PowerDrain-S100K.pdf
PDF 709 KB Posted
- Attached to
- Z2LZ--528A7-25-502 Replace Trench Drains
- Solicitation number
- 36C24226R0111
About this file
This is an ACO Drain product specification document for the PowerDrain S100K iron-edged channel system with longitudinal grate, an ADA-compliant surface drainage solution. The document provides comprehensive technical specifications, installation guidelines, and outlet flow rate data for this drainage system.
The PowerDrain S100K system features a polyester polymer concrete trench body with minimum compressive strength of 14,000 psi, flexural strength of 4,000 psi, and water absorption of 0.07 percent. The system is frost-proof, salt-proof, and resistant to dilute acids and alkalis. Channel units have a nominal 4-inch clear opening with overall width of 6.30 inches, wall thickness of at least 0.67 inches, and are manufactured with inverts sloped at 0.5 percent or neutral, featuring cast-in horizontal anchoring keys and integrally cast ductile iron edge rails at least 1/4 inch thick. Grates are manufactured from longitudinal ductile iron meeting ASTM 536-84 Grade 65-45-12 specifications. Available configurations include one-meter and half-meter channels, with invert depths ranging from 3.94 inches to 11.81 inches and weights from 43.7 to 115.6 pounds. The system includes optional components such as 6-inch oval inlet and outlet caps, catch basins (SK1-901D, SK1-621D, SK1-631D), end caps, debris strainers, and outlet adaptors. Outlet flow rates vary by configuration, ranging from 108 GPM to 1,065 GPM depending on outlet size and invert depth, with corresponding cubic feet per second measurements provided. Installation must comply with manufacturer's instructions and recommendations. ACO, Inc. maintains sales offices in the Northeast (Mentor, Ohio), West (Casa Grande, Arizona), and Southeast (Fort Mill, South Carolina) with contact information provided for technical inquiries.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Drawings Rev5. - Replace Trench Drains.pdf | ||
| 36C24226R0111 0002.docx | DOCX document | |
| 36C24226R0111 0001.docx | DOCX document | |
| PowerDrain-S200K.pdf | ||
| 36C24226R0111.docx | DOCX document | |
| FAR 52.225-2 BUY AMERICAN CERTIFICATE.docx | DOCX document | |
| Specs - 528A7-25-502 Replace Trench Drains.pdf | ||
| VAAR 852.219-75 LIMITATIONS ON SUBCONTRACTING CERTIFICATE.docx | DOCX document | |
| Drawings Rev4. - Replace Trench Drains.pdf | ||
| WAGE DETERMINATION.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A C
O S p e c i f i c a t i o n
I n f o r m a t i o n www.ACODrain.us
F
Note: These are the pipe flow rates at the specified outlet, NOT channel flow rates.
Catch basin flow rates are without trash bucket - using trash bucket reduces flow.
Outlet flow rates
| Outlet Product Outlet size Invert | GPM | CFS | |
| (Sch. 40) | Depth |
Bottom outlet - SK1-00 Bottom outlet - SK1-40 Bottom outlet - SK1-00 Bottom outlet - SK1-40 End outlet - SK1-20 End outlet - SK1-40 SK1-308-6 6” outlet cap SK1-408-6 6” outlet cap Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D Type SK1-901D
A A B B C C D E F G H I J K L M N O P Q R S T
3.94” 11.81”
3.94” 11.81”
7.87” 11.81”
9.84” 11.81” 19.87” 26.37” 25.87” 19.16” 26.29” 27.22” 20.11” 27.79” 20.65” 27.79” 27.22” 27.79” 21.30” 19.73” 27.79”
0.24 0.42 0.39 0.68 0.29 0.38 0.52 0.59 0.51 0.60 0.59 0.50 1.32 0.61 0.51 1.36 1.15 2.37 1.34 0.62 0.53 0.51 1.36
4” round 4” round 6” oval 6” oval 4” round 4” round 6” oval 6” oval 4” round 4” round 4” round 4” round 6” round 4” round 4” round 6” round 6” round 8” round 6” round 4” round 4” round 4” round 6” round
ACO DRAIN
PowerDrain - S100K iron edged channel system with longitudinal grate (ADA)
6.89“ (175mm) 8.86” (225mm) 10.83“ (275mm) 12.80” (325mm)
19.69" (0.5 meter)
SK1-0103
SK1-0203
SK1-0303
SK1-0403
10.06” (255mm)
19.69" (0.5 meter) 22.67” (576mm)
.0
3” (7 m m
5.98” (152mm) 3.94” (100mm)
3.94” (100mm) to
11.81” (300mm)
4.92” (125mm) to
12.80” (325mm)
5.98” (152mm) 3.94” (100mm)
39.37" (1 meter)
3.74” (95mm) 1.33” (34mm)
0.43” (11mm)
1.36” (34mm)
0.45” (11mm)
4 ‘PowerLok’ grate locking devices per trench
4 ‘PowerLok’ grate locking devices per trench
1.79” (45mm)
2.04” (52mm) F 900F 900
DIN F 900 DIN F 900
S100KS100K slot dimension slot dimension slot dimension slot dimension slot dimension
Half meter channel
One meter channel
End Caps 6” Oval inlet cap
Total capacity = 10.49 gallons.
