PWS.pdf

PERFORMANCE WORK STATEMENT (PWS)

PART 1

1.0 GENERAL INFORMATION

1.1 This is a non-personal services contract to provide Lab Accreditation.

1.2 Description of services/introduction: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform laboratory accreditation services as defined in this Performance Work Statement (PWS) except for those items specified as government furnished property and services. The contractor shall perform to the standards in this PWS.

1.3 Background: The Defense Centers for Public Health-Aberdeen (DCPH-A) Laboratory Sciences Directorate’s (LAB) mission is to provide quality sample analysis data to allow decision makers to enhance Department of Defense (DoD) readiness and to assure the quality and effectiveness of the DCPH-A LAB. Laboratory accreditation is vital to provide certification and verification of the quality of the LAB analyses in its mission to support the soldiers, civilians, and military family members in the DoD community. These accreditations ensure the quality of analytical data produced by the DCPH-A LAB to help protect warfighter health and safety and ensure the warfighters readiness and lethality.

As part of the DCPH-A mission, the LAB performs analyses of environmental and biological samples in DoD operating environments and military bases to ensure the safety and security of all who work there. DA PAM 40-11 Preventive Medicine and CFR Title 32 National Defense Part 188 DoD Environmental Laboratory Accreditation Program mandate that the LAB obtain and maintain accreditations appropriate for their scope of testing and customer needs. A search conducted at the time of the submission of the contract did not identify any DoD regulations that have replaced the Department of the Army Regulation cited in this document, therefore per guidance provided by the DCPH-A, the LAB is to continue to follow the established Army Regulations.

1.4 Objectives:

• ISO 17025:2017 (General requirements for the competence of testing and calibration laboratories) accreditation for environmental and biological methods performed by the DCPH-A

LAB.

• Assessment of the environmental methods performed by the LAB against The NELAC Institute (TNI) Volume 1, Management and Technical Requirements for Laboratories Performing Environmental Analysis 2016 standards.

• DoD Environmental Laboratory Accreditation Program (ELAP) accreditation for Per-and Polyfluoroalkyl Substances (PFAS) methods EPA 533 and EPA 537.1

1.5 Scope: This contract is for third party accreditation of the DCPH-A LAB’s environmental and biological analytical methods performed by the LAB to the International Organization for Standardization (ISO) 17025:2017-General Requirements for the Competence of Testing and Calibration Laboratories standard, the DoD Environmental Laboratory Accreditation Program (ELAP) standard, and documented compliance of the LAB’s environmental analytical methods to TNI Volume 1, Management and Technical Requirements for Laboratories Performing Environmental Analysis 2016 standard.

1.6 Period of Performance (PoP):

The periods of performance for this contract are as follows:

Base period 31 March 2026 – 30 March 2027 Option period 1 31 March 2027 – 30 March 2028 Option period 2 31 March 2028 – 30 March 2029 Option Period 3 31 March 2029 – 30 March 2030 Option Period 4 31 March 2030 – 30 March 2031

1.7 Administrative specifications

1.7.1 Place of performance: The work to be performed under this contract will primarily be performed at the contractor’s facility but will include services at the DCPH-A LAB located at 8300 Ricketts Point Road, Bldg. E-2850, Aberdeen Proving Ground, MD 21010 for the onsite assessment portions of the requirement.

1.7.2 Recognized Federal holidays:

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Juneteenth Day Christmas Day Independence Day

1.7.3 Hours of operation: The contractor is responsible for conducting business Monday through Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons.

1.8 Contractor travel: The contractor shall be required to travel to the DCPH-A LAB located at 8300 Ricketts Point Road, Bldg. E-2850, Aberdeen Proving Ground, MD 21010 for the onsite assessment portions of the requirement. Contractor shall be authorized travel expenses consistent with the cost principles and procedures in Federal Acquisition Regulation (FAR) Part 31.2, Travel Costs and the limitations of funds specified in this contract. All travel requires Government approval/authorization and notification to the Contracting Officer Representative

(COR).

1.9 Other Direct Costs (ODC): Regulatory Compliance and Ethics Review (Permitting Fees)

1.10 Quality

1.10.1 Quality assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan provides a systematic method for the Government to evaluate performance and to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.11 Government’s COR: The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the contractor performs the technical requirements of the contract; perform inspections necessary in connection with contract performance; maintain written and oral communications with the contractor concerning technical aspects of the contract; issue written interpretations of technical requirements, including Government drawings, designs, specifications; monitor contractor's performance and notifies both the CO and contractor of any deficiencies; coordinate availability of government furnished property; and provide site entry of contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting contract.

1.11.1 Post award conference/periodic progress meetings: The contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with FAR Subpart 42.5. The CO, COR/Alternate Contractor Officer’s Representative (ACOR), and other Government personnel, as appropriate, may meet periodically with the contractor to review the contractor's performance. At these meetings the CO will apprise the contractor of how the Government views the contractor's performance and the contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.

