PID PACKAGING AND MARKINGS.pdf

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM

DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:004972242

ACTUATOR, SWITCH, MAGNETIC

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS147

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

REFERENCE NUMBER:CS072

_______________EXCEPTION DATA___________________

USE MMM‐A‐132 IN LIEU OF DRAWING 5388627.

PARTS LIST DOES NOT APPLY.

______________END OF EXCEPTIONS_________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

PRODUCT INSPECTION WILL BE CONDUCTED BY THE QAR

AT THE ACTUAL MANUFACTURER'S FACILITY IDENTIFIED

ON THIS CONTRACT. THE IDENTIFICATION OF THE

ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE

CONTRACTING OFFICER FOR INCLUSION IN THE AWARD.

UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE

APPROVED BY THE PCO VIA FORMAL CONTRACT

MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST

BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN

THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED

DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 10001 2626300

REVISION NR H DTD 04/28/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 10001 2626300‐771‐571

REVISION NR G DTD 02/22/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 10001 1528243

REVISION NR J DTD 04/03/1979

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 10001 2531726

REVISION NR H DTD 09/06/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 10001 2626300

REVISION NR B DTD 01/29/1979

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 10001 2626302

REVISION NR E DTD 05/28/1986

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 5388627

REVISION NR A DTD 06/12/1996

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:32 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C

UNIT CONT:D3 OPI:O

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:00 ‐00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

NSN:010318479

RING<(>,<)> WIPER

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ZDP01

REFERENCE NUMBER:CS147

REFERENCE NUMBER:RD002

REFERENCE NUMBER:IS001

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CS200

IAW BASIC DRAWING NR 10001 2064216

REVISION NR L DTD 12/31/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 10001 2509019

REVISION NR M DTD 12/31/2013

PART PIECE NUMBER:

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:JB CUSH/DUNN THKNESS:A

UNIT CONT:BE OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:20 ‐20 Do not bend

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST

REFERENCE NUMBER:ZDP01 OBJECT TEXT ID ST

NSN:010897804

COVER, ACCESS

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RD005

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:CRE01

‐QAR:12524236

‐QAR:12524235

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RQ001

‐Tailored by excluding paragraph(s) 8.3

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZDL03

REFERENCE NUMBER:CQAID

REFERENCE NUMBER:IS001

TECHNICAL DATA ADDITIONS/CHANGES: DRAWING 12524235 ZONE B‐3 ADD ‐4

RIVET‐ MS24662‐24 SEE NOTE 5 ADD NOTE 5: USE ALTERNATIVE RIVET

MS24662‐24 IF THE MEASURED THICKNESS OF THE ITEMS TO BE RIVETED WITH THE

EXTRUSION COMPRESSED IS OVER 9.13 MM (0.359 INCHES).

PART LIST PL12524235 ADD: ALT 4 MS24662‐24; MS24662; RIVET, BLIND

UNIVERSAL HEAD DRAWING 12524237 CHANGE TOLERANCE BLOCK FROM: TOLERANCES:

DECIMAL +/‐ 0.3 TO: TOLERANCES: DECIMAL +/‐ 0.012 INCH (+/‐ 0.3 MM)

Use of material Compound MR 15‐50‐16 as an acceptable substitute for Ethylene Propylene Terpolymer Shore A is authorized when Ethylene Propylene Terpolymer Shore A is unavailable per ESA response to DLA 339 Case # DSCP‐FH‐20‐17168

The use of MIL‐I‐43533(SS by A‐A‐56032) instead of MIL‐P‐21563B is authorized per ESA response to DLA 339 Case # DSCP‐FH‐20‐29582.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19200 12524235

REVISION NR E DTD 07/12/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12524200

REVISION NR A DTD 08/12/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12524236

REVISION NR J DTD 06/21/1996

IAW REFERENCE DRAWING NR 19200 12524238

REVISION NR C DTD 11/13/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12524637

REVISION NR DTD 01/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12535004

REVISION NR C DTD 11/05/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12524235

REVISION NR B DTD 02/21/2024

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12524235

REVISION NR D DTD 09/17/1987

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12524235

REVISION NR B DTD 08/30/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12524235

REVISION NR DTD 02/21/2024

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12524236

REVISION NR K DTD 10/04/2000

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

(SPI) AM12524235, REVISION B, DATED 02‐21‐2024

NSN:012160094

TOOL, CLEARING SECTOR HOLDBACK

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ036

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

REFERENCE NUMBER:ZD025

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120‐30) AND THE ARMS EXPORT

CONTROL ACT (22 U.S.C.A. 2778‐2799). ANY

MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE

TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED

PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS

APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC

REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

_______________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR

MANGANESE COATING THEN MANGANESE IS REQUIRED.

