PINPOINT CONTRACT.pdf

DPS Independent Contractor Agreement, 27-03-88400-037 Revised March 2025

MISSISSIPPI DEPARTMENT OF PUBLIC SAFETY

CONTRACT FOR PROFESSIONAL SERVICES

1. Parties. This contractual agreement is entered into by and between the Mississippi Department of Public

Safety (hereinafter “DPS” or “Agency”) and PinPoint Testing, LLC (hereinafter “Contractor”).

2. Purpose. The purpose of this contract is for DPS to engage Contractor to provide certain professional services.

3. Period of Performance. The period of performance of this agreement shall commence upon signature of both parties, but not prior to August 1, 2026, and shall terminate July 31, 2027.

4. General Terms and Conditions. This contract is hereby made subject to the terms and conditions included in Attachment A, captioned “General Terms and Conditions”, attached hereto and incorporated herein.

5. Acknowledgements and Special Terms. This contract is hereby made subject to the terms and conditions included in Attachment B, captioned “Acknowledgements and Special Terms”, attached hereto and incorporated herein.

6. Scope of Services. Contractor will perform and complete in a timely and satisfactory manner the services described in Attachment C, captioned “Services and Compensation”, and Attachment D, captioned “Statement of Work”, which are attached hereto and made a part hereof by reference.

7. Consideration. As consideration for the performance of the services referenced above, DPS agrees to compensate Contractor as provided in Attachment C.

8. Notices. All notices required or permitted to be given under this agreement shall be in writing and personally delivered or sent by certified United States mail, postage prepaid, return receipt requested, to the party to whom the notice should be given at the address set forth below. Notice shall be deemed given when actually received or when refused. The parties agree to promptly notify each other in writing of any change of address.

For DPS: Sean J. Tindell, Commissioner

Mississippi Department of Public Safety Post Office Box 958 Jackson, Mississippi 39205

[with Copy to Rebecca Henley, General Counsel]

For the Contractor: Jeffery H. Moran, Ph.D., Chief Executive Officer

PinPoint Testing, LLC 13 Childrens Way, R2109 Little Rock, Arkansas 72202 Jeffery.Moran@pinpointtesting.com 501.364.6555

Any other correspondence concerning this agreement shall be directed as follows:

For DPS: Mary Dukes, MS Forensics Laboratory Director

Mississippi Department of Public Safety 215 Allen Stuart Drive Pearl, Mississippi 39208 MJDukes@mcl.ms.gov

9. Entire Agreement. This agreement, including all contract documents, represents the entire and integrated agreement between the parties hereto and supersedes all prior negotiations, representations or agreements, irrespective of whether written or oral. This agreement may be altered, amended, or modified only by a written document executed by the Mississippi Department of Public Safety and Contractor. Contractor acknowledges that it has thoroughly read all contract documents and has had the opportunity to receive competent advice and counsel necessary for it to form a full and complete understanding of all rights and obligations herein. Accordingly, this agreement shall not be construed or interpreted in favor of or against DPS or Contractor on the basis of draftsmanship or preparation hereof.

In witness whereof, the parties hereto have affixed their signatures on the date indicated below, after first being authorized so to do.

By: ________________________________________________ _________________ ______ Sean J. Tindell, Commissioner DATE

By: ________________________________________________ _________________ ______

Jeffery H. Moran, Ph.D. DATE Chief Executive Officer PinPoint Testing, LLC

ATTACHMENT A: GENERAL TERMS AND CONDITIONS

1. Applicable Law. The contract shall be governed by and construed in accordance with the laws of the State of Mississippi, excluding its conflicts of laws provisions, and any litigation with respect thereto shall be brought in the courts of Mississippi.

2. Approval. It is understood that if this contract requires approval by the Public Procurement Review Board (“PPRB”) and/or the Department of Finance and Administration Office of Personal Service Contract Review (“OPSCR”), and this contract is not approved by PPRB and/or OPSCR, it is void and no payment shall be made hereunder.

3. Attorneys’ Fees and Expenses. In the event Contractor defaults on any obligations under this Agreement, Contractor shall pay to DPS all costs and expenses, without limitation, incurred by DPS in enforcing this Agreement or reasonably related to enforcing this Agreement. This includes but is not limited to investigative fees, court costs, and attorneys’ fees. Under no circumstances shall DPS be obligated to pay attorneys’ fees or legal costs to Contractor.

4. Authority to Contract. Contractor warrants: (1) that it is a validly organized business with valid authority to enter into this agreement; (2) that it is qualified to do business and in good standing in the State of Mississippi; (3) that entry into and performance under this agreement is not restricted or prohibited by any loan, security, financing, contractual, or other agreement of any kind; and, (4) notwithstanding any other provision of this agreement to the contrary, that there are no existing legal proceedings or prospective legal proceedings, either voluntary or otherwise, which may adversely affect its ability to perform its obligations under this agreement.

5. Availability of Funds. It is expressly understood and agreed that the obligation of DPS to proceed under this agreement is conditioned upon the appropriation of funds by the Mississippi State Legislature and the receipt the appropriated funds. If the funds anticipated for the continuing time fulfillment of the agreement are, at any time, not forthcoming or insufficient, regardless of the source of funding, DPS shall have the right upon 10 business days written notice to Contractor, to terminate this agreement without damage, penalty, cost or expense to DPS of any kind whatsoever. The effective date of termination shall be as specified in the notice of termination.