1.11.2 Government’s ACOR: The ACOR performs the duties of the COR in the absence of the COR.

1.12 Contractor Identification

1.12.1 Contractor personnel performing services in a contractor capacity in a Government facility are required to possess and wear an identification badge that displays his or her name and the name of their company.

1.13 Personnel Security

1.13.1 All Contractor employees, including subcontractor employees requiring access to military facilities, who are employed under the contract shall complete the following training.

1.13.1.1 Anti-Terrorism (AT) Level I Training. All Contractor employees, including subcontractor employees, requiring access to Defense Health Headquarters (DHHQ), Direct Reporting Markets (MTFs), Small Markets and Stand Alone (SSO) facilities and controlled access areas, shall complete AT Level I awareness training within 30 calendar days of the start date of an on-site assessment. The Contractor shall submit certificates of completion for each affected Contractor employee and subcontractor employee, to the COR no later than five (5) prior to access to military installation. AT Level I awareness training is available at the following website: http://jko.jten.mil. See Attachment 2, Deliverable Schedule Table

1.13.1.2 Access and general protection/security policy and procedures. Contractor and all associated sub-contractors’ employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office.

Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by Department of Defense (DoD), DHHQ and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in Contractor security matters or processes.

1.13.1.3 For Contractors that do not require CAC but require access to a DoD facility or installation. Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCICIII) and Terrorist Screening Database (TSDB), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by Government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

1.13.1.4 iWATCH Training. The contractor and all associated subcontractors shall brief all employees on the local Suspicious Activity Training program (training standards provided by the requiring activity ATO). This locally developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 30 calendar days of the start date of an on-site assessment. Verification of the training shall be provided to the COR no later than five (5) days prior to access to military installation. iWATCH training is available at https://armyeitaas.sharepoint-mil.us/:p:/r/sites/HQDA-PMG- ATEP/_layouts/15/Doc.aspx?sourcedoc=%7BC3E7F067-1A15-4F58-9795- 1E65C4D9B5E5%7D&file=iWATCH%20Trng%20for%20Contractors%20(6APR15).pp tx&action=edit&mobileredirect=true See Attachment 2, Deliverable Schedule Table https://armyeitaas.sharepoint-mil.us/:p:/r/sites/HQDA-PMG-ATEP/_layouts/15/Doc.aspx?sourcedoc=%7BC3E7F067-1A15-4F58-9795-1E65C4D9B5E5%7D&file=iWATCH%20Trng%20for%20Contractors%20(6APR15).pptx&action=edit&mobileredirect=true https://armyeitaas.sharepoint-mil.us/:p:/r/sites/HQDA-PMG-ATEP/_layouts/15/Doc.aspx?sourcedoc=%7BC3E7F067-1A15-4F58-9795-1E65C4D9B5E5%7D&file=iWATCH%20Trng%20for%20Contractors%20(6APR15).pptx&action=edit&mobileredirect=true https://armyeitaas.sharepoint-mil.us/:p:/r/sites/HQDA-PMG-ATEP/_layouts/15/Doc.aspx?sourcedoc=%7BC3E7F067-1A15-4F58-9795-1E65C4D9B5E5%7D&file=iWATCH%20Trng%20for%20Contractors%20(6APR15).pptx&action=edit&mobileredirect=true https://armyeitaas.sharepoint-mil.us/:p:/r/sites/HQDA-PMG-ATEP/_layouts/15/Doc.aspx?sourcedoc=%7BC3E7F067-1A15-4F58-9795-1E65C4D9B5E5%7D&file=iWATCH%20Trng%20for%20Contractors%20(6APR15).pptx&action=edit&mobileredirect=true

PART 2

2.0 APPLICABLE PUBLICATIONS/ INSTRUCTIONS

2.1 Applicable Publications, DHA Administrative Instructions, etc.

2.1.1 Army Public Health Program (DA PAM 40-11).

2.1.2 DoD Environmental Laboratory Accreditation Program (32 Code of Federal Regulations Part 188).

2.1.2 CFR Title 32 National Defense Part 188 DoD Environmental Laboratory Accreditation Program

PART 3

3.0 SPECIFIC TASKS

3.1 The contractor shall accredit the DCPH-A LAB for the parameters and methods to the applicable standards identified in this PWS as requested.

3.1.1 The contractor shall accept LAB’s current accreditations and scopes to the applicable standards identified in this PWS in Attachments #3 and #4 in this PWS.

3.1.2 The contractor shall extend expiration date on LAB’s current accreditations and scopes, as long as the LAB is in good standing, until assessment by contractor has been completed to ensure no lapses in LAB’s accreditations.

3.1.3 The contractor shall provide COR with documentation of accreditation (to include certificates and scopes) with new expiration date for current accreditations within 3 (three) business days of contract’s award.

3.1.4 The contractor shall notify LAB of requirements for submission of accreditation renewal applications and suspense dates for submission of applications.