______________END OF EXCEPTIONS_________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S)

APPLICABLE TO THIS CONTRACT WILL BE APPROVED

BY THE CONTRACT POST AWARD CONTRACTING OFFICER

(PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED

DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 53711 5525135

REVISION NR A DTD 10/24/1997

IAW REFERENCE DRAWING NR 53711 5525136

REVISION NR DTD 08/06/1981

IAW REFERENCE DRAWING NR 53711 5525138

REVISION NR DTD 08/09/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 WS33111

REVISION NR A DTD 07/24/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7102702

REVISION NR DTD 05/15/1997

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL‐DTL‐16232H(1)

REVISION NR 1 DTD 03/26/2021

PART PIECE NUMBER:

IAW REFERENCE UNK QPL‐3150‐34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49

WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C

UNIT CONT:D3 OPI:O

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:00 ‐00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

NSN:012929239

CROSS LEVELING MECH

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ036

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS147

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD003

REFERENCE NUMBER:CS072

REFERENCE NUMBER:CS187

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120‐30) AND THE ARMS EXPORT

CONTROL ACT (22 U.S.C.A. 2778‐2799). ANY

MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE

TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED

PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS

APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC

REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

_______________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR

MANGANESE COATING THEN MANGANESE IS REQUIRED.

12577023 MATERIAL NOTE:

FROM: MATERIAL: .12‐.46C AISI‐SAE CARBON (10XX) STEEL, NORMALIZED OR

ANNEALED. MERCHANT QUALITY AND FREE MACHINING GRADES ARE NOT ALLOWED.

TO: MATERIAL: SAE‐AISI .12 ‐ .46C (10XX) CARBON STEEL PER ASTM A108 OR

ASTM A311. MERCHANT QUALITY AND FREE MACHINING GRADES ARE NOT ALLOWED.

TDPL:

ADD: ASTM A108 AND ASTM A311

12577047 MATERIAL NOTE:

FROM: MATERIAL: .28‐.46C AISI ALLOY STEEL (4XXX OR 8XXX) STEEL. FREE

MACHINING GRADES ARE NOT ALLOWED.

TO: MATERIAL: SAE‐AISI .28 ‐ .46C (4XXX OR 8XXX) ALLOY STEEL BAR PER

ASTM A108 OR ASTM A322. MERCHANT QUALITY AND FREE MACHINING GRADES ARE

NOT ALLOWED.

TDPL:

ADD: ASTM A108 AND ASTM A311

12577053 MATERIAL NOTE:

FROM: MATERIAL: STEEL CASTING PER DWG C11577275 COMP 2 OR 3 CLASS B & E,

OR .37‐.46C, ALLOY STEEL, AISI 4XXX.

TO: MATERIAL: SAE‐AISI .37‐.46C ALLOY (4XXX) STEEL BAR PER ASTM A108 OR

ASTM A322 OR CASTING PER DWG 11577275 COMP 2 OR 3 CLASS B AND E.

MERCHANT QUALITY AND FREE MACHINING GRADES ARE NOT ALLOWED.

TDPL:

ADD: ASTM A108 AND ASTM A311

12577057 MATERIAL NOTE:

FROM: MATERIAL: .27‐.46C AISI‐SAE ALLOY STEEL (4XXX OR 8XXX) STEEL. FREE

MACHINING GRADES ARE NOT ALLOWED.

TO: MATERIAL: SAE‐AISI .27 ‐ .46C (4XXX OR 8XXX) ALLOY STEEL BAR PER

ASTM A108 OR ASTM A322. MERCHANT QUALITY AND FREE MACHINING GRADES ARE

NOT ALLOWED.