6. Compliance With Equal Opportunity in Employment Policy. Contractor understands that the Mississippi

Department of Public Safety is an equal opportunity employer and therefore, maintains a policy which prohibits unlawful discrimination based on race, color, creed, sex, age, national origin, physical handicap, disability, genetic information, or any other consideration made unlawful by federal, state, or local laws. All such discrimination is unlawful, and Contractor agrees during the term of the agreement that Contractor will strictly adhere to this policy in its employment practices and provision of services.

7. Compliance With Laws. Contractor shall comply with, and all activities under this agreement shall be subject to, all applicable federal, state, and local laws and regulations, as now existing and as may be amended or modified.

8. Confidentiality. The Mississippi Department of Public Safety is a public agency of the State of Mississippi and is subject to the Mississippi Public Records Act of 1983. Mississippi Code Annotated §§ 25-61-1, et seq. If a public records request is made for any information provided to DPS by Contractor, DPS shall follow the provisions of Mississippi Code Annotated §§ 25-61-9 and 79-23-1 before disclosing such information – unless Contractor has previously indicated the information is not a trade secret or confidential commercial and financial information. The Mississippi Department of Public Safety shall not be liable to the Contractor for disclosure of information required by court order or required by law.

9. Contract Assignment and Subcontracting. Contractor acknowledges that it was selected by DPS to perform the services required hereunder based, in part, upon Contractor’s special skills and expertise. Contractor shall not assign, subcontract, or otherwise transfer this agreement, in whole or in part, without the prior written consent of DPS, which may, in its sole discretion, approve or deny without reason. Any attempted assignment or transfer of Contractor’s obligations hereunder without consent of DPS shall be null and void.

Approval of a subcontract by the Mississippi Department of Public Safety shall not be deemed to be approval of the incurrence of any additional obligation of DPS. Subcontracts shall be subject to the terms and conditions of this agreement and to any conditions of approval that DPS may deem necessary. Subject to the foregoing, this agreement shall be binding upon the respective successors and assigns of the parties.

10. Contractor Personnel. The Mississippi Department of Public Safety shall, throughout the life of the contract, have the right of reasonable rejection and approval of staff or subcontractors assigned to the work by Contractor. If DPS reasonably rejects staff or subcontractors, Contractor shall provide replacement staff or subcontractors satisfactory to DPS in a timely manner and at no additional cost to DPS. The day-to-day supervision and control of Contractor’s employees and subcontractors is the sole responsibility of Contractor.

11. Disclosure of Confidential Information Required by Law. In the event that either party to this Agreement receives notice that a third-party has served upon it a subpoena or other validly issued administrative or judicial process ordering divulgence of the other party’s data or other information, the party subject to the subpoena or other legal process shall promptly inform the other party at the earliest reasonable opportunity, unless prohibited by law from doing so. Thereafter, the party subject to the legal process shall respond to the extent mandated by law. This section shall survive the termination or completion of this agreement. The parties agree that this section is subject to and superseded by Mississippi Code Annotated §§ 25-61-1, et seq.

12. E-Payment. Contractor agrees to accept all payments in United States currency via the State of Mississippi’s electronic payment and remittance vehicle. The Agency agrees to make payment in accordance with Mississippi “Timely Payments for Purchases by Public Bodies” laws, which generally provide for payment of undisputed amounts by the Agency within 45 calendar days of receipt of invoice. Mississippi Code Annotated § 31-7-301, et seq.

13. E-Verification. If applicable, Contractor represents and warrants that it will ensure its compliance with the Mississippi Employment Protection Act and will register and participate in the status verification system for all newly hired employees. Mississippi Code Annotated §§ 71-11-1 and 71-11-3. Contractor agrees to provide a copy of each verification upon request of the Mississippi Department of Public Safety subject to approval by any agencies of the United States Government. Contractor further represents and warrants that any person assigned to perform services hereafter meets the employment eligibility requirements of all immigration laws.

The breach of this clause may subject Contractor to the following: (1) termination of this contract and exclusion pursuant to Chapter 15 of the Public Procurement Review Board Office of Personal Service Contract Review Rules and Regulations; (2) the loss of any license, permit, certification or other document granted to Contractor by an agency, department, or governmental entity for the right to do business in Mississippi; or (3) both. In the event of such termination, Contractor would also be liable for any additional costs incurred by the Agency due to Contract cancellation or loss of license or permit to do business in the state.

14. Failure to Deliver. In the event of failure of Contractor to deliver services in accordance with the contract terms and conditions, the Mississippi Department of Public Safety, after due oral or written notice, may procure the services from other sources and hold Contractor responsible for any resulting additional purchase and administrative costs. This remedy shall be in addition to any other remedies that DPS may have.

15. Failure to Enforce Does Not Constitute Waiver. Failure by the Mississippi Department of Public Safety at any time to enforce the provisions of the contract shall not be construed as a waiver of any such provisions.

Such failure to enforce shall not affect the validity of the contract or any part thereof or the right of DPS to enforce any provision at any time in accordance with its terms.

16. Force Majeure. Each party shall be temporarily excused from performance for any period and to the extent that it is prevented from performing any obligation or service, in whole or in part, as a result of causes beyond the reasonable control and without the fault or negligence of such party and/or its subcontractors. Such acts shall include without limitation acts of God, strikes, lockouts, riots, acts of war, epidemics, governmental regulations superimposed after the fact, fire, earthquakes, floods, or other natural disasters (“force majeure events”). When such a cause arises, Contractor shall notify the Agency in writing at its earliest reasonable opportunity of the cause of its inability to perform, how it affects its performance, and the anticipated duration of the inability to perform. All parties shall make reasonable efforts to minimize the impact of the force majeure event on contract performance. The Mississippi Department of Public Safety may exercise any rights it has under the contract which are available when neither party is in default.

