PWS Attachments - Exhibits.pdf

Technical Exhibit A General Location Map

Work area along Mississippi and Illinois Rivers

Technical Exhibit D-1 Contractor Contact Information

Technical Exhibit D-2

Contractor Available Equipment

Technical Exhibit D-3 Contractor Available Materials

Technical Exhibit D-4 Contractor Quality Control Plan

Technical Exhibit D-5

Contractor Accident Prevention Program

Technical Exhibit D-6

Contractor Accident Prevention Program Cont.

Technical Exhibit D-7 Contractor Job Hazard Analysis

ANNUAL PEST CONTROL REPORT

U.S. ARMY CORPS OF ENGINEERS

ST. LOUIS DISTRICT, RIVERS PROJECT OFFICE

Instructions on Back

PLANNED

OUTGRANT

ACTUAL YEAR

Name Number

APPLICATOR

Name Agency / Company Address City State Zip Phone Number ( ) License No.

AREA

County State

Area Measurement

Name Description

PEST

Description Quantity

PESTICIDE

Trade Name Quantity EPA Class EPA Reg.# Applications

Preparer Printed Name and Title Preparer Signature Date

OFFICAL USE ONLY Approved Disapproved

Approver Printed Name and Title Approver Signature Date

Reason for Disapproval / Notes on Approval

Technical Exhibit E-1

Instructions for Completing Annual Pest Control Report U.S. Army Corps of Engineers, St. Louis District, Rivers Project Office

Planned / Actual: Check either actual data for previous year or planned data for upcoming year.

Outgrant Name: If applicable, the agency, company or individual holding the lease, easement or permit.

Outgrant Number: If applicable, the lease, easement, or permit number.

Applicator Name / Agency / Company / Address / Phone Number: Pesticide applicator name, agency or company, address, and phone number.

Applicator License No. / State: Pesticide applicator license number and license state.

Area Measurement: Total measured area / volume of application area in acres, sq. yards, sq.

feet, cu. feet, etc.

Area Name: Application area common name, examples; River Access Area, Ag Field No. 24, Machinery compound, etc.

Area Description: Application area description, examples; restrooms, docks, shoreline riprap, cultivated field, food plot, levee, parking areas, fence line, trail, etc.

Pest Description: Target pests’ description, examples; Johnson grass, broadleaf weeds, woody vegetation, mosquitoes, spiders, mice, gophers, pigeons, etc.

Pest Quantity: Target pests estimated population by density, or other description, examples;

complete infestation, 4 plants / sq meter, 8 stems / acre, etc.

Pesticide Trade Name: Pesticide full trade name that appears on label, and common name if different than trade name.

Pesticide Quantity: Pesticide amount applied to the application area for each application described in gallons, quarts, pints, fluid ounces, etc.

Pesticide EPA Class: General-use or restricted-use. If restricted-use pesticide, include a written justification, including:

1. Specific reasons why a general-use pesticide cannot achieve an acceptable level of control.

2. Other technical guidance in the selection process, including specific contact names and recommendations received.

3. Specific actions taken to ensure that proper safeguards are employed in the application.

Pesticide EPA Reg. No.: Pesticide EPA registration number that appears on the label.

Pesticide Applications: Total number of pesticide applications for this area for the year.

Technical Exhibit E-2

Technical Exhibit F Boundary Line Work Specifications

4. Boundary Posts. Boundary posts shall be seven (7) foot, high tensile, high strength, hot-dip galvanized five sided flanged channel two (2) inch steel posts with three-eighths (3/8) inch pre-drilled holes, suitable for management and boundary signs placement.

5. Management Signs. Management signs shall be approved sign type, .080 gauge aluminum alloy, nine (9) inch by nine (9) inch, with reflective sheathing lettering and with two

(2) five-sixteenths (5/16} drilled holes to accommodate boundary posts.

6. Boundary Signs. Boundary signs shall be approved sign type, .080 gauge aluminum alloy, six (6) inch by six (6) inch, with reflective sheathing lettering and with two (2) five-sixteenths (5/16) drilled holes to accommodate boundary posts.

7. Boundary Post I Signs Placement. Boundary posts shall be placed;

(a) That a minimum of posts are placed, (b} On the boundary line,

(c) Seven (7) feet from all boundary line monuments, and

(1) Whenever the ground level obstructs the lower three (3) foot horizontal clearing limits, or

(2) Whenever the distance between boundary posts exceeds four hundred (400) feet.

(d) On public road and levee right-of-way lines,

(1) At the intersection of the boundary line,

(2) Seven (7) feet from the intersection of the boundary line offset from boundary lines within rights-of-way, and

(e) Whenever the distance between boundary posts exceeds four hundred (400) feet,

(f) Within five (5) degrees vertical,

(g) Within fifty-six (56) inches and fifty-two (52) inches extending above the ground surface,

(h) With the flanged side of the post open toward private property,

(i) With affixed management and/or boundary signs,

(1) With lettering facing private property,

(2) Within fifteen (15) degrees parallel of the boundary line,

(3) With the top of the top sign flush with the top of the boundary post, and

(4) With cap screws and nuts.

8. Witness Pots. Witness pos\s shall be five (5) foot six (6) inch, high tensile, high strength, hot-dip galvanized five sided flanged channel two (2) inch steel posts with three-eighths (3/8) inch pre-drilled holes, suitable for witness sign placement.

9. Witness Signs. Witness signs shall be approved sign type, .080 gauge aluminum alloy, three and three-quarter (3 3/4) inch by five and one-half (5 1/2) inch, with reflective sheathing lettering and with two (2) five-sixteenths (5/16) drilled holes to accommodate boundary posts.

10. Witness Post I Signs Placement. Witness posts shall be placed;

(a) Within six (6) inches of all line, reference and witness corner monuments,

(b) Within five (5) degrees of vertical,

(c) Within thirty-eight (38) inches and thirty-four (34) inches extending above the ground surface, (d With the flanged side of the post open toward private property,

(e) With affixed witness sign, {1) With lettering facing private property,

(2) With the top of the witness sign flush

(3) With the top of the witness post, and

(4) With cap screws and nuts.

11. Cap Screws ·and Nuts. Cap screws shall be five-sixteenths {5/16) inch diameter and one and one-half {1 1/2) inches length, zinc chromate coarse thread hex head standard strength low carbon steel grade two (2). Nuts shall be five sixteenths (5/16) inch zinc chromate coarse threaded steel full finished.

Exhibit F-1

RIVERS PROJECT BOUNDARY MAINTEANCE AND INSPECTION

REPORT FORM

Date:

Group No. / Work Area Personnel/Laborers:

Between Angle Point # and Angle Point # Coordinates: X Y Description of Problem:

Missing Monument Encroachment Other

Please Return Weekly.

Exhibit F-2

RIVERS PROJECT OFFICE BOUNDARY MAINTENANCE AND

INSPECTION MISSING ANGLE POINT MONUMENTS

Date:

Group No. / Work Area

AP#

Coordinates: X Y Notes:

Supervisor:

Exhibit F-3

RIVERS PROJECT BOUNDARY MAINTENANCE AND INSPECTION

NEXT WEEK’S WORK PROJECTION

Date:

Planned Group No. / Work Area

Planned hours of work for each day during the upcoming week:

Monday:

Tuesday Wednesday Thursday Friday

The following personnel will work during the upcoming week: