Pilot Locker Requirements-Specs - PDF.pdf
PDF 361 KB Posted
- Attached to
- 9 OSS Pilot Lockers
- Solicitation number
- FA468626QC006
About this file
This document is a Pilot Locker Requirements/Specifications for Aircrew Flight Equipment (AFE) storage. The government requires 82 lockers total, consisting of 64 single-tier units (20 units of 3-wide configuration with 60 total lockers at 54"x18"x72" and 4 units of 1-wide configuration with 4 total lockers at 18"x18"x72") and 18 double-tier units (2 units of 3-wide configuration with 12 total lockers at 54"x18"x72" and 3 units of 1-wide configuration with 6 total lockers at 18"x18"x72"). The lockers must be constructed from industrial-grade wood with premier high-pressure laminate that is stain and scratch resistant, featuring European soft-close hinges with matching edge banding and padlock hasps. No self-locking or electronic locks are required; lockers must remain unlocked for AFE technician access.
Each locker configuration requires specific interior features: Shelf 1 (approximately 18"x18"x18" for helmet storage), Shelf 2 (approximately 18"x18"x8" for personal belongings), and a hanging bar or metal pole (2" diameter, 3-4 inches below the second shelf with no sharp edges) plus two metal hooks (positioned 8-12 inches from the top on left and right sides for hanging helmet bags, flight jackets, and CSU-13b/p anti-G garments). Acceptable colors are Carbon Mesh Black (preferred) or Silver Teakwood (optional). The room layout is 276"x224" with approximately 38 inches spacing between lockers. The specification notes require 4 corner spacers for left wall corner lockers and 11 additional 18"x18"x72" lockers for room completion if not pre-installed. The specification references eight technical orders from the U.S. Air Force relating to aircrew flight equipment and personnel restraint systems.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Pilot Locker Requirements/Specs:
QTY Needed: 82 Lockers Total
- x64 - Single-Tier lockers o x20 Units - Single-Tier, 3-wide (60-lockers total) - 54”x18”x72”. [Figure 1-2] o x4 Units - Single-Tier, 1-wide (4-lockers total) – 18”x18”x72”. [Figure 1-3]
- X18 – Double Tier Lockers o X2 Units – Double-Tier, 3-Wide (12-lockers total) – 54”x18”x72”. [Figure 2-1] o X3 Units – Double-Tier, 1-Wide (6-lockers total) – 18”x18”x72”. [Figure 2-2] Material:
- Industrial Grade wood, covered with premier high-pressure laminate that is stain and scratch resistant with a durable interior finish.
- Locker doors must include European soft close hinges and matching edge banding
- Must have padlock hasps. No self-locking or electronic locks needed. (Lockers must stay unlocked for Aircrew Flight Equipment (AFE) technicians to access.
Color:
- Acceptable Colors:
o Carbon Mesh Black (Preferred) o Silver Teakwood (Optional)
References:
(1) AFMAN 11-301, AIRCREW FLIGHT EQUIPMENT (AFE), 22SEP2025
(2) T.O. 13A1-1-1, OPERATION AND MAINTENANCE INSTRUCTIONS - AIRCRAFT
SAFETY BELTS, SHOULDER/TORSO HARNESSES, AND PERSONNEL RESTRAINT
EQUIPMENT, 21APR2026.
(3) T.O. 14-1-1, U.S. AIR FORCE AIRCREW FLIGHT EQUIPMENT CLOTHING AND
EQUIPMENT, 23DEC2025.
(4) T.O. 14P3-1-161, OPR AND MAINT INSTR WITH IPB -- COMBINED ADVANCED
TECHNOLOGY, ENHANCED DESIGN G ENSEMBLE (COMBAT EDGE
EQUIPMENT), MASK ASSEMBLY, OXYGEN, 15JAN2026.
(5) T.O. 14P3-4-151, OPERATION AND MAINTENANCE INSTRUCTIONS WITH
ILLUSTRATED PARTS BREAKDOWN -- HGU-55/P FLYERS LIGHTWEIGHT
HELMET, 27FEB2026.