17. Indemnification. To the fullest extent allowed by law, Contractor shall indemnify, defend, save and hold harmless, protect, and exonerate the Mississippi Department of Public Safety its commissioners, board members, officers, employees, agents, and representatives, and the State of Mississippi from and against all claims, demands, liabilities, suits, actions, damages, losses, and costs of every kind and nature whatsoever including, without limitation, court costs, investigative fees and expenses, and attorneys’ fees, arising out of or caused by Contractor and/or its partners, principals, agents, employees and/or subcontractors in the performance of or failure to perform this agreement.

18. Independent Contractor Status. Contractor shall, at all times, be regarded as and shall be legally considered an independent contractor and shall at no time act as an agent for the Mississippi Department of Public Safety. Nothing contained herein shall be deemed or construed by DPS, Contractor, or any third party as creating the relationship of principal and agent, master and servant, partners, joint ventures, employer and employee, or any similar such relationship between the Mississippi Department of Public Safety and Contractor. Neither the method of computation of fees or other charges, nor any other provision contained herein, nor any acts of DPS or Contractor hereunder creates or shall be deemed to create a relationship other than the independent relationship of DPS and Contractor.

Contractor’s personnel shall not be deemed in any way, directly or indirectly, expressly or by implication, to be employees of the Mississippi Department of Public Safety. Neither Contractor nor its employees shall, under any circumstances, be considered servants, agents, or employees of DPS, and DPS shall be at no time legally responsible for any negligence or other wrongdoing by Contractor, its servants, agents, or employees.

The Mississippi Department of Public Safety shall not withhold from the contract payments to Contractor any federal or state unemployment taxes, federal or state income taxes, Social Security tax, or any other amounts for benefits to Contractor. Further, DPS shall not provide to Contractor any insurance coverage or other benefits, including Workers’ Compensation, normally provided by DPS for its employees.

19. Insurance. Contractor represents that it will maintain workers’ compensation insurance in compliance with Mississippi law which shall inure to the benefit of all Contractor’s personnel provided hereunder and comprehensive general liability or professional liability insurance with minimum limits of One Million Dollars [$1,000,000.00] per occurrence. All general liability and professional liability insurance will provide coverage to the Mississippi Department of Public Safety as an additional insured. The Mississippi Department of Public Safety reserves the right to request from carriers, certificates of insurance regarding the required coverage. Insurance carriers shall be licensed or hold a Certificate of Authority from the Mississippi Department of Insurance.

20. Modification or Renegotiation Required by Change in Law. The parties agree to renegotiate the agreement in good faith if federal and/or state revisions to any applicable laws or regulations make changes in this agreement necessary. This agreement may be modified only by written agreement signed by the parties hereto and approval by the Public Procurement Review Board, if required.

21. No Limitation of Liability. Nothing in this agreement shall be interpreted as excluding or limiting any liability of the Contractor for harm arising out of the Contractor’s or its subcontractors’ performance under this agreement.

22. Paymode. Payments by DPS using the state’s accounting system shall be made and remittance information provided electronically as directed by the state and deposited into the bank account of Contractor’s choice.

The Mississippi Department of Public Safety may, at its sole discretion, require Contractor to electronically submit invoices and supporting documentation at any time during the term of this Agreement. Contractor understands and agrees that the Agency is exempt from the payment of Mississippi taxes. All payments shall be in United States currency.

23. Procurement Regulations. This contract shall be governed by the applicable provisions of the Public Procurement Review Board Office of Personal Service Contract Review Rules and Regulations, a copy of which is available on the Mississippi Department of Finance and Administration’s website (www.dfa.ms.gov). Any offeror responding to a solicitation for personal and professional services and any contractor doing business with a state Agency is deemed to be on notice of all requirements therein.

24. Property Rights. Property rights do not inure to Contractor until such time as services have been provided under a legally executed contract. Contractor has no legitimate claim of entitlement to the provision of work hereunder and acknowledges that DPS may terminate this contract at any time for its own convenience.

25. Record Retention and Access to Records. Contractor shall maintain such financial records and other records as may be prescribed by the Mississippi Department of Public Safety or by applicable federal and state laws, rules, and regulations. Provided Contractor is given reasonable advance written notice and such inspection is made during normal business hours of Contractor, DPS or any duly authorized representatives shall have unimpeded, prompt access to any of Contractor’s books, documents, papers, and/or records which are relevant to this agreement. All records related to this agreement shall be retained by Contractor for three years after final payment is made under this agreement and all pending matters are closed; however, if any audit, litigation or other action arising out of or related in any way to this project is commenced before the end of the three year period, the records shall be retained for one year after all issues arising out of the action are finally resolved or until the end of the three year period, whichever is later.

26. Required Public Records and Transparency. Upon execution of a contract, the provisions of the contract which contain the personal or professional services provided, the unit prices, the overall price to be paid, and the term of the contract shall not be deemed to be a trade secret or confidential commercial or financial information pursuant to Mississippi Code Annotated § 25- 61-9(7). The contract shall be posted publicly on www.transparency.ms.gov and shall be available for at the Agency for examination, inspection, or reproduction by the public. The contractor acknowledges and agrees that the Mississippi Department of Public Safety and this contract are subject to the Mississippi Public Records Act of 1983 codified at Mississippi Code Annotated §§ 25-61-1, et seq. and its exceptions, Mississippi Code Annotated § 79-23-1, and the Mississippi Accountability and Transparency Act of 2008, codified at Mississippi Code Annotated §§ 27-104-151, et seq.