3.2 The contractor shall perform assessment of DCPH-A LAB against the ISO 17025:2017 standard and TNI:2016 standards.

3.2.1 The contractor shall work with LAB through the COR to schedule onsite assessment (bi-annual assessment of laboratory technical operations and quality management system) of LAB to occur at mutually agreed upon dates.

3.2.2 The contractor shall perform assessments for LAB’s accreditations and scopes during the same onsite visit.

3.2.3 The contractor shall provide qualified and appropriately certified auditors to perform the required onsite assessments.

3.2.4 The contractor shall provide a final verbal out-brief upon completion of the onsite assessments.

3.2.5 The contractor shall provide a final detailed written assessment report identifying the outcome of the assessment to the COR within 30 calendar days of assessment completion. See Attachment 2, Deliverable Schedule Table

3.2.6 The contractor shall provide documentation of accreditation (to include certificate and scope) with new accreditation dates to the COR following completion of the assessment within 5 (five) business days of Contractor acceptance of any corrective actions from the LAB following completion of the assessment. See Attachment 2, Deliverable Schedule Table

3.2.7 The contractor shall reference the schedule in Attachment #6 in this PWS that details the LAB’s accreditations, Field of Testing, expiration of accreditations, last onsite audit, and next required assessment.

3.3 The contractor shall accredit published methods and internally developed methods on additional environmental and biological scopes as requested by LAB (i.e., requests for scope expansions).

3.3.1 The contractor shall allow LAB through the COR to seek information regarding scope expansions for accreditation of additional methods and/or parameters/analytes/organisms that may be either a published method or an internally developed method that the LAB does not already have on scope. Requests for scope expansion is anticipated 1-2 times a year.

3.3.2 The contractor shall provide a process to the LAB that outlines the requirements for the addition of these new methods and/or parameters/analytes/organisms. This process shall detail whether an on-site assessment would be required.

3.3.3 The contractor shall provide a quote to the COR for any associated costs for the scope expansion request within 14 business days of request. Once approved by the COR and sufficient funding exists, the Contractor agrees to add new testing methods and/or parameters/analytes/organisms to the scope within 30 calendar days of receiving complete and accurate verification/validation packets or completion of any required onsite assessment and subsequent corrective action resolution as deemed necessary by the Contractor and provide updated scope to COR. See Attachment 2, Deliverable Schedule Table.

3.4 The contractor shall accredit the DCPH-A LAB for the parameters and methods identified in this PWS to DoD ELAP.

3.4.1 Contractor shall allow LAB through the COR to seek information to apply for DoD ELAP accreditation for methods identified in this PWS for the LAB. See Attachment #6 in this PWS.

3.4.2 Upon receipt and acceptance of LAB’s application for DoD ELAP accreditation, the contractor shall work with the COR to schedule the on-site assessment of LAB’s compliance to the DoD ELAP standards, to occur at mutually agreed upon dates.

3.4.3 The contractor shall provide qualified and appropriately certified auditors to perform the required on-site assessments.

3.4.4 The contractor shall provide a final verbal out-brief upon completion of the onsite assessments.

3.4.5 The contractor shall provide a final detailed written assessment report identifying the outcome of the assessment to the COR within 30 calendar days of assessment completion. See Attachment 2, Deliverable Schedule Table

3.4.6 The contractor shall provide documentation of accreditation (to include certificate and scope) to the COR following completion of the assessment within five (5) business days of contractor acceptance of any corrective actions from the LAB following completion of the assessment. See Attachment 2, Deliverable Schedule Table

3.4.7 Once accredited, contractor shall work with, through the COR, to schedule any surveillance activities (e.g., one year follow up on-site assessment) required by the Contractor for the LAB to maintain DoD ELAP accreditation.

3.5 Special Qualifications:

3.5.1 The contractor shall be recognized by the U.S. DoD ELAP to accredit laboratories to the DoD ELAP standard.

3.5.2 The contractor shall be an accreditation body that is a signatory to the International Laboratory Accreditation Cooperation (ILAC) Mutual Recognition Arrangement (MRA) to assess and accredit laboratories to the ISO 17025 standard.

3.5.3 The Contractor shall have the ability to assess the LAB for compliance to the TNI Volume 1 Management and Technical Requirements for Laboratories Performing Environmental Analysis 2016 Standard.

PART 4

4.0 DELIVERABLES – Reference Attachment 2 for Delivery schedule

4.1 Reports and Documents - Reports and documents delivered by the Contractor in the performance of this contract shall be considered Technical Data. All documentation shall reflect the latest version of the work product or activity, unless specifically directed otherwise by the Government. All documentation shall be prepared in accordance with (IAW) standard industry practices, ensuring electronically produced documents which reflect logical flow of material, tables of contents indexes and page numbering. Where applicable, the Contractor’s attention is called to the availability of commercial, industry, federal, and military guides, instructions, and standards for many of the topics addressed in this PWS and under this contract.

4.2 Inspection and Acceptance - The COR delegated oversight of specific technical, functional and oversight responsibilities is responsible for inspection and acceptance of all services, incoming shipments, documents, and services. Certification by the Government of satisfactory services provided is contingent upon the Contractor performing in accordance with the performance standards contained in the Performance Work Statement and all terms and conditions of this order, including all modifications.

