PHX ATCT Flagpole Installation Statement of Work.docx
DOCX document 66 KB Posted
- Attached to
- Sky Harbour ATCT, Phoenix, AZ Flagpole Installation Project Federal contract opportunity
- Solicitation number
- 697DCK-24-R-00298
About this file
This document is a Statement of Work (SOW) for the Phoenix Sky Harbour ATCT Flagpole Installation Project. The proposed scope of work includes furnishing and installing three flagpoles with flags and accessories, building a concrete walkway, installing ground-mounted up-lights for flag illumination, and underground conduit and wiring. The period of performance is estimated to be 30 calendar days, with work hours from 0700-1730, Monday-Thursday.
The related federal contract opportunity is a Request for Proposal (RFP) issued by the Federal Aviation Administration (FAA) for the same project. The RFP outlines the NAICS code, small business size standard, and set-aside requirements. A site visit is strongly encouraged, and potential offerors must have a current registration in the Central Contractor Registry database. Proposals are due by 24 April 2024, 5:00 PM Eastern Daylight Time, and must be submitted via email. The FAA will respond to questions in writing within five business days on the SAM.gov website.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 697DCK-24-R-00298 Amendment 5.pdf | ||
| 697DCK-24-R-00298 Amendment 4...pdf | ||
| 697DCK-24-R-00298 Amendment 3.pdf | ||
| 697DCK-24-R-00298 Amendment 2.pdf | ||
| PHX-19004858-C001-Rev1.pdf | ||
| 697DCK-24-R-00298 Amendment 1.pdf | ||
| 697DCK-24-R-00298 Phuenix AZ Flagpole Installation Project.pdf | ||
| PHX-19004858-G001.pdf | ||
| PHX-19004858-G002.pdf | ||
| General Decision Number AZ20240039 01.19.2024.pdf | ||
| PHX FLAGPOLE COST Breakdown.xlsx | XLSX spreadsheet | |
| PHX-19004858-C001.pdf | ||
| Supplemental Information.pdf |
Show all 13
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
U.S. Department of Transportation
Statement of Work
Project: PHX ATCT Flagpole Installation
Location: Sky Harbour Airport ATCT 3500 Sky Harbour Blvd Phoeinx, AZ 85034
PROJECT ENGINEER:
Mohammed Al Amarri, Mechanical Engineer, AJW-2C11C, Terminal Engineering Center (Fort Worth)
CSA Engineering Services Terminal Engineering Center, AJW-2C11C 10101 Hillwood Parkway, Fort Worth, Texas 76177
1.0 Scope of Work
The proposed scope of work for this project is as follows:
A. Furnish and install 3 flagpoles with flags and accessories at the front of the main entrance of the building. Exposed flag heights as follows:
A.1. 30 feet flagpole with us flag placed in the middle A.2. 25 feet flagpole with arizona state flag placed to the east of the us flag.
A.3. 25 feet flagpole with faa agency flag placed to the west of the us flag.
B. Build a concrete walkway as shown in the drawing.
C. Furnish and install ground mounted up lights for flags illumination.
D. Install underground conduit and wiring for the flag illumination lights.
E. Perform ground penetrating radar (gpr) conduit and cable locating prior to any earth work. mark all determined underground obstructions with paint and flags. Report findings to the FAA.
E.1. Excavation machinery is not allowed within 3 feet of located underground cables and utilities. Hand tools must be used within 3 feet of located underground cables and utilities.
F. Period of performance is estimated to be 30 calander days. Work hours are 0700-1730, Monday-Thursday.
2.0 Applicable Documents
A. Project engineering drawings B. FAA-STD-019f, “Lightning and Surge Protection, Grounding, Bonding and Shielding Requirements for Facilities and Electronic Equipment” C. FAA-C-1391F, Installation, Termination, Splicing, And Transient/Surge Protection Of Underground Electrical Distribution System Power Cables
3.0 Required Submittals
A. Product data: for each type of product indicated. Include construction details, material descriptions, dimensions of individual components and profiles, operating characteristics, fittings, accessories, and finishes for flagpoles.
B. Shop drawings: for flagpoles. Include plans, elevations, details, and attachments to other show general arrangement, jointing, fittings, accessories, grounding, anchoring, and support.
C. Product data for flag illumination lights to be installed.
PHX Flagpole Installation at Sky Harbour Airport ATCT 3of7
PHX Flagpole Installation at Sky Harbour Airport ATCT 1of2 image1.wmf
File details come from the government source that posted it. Updated .