Type 901D In-line catch basin
G
F
B A
C
D
E
H
I J
K
L M
N O
P
R
Q
S
T
April 2018
6” Oval outlet cap
Knock-outs included on every 5th channel B A
1.50” (38mm)
5.50” (140mm)
SK1-308-6
10.83” (275mm)
SK1-408-6
12.80” (325mm)
1.50” (38mm)
5.50” (140mm)
SK1-304-6
10.83” (275mm)
SK1-404-6
12.80” (325mm)
97052
.5
0" (3 m m ) m ax
0.125" (3mm)
1.85" (47mm)
Bell end to fit 4" Sch.
40 pipe
A C
O S p e c i f i c a t i o n
I n f o r m a t i o n www.ACODrain.us
Specifications
General The surface drainage system shall be ACO Drain PowerDrain S100K complete with longitudinal gratings secured with ‘PowerLok’ locking as manufactured by ACO, Inc. or equal approved.
Materials The trench system bodies shall be manufactured from polyester polymer concrete with minimum properties as follows:
| Compressive strength: | 14,000 psi |
| Flexural strength: | 4,000 psi |
| Water absorption | 0.07% |
| Frost proof | YES | |
| Salt proof | YES | |
| Dilute acid and alkali resistant | YES |
The nominal clear opening shall be 4” (100mm) with overall width of 6.30” (160mm). Pre-cast units shall be manufactured with either an invert slope of 0.5% or with neutral invert and have a wall thickness of at least 0.67” (16mm). Each unit will feature a partial radius in the trench bottom and a male to female interconnecting end profile. Units shall have horizontal cast in anchoring keys on the outside wall to ensure maximum mechanical bond to the surrounding bedding material and pavement surface.
The ductile iron edge rail will be integrally cast in by the manufacturer to ensure maximum homogeneity between polymer concrete body and edge rail. Each edge rail shall be at least 1/4” (6mm) thick.
Grates Grates are manufactured from longitudinal ductile iron. Ductile iron to ASTM 536-84 - Grade 65-45-12.
After removal of grates there shall be uninterrupted access to the trench to aid maintenance.
Installation The trench drain system shall be installed in accordance with the manufacturer’s installation instructions and recommendations.
F Description Part No. Inches2 mm2
Weight lbs.
SK1-00 Neutral channel - 39.37” (1m)1 70141 3.94 100 76.7 SK1-1 Sloped channel - 39.37” (1m) 70101 4.13 105 76.7 SK1-2 Sloped channel - 39.37” (1m) 70102 4.33 110 77.7 SK1-3 Sloped channel - 39.37” (1m) 70103 4.53 115 78.7 SK1-4 Sloped channel - 39.37” (1m) 70104 4.72 120 79.7 SK1-5 Sloped channel - 39.37” (1m)1 70105 4.92 125 80.7 SK1-6 Sloped channel - 39.37” (1m) 70106 5.12 130 81.7 SK1-7 Sloped channel - 39.37” (1m) 70107 5.31 135 82.7 SK1-8 Sloped channel - 39.37” (1m) 70108 5.51 140 83.7 SK1-9 Sloped channel - 39.37” (1m) 70109 5.71 145 84.7 SK1-10 Sloped channel - 39.37” (1m)1 70110 5.91 150 85.7 SK1-010 Neutral channel - 39.37” (1m)1 70143 5.91 150 85.7 SK1-0103 Neutral channel - 19.69” (0.5m)1 70144 5.91 150 43.7 SK1-11 Sloped channel - 39.37” (1m) 70111 6.10 155 86.7 SK1-12 Sloped channel - 39.37” (1m) 70112 6.30 160 87.7 SK1-13 Sloped channel - 39.37” (1m) 70113 6.50 165 88.7 SK1-14 Sloped channel - 39.37” (1m) 70114 6.69 170 89.7 SK1-15 Sloped channel - 39.37” (1m)1 70115 6.89 175 90.7 SK1-16 Sloped channel - 39.37” (1m) 70116 7.09 180 91.7 SK1-17 Sloped channel - 39.37” (1m) 70117 7.28 185 92.7 SK1-18 Sloped channel - 39.37” (1m) 70118 7.48 190 93.7 SK1-19 Sloped channel - 39.37” (1m) 70119 7.68 195 94.7 SK1-20 Sloped channel - 39.37” (1m)1 70120 7.87 200 95.7 SK1-020 Neutral channel - 39.37” (1m)1 70145 7.87 200 95.7 SK1-0203 Neutral channel - 19.69” (0.5m)1 70146 7.87 200 48.2 SK1-21 Sloped channel - 39.37” (1m) 70121 8.07 205 96.7 SK1-22 Sloped channel - 39.37” (1m) 70122 8.27 210 97.7 SK1-23 Sloped channel - 39.37” (1m) 70123 8.46 215 98.6 SK1-24 Sloped channel - 39.37” (1m) 70124 8.66 220 99.6 SK1-25 Sloped channel - 39.37” (1m)1 70125 8.86 225 100.6 SK1-26 Sloped channel - 39.37” (1m) 70126 9.06 230 101.6 SK1-27 Sloped channel - 39.37” (1m) 70127 9.25 235 102.6
Description Part No. Inches2 mm2 Weight lbs.