TDPL:

ADD: ASTM A108 AND ASTM A311

ALL APPLICABLE DRAWINGS:

FROM: MIL‐C‐13931

TO: MIL‐DTL‐13931

CHANGE: 12901145

FROM: (VENDORS INFORMATION FOR HENKLE/LOCKTITE) PH: 800‐562‐8483

TO: PH: 860‐571‐5100

FROM: (VENDOR INFORMATION I.T.W. DEVCON CORP.) CAGE CODE: 16059

TO: CAGE CODE: 16059, PH: 9786465853

REMOVE: (VENDOR I.T.W ITEM NO. 1) 22250 AND 27750(DISCONTINUED)

VENDOR VERIFIED DATE:

HENKLE/LOCTITE VERIFIED ALL ITEMS 19‐JUL‐2024

ITW VERIFIED 19‐JUL‐2024

ITW PARTS 22250 AND 27750 DISCONTINUED

THE GOVERNMENT SPECIAL INSPECTION EQUIPMENT (SIE) DESIGN DRAWINGS, CITED

IN THE QUALITY ASSURANCE PROVISIONS (QAPS), ARE NO LONGER BEING

MAINTAINED BY THE GOVERNMENT AND MAY NOT REFLECT THE LATEST COMPONENT

CONFIGURATION AND ARE, THEREFORE, INCLUDED FOR INFORMATIONAL PURPOSES

ONLY.

ADDED ISO 2903 TO SPECS LIST

______________END OF EXCEPTIONS__________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN

THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209‐1)

QUALIFICATION REQUIREMENTS IS APPLICABLE. THE

AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM

SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES

MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR

EVALUATION PRIOR TO CONTRACT AWARD.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19206 12577039

REVISION NR L DTD 02/08/2023

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 QAP‐APPX‐WVA

REVISION NR DTD 03/01/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR D DTD 05/13/2025

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 12901292

REVISION NR B DTD 03/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 12901145

REVISION NR C DTD 01/26/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11577275

REVISION NR P DTD 05/16/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11579832

REVISION NR F DTD 06/23/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 7309999

REVISION NR U DTD 05/16/2017

IAW REFERENCE DRAWING NR 1NUW7 8769067

REVISION NR P DTD 05/16/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577053

REVISION NR E DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12577053

REVISION NR E DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12521257

REVISION NR A DTD 04/07/1994

PART PIECE NUMBER:

IAW REFERENCE QAP 1NUW7 11579832

REVISION NR M DTD 06/23/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577022

REVISION NR C DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577023

REVISION NR D DTD 12/04/2008

PART PIECE NUMBER:

IAW REFERENCE QAP 1NUW7 QAP‐APPX‐BL

REVISION NR DTD 07/31/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12521323

REVISION NR C DTD 04/07/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12521324

REVISION NR B DTD 04/07/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12521325

REVISION NR C DTD 03/08/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12521326

REVISION NR A DTD 04/30/1992

IAW REFERENCE DRAWING NR 19206 12521374

REVISION NR B DTD 03/08/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12900890

REVISION NR K DTD 02/20/2024

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12577052

REVISION NR E DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577052

REVISION NR E DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577048

REVISION NR E DTD 05/01/2020

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12577048

REVISION NR E DTD 05/01/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577041

REVISION NR E DTD 05/01/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12521237

REVISION NR B DTD 03/08/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12521238

REVISION NR B DTD 03/08/1993

PART PIECE NUMBER:

IAW REFERENCE QAP 1NUW7 12577039

REVISION NR R DTD 02/08/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577044

REVISION NR D DTD 03/26/2006

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12577044

REVISION NR F DTD 09/10/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577047

REVISION NR F DTD 11/03/2017

IAW REFERENCE QAP 19206 12577047

REVISION NR G DTD 11/03/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577051

REVISION NR E DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577056

REVISION NR D DTD 05/01/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 12577057

REVISION NR E DTD 06/15/2007

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12577057

REVISION NR F DTD 06/15/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577058

REVISION NR E DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12577058

REVISION NR E DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577059

REVISION NR D DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12577059

REVISION NR D DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577039

REVISION NR DTD 07/17/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12901117

