Statement of Work (SOW): Maintenance & Motor Retrofit (Final Version) Project: Refurbishment of 104 Integrated Venetian Blinds Location: Office Building – Bern, Switzerland System Type: Warema Type 1.16/25/35.07 (24v motor) inside WICONA WICLINE Aluminum Composite Windows

1. Project Objective The contractor shall provide a turnkey solution for the inspection, repair, and motor retrofit of 104 integrated venetian blinds. The objective is to restore 100% motorized functionality while maintaining the thermal, acoustic, and aesthetic integrity of the WICONA window units.

2. Comprehensive Pricing & Scope The offer submitted by the contractor must be all-inclusive. No additional costs will be entertained after the contract award. The bid price shall include:

· Labor: All technician, electrician, and logistical personnel hours.

· Materials: All motors, cables, lift tapes, ladder cords, and hardware components.

· Equipment: All tools, specialized window opening devices, safety gear, and cleaning supplies.

· Transportation: All travel costs, vehicle expenses, and shipping/freight for parts.

· Fees: Disposal fees, administrative costs, and any required permits or insurance.

3. Logistics & Site Management

· Furniture Management: Contractor shall move office furniture and equipment as required to gain unobstructed access to the windows. All items must be protected and returned to their original positions upon completion.

· Surface Protection: Provide appropriate floor and wall protection during the transit of tools and components.

4. Health, Safety & Electrical Standards

· Qualified Personnel: Only certified electricians (per Swiss regulations) may perform electrical work.

· Lockout/Tagout (LOTO): A strict LOTO procedure must be implemented. Hazardous energy sources must be isolated, locked, and tagged before work commences.

· Verification: Zero-energy state must be verified via testing before physical contact with wiring.

· Controls: Each motor control shall be integrated into the Building KNX system.

5. Technical Execution: WICONA & Warema Systems

· Sash Access: Open the internal "sandwich" sash of the WICONA windows using the integrated latches.

· Hardware Maintenance: Inspect and lubricate all WICONA latching mechanisms and concealed hardware.

· Gasket Inspection: Verify the condition of internal gaskets. Damaged seals must be reported or replaced to ensure the cavity remains dust and moisture-free.

· Blind Retrofit:

· Identify and replace failed motors with compatible high-quality alternatives (e.g., Somfy, Elero) that fit the existing Warema headrails.

· Replace worn lift tapes and ladder cords as necessary to ensure smooth mechanical operation.

6. Commissioning & Integration

· Calibration: Set electronic end-limits (upper/lower) for every unit.

· Testing: Perform three full cycles (Up/Down/Tilt) per window to ensure defect-free operation.

· System Integration: Ensure new motors are integrated into the existing building control or radio systems.

7. Waste Disposal (Swiss Compliance)

· Swiss Codes: Disposal must comply with vREG/ORDEA (Electrical Waste) and VeVA/OMW (Waste Movements).

· Recycling: Deliver old motors and aluminum scrap to authorized SENS eRecycling or Swico collection points.

· Evidence: Contractor shall provide official disposal certificates (Entsorgungsnachweis).

8. Cleaning & Handover

· Internal Cleaning: Clean internal glass surfaces and aluminum slats before closing the sash.

· Final Report: Provide a list of all units serviced, including specific motor model numbers used.