Purchase Description (W80RA6-33-25C) PANRSA-25-P-0000 014826.pdf

87 KB Posted

Attached to
Torque Calibration System
Solicitation number
PANRSA25P0000014826
Issued by

About this file

Written by GovTribe AI ·

This Purchase Description outlines the U.S. Army Test, Measurement and Diagnostic Equipment Activity's (USATA) requirement to procure a Torque Calibration System for life-cycle replacement at Redstone Arsenal. The system must have a maximum measurement capability of 50K lbf-in, utilize data acquisition software for calibration reports, provide automated servo-controlled hydraulic operation, and include custom calibration adapters for Lebow model 2351-102 36K lb-in torque cells.

Key specifications include a NIST traceable 50K lbf-in transfer standard torque cell, on-site installation and training, and an uncertainty of 0.1% or better at 95% confidence level. The system must perform calibrations in both clockwise (compression) and counterclockwise (tension) modes. Delivery is specified to U.S. Army TMDE Activity, Attn: Bradford Suggs, Building 5435 Fowler Road, Redstone Arsenal, AL 35898. The procurement is part of a market research effort to identify potential sources for this specialized equipment.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Purchase Description

Procurement of Torque Calibration System

The U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) has a requirement to procure a brand name requirement to identify potential sources that can provide one (1) Torque Calibration System or equivalent for a life-cycle replacement for an older Lebow torque calibrator. The equipment shall be delivered to APSL, located at Building 5435, Fowler Road Redstone Arsenal. The Torque Calibration

System module shall include the following specifications or equivalent (if not brand name):

1.0 Requirements:

• Maximum measurement capability of 50K lbf-in

• Utilize data acquisition software to output a calibration report,

• Provide automated servo controlled hydraulic operation,

• Supply custom calibration adapters to complete calibrations on Lebow model 2351-102 36K lb-in torque cells

• Provide NIST traceable 50K lbf-in transfer standard torque cell

• On-site installation/training for personnel.

• The torque calibrator must have an uncertainty of 0.1% or better at 95% confidence level.

• The torque calibrator must also provide calibrations for the unit under test in clockwise (compression) and counterclockwise (tension) modes.

2.0 Delivery Requirements

Shipping Address: U.S. Army TMDE Activity, Attn: Bradford Suggs, Building 5435 Fowler Road, Redstone Arsenal, AL 35898

File details come from the government source that posted it. Updated .