Purge Fluid SOW 1-8-2024.pdf
PDF 107 KB Posted
- Attached to
- AMXG Purge Fluid Federal contract opportunity
- Solicitation number
- FA822424Q0007
About this file
This statement of work and related solicitation specify the procurement of 7,500 gallons of Purge Fluid conforming to Mil-Spec MIL-PRF-38299E. The fluid must be delivered in a semi-tanker trailer to three locations at Hill Air Force Base in Utah within three weeks. The contractor must provide equipment for offloading the fluid including quick connect fittings and hosing compatible with the Air Force's holding tanks. Delivery times are specified as Monday through Thursday between 6:00 and 13:00 local time. The solicitation was issued by the Department of the Air Force Materiel Command Air Force Sustainment Center to fulfill its need for Purge Fluid to support aircraft maintenance operations at the 309th Aircraft Maintenance Group.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - FA822424Q0007.pdf | ||
| PURGING FLUID SDS.pdf | ||
| Purge Fluid MIL-PRF-38299E.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
309 Aircraft Maintenance Group
Purchase Specification
PURGE FLUID
1. The Contractor shall deliver 7,500 gallons +/- of Purge Fluid that shall conform to Mil-
Spec: MIL-PRF-38299E.
a. Part Number M38299 (Must be specific to Table 1 found in MIL-PRF-38299E pages 5-6).
2. No recycling required for this shipment.
3. Equipment required for off-loading Purge Fluid into 309 AMXG’s holding tank(s):
1. 2-inch cam-lock quick connect/disconnect pipefitting, compatible with the 309
AMXG holding tank(s) and system(s).
2. Minimum 20-feet of 3-inch approved fuel/purge fluid hosing with 3-inch Camlock fittings.
3. As an alternate, tanker shall have the ability to pump from tanker through its own pump into AMXG’s holding tanks in case the 309th AMXG holding tank’s pump is in-operable (INOP).
4. Driver must contact Government POC to provide Driver's License info to be sponsored on base through the Truck Gate the day before arrival to Hill AFB, Utah.
4. Acquisition Requirements:
a. Purge Fluid must be shipped in a semi-tanker trailer (no drums or small containers)
b. The following shall be provided:
i. Certificate of Conformance (COC)
ii. Bill of Lading
iii. Safety Data Sheet (SDS)
c. Delivery location(s) B286/287/680
i. Brad Sawley Gage Watts Building 236 Building 287, Building 680 5879 A Lane 5818 A Lane
HAFB, UT 84056 HAFB, UT 84056
d. Government POC:
i. Gage Watts (801) 499-9630 or Brad Sawley (801) 940-6276
e. Delivery: 3 Weeks ARO
f. Delivery times: Monday – Thursday 0600 to NLT 1300 (6am to 1pm Mountain
Daylight Time.)
g. Entry point: I-15 at Exit 338 Roy, UT (HAFB Gate)
h. Driver shall have valid Driver License and ability to pass a security check.
File details come from the government source that posted it. Updated .