REVISION NR A DTD 01/26/2000

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12901117

REVISION NR B DTD 01/26/2000

IAW REFERENCE DRAWING NR 19206 12521199

REVISION NR A DTD 05/28/1993

PART PIECE NUMBER:

IAW REFERENCE QAP 1NUW7 12900890

REVISION NR T DTD 06/18/2018

PART PIECE NUMBER:

IAW REFERENCE QAP 1NUW7 12901293

REVISION NR D DTD 01/11/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12900890

REVISION NR K DTD 10/03/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12901293

REVISION NR D DTD 10/03/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12900890

REVISION NR U DTD 05/29/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12577039

REVISION NR A DTD 12/20/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13023461

REVISION NR B DTD 11/17/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 13096805

REVISION NR DTD 08/05/2020

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REFERENCE NUMBER:ZD037 OBJECT TEXT ID ST

NSN:013437571

SPRING ASSEMBLY, BREECH

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ036

REFERENCE NUMBER:RQ042

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

REFERENCE NUMBER:ZDL18

REFERENCE NUMBER:ZD003

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120‐30) AND THE ARMS

EXPORT CONTROL ACT (22 U.S.C.A. 2778‐2799).

ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES

IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF

DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF

STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY

BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT

RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE

TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL

MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD.

_______________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR

MANGANESE COATING THEN MANGANESE IS REQUIRED.

MIL‐DTL‐16232 APPLIES USE REV G. ONLY

PD12591346

DELETE CURRENT MOP AND PACKAGING STEPS AND REPLACE WITH THE FOLLOWING:

MOP WILL BE 33

STEP 1‐ PRESERVATIVE: MIL‐PRF‐3150 OR MIL‐PRF‐16173 GRADE 3

STEP 2‐ WRAP: MIL‐PRF‐3420, STYLE C (SEE NOTE A)

STEP 3‐ TAPE: ASTM D5486/D5486M, TYPE II

STEP 4‐ CUSHIONING: PPP‐C‐795

STEP 5‐ TAPE: ASTM D5486/D5486M, TYPE II

STEP 6‐ BAG: MIL‐DTL‐117, TYPE II, CLASS C

STEP 7‐ BOX: ASTM D5118/D5118M, W5c

STEP 8‐ CLOSURE: ASTM D1974/D1974M, SEALING METHOD B

IN BLOCK 14B, LEVEL C, DELETE: METHOD III

IN BLOCK 19 ADD THE FOLLOWING NOTE:

A. COMPATIBILITY IN ACCORDANCE WITH MIL‐I‐8574 SHALL BE SUCCESSFULLY

PERFORMED FOR THIS MATERIAL

ENGINEERING:

ON DRAWINGS 12591388, 12591396 AND 12591387, REPLACE CANCELLED

SPECIFICATION MIL‐STD‐1595 WITH AWS D17.1/D17.1M AND FOR CANCELLED

SPECIFICATION MIL‐STD‐1261, REFER TO SPECIFICATION AWS D1.3/D1.3M FOR

STEEL THINNER THAN 3/16 INCH THICK, OR AWS D1.1/D1.1M FOR STEEL THICKER

THAN 3/16 INCH THICK.

ON DRAWINGS 12591388 AND 12591387, REMOVE DRAWING 7309999 FROM NOTE 3

AND IN THE SPECIFICATION SUMMARY BLOCK. USE FINISH PER MIL‐DTL‐16232,

TYPE M OR Z, CLASS 3.

A. STRESS RELIEF REQUIRED.

B. HYDROGEN EMBRITTLEMENT RELIEF REQUIRED, ROOM TEMPERATURE RELIEF NOT

ALLOWED.

On Drawings 12591526, 12591529 and 12591530, Remove Drawing 7309999 from Note 4 and in the Specification Summary Block. Use FINISH PER

MIL‐DTL‐16232, TYPE M OR Z, CLASS 3.

A. STRESS RELIEF REQUIRED.

B. HYDROGEN EMBRITTLEMENT RELIEF REQUIRED, ROOM TEMPERATURE RELIEF NOT

ALLOWED.