27. Requirements Contract. During the period of the contract, Contractor shall provide all services described in the contract. Contractor understands and agrees that this is a requirements contract and that the Mississippi Department of Public Safety shall have no obligation to Contractor if no services are required. Any quantities that are included in the scope of work reflect the current expectations of DPS for the period of the contract. The amount is only an estimate and Contractor understands and agrees that DPS is under no obligation to Contractor to utilize any amount of the services as a result of having provided this estimate or of having any typical or measurable requirement in the past. Contractor further understands and agrees that DPS may require services in an amount less than or in excess of the estimated annual contract amount and that the quantity actually used, whether in excess of the estimate or less than the estimate, shall not give rise to any claim for compensation other than the total of the unit prices in the contract for the quantity actually used.

28. Severability. If any part of this agreement is declared to be invalid or unenforceable, such invalidity or unenforceability shall not affect any other provision of the agreement that can be given effect without the invalid or unenforceable provision, and to this end the provisions hereof are severable. In such event, the parties shall amend the agreement as necessary to reflect the original intent of the parties and to bring any invalid or unenforceable provisions in compliance with applicable law.

29. Stop Work Order. The Mississippi Department of Public Safety may, by written order to Contractor at any time, require Contractor to stop all or any part of the work called for by this contract. This order shall be for a period of time specified by the Mississippi Department of Public Safety. Upon receipt of such an order, Contractor shall forthwith comply with its terms and take all reasonable steps to minimize any further cost to DPS. Upon expiration of the stop work order, Contractor shall resume providing the services which were subject to the stop work order, unless DPS has terminated that part of the agreement or terminated the agreement in its entirety. The Mississippi Department of Public Safety is not liable for payment for services which were not rendered due to the stop work order.

30. Termination.

Termination for Convenience. The Mississippi Department of Public Safety may, when the interests of the Agency so require, terminate this contract in whole or in part, for the convenience of the Agency. DPS shall give written notice of the termination to Contractor specifying the part of the contract terminated and when termination becomes effective. Contractor shall incur no further obligations in connection with the terminated work and on the date set in the notice of termination Contractor will stop work to the extent specified. Contractor shall complete the work not terminated by the notice of termination and may incur obligations as are necessary to do so.

Termination for Default. If the Mississippi Department of Public Safety gives the Contractor a notice that the personal or professional services are being provided in a manner that is deficient, the Contractor shall have 30 days to cure the deficiency. If the Contractor fails to cure the deficiency, DPS may terminate the contract for default and the Contractor will be liable for the additional cost to DPS to procure the personal and professional services from another source. Termination under this paragraph could result in Contractor being excluded from future contract awards pursuant to Chapter 15 of the Public Procurement Review Board

Office of Personal Service Contract Review Rules and Regulations. Any termination wrongly labelled termination for default shall be deemed a termination for convenience.

31. Third Party Notification. Contractor shall give DPS prompt notice in writing of any action or suit filed, and prompt notice of any claim made against Contractor by any entity that may result in litigation related in any way to this agreement.

[The remainder of this page has been intentionally left blank.]

ATTACHMENT B: ACKNOWLEDGEMENTS AND SPECIAL TERMS

The following acknowledgements and conditions shall be made a part of this agreement:

CONFLICT OF INTEREST. To the best of his or her knowledge, Contractor certifies that no DPS employee, or spouse, parent or child of an DPS employee, serves as a member of its governing body, project staff or has an ownership or pecuniary interest in the Contractor. Contractor agrees that should this condition change during the period of this contract, Contractor shall notify DPS within 30 days. Notification should be sent by certified mail to the following:

Attention: DPS Legal Department Post Office Box 958 Jackson, Mississippi 39205

Furthermore, Contractor represents, to the best of his or her knowledge and belief, that this contract does not present the Contractor with a conflict of interest with respect to any past, current, or potential contract or employment such that the Contractor would be unable to perform impartially and without bias.

EXCLUSION OR DEBARMENT.

By submitting a bid or proposal in response to the procurement, the Contractor certifies that it is not currently excluded or debarred from future contract awards by any political subdivision or agency of any state, federal, local, or county government. Contractor further certifies that it is not an agent of any such person or entity.

Contractor certifies that it has not, in the five-year period preceding its offer, been convicted of or had a civil judgment rendered against it for commission of a fraud or criminal offense in connection with obtaining, attempting to obtain, or performance of a public contract; violation of antitrust laws; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, or receiving stolen property. Contractor certifies that it is not presently indicted or otherwise criminally or civilly charged with the commission of any of the acts listed herein.

Contractor certifies that, within the past five years, it has not had a contract with a governmental entity terminated due to the Contractor’s failure to perform, default, or any other action or inaction by the Contractor.

REPRESENTATION REGARDING GRATUITIES. Contractor represents that it has not, is not, and will not offer, give, or agree to give any employee or former employee of the Mississippi Department of Public Safety a gratuity or offer of employment in connection with any approval, disapproval, recommendation, development, or any other action or decision related to the solicitation and resulting contract. Contractor further represents that no employee or former employee of DPS has or is soliciting, demanding, accepting, or agreeing to accept a gratuity or offer of employment for the reasons previously stated; any such action by an employee or former employee in the future, if any, will be rejected by contractor. Contractor further represents that it is in compliance with the Mississippi Ethics in Government laws, codified at Mississippi Code Annotated §§ 25-4-101 through 25-4-121, and has not solicited any employee or former employee to act in violation of said law.

