PWS ENCLOSURE ONE DIGGER DERRICK TRUCK TECHNICAL SPECIFICATIONS.pdf
PDF 11 KB Posted
- Attached to
- Rental of Utility Trucks
- Solicitation number
- W912HQ23S0018
About this file
This combined synopsis and solicitation requests quotes for the rental of utility trucks to support a power line distribution course at Fort Leonard Wood, Missouri. Specifically, the U.S. Army Corps of Engineers requires renting a digger derrick truck and aerial lift bucket truck that meet the detailed technical specifications provided in an attachment, including a 47-foot digger derrick with hydraulic extending booms and a lifting capacity of 12,340 pounds. Quotes are due by 1:00 pm ET on April 21, 2023 and shall be emailed to the points of contact listed. Award will be made to the responsible offeror providing services that meet requirements at the lowest evaluated price. The NAICS code for this procurement is 532412 and the size standard is $40 million.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 1.pdf | ||
| RFQ.pdf | ||
| Solicitation Provisions and Clauses.pdf | ||
| Pricing Schedule.xlsx | XLSX spreadsheet | |
| PWS ENCLOSURE TWO AERIAL LIFT BUCKET TRUCK TECHNICAL SPECIFICATIONS.pdf | ||
| PWS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DIGGER DERRICK TRUCK TECHNICAL SPECIFICATIONS
1. General Vehicle Specifications: 47 foot Digger Derrick with hydraulic extending full capacity intermediate and upper booms. The vehicle shall meet standard specifications and include the following features:
a. Pole setting sheave height: 46.4 feet
b. Maximum horizontal reach from centerline of rotation: 37 feet
c. Digging radius from centerline of rotation: 17.9 to 26.7 feet
d. Lift capacity at 10 ft. radius: 12,340 lbs. (without optional equipment installed)
e. Boom articulation -20 to 80 degrees
f. Continuous rotation with high capacity worn gear drive gearbox
g. Insulated 46KV and below
h. Hydraulic overload protection system, which activates when the unit is exposed to an overload condition, and resets when overload condition is relieved. Overload protected functions include:
i. Boom lower
ii. Intermediate boom extend
iii. Third stage boom extend
iv. Winch raise
v. Digger dig
i. Load indicator gauge located at the main control panel
j. Electronic Controls
k. Foot throttle
l. Manual override of electronically controlled boom, winch, and digger functions at the main control valve
m. Standard/low speed selector
n. Proportional hydraulic control system
o. Hydraulic dump valve
p. Fiberglass third stage boom and boom tip with provisions for platform attachment
q. Transferable hydraulic pole guides and steel boom flares at the boom tip with adjustable alignment guides
r. Pole guide tilt interlock
s. Two part load line attachment point on the intermediate boom
t. Outriggers
u. Outrigger pads
v. Wheel chocks
w. Tool and equipment storage
2. Rear mount pedestal
a. Rear mount control seat with open view
3. Turntable mounted winch: Normal winch speed with 15,000lbs. bare drum capacity
a. Turntable winch speeds 34-47 fpm
b. Boom tip winch speeds 23-36 fpm
c. Load line swivel hook
4. Digger: two speed mechanical shift 12,000 ft.-lbs. to include all of the components necessary to operate digger, installed
5. Front mounted hydraulically operated winch to utilize wire take up reel and capstan accessories.
File details come from the government source that posted it. Updated .