SK1-28 Sloped channel - 39.37” (1m) 70128 9.45 240 103.6 SK1-29 Sloped channel - 39.37” (1m) 70129 9.65 245 104.6 SK1-30 Sloped channel - 39.37” (1m)1 70130 9.84 250 105.6 SK1-030 Neutral channel - 39.37” (1m)1 70147 9.84 250 105.6 SK1-0303 Neutral channel - 19.69” (0.5m)1 70148 9.84 250 52.7 SK1-31 Sloped channel - 39.37” (1m) 70131 10.04 255 106.6 SK1-32 Sloped channel - 39.37” (1m) 70132 10.24 260 107.6 SK1-33 Sloped channel - 39.37” (1m) 70133 10.43 265 108.6 SK1-34 Sloped channel - 39.37” (1m) 70134 10.63 270 109.6 SK1-35 Sloped channel - 39.37” (1m)1 70135 10.83 275 110.6 SK1-36 Sloped channel - 39.37” (1m) 70136 11.02 280 111.6 SK1-37 Sloped channel - 39.37” (1m) 70137 11.22 285 112.6 SK1-38 Sloped channel - 39.37” (1m) 70138 11.42 290 113.6 SK1-39 Sloped channel - 39.37” (1m) 70139 11.61 295 114.6 SK1-40 Sloped channel - 39.37” (1m)1 70140 11.81 300 115.6 SK1-040 Neutral channel - 39.37” (1m)1 70149 11.81 300 115.6 SK1-0403 Neutral channel - 19.69" (0.5m)1 70150 11.81 300 57.3 SK1-901D In-line catch basin - 19.69” (0.5m)3 94613 28.23 717 100.3 SK1-621D catch basin - 19.69” (0.5m)3 94574 28.86 733 102.7 SK1-631D catch basin - 19.69” (0.5m)4 94584 40.86 1038 98.7 Series 600 optional riser 99902 - - 10.0 Foul air trap - fits both 900 & 600 basins 90854 - - 1.2 SK1-304-6 6” Inlet Cap 96861 9.84 250 6.2 SK1-308-6 6” Outlet Cap 96862 9.84 250 6.0 SK1-404-6 6” Inlet Cap 96863 11.81 300 7.2 SK1-408-6 6” Outlet Cap 96864 11.81 300 7.0 SK1-Universal end cap 96824 11.81 300 0.4 Debris strainer for 4” bottom knockout 93488 - - 0.2 4” Oval to 6” round outlet adaptor 95140 - - 1.1 4” Installation device 97477 - - 2.8 Grate removal tool 01318 - - 0.3
Notes:
1. This channel offers bottom knockout feature; 4" round/6" oval.
2. Inverts shown are male end; for female invert depth subtract 5mm (≈0.2”) from male invert (except neutral channels where it will be same as male invert).
To calculate overall channel depth add 25.4mm (≈1”) to invert depth.
3. Catch basin assembly includes polymer concrete top, PowerLok grate, trash bucket and plastic base.
4. Catch basin assembly includes polymer concrete top, PowerLok grate, deep trash bucket, plastic riser and plastic base.
5. Water intake per meter channel is 50.4 in2 (325.16 cm2)
SPEC
IN
F O
ACO, Inc.
Northeast Sales Office 9470 Pinecone Drive Mentor, OH 44060 Tel: (440) 639-7230 Toll free: (800) 543-4764 Fax: (440) 639-7235
West Sales Office 825 W. Beechcraft St.
Casa Grande, AZ 85122 Tel: (520) 421-9988 Toll Free: (888) 490-9552 Fax: (520) 421-9899
Electronic Contact:
info@ACODrain.us www.ACODrain.us
© April 2018, ACO, Inc. This information is believed to be accurate but it is not guaranteed to be so. We cannot assume liability for results that buyer obtains with our product since conditions of use are beyond the control of the company. It is the customer’s responsibility to evaluate suitability and safety of product for his own use. ACO, Inc.
reserves the right to change the product and specifications without notice.
Follow us onSoutheast Sales Office 4211 Pleasant Road Fort Mill, SC 29708 Toll free: (800) 543-4764 Fax: (803) 802-1063
April 2018
Invert
ACO DRAIN
PowerDrain - S100K iron edged channel system with longitudinal grate (ADA)
Invert
File details come from the government source that posted it. Updated .