equipment necessary to perform Preventive Maintenance (PM), Calibration (CAL), Safety testing (ST) and corrective maintenance. If one is available in the geographic area.

2.1.6 The contractor shall provide telephonic communications with the Government to discuss technical matters relating to the performance of this contract. Service calls shall be placed 24 hours a day, 7 days a week by calling a vendor supplied toll free response center. Qualified service reps are required to make a “best effort” to call back within 4-hours during normal business hours (8:00am – 4:30pm EST Monday – Friday excluding Federal Holidays) to schedule service visit.

2.1.7 Recognized Federal holidays: All Federal Holidays and Presidential Executive Orders.

Independence Day

2.2 Corrective Maintenance. This contract shall provide depo level corrective maintenance services which includes, shipping of a loner unit to 54 Lewis Minor St. Portsmouth, VA 23708 and Biomed will send the unit that needs service back to Oculus for Depo level service at their facilities. The contractor shall cover all shipping costs and provide shipping labels.

2.2.1 In the event that emergency services outside the normal working hours are required by the Government, NMCP will have to complete a new purchase order via a government purchase card order or a new purchase order to authorize. Government request for corrective maintenance will be placed by BME, to the contractor’s POC. Corrective Maintenance shall be completed during the hours specified in the contract. If the Vendor cannot provide an FSE, they shall send a loner unit to 54 Lewis Minor St. Portsmouth, VA 23708 and Biomed will send the unit that needs service back to Oculus for Depo level service.

2.3 Replacement Parts: The contractor shall have ready access to unique and/or high mortality replacement parts. All parts supplied shall be compatible with the existing system. In the event that replacements parts are required to be shipped. Shipping shall be performed in the fastest reasonable means possible (i.e., next day air) at no additional cost to the Government. All replacement parts shall be new and certified as OEM replacement parts. The contractor shall at their expense, replace all worn or defective parts necessary to restore the equipment to 100% operational condition as specified by the OEM. Vendor is not responsible for consumable items.

2.3.1 The contractor shall at their expense replace all worn or defective parts necessary to restore the equipment to 100% operational condition as specified by the OEM. Vendor is not responsible for consumable items.

2.3.2 Contractor installed replacement parts shall become the property of the Government, and the replaced malfunctioning part shall become the property of the contractor. Replaced items shall be properly disposed of at no additional cost to the Government (contractor to pay all “environmental fees” where required).

2.3.3 Contractor’s pricing shall be inclusive of all costs including parts, labor, travel and shipping, unless otherwise indicated.

2.3.4 Freight, postage, and storage charges associated with shipment and receipt of replacement parts, and the return of parts shall be the responsibility of the contractor.

2.4 Software: The contractor must include software revisions and updates (field service changes), which are required due to FDA, or manufacturer announced safety-hazard recall, to include FDA Year 2000 Compliance Directive, as part of the contract at no additional cost to the Government. Updates shall be performed as soon as possible after release, but no later than the first scheduled Preventative Maintenance Inspection after release. For any updates that have been identified as critical or required for the proper operation of equipment by the OEM, contractor shall provide installation within 30 days of release regardless of preventative maintenance schedules.

2.5 Removal of Government Property: Whenever the repair of equipment cannot be performed at the Government site as determined by the contractor, the contractor shall notify BME who will make arrangements for the contractor to remove the item to the contractor’s designated site. The contractor will be required to sign a Government form accepting responsibility for the Government equipment. The contractor shall provide a detailed description of removed items. For associated items / accessories, contractor to provide a detailed description and quantities of items to be removed. Description to include as a minimum manufacturers serial numbers and equipment control number (ECN) of all equipment / items removed. In the event that items / sub-assemblies / accessories are repaired via “Repair by Replacement” a detailed description of replaced items is to be included upon return of repaired components. The contractor shall provide a loaner unit during any services while the Government owned equipment is sent in for depo level services.

2.5.1 All charges resulting from a contractor determined requirement to transport Government owned property, covered by this contract, to and from an alternate repair location shall be the responsibility of the contractor.

2.6 Equipment Modification Upgrades: The contractor shall only incorporate OEM specified modifications, alterations and upgrades. Approval shall be obtained from BME prior to the contractor installation of any modification, alteration, or upgrades.

2.6.1 The contractor shall maintain contact with the OEM to determine the requirement for field modifications and to ensure accomplishment of these modifications in accordance with the time schedule set forth by the OEM.

2.6.2 The Government shall not alter the system without prior notification to the contractor.

2.6.3 The contractor at no additional cost shall provide software updates to the Government. Installation of updates will be left to the discretion of the Government. All supplied software is to be warranted current and free of defects such as viruses.

2.7 Service beyond the Scope of the Contract: The contractor shall immediately, but not later than 24 consecutive hours after discovery, notify BME, in writing, of the existence or the development of any defects in, or repair required to the scheduled equipment, which the contractor considers they are not responsible for under the terms of this contract.