(6) T.O. 14P3-6-121, USE, OPERATION AND MAINTENANCE MANUAL -- ANTI-G
CUTAWAY GARMENT TYPE CSU-13B/P, 23JAN2026.
(7) T.O. 14S-1-102-31, MAINTENANCE INSTRUCTIONS WITH IPB -- USAF FLOTATION
EQUIPMENT LOW PROFILE FLOTATION COLLAR LPU-38, 38P, 12DEC2024.
(8) T.O. 15X5-4-101, OPERATION, MAINTENANCE AND INSPECTION
INSTRUCTIONS-- OXYGEN MASK TO REGULATOR CONNECTOR
ASSEMBLIES, 18OCT2025.
Figure 1-2; Single-Tier, 3-Wide Locker
Note: (Requirements) Shelf 1:
- Needs to have approx. 18x18x18" of storage space. This will space to hold the helmet Shelf 2:
- Needs to be approx. 18x18x8", for personal belongings.
Bottom Shelf:
- 1st requirement: Requires a hanging bar approx. 3-4 inches below the bottom of the 2nd shelf. (Similar to a metal shower curtain rod)
- [alternate method] a metal pole, centered to the middle of the locker approx. 3-4 in below the bottom of the top shelf. This pole should be approx. 2" in diameter, with no sharp edges, sticking from the back of the locker to approx. 1" from the door.
- 2nd requirement: 2 metal hooks are required to be evenly installed approx. 8-12" from the top on the left and right side of the wall locker to hang (1) Helmet bag/Flight Jackets
(2) CSU-13b/p Anti-G Garment, G-Suit.
Figure 1-3; Single-Tier, 1-Wide Locker
- Same Specifications as the Single-Tier, 3-wide Locker, except for it being a Single-Tier, 1-Wide Locker.
Figure 2-1; Double-Tier, 3-Wide Locker
Top Locker:
- 1st requirement: Requires a hanging bar approx. 3-4 inches below the bottom of the 2nd shelf. (Similar to a metal shower curtain rod)
- [alternate method] a metal pole, centered to the middle of the locker approx. 3-4 in below the bottom of the top shelf. This pole should be approx. 2" in diameter, with no sharp edges, sticking from the back of the locker to approx. 1" from the door.
- 2nd requirement: 2 metal hooks are required to be evenly installed approx. 8-12" from the top on the left and right side of the wall locker to hang (1) Helmet bag/Flight Jackets
(2) CSU-13b/p Anti-G Garment, G-Suit.
Shelf 2:
- Needs to be approx. 18x18x8", for personal belongings.
Bottom Locker:
- Needs to be approx. 18x18x8", for personal belongings.
Shelf 2:
- - 1st requirement: Requires a hanging bar approx. 3-4 inches below the bottom of the 2nd shelf. (Similar to a metal shower curtain rod)
- - [alternate method] a metal pole, centered to the middle of the locker approx. 3-4 in below the bottom of the top shelf. This pole should be approx. 2" in diameter, with no sharp edges, sticking from the back of the locker to approx. 1" from the door.
- - 2nd requirement: 2 metal hooks are required to be evenly installed approx. 8-12" from the top on the left and right side of the wall locker to hang (1) Helmet bag/Flight Jackets
(2) CSU-13b/p Anti-G Garment, G-Suit.
Figure 2-2; Double-Tier, 1-Wide Locker
Note: Same specifications as the Single-Tier, 3-Wide Lockers
- Same specifications as the Single-Tier, 3-Wide Lockers
Room Layout:
Room Specifications:
- Room: 276”x224”
- Lockers are measured at 54”x18”x72” or 18”x18”x72”
- Spacing between the lockers is approx. 38”
- Thickness of the wall is an estimate and does not apply to the room measurements.
Note: (Requirements)
- 4 Corner Spacers will be required for the two corner lockers located on the left wall.
- 11 lockers will require 18x18x72 to finish (if they do not come installed).
| Pilot Locker Requirements/Specs: |
| Top Locker: |
| Bottom Locker: |
File details come from the government source that posted it. Updated .