CONTRACTOR’S REPRESENTATION REGARDING CONTINGENT FEES. By executing the contract, the Contractor represents that it has not retained any person or agency on a percentage, commission, or other contingent arrangement to secure this contract. If the Contractor cannot make such a representation, a full and complete explanation shall be submitted in writing to the Agency prior to contract execution.

ATTACHMENT C: SERVICES AND COMPENSATION

SCOPE OF SERVICES

In fulfillment of the purposes of this Agreement, the Contractor shall provide DPS with the professional services detailed below and further described in Attachment D. Services shall include, but are not limited to, the following:

Contractor shall provide consulting services for the implementation and validation of a LCMS/MS confirmation method(s) for the measurement of drugs of abuse in blood samples for the investigation of DUID cases. The method(s) must meet the rigorous analytical requirements defined by ASS/ANSI Standard 036 and requirements established by DPS Mississippi Forensics Laboratory (MFL). Contractor will support both remote and onsite activities to assist in the research and development, optimization, and validation of MFL's targets of interest on two (2) Agilent 6475 systems.

COMPENSATION

In furtherance of the performance of the services referenced above, DPS agrees to compensate the Contractor the estimated amount of $79,260.00. Rates and purchases under this Agreement shall be subject to any limitations contained in Attachment D. Contractor agrees to ensure the funds subject to this Agreement are used in accordance with any applicable conditions, requirements and restrictions of federal, state and local laws.

The Contractor shall invoice DPS monthly as needed. The final invoice to DPS shall be sent within thirty (30) days after the Agreement ending date. The invoice should have appropriate documentation substantiating actual expenses. DPS will pay all invoices within forty-five (45) days following the approval of the same. All invoices should be submitted to the following:

Tracey Herron, MFL Procurement

215 Allen Stuart Drive Pearl, Mississippi 39208 THerron@mcl.ms.gov

It is expressly understood and agreed that, while the amount noted above is based on an estimated budget and may be subject to change, in no event will the total compensation to be paid hereunder exceed the specified amount of $79,260.00.

ATTACHMENT D: STATEMENT OF WORK

Contractor’s services shall be in accordance with the quote below and the attached documentation submitted to DPS as a statement of work [17 total pages]. A reasonable allowance for contingencies shall be included for market conditions at the time of the written quote and for unanticipated changes required in the work of this project.

June 2, 2026

PinPoint Testing Statement of Work

The purpose of this document is to capture client needs, summarize the scope of the project, deliverables, and align expectations between client and consultant.

Date: June 2, 2026

Created by: Jason Truskowski

Created for: David Lockley

Client Information

Mississippi Forensics Laboratory

David Lockley

215 Allen Stuart Drive

Pearl, MS 39208

Client Point(s) of Contact

Name Position Email Address Phone Number Primary Contact Y/N

David Lockley Section Chief - Toxicology at Mississippi Forensic Laboratory dlockley@mcl.ms.gov 601-420-9000 Y

Consultants Point(s) of Contact

Name Position Role Email Address Phone Number

Ben Witten Director of Consulting

Lead Consultant Benjamin.witten@pinpointtesting.com (800) 657-1043

Ben Sollins Senior Consultant Support Benjamin.sollins@pinpointtesting.com

Dr. Jeffery Moran C.E.O. Technical Support Jeffery.moran@pinpointtesting.com

Attachment D [Page 1 of 17]

Project Overview

The Mississippi Forensic Laboratory (MFL) has engaged PinPoint Testing to provide consulting services for the implementation and validation of a LC-MS/MS confirmation method(s) for the measurement of drugs of abuse in blood samples for the investigation of DUID cases. The method(s) must meet the rigorous analytical requirements defined by ASB/ANSI Standard 036 and requirements established by the MFL laboratory. PinPoint Testing’s consulting team will support both remote and onsite activities to assist in the research and development, optimization, and validation of MFL’s targets of interest on 2 x Agilent

6475 systems.

Tasks

Task 1: Discovery & Consultation

Summary – Consultants will meet virtually or in person with client personnel to review instrumentation, software, and reagent inventories. A comprehensive project plan and validation roadmap will be developed, including a calendar of milestones, resource requirements, and reporting protocols.

Consultant Deliverables

• Assignment of project manager and lead consultant

• Draft and delivery of Project Plan with detailed timeline and milestones

• Review and finalization of client’s analytical and performance requirement

• Delivery of software compatibility requirements and remote access configuration

• Finalized materials list specifying minimum instrument and reagent requirements

(See Exhibit A)

• Instrument performance verification via Preventive Maintenance (PM) report review and sign-off

• Delivery of documentation templates

• Finalization and delivery of signed Statement of Work

Deliverables from Client

• Grant remote access to instrument

• Review and approve Project Plan [See Exhibit B]

• Review and approve Validation Plan [See Exhibit B]

• Review and approval of documentation formats & drafts

• Review and approve validation report specifications [ See Exhibit C]

• Sign off on SOW

Estimated Timeline – 7 days

Attachment D [Page 2 of 17]

Task 2: Method R&D and Reagent Production

Summary – PinPoint Testing will conduct method development at the PinPoint Applications

Research Center (PARC), an ISO/IEC 17025 accredited and CLIA-certified laboratory. Client's method—covering sample preparation, extraction, and analytical conditions—will be evaluated and optimized using the Bruker EVOQ-DART-TQ+ [VIP-HESI] LC-MS/MS platform.

Consultant deliverables

• Method optimization studies:

o Sample preparation & drug extraction o Mass calibration o MS Parameters (tuning) o Precursor & Product Ion selection o Chromatographic conditions

• Draft SOP for sample workflow, analysis, & reporting

• Design, Document, & Build reagent package

• Delivery of validation reagent package (per Exhibit A) See Required Materials

Deliverables from Client

• Review and formal approval of optimized sample preparation protocol and method parameters

• Receipt and verification of reagent materials

Estimated Timeline – 14-21 days

Task 3 & Task 4: Suitability Assessment & Instrument Optimization – Two (2) Instruments

Summary – Lead consultant will conduct onsite activities to facilitate the transfer of client’s optimized method and evaluate instrument readiness. Consultants will collaborate with client’s laboratory to verify instrument performance and install ancillary components as needed to set up workflow. Instrumentation will be tuned to meet the analytical specifications defined in the client’s method.

Consultant deliverables

• Complete Optimization Studies onsite:

o Mass Calibration o MS Parameters o Precursor & Product ions verification o Chromatographic conditions

Client Deliverables

• Approval of Optimization Studies

Estimated Timeline – 4-7 days

Attachment D [Page 3 of 17]

Task 5 and Task 6: Method Validation – Two (2) Instruments

Summary – Lead consultant will conduct onsite validation of the client's method, in accordance with the predefined scope and specifications outlined in Exhibit B. Validation will include comprehensive performance evaluation and documentation in accordance with ISO/IEC 17025 guidelines.

Consultant Deliverables

• Method performance studies:

- Limit of Detection (LOD)

- Sensitivity & Specificity

- Dilution

- Ion suppression

- Inter-day / Intra-day accuracy & precision studies

- Extraction and stability studies.

- Matrix Effect analysis,

- Calibration Accuracy / Analytical Measurement Range (AMR),

- Interference Study

• Custom design of ToxBox® Analytical Plate tailored to method requirements and sample volume forecasts

• Compilation and delivery of Final Validation Report

• Sign off on reports

Estimated Timeline – 14-21 days

Attachment D [Page 4 of 17]

Task 6: Documentation, Reporting, & Training

Summary – Consultants will support the WPHL team in generating documentation required for

ISO/IEC 17025 compliance and provide staff training on validated workflows, quality documentation, and regulatory expectations.

Deliverables

• Draft ISO 17025 Standard Operating Procedure

• Draft ISO 17025 Daily Run Checklist for each panel

• Draft ISO 17025 Compliant Validation Data Table Template

• Draft ISO 17025 Compliant Validation Report Template

• Two (2) days of onsite staff training covering workflow implementation, data interpretation, and reporting.

• Issuance of training completion certificates to participating personnel

• Production supplies delivered

• Formal sign-off on all documentation and training completion

Estimated Timeline** – 2-5 days

Attachment D [Page 5 of 17]

Pricing Table

Task† Description List Price* Discounted Price

Task 1 Discovery & Consultation $ 1,500.00 $ 0.00

Task 2 Method Research & Development $ 16,000.00 $ 0.00

Validation Reagent Pack $ 39,479.00 $ 33,500.00

Task 3 Suitability & Optimization – Instrument 1 $ 4,800.00 $ 4,800.00

Task 4 Suitability & Optimization – Instrument 2 $ 4,800.00 $ 4,320.00

Task 5 Method Validation – Instrument 1 $ 16,000.00 $ 16,000.00

Task 6 Method Validation – Instrument 2 $ 16,000.00 $ 14,400.00

Task 7 Data Processing & Reporting – Instrument 1 $ 1,600.00 $ 1,600.00

Task 8 Data Processing & Reporting – Instrument 2 $ 1,600.00 $ 1,440.00

Task 9 Laboratory Training & Documentation $ 3,200.00 $ 3,200.00

Total $79,260.00

†Client will be invoiced at the time task is complete and signed off by client & consultant.

*All fees cover consultant travel and reference materials provided by consultant to complete task.

**Estimated timelines are based on best-case scenario. Timelines can be affected by instrument performance, laboratory & staff availability, and unforeseen delays. Timelines do not imply laboratory will be in production upon completion. Internal training, documentation & quality assurance procedures may require additional time before laboratory is operational.

Fees & Charges

Total: - $79,260.00 See official quote and/or contract for fee schedule and details. All consultant travel and time is included.

Attachment D [Page 6 of 17]

Change Fees Services provided that fall outside of this scope of work will be subject to a $200.00 per hour fee. No fees will be incurred without the prior written approval of client.

Payment Terms Client will be invoiced at the completion of each task with NET 30 terms. Special terms can be accommodated but must be communicated prior to initiation of project.

Signatures By signing this Statement of Work each party agrees to the work detailed above. Work on task 1 will commence upon receipt of signed Statement of Work.

Pinpoint Testing MISsissippi Forensics Laboratory

Title: Director of Consulting Title:

Name: Benjamin Witten Name:

Signature: Signature:

Attachment D [Page 7 of 17]

Exhibit A

Required Materials Materials Provided by Consultant

Item Number Item Name / Supplier Qty

PPT-90012-1ea Phenomenex - Kinetex® 2.6 µm Phenyl-Hexyl 100 Å, LC Column 50 x 4.6 mm [00B-4495-E0]

PPT-90015-1ea Phenomenex - KrudKatcher ULTRA HPLC In-Line Filter, 2.0µm Depth Filter x 0.004in ID, 3/Pk [AF0-8497]

PPT-90020-1 ea Waters - CORTECS C18 Column, 90Å, 1.6 µm, 2.1 mm X 150 mm, 1/pk [186007096]

PPT-90021-1 ea Waters - CORTECS C18 VanGuard Pre-column, 90Å, 1.6 µm, 2.1 mm X 5 mm (3/pck, EACH)