2.7.1 At the same time of the notification, the contractor shall furnish BME with written estimate of the cost to make the necessary repairs. Repairs considered by the contracting Officer to be outside the scope of this contract shall not be covered under this contract but shall be ordered under a separate purchase order.

2.8 Base Access. Vendors and contractors will apply for, and maintain, base access. This can be done at https://dbids-global.dmdc.mil/home/. Vendors and contractors will also complete form SECNAV 5512/1 and submit to BME points of contacts for processing.

2.8.1 The contractor representative(s) at each site is encouraged to request a pre-maintenance inspection prior to the onset of the contract. As all apparent discrepancies must be identified upon submittal of quote, any and all claims must be received within 30 days of contract award or prior to contract start whichever occurs first. All non-apparent / hidden discrepancies must be identified no later than the first scheduled preventative maintenance. Any claims resulting from hidden defects must be received within 30 days of first scheduled preventative maintenance. Any equipment found to be inoperable during this pre-maintenance inspection would be repaired using a separate purchase order. The cost of repairs shall not exceed contractor’s normal retail rate for required repairs. The government certifies that the equipment to be maintained under this contract will be in good operating condition on the effective date of this contract. For the purpose of this contract, the clause, “good operating condition” means the conditions necessary for the equipment to function as intended without corrective maintenance. The contractor agrees to leave the equipment in good operating condition at the expiration of this contract. During the final week of this contract, the Government will make final inspection of the equipment. Any correction of deficiencies noted during this inspection shall be resolved prior to contract end. The Government reserves the right to request the repair (at no additional cost to the Government) of items identified with latten defects after contract termination, when it has been determined that defects are either a result of contractor’s performance or should have been discovered during normal performance of work under this contract.

2.8.2 The Government will not be responsible for the damage or loss due to fire, theft, accident, or other disaster of contractor supplies, materials, or for the personal belongings brought onto Government property by contractor’s personnel.

2.9 Special Qualifications: The Contractor must be an OEM-certified service provider. Contractors must verify that an individual whom they plan to employ or continue to employ in the performance of this contract is authorized to accept employment in the United States. Individuals such as those who have been admitted as permanent residents, granted asylum or refugee status, or admitted in work-related nonimmigrant classifications may have employment authorization as a direct result of their immigration status.

PART 3

3.0 GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

The Requiring Activity Authority has assessed the need for Government Furnished Property, Utilities, and Materials and determined:

3.1. Services: The Government:

☒ Will NOT provide Government Furnished Services in support of this contract/task order. As a result, this paragraph is Not Applicable.

☐ WILL provide Government Furnished Services required in support of this contract/task orders. These Services are described below: provide

3.2. Utilities: The Government:

☐ Will NOT provide Utilities in support of this contract/task order. As a result, this paragraph is Not Applicable.

☒ WILL provide Utilities in support of this contract/task orders. The Government provided Utilities are described below:

· Electricity

· O2

· Medical Air

· Suction

· Water

3.3. Materials: The Government:

☒ Will NOT provide Materials in support of this contract/task order. As a result, this paragraph is Not Applicable.

☐ IS providing Materials in support of this contract/task orders. The Government-provided Materials are described below:

PART 4

4.0 CONTRACTOR FURNISHED ITEMS AND SERVICES

4.1. Services: The Contractor:

☐ Will NOT provide Contractor Furnished Services in support of this contract/task order. As a result, this paragraph is Not Applicable.

☒ WILL provide Contractor Furnished Services required in support of this contract/task orders. These Services are described below: The contractor shall provide all services as described in Part 2 of this PWS.

4.2. General: The contractor shall furnish all supplies, equipment, facilities and services required to perform work listed under Section 2 of this PWS.

4.3. Secret Facility Clearance: Not Applicable

4.4. Materials: The contractor shall furnish all materials, supplies, and replacement parts necessary to meet the requirements under this PWS.

4.5. Equipment: The contractor shall furnish all tools, diagnostic equipment, test phantoms, and any other equipment necessary to meet the requirements under this PWS.

4.6. Facilities: Not Applicable

PART 5, ATTACHMENT 1

PERFORMANCE REQUIREMENTS SUMMARY

The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

Performance Objective (The Service required—usually a shall statement from Part 2)

Performance Requirements Summary (PRS) # 1.

Annual Preventive Maintenance: The contractor shall perform scheduled preventive maintenance annually.

PRS # 2

Corrective Maintenance Response: The contractor shall respond to the service calls for corrective maintenance.

PRS # 3

Contractor shall provide Field Service Report (FSR) within two (2) days after completion of all service performed.

PRS # 4

Personnel Qualifications: Contractor personnel shall be qualified to perform maintenance.

6 Points of Contact

6.1 Points of Contact:

Dennis Christin: dennis.e.christin.civ@health.mil 757-953-5336 Biomed Benjamin Lee: benjamin.c.lee8.civ@health.mil 757-953-5336 Biomed Manager Daniel Arboleda: daniel.a.arboleda.mil@health.mil (757)-953-2323 COR

DHA PWS, FEB 2024

image1.png image2.emf