PART 5

5.0 OTHER TERMS, CONDITIONS AND PROVISIONS

5.1 Non-Personal Services

This PWS identifies services that are strictly non-personal in nature, as defined by Federal Acquisition Regulation (FAR) Part 37, Service Contracting. To ensure there is no appearance of any personal services, the Government shall neither supervise Contractor personnel nor control the method by which the Contractor performs the required tasks. Under no circumstances shall the Government assign tasks or prepare work schedules for individual Contractor personnel. It shall be the responsibility of the Contractor to manage its personnel and to guard against any actions that give the perception of personal services. If the Contractor believes that any actions constitute, or are perceived to constitute personal services, it shall be the Contractor's responsibility to notify the Contractor Officer (KO) immediately.

5.2 Severable / Non-Severable Services

This award identifies services that are severable in nature.

5.3 Inherently Governmental Functions

This requirement has been reviewed and contains no services that are inherently governmental functions.

5.4 Invoices

The Contractor shall submit invoices monthly to Wide Area Work Flow (WAWF) with sufficient documentation to provide certification of invoice.

The Contractor is responsible for properly preparing and forwarding to the appropriate Government official, the invoice and receiving report for payment. The Contractor shall attach back up information to receiving reports for direct labor and Other Direct Costs (ODCs). Direct labor backup information shall reflect the person’s name, job title and quantity of hours worked for each pay period at a minimum. Backup information for ODCs shall list all elements of costs, such as travel breakout backup, including itinerary, dates of travel, name of employees traveling plus per diem costs shall accompany the receiving report. Equipment purchases are not authorized under this contract. The Wide Area Workflow – Receipt and Acceptance application is the required method of submission.

Where applicable, Contractor will include additional ODC invoice details as required per protocol for any volunteer payments in support of this PWS.

5.5 Dissemination of Information/Publishing

There shall be no dissemination or publication, except within and between the Contractor and any Subcontractors or specified Integrated Product/Process Team (IPT) members who have a need to know, of information developed under this order or contained in the reports to be furnished pursuant to this order without prior written approval of the COR or the Contracting Officer.

5.6 Contractor Identification

The Contractor shall ensure that Contractor personnel identify themselves as Contractors when attending meetings, answering Government telephones, providing any type of written correspondence, or working in situations where their actions could be construed as official Government acts. Contractors may not use or allude to former or current military rank during the performance of this work.

5.7 Attendance at Meetings

Contractor personnel may be required to attend meetings or otherwise communicate with Government and/or other contract or assistance agreement representatives to meet the requirements of this order. Contractor personnel shall make their Contractor status known during introductions.

ATTACHMENT 1

PERFORMANCE REQUIREMENTS SUMMARY

The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

Performance Objective (The Service required—usually a shall statement from Part 5)

PWS Reference Acceptable Quality Level (AQL) (This is the maximum error rate. It could possibly be “Zero deviation from standard”)

Method of Surveillance

Performance Requirements Summary (PRS) # 1.

The contractor shall provide the COR with certificates and scopes of accreditation with new expiration date for current accreditations and scopes within three (3) business days of contract’s award.

PWS Part 3.

Section 3.1.3

Zero Deviation from Standard

100% inspection of documents by the COR.

PRS # 2

The contractor shall provide the COR with a written assessment report identifying the outcome of the assessment within 30 calendar days of audit completion.

Section 3.2.5

No more than 1 report later than 30 days after audit completion.

100% inspection of documents by the COR.

PRS # 3 The contractor shall provide the COR documentation of accreditation (to include certificate and scope) with new accreditation dates following completion of assessment within five (5) business calendar days of contractor acceptance of any corrective actions from the LAB following completion of the assessment.

Section 3.2.6

Zero Deviation from Standard.

100% inspection of documents by the COR.

PRS # 4

The contractor shall provide quote for any requested scope expansions within 14 business days of request.

Section 3.3.3

No more than 1 quote received later than 14 business days of request.

100% inspection

PRS #5

The contractor shall provide an updated scope reflecting scope expansion within 30 calendar days of receiving complete and accurate scope expansion application or completion of any required onsite or remote assessment and subsequent corrective action resolution as deemed necessary by the contractor.

PWS Part 3.

Section 3.3.3

Zero Deviation from Standard.

100% inspection of documents by the COR.

PRS # 6

The contractor shall provide the COR with a written assessment report identifying the outcome of the assessment within 30 calendar days of audit completion.

Section 3.4.5

No more than 1 report later than 30 days after audit completion.

100% inspection of documents by the COR.

PRS # 7

The contractor shall provide the COR documentation of accreditation (to include certificate and scope) with new accreditation dates following completion of assessment within five (5) business calendar days of contractor acceptance of any corrective actions from the LAB following completion of the assessment.

Section 3.4.6

Zero Deviation from Standard.

100% inspection

ATTACHMENT 2

DELIVERABLE SCHEDULE TABLE

Deliverable Frequency Medium/Format Submit

To Appliable To

Anti-Terrorism (AT) Level I Training Certificate

Within 30 calendar days of the start date of an on-site assessment

Electronic COR 1.17.1.1 iWATCH Training certificate

Within 30 calendar days of the start date of an on-site assessment

Electronic COR 1.17.1.4

Certificates and scopes of accreditation with new expiration date for current accreditations and scopes.

Within 3 (three) business days of contract’s award.

Electronic COR 3.1.3

Final written assessment report identifying the outcome of the assessment.

Within 30 calendar days of assessment completion.

Electronic COR 3.2.5

Certificates and scopes with new accreditation dates

Within five (5) business days of Contractor acceptance of any corrective actions from the LAB following completion of the assessment.

Electronic COR 3.2.6

Quote for any requested scope expansions.

Within 14 business days of request

Electronic COR 3.3.3

Updated scope reflecting scope expansion.

Within 30 calendar days of receiving complete and accurate scope expansion application or completion of any required onsite or remote assessment and subsequent corrective action resolution as deemed necessary by the Contractor.

Electronic COR 3.3.3

Final written assessment report identifying the outcome of the assessment.

Within 30 calendar days of assessment completion.

Electronic COR 3.4.5

Certificate and scope

Within five (5) business days of Contractor acceptance of any corrective actions from the LAB following completion of the assessment.

Electronic COR 3.4.6

ATTACHMENT 3

LIST OF ENVIRONMENTAL PARAMETERS, METHODS, AND MATRICES

Environmental Scope Requiring ISO 17025:2017 Accreditation and Recognition of Successful Assessment with the 2016 TNI Standard

Parameter/Analyte Potable Water Non-Potable

Water Solid Hazardous Waste Aqueous Solid

Metals

Aluminum EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.7

EPA 200.8

----------------- EPA 3050B EPA

6010B

Antimony EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Arsenic EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Barium EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Beryllium EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Boron EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Cadmium EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Calcium EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Chromium EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Calcium Hardness (as CaCO3)

SM2340B ------------------- ----------------- -------------------

Cobalt EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Copper EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Iron EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Lead EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Magnesium EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Manganese EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

Mercury

EPA 200.8

EPA 245.1

EPA 245.1 ----------------- EPA 7471B

Modified

Molybdenum

EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Nickel EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Potassium EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Selenium EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Silver EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

Sodium

EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Strontium EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Thallium EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Tin EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Titanium EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Uranium EPA 200.2

EPA 200.8

Total Hardness (as CaCO3)

SM2340B ------------------- ----------------- -------------------

Vanadium EPA 200.2

EPA 200.8

EPA 200.2

EPA 200.8

----------------- EPA 3050B

EPA 6010B

Zinc EPA 200.2

EPA 200.7

EPA 200.2

EPA 200.7

----------------- EPA 3050B

EPA 6010B

Nutrients Nitrate (as N) EPA 300.0 ------------------- ----------------- ------------------- Nitrite (as N) EPA 300.0 ------------------- ----------------- ------------------- Orthophosphate (as P) EPA 300.0 ------------------- ----------------- ------------------- Demands

Total Organic Carbon EPA 415.3 EPA 415.3 ----------------- ------------------- Wet Chemistry Alkalinity SM 2320B SM 2320B ----------------- ------------------- Ammonia EPA 350.1 EPA 350.1 ----------------- ------------------- Bromide EPA 300.0 ------------------- ----------------- ------------------- Chloride EPA 300.0 ------------------- ----------------- -------------------

Color SM 2120B Modified

SM 2120B

Modified

Conductivity SM 2510B SM 2510B ----------------- ------------------- Fluoride EPA 300.0 ------------------- ----------------- ------------------- Nitrite plus Nitrate (as N) NECi N07-0003 NECi N07-0003 ----------------- -------------------pH SM 4500 H+B SM 4500 H+B ----------------- ------------------- Sulfate EPA 300.0 ------------------- ----------------- ------------------- Total Phosphorus EPA 365.1 EPA 365.1 ----------------- ------------------- Turbidity EPA 180.1 EPA 180.1 ----------------- ------------------- Microbiology Heterotrophic Plate Count (48hr Incubation)

Simplate Simplate ----------------- -------------------

Total Coliforms and Escherichia coli (24hr Incubation)

SM9223B

Colilert Quantitative

SM9223B

Colisure Quantitative

Purgeable Organics (Volatiles) Acetone ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Acrylonitrile ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Allyl chloride ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Benzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Bromobenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Bromochloromethane

EPA 524.2

EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Bromodichloromethane EPA 524.2

EPA 5030B

EPA 5030B

EPA 8260B

Bromoform EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Bromomethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

2-Butanone ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

n-Butylbenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

sec-Butylbenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

tert-Butylbenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

Carbon disulfide ------------------- EPA 5030B

EPA 5030B

EPA 8260B

Carbon tetrachloride EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Chloroacetonitrile ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Chlorobenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1-Chlorobutane ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Chloroethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Chloroform EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Chloromethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