PPT-90045-1 ea Mercedes Scientific® 2mL, Screw Top Vial, Amber Glass, 12 x 32mm, 9-425 Screw Thread, Flat Base, Wide Opening, Label (100/Pack) - [MER 2ML9V1004]

PPT-90049-1ea Fisherbrand™ 9 mm Autosampler Vial Screw Thread Open Top Caps with Septa, 6 mm Hole (Blue Cap) - 100 count

PPT-90043-1 ea Thermo Scientific™ Nalgene™ Disposable Polypropylene Robotic Reservoirs - Large Reservoirs - 300 mL [Fisher 120001300] - 40ct

PPT-90044-1 ea Biotix™ Disposable Manual 25mL Reagent Reservoirs (50 pk) - [Fisher - 12-111-089] - 50 ct

PPT-90034-1 ea Foil Heat Seal - 4titude - [Thomas Sci - 1149T12] - 100 pk

PPT-90050-1 ea Globe Scientific Transport Tube 5mL Conical PP Screw Cap - [Mercedes Scientific - GLO6101] - 1000 ct

PPT-90003-1 ea Olympus Plastics 23-150R, 200ul Olympus Premium Pipet Tips Low Binding, Racked, 10 Racks of 96 Tips / Unit [Genessee 12-150R]

PPT-60009-1ea Olympus Plastics 24-165R, 1250µl/1000µl Reach Olympus Ergonomic Pipet Tips Racked, 8 Racks of 96 Tips/Unit

PPT-60011-ASB-036 ToxBox® - Validation Study Interferrence Plates 1 PPT-60008-MIS-109/110 ToxBox® - Optimization Solution Set 1 PPT-60003- MIS-109/110 ToxBox® - Optimization Plate - Parent Drugs 1 PPT-60004- MIS-109/110 ToxBox® - Optimization Plate - Internal Standards 1 PPT-10041 – MIS-109 ToxBox® – ChromPerform Check Mix - Custom

Preparation

PPT-10049-MIS-109 ToxBox® - Blood - MethodTrax - Custom Mix 1 PPT-60001-MIS-109 ToxBox® Custom Validation Plate D 4

Attachment D [Page 8 of 17]

PPT-60010-MIS-109 ToxBox® - Validation Supplemental Supplies - D Plate Studies

PPT-60000 – MIS-109 ToxBox® Custom Validation Plate A 8 PPT-10000-MIS-109 ToxBox® - Custom Analytical Plate 4 PPT-60001-MIS-110 ToxBox® Custom Validation Plate D - Cannabinoid 4 PPT-60010-MIS-110 ToxBox® - Validation Supplemental Supplies - D Plate

Studies -Cannabinoid

PPT-60000-MIS-110 ToxBox® Custom Validation Plate A – Cannabinoid 8 PPT-10000-MIS-110 ToxBox® - Custom Analytical Plate - Cannabinoid 4

PPT-60011-ASB-036-

48well

ToxBox® - Validation Study Interferrence Plates – High Volume

PPT-20032-1ea Mobile Phase Concentrates - Multi-Drug Formulation

[PPT-3001]

PPT-20033-1ea Mobile Phase Concentrates - Cannabinoid/Barbiturate Formulation [PPT-3003]

PPT-70023-1ea Phenomenex- Supported Liquid Extraction - DE Plate - 96 well

PPT-70016-1ea Biotage - 1 mL Supported Liquid Extraction (SLE) - 48 well

PPT-90023-1ea Blank Plate - 96 well 12 PPT-90024-1ea Blank 48 Well Plate 12 PPT-70004-1ea Multi-Drug Extraction Kit - Blood (SLE) (EXT-201) 12 PPT-70008-1ea Cannabinoids & Barbiturates Extraction Kit - Blood

(SLE) (EXT-202)

PPT-70020-1L Blood Sheep - mL 1 PPT-70030-200mL Blood - Human -mL 1 PPT-70021-200mL Blood - Bovine -mL 1

Materials Provided by Client†

Item Purpose/Notes

1 x Multi-Channel Pipette Liquid transfers required for sample extractions in 96 well plates (50-1000uL)

1 x Single Channel Pipette Small volume transfer, required for optimizations, development and validation studies. (10-100uL)

HPLC Grade Methanol Organic Mobile Phase preparation (e.g. Mobile Phase B)

HPLC Grade Acetonitrile Organic Mobile Phase preparation (e.g. Mobile Phase B)

Ultra-Pure (HPLC) Grade Water Aqueous Mobile Phase preparation (e.g. Mobile Phase A)

2-Propanol (IPA) (4 L bottle) Needle Wash and LC flush

Autosampler w/ 48 & 96 well rack LC rack compatible with 48 & 96-DWP

High Pressure Liquid Chromatography Equipment Drug Separation

QQQ-Mass Spectrometer High throughput analysis

Attachment D [Page 9 of 17]

Incubator/Shaker & Autosampler Extraction / Hydrolysis

Iron / Heated foil sealer Extraction

Plate Evaporator/SPE Dry – 96 deep well plate - Single

Extraction

Positive Pressure Manifold – 96 deep well plate Extraction

†Pinpoint Testing can source client materials at the request of the client. Sourced products will be invoiced separately.