The Government Special Inspection Equipment (SIE) design drawings, cited in the Quality Assurance Provisions (QAPs), are no longer being maintained by the Government and may not reflect the latest component configuration and are, therefore, included for informational purposes only.

REMOVE QAP 7309999 REFERENCE WITHIN QAPS. QAP 7309999 HAS BEEN

OBSOLETED, DRAWING 7309999 CONTAINS NECESSARY REQUIREMENTS.

______________END OF EXCEPTIONS__________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN

THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209‐1)

QUALIFICATION REQUIREMENTS IS APPLICABLE. THE

AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM

SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES

MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR

EVALUATION PRIOR TO CONTRACT AWARD.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19206 12591346

REVISION NR A DTD 10/21/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591387

REVISION NR A DTD 02/26/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591396

REVISION NR A DTD 02/26/1996

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 QAP‐APPX‐WVA

REVISION NR DTD 03/01/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR D DTD 05/13/2025

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 7309999

REVISION NR U DTD 05/16/2017

PART PIECE NUMBER:

IAW REFERENCE UNK QPL‐3150‐34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

IAW REFERENCE UNK QPL‐16173‐84 NOT 1

REVISION NR 84 DTD 10/29/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 8769067

REVISION NR P DTD 05/16/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591526

REVISION NR DTD 01/28/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591530

REVISION NR DTD 01/28/1991

IAW REFERENCE DRAWING NR 19206 12591529

REVISION NR DTD 01/28/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591528

REVISION NR B DTD 08/12/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12521144

REVISION NR B DTD 09/01/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591527

REVISION NR B DTD 08/12/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591388

REVISION NR A DTD 02/26/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591501

REVISION NR A DTD 07/30/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591502

REVISION NR A DTD 07/30/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591439

REVISION NR DTD 01/28/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591533

REVISION NR DTD 01/28/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591534

REVISION NR DTD 01/28/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591346

REVISION NR DTD 11/14/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591346

REVISION NR A DTD 03/11/1996

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12591346

REVISION NR B DTD 10/21/1991

IAW REFERENCE QAP 19206 12591387

REVISION NR B DTD 02/26/1996

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12591388

REVISION NR B DTD 02/26/1996

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12591396

REVISION NR B DTD 08/27/1996

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12591501

REVISION NR A DTD 07/30/1993

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12591526

REVISION NR A DTD 01/28/1991

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12591527

REVISION NR A DTD 09/30/1993

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PACKAGING SHALL BE IN ACCORDANCE WITH

SPECIAL PACKAGING INSTRUCTIONS(SPI)

SPI NUMBER: ,,AM12591346

DATE: ,,,,,, 03/11/1996

REV: ,,,,,,A

NSN:013444113

EXTRACTOR, CARTRIDGE

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ036

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

REFERENCE NUMBER:ZDL18

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120‐30) AND THE ARMS

EXPORT CONTROL ACT (22 U.S.C.A. 2778‐2799).

ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES

IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF

DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF

STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY

BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT

RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE

TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL

MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD.

______________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR MANGANESE

COATING THEN MANGANESE IS REQUIRED.

PACKAGING: REPLACE PD AM12591497 REV ‐ WITH PD

AM12591497 REV A IN TDP.

______________END OF EXCEPTIONS__________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST

BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN

THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED

DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19206 12591497

REVISION NR B DTD 10/16/1995

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 QAP‐APPX‐WVA

REVISION NR DTD 03/01/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR D DTD 05/13/2025

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL‐DTL‐16232H(1)

REVISION NR 1 DTD 03/26/2021

PART PIECE NUMBER:

IAW REFERENCE UNK DI‐NDTI‐80809B NOT 3

REVISION NR B DTD 09/24/2024

PART PIECE NUMBER:

IAW REFERENCE UNK QPL‐3150‐34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

IAW REFERENCE UNK QPL‐46147‐14 NOT 1

REVISION NR 14 DTD 07/10/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 8769067

REVISION NR P DTD 05/16/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 7309999

REVISION NR U DTD 05/16/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591497

REVISION NR DTD 04/01/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591497

REVISION NR A DTD 04/06/2021

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12591497

REVISION NR E DTD 10/16/1995

LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PKG IAW SPI AM12591497 REV A DATED 06 APR 2021

NSN:013444114

EXTRACTOR, CARTRIDGE

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ036

REFERENCE NUMBER:RQ042

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

REFERENCE NUMBER:ZD054

REFERENCE NUMBER:CQ006

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE

INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120‐30) AND THE

ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778‐2799). ANY MANUFACTURER OR

EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE

DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD.

ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO

SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

_______________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR MANGANESE COATING THEN

MANGANESE IS REQUIRED.

DRAWING 12591498:

FROM: MARKING REQUIREMENTS PER MIL‐C‐13931

X DO APPLY:

19206‐12591498

MFR TO:

MARKING REQUIREMENTS PER MIL‐STD‐130

X DO APPLY:

19206‐12591498

CDA‐1NUW7

MFR

ADD NOTE

1. MIL‐DTL‐13931 APPLIES.

12591498 MATERIAL NOTE:

FROM: MATERIAL: .37‐.46C AISI ALLOY (4XXX OR 8XXX) ALLOY STEEL. QUENCH

AND TEMPER TO HRC 31‐36.

TO: MATERIAL: SAE‐AISI .37‐.46C (4XXX OR 8XXX) ALLOY STEEL BAR PER ASTM

A108 OR A322. QUENCH AND TEMPER TO HRC 31‐36. MERCHANT QUALITY OR FREE

MACHINING GRADES ARE NOT ALLOWED.

TDPL:

DOCUMENT

DELETE: ASTM A322

ADD: ASTM A108

PD12591498*

IN BLOCK 1 CHANGE THE NSN FROM: 1015‐99‐962‐6057 TO: 1015‐01‐344‐4114

IN BLOCK 11, CHANGE THE UNIT PACK CUBE

FROM: 0.014

TO: 0.063

IN BLOCK 12, CHANGE THE UNIT PACK SIZE

FROM: 0.45' X 0.97' X 0.10'

TO: 9.0" X 4.0" X 3.0"

DELETE CURRENT MOP AND PACKAGING STEPS AND REPLACE WITH THE FOLLOWING:

MOP WILL BE 33

STEP 1‐ PRESERVATIVE: MIL‐PRF‐3150

STEP 2‐ WRAP: MIL‐PRF‐3420 STYLE C (SEE NOTE A)

STEP 3‐ TAPE: ASTM D5486/D5486M TYPE II

STEP 4‐ BAG: MIL‐DTL‐117 TYPE II, CLASS C

IN BLOCK 14B, LEVEL C, DELETE: SEE NOTE (1)

IN BLOCK 19 DELETE NOTE (1) AND REPLACE WITH THE FOLLOWING:

A. COMPATIBILITY IN ACCORDANCE WITH MIL‐I‐8574 SHALL BE SUCCESSFULLY

PERFORMED FOR THIS MATERIAL.

THE FOLLOWING CLAUSES APPLY TO ALL DOCUMENTS WITHIN THE INSPECTION

DRAWINGS AND DOCUMENTS SECTION OF THE TDPL:

SPECIAL INSPECTION EQUIPMENT

THE GOVERNMENT SPECIAL INSPECTION EQUIPMENT (SIE) DESIGN DRAWINGS, CITED

IN THE QUALITY ASSURANCE PROVISIONS (QAPS), ARE NO LONGER BEING

MAINTAINED BY THE GOVERNMENT AND MAY NOT REFLECT THE LATEST COMPONENT

CONFIGURATION AND ARE, THEREFORE, INCLUDED FOR INFORMATIONAL PURPOSES

ONLY.

GAGE

THE TDP CONTAINS GAGE DRAWINGS THAT ARE TO BE CONSIDERED "FOR

INFORMATIONAL PURPOSES ONLY" AND ARE NOT UP TO DATE WITH THE LATEST

DRAWING REVISION. THE USE OF GAGES IS OPTIONAL AND NOT A REQUIREMENT.

WHEREVER APPLICABLE, DELETE ALL REFERENCES TO GAGES AND REPLACE WITH

STANDARD MEASURING & TEST EQUIPMENT. IN ADDITION, THESE GAGE DRAWINGS

SHOULD BE REMOVED FROM TDP.