2-Chlorotoluene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

4-Chlorotoluene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Dibromochloromethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,2-Dibromo-3-chloropropane

(DBCP)

EPA 524.2

EPA 504.1

EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,2-Dibromoethane (EDB) EPA 524.2

EPA 504.1

EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Dibromomethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,2-Dichlorobenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,3-Dichlorobenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,4-Dichlorobenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

trans-1,4-Dichloro-2-butene ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Dichlorodifluoromethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,1-Dichloroethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,2-Dichloroethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,1-Dichloroethene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

cis-1,2-Dichloroethene EPA 524.2 EPA 5030B

EPA 5030B

EPA 8260B

trans-1,2-Dichloroethene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,2-Dichloropropane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,3-Dichloropropane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

2,2-Dichloropropane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,1-Dichloropropene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

cis-1,3-Dichloroproprene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

trans-1,3-Dichloropropene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Ethyl benzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Ethyl ether ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Ethyl methacrylate ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Hexachlorobutadiene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Hexachloroethane ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

2-Hexanone ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Iodomethane ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Isopropylbenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

4-Isopropyltoluene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Methyl acrylate ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Methylacrylonitrile ------------------- EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Methylene chloride EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Methyl methacrylate ------------------ EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

4-Methyl-2-pentanone ------------------ EPA 5030B

EPA 8260B

EPA 5030B

Methyl-t-butyl ether ------------------ EPA 5030B

EPA 5030B

EPA 8260B

Naphthalene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

2-Nitropropane ------------------ EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Propionitrile ------------------ EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

n-Propylbenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Styrene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,1,1,2-Tetrachloroethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,1,2,2-Tetrachloroethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Tetrachloroethene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Tetrahydrofuran ------------------ EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Toluene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Total Trihalomethanes

(TTHM)

EPA 524.2 ------------------ ----------------- ------------------

1,2,3-Trichlorobenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,2,4-Trichlorobenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,1,1-Trichloroethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,1,2-Trichloroethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Trichloroethene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Trichlorofluoromethane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,2,3-Trichloropropane EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,2,4-Trimethylbenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

1,3,5-Trimethylbenzene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Vinyl chloride EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

m/p-Xylene EPA 524.2 EPA 5030B

EPA 5030B

EPA 8260B

o-Xylene EPA 524.2 EPA 5030B

EPA 8260B

EPA 5030B

EPA 8260B

Xylenes-total EPA 524.2 ------------------ ----------------- ------------------ Extractable Organics (Semivolatiles) Acenaphthene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Acenapthylene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Anthracene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Benzo(a)anthracene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Benzo(b)fluoranthene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Benzo(k)fluoranthene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Benzo(ghi)perylene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Benzo(a)pyrene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Benzyl alcohol ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

4-Bromophenyl-phenylether ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Butyl benzyl phthalate DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

4-Chloroaniline ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

bis(2-Chloroethyl)ether ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

bis(2-Chloroethoxy)methane ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

bis(2-Chloroisopropyl)ether ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

4-Chloro-3-methylphenol ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2-Chloronapthalene ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2-Chlorophenol ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

4-Chlorophenyl-phenylether ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Chrysene DLS 209 EPA 3510C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Dibenzo(a,h)anthracene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Dibenzofuran ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

1,2-Dichlorobenzene ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

1,3-Dichlorobenzene ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

1,4-Dichlorobenzene ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2,4-Dichlorophenol ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Diethylphthalate DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2,4-Dimethylphenol ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Dimethylphthalate DLS 209 EPA 3510C

EPA 8270C

EPA 3510

EPA 8270C

EPA 3545A

EPA 8270C

Di-n-butylphthalate DLS 209 EPA 3510C

EPA 8270C

EPA 3510

EPA 8270C

EPA 3545A

EPA 8270C

4,6-Dinitro-2-methylphenol ------------------- EPA 3510C

EPA 8270C

EPA 3510

EPA 8270C

EPA 3545A

EPA 8270C

2,4-Dinitrophenol ------------------- EPA 3510C

EPA 8270C

EPA 3510

EPA 8270C

EPA 3545A

EPA 8270C

2,4-Dinitrotoluene ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2,6-Dinitrotoluene ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Di-n-octylpthalate ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Bis(2-Ethylhexyl)adipate DLS 209 ------------------ ----------------- ------------------ Bis(2-Ethylhexyl)phthalate DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Fluoranthene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Fluorene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Hexachlorobenzene DLS 209

EPA 505

EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Hexachlorobutadiene ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

Hexachlorocyclopentadiene EPA 505 EPA 3510C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Hexachloroethane ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Indeno(1,2,3-cd)pyrene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Isophorone ------------------ EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2-Methylnapthalene ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2-Methylphenol ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

3,4-Methylphenol ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Naphthalene ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2-Nitroaniline ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

3-Nitroaniline ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

4-Nitroaniline ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Nitrobenzene ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2-Nitrophenol ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

4-Nitrophenol ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

n-Nitrosodimethylamine ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

n-Nitrosodiphenylamine ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

n-Nitroso-di-n-propylamine ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Pentachlorophenol EPA 515.3 EPA 3510C

EPA 8270C

EPA 8151A

EPA 3510C

EPA 8270C

EPA 8151A

EPA 3545A

EPA 8270C

DLS 129

Phenanthrene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Phenol ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Picloram EPA 515.3 EPA 8151A EPA 8151A DLS 129 Pyrene DLS 209 EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

trans-Nonachlor DLS 209 ------------------- ----------------- ------------------ 1,2,4-Trichlorobenzene ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2,4,5-Trichlorophenol ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

2,4,6-Trichlorophenol ------------------- EPA 3510C

EPA 8270C

EPA 3510C

EPA 8270C

EPA 3545A

EPA 8270C

Pesticides-Herbicides-PCB's Acifluorfen EPA 515.3 EPA 8151A EPA 8151A DLS 129 Alachlor DLS 209

EPA 505

Aldicarb EPA 531.2 EPA 531.2 ----------------- ------------------ Aldicarb sulfone EPA 531.2 EPA 531.2 ----------------- ------------------ Aldicarb sulfoxide EPA 531.2 EPA 531.2 ----------------- ------------------ Aldrin EPA 505 ------------------ ----------------- ------------------ Atrazine EPA 505 ------------------- ----------------- ------------------ Baygon (Propoxur) EPA 531.2 EPA 531.2 ----------------- ------------------ Bentazon EPA 515.3 EPA 8151A EPA 8151A DLS 129 gamma-BHC(Lindane) EPA 505 ------------------ ----------------- ------------------ Bromochloroacetic acid EPA 552.3 ------------------ ----------------- ------------------ Bromoacetic acid EPA 552.3 ------------------ ----------------- ------------------ Carbaryl EPA 531.2 ------------------ ----------------- ------------------ Carbofuran EPA 531.2 EPA 531.2 ----------------- ------------------ Chlordane (technical) EPA 505 ------------------ ----------------- ------------------ Chloramben EPA 515.3 EPA 8151A EPA 8151A ------------------alpha-Chlordane EPA 505 ------------------ ----------------- ------------------gamma-Chlordane EPA 505 ------------------ ----------------- ------------------

2,4-D EPA 515.3 EPA 8151A EPA 8151A DLS 129

Dalapon EPA 515.3 EPA 8151A EPA 8151A ------------------

2,4-DB EPA 515.3 EPA 8151A EPA 8151A DLS 129

DCPA diacid (chlorthal) EPA 515.3 ------------------ ----------------- ------------------ Dibromoacetic acid EPA 552.3 ------------------ ----------------- ------------------ Dicamba EPA 515.3 EPA 8151A EPA 8151A DLS 129 Dichloroacetic acid EPA 552.3 ------------------ ----------------- ------------------ 3,5-Dichlorobenzoic acid EPA 515.3 EPA 8151A EPA 8151A DLS 129 Dichloroprop EPA 515.3 EPA 8151A EPA 8151A DLS 129 Dieldrin EPA 505 ------------------ ----------------- ------------------ Dinoseb EPA 515.3 EPA 8151A EPA 8151A DLS 129 Diquat DLS 519 ------------------ ----------------- ------------------

Endothall EPA 548.1 ------------------ ----------------- ------------------ Endrin EPA 505 ------------------ ----------------- ------------------ Glyphosate EPA 547 EPA 547 ----------------- ------------------ Haloacetic acids (HAA5) EPA 552.3 ------------------ ----------------- ------------------ Heptachlor EPA 505 ------------------ ----------------- ------------------ Heptachlor epoxide EPA 505 ------------------ ----------------- ------------------ 3-Hydroxycarbofuran EPA 531.2 EPA 531.2 ----------------- ------------------

MCPA EPA 515.3 EPA 8151A EPA 8151A DLS 129

MCPP EPA 515.3 EPA 8151A EPA 8151A DLS 129

Methiocarb EPA 531.2 EPA 531.2 ----------------- ------------------ Methomyl EPA 531.2 EPA 531.2 ----------------- ------------------ Methoxychlor EPA 505 ------------------ ----------------- ------------------ Monochloroacetic acid EPA 552.3 ------------------ ----------------- ------------------ Oxamyl EPA 531.2 EPA 531.2 ----------------- ------------------ Paraquat DLS 519 ------------------ ----------------- ------------------ PCB-1016 (Aroclor) EPA 505 ------------------ ----------------- ------------------

PCB-1221 EPA 505 ------------------ ----------------- ------------------

PCB-1232 EPA 505 ------------------ ----------------- ------------------

PCB-1242 EPA 505 ------------------ ----------------- ------------------

PCB-1248 EPA 505 ------------------ ----------------- ------------------

PCB-1254 EPA 505 ------------------ ----------------- ------------------

PCB-1260 EPA 505 ------------------ ----------------- ------------------

Simazine EPA 505 ------------------ ----------------- ------------------ Toxaphene EPA 505 ------------------ ----------------- ------------------ 2,4,5-TP (Silvex) EPA 515.3 EPA 8151A EPA 8151A DLS 129

2,4,5-T EPA 515.3 EPA 8151A EPA 8151A DLS 129

Trichloroacetic acid EPA 552.3 ------------------ ----------------- ------------------ Radiochemistry Gamma EPA 901.1 EPA 901.1 EPA 901.1 ASTM C1402-98 Gross alpha EPA 900.0 EPA 900.0 EPA 9310 ------------------ Gross beta EPA 900.0 EPA 900.0 EPA 9310 ------------------ Cs-134 EPA 901.1 EPA 901.1 EPA 901.1 ASTM C1402-98 Cs-137 EPA 901.1 EPA 901.1 EPA 901.1 ASTM C1402-98 Co-60 EPA 901.1 EPA 901.1 EPA 901.1 ASTM C1402-98 Ra-226 EPA 600/4-75-

EPA 600/4-75-

Ra-228 EPA 520/5-

84/006 RA-05

EPA 520/5-

84/006 RA-05

Sr-90 SM 303 (13th Ed.)

SM 303

(13th Ed.)

Tritium SM 306 (13th Ed.)

SM 306

(13th Ed.)

Explosives Perchlorate EPA 331 ------------------ ----------------- ------------------

Radiochemistry Wipes Air Filter

Cs-134 DLS 408 DLS 408 Cs-137 DLS 408 DLS 408 Co-60 DLS 408 DLS 408 Gamma DLS 408 DLS 408 Gross alpha DLS 437 DLS 437 Gross beta DLS 437 DLS 437 Ni-63 DLS 414 DLS 414 Tritium DLS 411 DLS 411 Zn-65 DLS 408 DLS 408

ATTACHMENT 4

LIST OF BIOLOGICAL PARAMETERS, METHODS, AND MATRICES

Biological Scope Requiring ISO 17025:2017 accreditation.

Parameters/Organism Matrix Test(s) Anaplasma phagocytophilum Ticks DLS 859, DLS 876 Babesia microti Ticks DLS 859, DLS 876 Borrelia burgdorferi Ticks DLS 859, DLS 876 Borrelia mayonii Ticks DLS 859, DLS 876 Borrelia miyamotoi Ticks DLS 859, DLS 876 Ehrlichia chaffeensis Ticks DLS 859, DLS 876 Ehrlichia ewingii Ticks DLS 859, DLS 876 Ehrlichia muris eauclairensis Ticks DLS 859, DLS 876 Francisella tularensis Ticks DLS 859, DLS 876 Panola Mountain Ehrlichia Ticks DLS 859, DLS 876 Powassan Virus Ticks DLS 859, DLS 876 Rickettsia parkerii Ticks DLS 859, DLS 876 Rickettsia rickettsia Ticks DLS 859, DLS 876 SARS-CoV-2 Wastewater DLS 817, DLS 819

ATTACHMENT 5

LIST OF PARAMETERS, METHODS, AND MATRICES REQUIRING DoD ELAP

ACCREDITATION

Parameter/Analyte Potable Water Non-Potable Water

Solid Hazardous Waste Aqueous Solid

N-ethyl perfluorooctanesulfonamidoacetic acid

EPA 537.1 ---------------- ----------------- ----------------

N-methyl perfluorooctanesulfonamidoacetic acid

EPA 537.1 ---------------- ----------------- ----------------

Perfluorotetradecanoic acid EPA 537.1 ---------------- ----------------- ---------------- Perfluorotridecanoic acid EPA 537.1 ---------------- ----------------- ---------------- 11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid

EPA 533

9-Chlorohexadecafluoro-3-oxanonane-1-sulfonic acid

EPA 533 ---------------- ----------------- ----------------

4,8-Dioxa-3H-perfluorononanoic acid

EPA 533 ---------------- ----------------- ----------------

Hexafluoropropylene oxide dimer acid

EPA 533 ---------------- ----------------- ----------------

Nonafluoro-3,6-dioxaheptanoic acid EPA 533 ---------------- ----------------- ---------------- Perfluorobutanoic acid EPA 533 ---------------- ----------------- ---------------- Perfluorobutanesulfonic acid EPA 533 ---------------- ----------------- ---------------- 1H,1H, 2H, 2H-Perfluorodecane sulfonic acid

EPA 533 ---------------- ----------------- ----------------

Perfluorodecanoic acid EPA 533 ---------------- ----------------- ---------------- Perfluorododecanoic acid EPA 533 ---------------- ----------------- ---------------- Perfluoro(2-ethoxyethane)sulfonic acid

EPA 533 ---------------- ----------------- ----------------

Perfluoroheptanesulfonic acid EPA 533 ----------------- ----------------- ----------------- Perfluoroheptanoic acid EPA 533…