Post Site Visit Questions and Answers 12 Sep.docx

DOCX document 16 KB Posted

Attached to
1st Helicopter Sq Camera System Upgrade
Solicitation number
FA286024Q4049
Issued by

About this file

This document contains Post Site Visit Questions and Answers related to a federal contract opportunity for a 1st Helicopter Squadron Camera System Upgrade. The key details are:

The requirement is a Service-Disabled Veteran Owned Small Business (SDVOSB) set-aside to remove an old camera system and install a new system of approximately 15 cameras of various types around Buildings 1910, 1911, and 1914. The new system must be compatible with the latest camera technology and include a base +4 maintenance service. Responses are due by the response deadline to the primary and secondary POCs. Access to a Non-nuclear (CMD) Equipment Approval memorandum dated 20231208 is required to view additional details about the camera specifications. The acquisition is being conducted by the Department of the Air Force Headquarters District Washington.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Post Site Visit Questions 1st Heli Sq Camera Upgrade

1. What is the dimension of the hanger?

· 234.58 feet by 248.16

2. There is a camera outside and inside of the SCIF. Can the inside camera be viewed from a location outside of the SCIF? Most of the time, there aren’t cameras inside SCIFs will a replacement be required, or will the existing camera be removed?

· Camera will be viewed from inside the SCIF. Camera there within will be replaced as outlined in the PWS.

3. There are cameras on top of buildings viewing the runway/landing pad. What’s the distance from those cameras to the areas they are viewing?

· 800 feet

4. For the “add-on” camera for bldg. 1911, does it have to be a 4K bullet camera, or can it be a dome or turret camera?

· 4k bullet camera shall be installed as outlined in the PWS.

5. Are we changing the existing analog cameras to digital (cat6)?

· Yes, there is a single analog camera located on bldg. 1914 that will need to be updated.

6. For all exterior cameras that require cat6 pulls are we replacing conduit?

· New installs will likely need new conduit. Replacement cameras should use existing conduits.

7. If camera lines running from exterior pole are run with the power is another underground chase being run?

· The camera lines in the light poles are in a separate conduit.

8. Have existing cat6 lines been tested on cameras that are inoperable?

· All line testing will be performed by the 744th Communications Squadron

9. Does the command center in 1910 need to view cameras in 1914 and 1911?

· The command center in 1910 shall have viewing capabilities of all cameras outlined within the PWS.

10. What is the total amount of cameras we are responsible for under this contract?

· Under this contract there is a total of 13 cameras.

File details come from the government source that posted it. Updated .