Exhibit B

Project Schedule & Plan

Working Days

Project Task Personnel Metric for completion

See Task 1

Discovery & Consultation

Consultant

Review of SOW with client and sign off on deliverables for Task 1

Inventory supplies and materials

Complete TASK 1

See Task 2 Method R&D Consultant &

PARC

Client Sign off on Task 2 Consultant materials finalized

Complete Task 2

Onsite:

Days 1-3

See Task 3

Consultant materials delivered to client laboratory

Consultant

No instrument issues detected & Client Sign off on Task 3

Prepare instrument and create acquisition method

Optimize all targets and Internal Standards

INVOICE Task 3

Days 4-6

See Task 4

Consultant materials delivered to client laboratory

No instrument issues detected & Client Sign off on Task 4

Prepare instrument and create acquisition method

Optimize all targets and Internal Standards

INVOICE Task 4

Attachment D [Page 10 of 17]

Days 7-10

Extract A-plate to evaluate sensitivity, saturation, carryover, ion ratios, and accuracy

Consultant / Data Analyst

Verify method performance Acquire data for Run 1 of A-plate study

Communicate initial method performance with data team

Day 11 Review data from Run 1 and finalize method settings

Consultant A-plate studies are acceptable Acquire data for Run 2 of A-plate study

Day 12 Review and upload data from initial runs for data analysis

Consultant A-plate studies are acceptable Acquire data for Run 3 of A-plate study

Day 13 Review and upload data from initial runs for data analysis

Consultant D-plate studies are acceptable Extract and acquire data for D-plate study

Day 14

Review and upload data from D-plate study for data team

Consultant / Data Analyst

D-plate studies are acceptable

Communicate with data analysis team to discuss progress

Extract and acquire data for Run 4 of A-plate study

Day 15 Review and upload data from initial runs for data analysis

Consultant A-plate studies are acceptable Acquire data for Run 5 of A-plate study

Day 16 Review and upload data from initial runs for data analysis

Consultant A-plate studies are acceptable Acquire data for Stability Study

Days 17-21 Review all data and finalize processing method settings Consultant / Data Analyst

All studies are acceptable, and processing methods established

INVOICE Task 5

Onsite:

Days 22-25

Extract A-plate to evaluate sensitivity, saturation, carryover, ion ratios, and accuracy

Consultant / Data Analyst

Verify method performance

Acquire data for Run 1 of A-plate study

Communicate initial method performance with data team

Day 26 Review data from Run 1 and finalize method settings

Consultant A-plate studies are acceptable Acquire data for Run 2 of A-plate study

Day 27 Review and upload data from initial runs for data analysis

Consultant A-plate studies are acceptable Acquire data for Run 3 of A-plate study

Day 28 Review and upload data from initial runs for data analysis

Consultant D-plate studies are acceptable Extract and acquire data for D-plate study

Day 29

Review and upload data from D-plate study for data team

Consultant / Data Analyst

D-plate studies are acceptable

Communicate with data analysis team to discuss progress

Extract and acquire data for Run 4 of A-plate study

Attachment D [Page 11 of 17]

Day 30 Review and upload data from initial runs for data analysis

A-plate studies are acceptable Acquire data for Run 5 of A-plate study

Day 31 Review and upload data from initial runs for data analysis Consultant

A-plate studies are acceptable Acquire data for Stability Study

Days 32-36 Review all data and finalize processing method settings Consultant / Data Analyst

All studies are acceptable, and processing methods established

INVOICE Task 6

Remote Days 37-39

Data processing and Final validation report generation Data Team

Report meets specifications in Exhibit C. & Client Sign off

INVOICE Task 7

Remote Days 40-42

Data processing and Final validation report generation Data Team

Report meets specifications in Exhibit C. & Client Sign off

INVOICE Task 8

Remote Days 43-45

Draft documents delivered Consultant Client Sign off

Client training Consultant Client Sign off

Production supplies delivered Consultant Client Sign off

INVOICE Task 9

30 days post Completion

Post Validation Check-In Consultant

Notes A-plate: Includes Accuracy, Precision and Stability studies. Each plate contains 3 runs.

Notes

D-plate: Includes Sensitivity, Linearity, Matrix comparison, Dilution, and ISE.

Working days are based on an estimate and may be extended due to circumstances outside the control of Consultants or Clients.

Attachment D [Page 12 of 17]

Exhibit C

Validation Report Specifications

(Validation Plan): Bias and Precision

Analysis of Validation Controls

Specification: At least three validation control levels will be monitored at a low, medium, and high concentration relative to the lower and upper limits of quantitation.

• Data will represent at least three runs.

• There will be at least three replicates of each validation control at each validation control level in each run.

• Average Bias should be less than 20%.

• Average Between-Run Coefficient of Variation (BRCV) should be less than 20%.

• Average Within-Run Coefficient of Variation (WRCV) should be less than 20%.

• Validation controls that are not within quantitation limits are not evaluated for acceptability.

(Validation Plan): Calibration Model

(Quadratic, 1/X Weighted)

• Specification: A calibration model is selected during method development. Residuals for the standards will be calculated and should form a random distribution about the calibration curve.

• The coefficient of determination (R2) should be greater than 0.99.

• Standards should have an average bias measurement less than 20%.

• Standards should have an average coefficient of variation measurement less than 20%.

(Validation Plan): Sensitivity

Run to Run Robustness and Matrix Effects at [LOD Conc.] ng/mL

• Specification: Sensitivity is analyzed at the lowest calibrator level established in the calibration model.

• Samples included in this analysis represents at least three different matrices and three different runs.

• Each matrix has at least three replicates. Matrices may be pooled. The average bias measurement should be less than 20%.

Attachment D [Page 13 of 17]

• The coefficient of variation should be less than 20%. The average ion ratio deviation should be less than 20%.

• The pass percentage for each signal to noise transition should be greater than 80%.

(Validation Plan): Specificity and Selectivity

• Specification: Specificity and selectivity are measured by analyzing the chromatographic performance of the…