AIE

ALL GOVERNMENT AIE (EL DOCUMENTS) DESIGNS WHICH ARE CITED IN THE

TECHNICAL DATA PACKAGE LIST OR IN ANY OF THE DOCUMENTS IN THE TECHNICAL

DATA PACKAGE ARE NO LONGER BEING MAINTAINED BY THE GOVERNMENT, MAY NOT

REFLECT THE LATEST COMPONENT CONFIGURATION AND ARE, THEREFORE, INCLUDED

FOR INFORMATIONAL PURPOSES ONLY.

QAP 7309999 REFERENCES WITHIN QAPS

REMOVE QAP 7309999 REFERENCE WITHIN QAPS. QAP 7309999 HAS BEEN

OBSOLETED, DRAWING 7309999 CONTAINS NECESSARY REQUIREMENTS.

ADD TO INSPECTION SPECIFICATIONS:

ASTM E709

MIL‐STD‐410 ‐> REPLACED BY AIA/NAS NAS410

______________END OF EXCEPTIONS__________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN

THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209‐1)

QUALIFICATION REQUIREMENTS IS APPLICABLE. THE

AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM

SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES

MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR

EVALUATION PRIOR TO CONTRACT AWARD.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19206 12591498

REVISION NR B DTD 10/16/1995

IAW REFERENCE QAP 19206 QAP‐APPX‐WVA

REVISION NR DTD 03/01/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 7309999

REVISION NR U DTD 05/16/2017

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL‐DTL‐16232H(1)

REVISION NR 1 DTD 03/26/2021

PART PIECE NUMBER:

IAW REFERENCE UNK QPL‐3150‐34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 8769067

REVISION NR P DTD 05/16/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591498

REVISION NR DTD 03/08/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12591498

REVISION NR DTD 01/25/1989

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 12591498

REVISION NR E DTD 03/01/1996

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

PKG IAW WITH SPI P12591498 DATED 05 MAY 1989

SEE SECTION C FOR CHANGES/UPDATES TO SPI.

TO INCLUDE ‐ CHANGE NSN ON SPI TO 1015‐01‐344‐4114.

NSN:014984269

BATTERY ASSEMBLY

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RD005

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:ZD072

REFERENCE NUMBER:CA070

REFERENCE NUMBER:ZD025

SEALED LEAD ACID CELL

UNIT OF ISSUE IS EA, WITH EA = 1 ITEM.

SHELF LIFE TYPE 1, 60 MONTHS

REFERENCE NUMBER:RS023

IAW BASIC DRAWING NR 19200 12910750

REVISION NR A DTD 09/12/2002

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12910750

REVISION NR DTD 12/05/2001

IAW REFERENCE DRAWING NR 19200 9362541

REVISION NR B DTD 04/02/1991

IAW REFERENCE DRAWING NR 19200 12561820

REVISION NR D DTD 09/12/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12562356

REVISION NR D DTD 09/12/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL‐STD‐129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL‐STD‐130N(1) NOT 1

REVISION NR N DTD 08/26/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910751

REVISION NR A DTD 05/23/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910756

REVISION NR A DTD 08/19/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910758

REVISION NR DTD 12/05/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910757

REVISION NR DTD 12/05/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910751

REVISION NR DTD 02/27/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910750

REVISION NR DTD 05/18/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910750

REVISION NR DTD 01/12/2011

LINE ITEM 00009 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

Packaging and preservation shall be IAW SPI: (AM)P12910750.

Shelf life type I, 60 months.

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

NSN:015021009

BATTERY, STORAGE

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD080

FED‐STD‐313E, HAZMAT‐SDS

REFERENCE NUMBER:RQ034

TYPE I, 60 MONTHS SHELF LIFE

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:CA070

REFERENCE NUMBER:ZD025

ENGINEERING EXCEPTIONS:

UPDATE NSN ON PACKAGING DRAWING TO: 6140‐01‐502‐1009

DWG,,12562356,,NOTE 1 ‐ REPLACE MIL‐F‐139263 WITH MIL‐F‐13926.

DWG,,12910815 ‐ REPLACE MIL‐STD‐00100 WITH MIL‐STD‐100.

DWG,,12910756 ‐ REPLACE MIL‐STD‐2000 WITH IPC/EIA‐J‐STD‐001.

DWG,,12910756 ‐ REPLACE MIL‐M‐81594 WITH SAE‐AS5942.

DWG,,12910756 ‐ REPLACE MIL‐M‐81531 WITH SAE‐AS5942.

DWG,,12948181 ‐ REPLACE MIL‐STD‐2000 WITH IPC/EIA‐J‐STD‐001.

DWG 12948181 ‐ REPLACE MIL‐M‐81594 WITH SAE‐AS5942.

DWG 12948181 ‐ REPLACE MIL‐M‐81531 WITH SAE‐AS5942.

DWG 12910747 ‐ REPLACE MIL‐P‐15024/6 WITH MIL‐DTL‐15024.

DWG 12910757 ‐ REPLACE NEMA‐DC‐2 WITH UL310.

DWG 12910758 ‐ REPLACE NEMA‐DC‐2 WITH UL310.

DWG 12910750 ‐ REPLACE TT‐L‐50 WITH MIL‐PRF‐81352.

DWG 12910813 ‐ REPLACE TT‐L‐50 WITH MIL‐PRF‐81352.

DWG 12590814 ‐ REPLACE TT‐L‐50 WITH MIL‐PRF‐81352.

REFERENCE NUMBER:RS023

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19200 12910815

REVISION NR E DTD 12/18/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369004

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910750

REVISION NR A DTD 09/12/2002

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12910750

REVISION NR DTD 12/05/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9362541

REVISION NR B DTD 04/02/1991

IAW REFERENCE DRAWING NR 19200 12561820

REVISION NR D DTD 09/12/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12561821

REVISION NR D DTD 12/05/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12562356

REVISION NR D DTD 09/12/2002

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12948181

REVISION NR A DTD 12/02/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12561819

REVISION NR C DTD 09/12/2002

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL‐STD‐129R(3)

REVISION NR R DTD 02/25/2023

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL‐STD‐130N(1) NOT 1

REVISION NR N DTD 08/26/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910815

REVISION NR DTD 10/12/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910747

REVISION NR DTD 12/05/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910751

REVISION NR A DTD 05/23/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910756

REVISION NR A DTD 08/19/2003

IAW REFERENCE DRAWING NR 19200 12910758

REVISION NR DTD 12/05/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910757

REVISION NR DTD 12/05/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910813

REVISION NR C DTD 08/09/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910814

REVISION NR C DTD 05/23/2006

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12910814

REVISION NR B DTD 07/12/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12948181

REVISION NR D DTD 09/12/2002

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12910813

REVISION NR A DTD 07/12/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12910815

REVISION NR DTD 08/27/2002

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00010 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:32 ‐32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

Shelf‐life TYPE I (CODE S) item with a shelf life of 60 months

THE MATERIAL SHALL BE PACKAGED IN ACCORDANCE WITH SPI: (AM)P12910815.

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RD004

RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self‐Assessment

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW‐ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RD001

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

(CATEGORY I ‐ MUNITIONS LIST ITEMS, CATEGORY I‐DODM 4160.28‐VOL.3)

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON‐MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT ‐ ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON‐ACCEPTED SUPPLIES

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export‐control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225‐7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export‐control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export‐Controlled Technical Data Training and the DLA Export‐Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export‐controlled data. Instructions for obtaining access to the export‐controlled data can be found at:

https://www.dla.mil/Logistics‐Operations/Enhanced‐Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export‐controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export‐controlled data.

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER CS147

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER ES371

The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.

(End of TQ Requirement)

REFERENCE NUMBER CS072

CLASS 3 THREADS APPLY TO THIS NSN.

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER ZDP01

FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS

(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN

EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE

PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE

BAG IN ACCORDANCE WITH MIL‐DTL‐117, TYPE II, CLASS C, STYLE 1.

THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN

MILITARY SALES (FMS) AND STOCK SHIPMENTS.

REFERENCE NUMBER IS001

MIL‐STD‐130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY…