PGC03432 Interim Changes.pdf

Trousers, Men's, Dress, Polyester/wool, shall be made in accordance with GL-PD 07-05C (Class 2, Style 1) dated 4 March 2009.

Pattern date: 5 August 2010

Standard sample of cloth, serge, 60% polyester/40% wool, Army blue shade 451, is available and applicable for shade only under roll number 3800

Cloth shall be in accordance with type III, class 4 of MIL-DTL-823

Standard sample of Gold Ornamental Braid is available and applicable for shade only under Roll # 3771

ACCEPTABILITY OF LOTS SHALL BE DETERMINED BY THE USE OF "SAMPLING

PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES",

ANSI/ASQC Z1.4

GENERAL INSPECTION LEVEL 2

AQL's FOR PURCHASE DESCRIPTION

END ITEM DIMENSIONAL 4.0

VISUAL 6.5

INTERIM SPECIFICATION CHANGES TO GL-PD 07-05C:

PAGE 2, Table II: Delete sizes listed for "29R, 30R, 30L, 30XL, 31R and 31L".

PAGE 6, Paragraph 3.5.2: Delete in its entirety and substitute the following:

"3.5.2 Hook and eye. The hook and eye for waistband closure shall be Industrial Machining and Design Services, Inc. Part No. IMDSDS-008 (#8 nickel plated hook) and Part No.IMDSDS-085 (#85 nickel plated eye);

Metalform Part No. 1666 (H49/E50 complete set); YKK Snap Fasteners America Part No. 829-0000-310 (#8 Hook), Part No. 830-0000-310 (#85 Eye), Part No.

PF5-0000-340 (#8 Hook Plate), and Part No. PF6-000-340 (#85 Eye Plate) available from Snapco Manufacturing Corporation, or equal. The finish of both components shall be nickel plate (see 6.8). Prior to the use of an "or equal" item, the contractor shall submit the item with supporting data to the contracting officer for approval."

PAGE 7, Paragraph 3.5.4, line 5, after "braid": Add "and the bartacks placed on the braid". Line 6, after "goldenlite.": Add the following new sentence "When stitching the ornamental braid to the trouser, the bobbin thread shall match goldenlite.".

Page 7, Para 3.5.4.1 Machine thread. Delete the first line and replace with the following: "The thread for automatic machine pocket construction shall be Type I, Tex size 50, 3-ply of A-A-50199.".

Page 7, Paragraph 3.5.6, at the end of paragraph after "goldenlite", add the following to the end of the paragraph: "roll number 3771. All dye lots shall be presented to the Defense Logistics Agency Laboratory for shade evaluation before use on trousers. The braid must be certified by the Natick Soldier Center, Uniform Quality Control Team, ATTN: RDNS-WPC, Kansas Street, Natick, MA 01760. Refer to contract for list of certified braid manufacturers."

Note: Ornamental braid consisting of nylon fiber or polyester fiber are currently both available domestically, in compliance with the Berry Amendment. Ornamental braid, using rayon fiber, may only be used if domestic sources are no longer available.

The shade of the braid shall be approved by the contracting activity (as specified in the contract) prior to applying the braid to the trousers."

Page 7, paragraph 3.5.6.1, line 4: Delete "+1/16, -0" and substitute "+1/16,-1/32".

Page 7, After paragraph 3.5.6.1: Insert new paragraph as follows: "3.5.6.2 Braid appearance. The braid appearance at pocket area and leg shall show a minimum rating of 4 when evaluated using The Army Service Uniform (ASU) Trouser/Slacks Braid Appearance Instructions with USANSRDEC Photographic Standards for Pocket Braid and USANSRDEC Photographic Standards for Trouser Braid (see 6.9)."

PAGE 7, Pargraph 3.5.7 Permanent creases. The trousers shall have permanent silicone creases (see 6.6). Each pair of trousers shall have a single continuous 1/16 +1/32, -0 inch silicone adhesive non-staining bead applied to the back side of the basic material in the center of each of the four prepressed leg creases to form permanent creases. Each bead shall be applied evenly and equally from the top of the crotch to within 2(+-1/4)inches of the unfinished trouser bottom. There shall be no variation in the sharpness of the creases at front and back parts of the legs. Where resin misses the crease for any reason, it should be re-applied into the crease. The resin may extend beyond the crease at the top of front and back crease by 2 inches without having to be cleaned.

When the resin extends more than 2 inches it shall be cleaned by the manufacturer. Also any spot of resin less than 1/4 inch in diameter on the back side of the material does not have to be cleaned. The finished permanent creases shall show no evidence of flaking, decomposition, failure to retain creases, cracking, staining, strike back onto face of material or increased stiffness. The trousers shall have a minimum rating of "3" when evaluated for permanent crease resistance to dry heat (3 exposures) in accordance with AATCC 117, at a maximum of 400°F, and steam pressing and perchlorethylene solvent (3 exposures) in accordance with

AATCC 132.

Page 8, Paragraph 3.6, at the end of the paragraph add the following:

"Each pair of trousers shall contain a DLA Exclusive woven label."

Page 9, After Paragraph 3.6.4 insert the following Paragraph: "3.6.5 DLA Exclusive Woven Label. The jacquard woven Exclusive label shall specify "Made exclusively for Defense Logistic Agency" and shall include "by" and the contractor's name. The label shall be sewn on the inside of the left back pocket to finish between the bottom of the trouser curtain and the top of the welt stitching. The label shall face the wearer. The proposed finished label's design shall be submitted to the contracting officer for approval. "

PAGE 11, Paragraph 3.9.1.7, line 3: Delete "outside" and substitute "inside".

PAGE 12, Paragraph 3.9.4.2, at end of paragraph: Add "The waistband shall be mitered in accordance with the waistband pattern piece.".

PAGE 12, Paragraph 3.9.4.4, line 6: Delete "1/2 inch" and substitute "1/4 inch". Line 3, after "1/16 inch from seam and": Add "for Class 1 only".

PAGE 12. Paragraph 3.9.4.5, line 2, after "is closed.": Add "The distance of the J-stitch shall be 1-3/8 (+-1/16) inches." Add the following to the end of the paragraph: "The left fly shall be trimmed in accordance with the notch on pattern."

PAGE 13, Paragraph 3.9.4.6: Add the following to the end of the paragraph: "The hip pocket bags shall be made to conform to the shape shown on Figure 3."

PAGE 13, Paragraph 3.9.4.8, line 3: Delete "as indicated on pattern;" and substitute "centered between center front and side seam (see Figure 1).".

PAGE 13, Paragraph 3.9.4.10, line 1, after "(1/4 inch": Delete "off".

PAGE 16, Table V, under "1/2 hip" for size "44A": Delete "27-1/2" and substitute "27".

PAGE 18, add new paragraph: "4.5.1 Braid appearance. In addition to the testing specified in 4.5, the trousers shall be inspected for braid appearance specified in 3.5.6.2."

PAGE 19, Paragraph 6.4: Line 3, delete from "through http://warfighter.dla.mil" to end of paragraph. Insert "at http://www.dscp.dla.mil/Portal/sreqfrm.aspx."

PAGE 19, Paragraph 6.6:

Line 3, after "2": add "(+-1/4)", lines 4-5, after "1/16": Delete "(nominal)" and substitute "+1/32, -0".

Pages 19-20, 6.6.2: Delete with no substitute.

PAGE 20, after Paragraph 6.6, add the following new paragraph:

"6.7 Hook and eye suggested sources of supply. A known source for Part Numbers IMDSDS-008 and IMDSDS-085 is Industrial Machine and Design. 2007 South Avenue, Youngstown, OH 44502-2245, http://www.imds-ohio.com. A known source for Part Number 1666 is Metalform Co, Inc., 555 John Downey Drive, New Britain, CT 06051, http://www.metalformcompany.com. A known source of supply for Part Numbers 829-0000-310, 830-0000-310, PF5-0000-340 and PF6-0000-340 is Snapco Manufacturing Corporation, 140 Central Avenue, Hillside, N.J. 07205, http://snapcofasteners.com."

Page 20, After paragraph 6.7, add the following new paragraph:

"6.8 Source for Replica Standards. USANSRDEC Photographic Standards for Pocket Braid and USANSRDEC Photographic Standards for Trouser Braid are available upon request from Natick Soldier Center, RDECOM, ATTN: Textile Materials Evaluation Team, Kansas Street, Natick, MA 01760-5019."

Page 20, Paragraph "6.7 Subject Terms(key words) listing", Delete paragraph number "6.7" and substitute "6.9".

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

Suggested Sources for Silicone creasing: Supercrease, Inc (formerly Lintrak) 7454 Yonie Ct Las Vegas, NV 89117-2161 Phone: (310) 994-6488 Toll free: (702) 500-0145 Email: mailto:chris@supercrease.com CREASET INC, 4276-5 Industrial Pl. Island Park, NY 11558 Phone: (516) 897-4583

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE

FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR

PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD

BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH

TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A

HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND

READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT

CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST

APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM

TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE

ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S

LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL

PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN

APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE

SENSTIVE LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE

TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR MIL-STD-1488:

PAGE 2, PARAGRAPH 4, UNDER "DOCUMENT" DELETE "MIL-T-43654...ARCTIC" AND

SUBSTITUTE "CO/PD-99-19 CLASSIFICATION U TROUSERS, SNOW CAMOUFLAGE,

WHITE"

INTERIM CHANGES TO MIL-STD-1488G:

PAGE 21 DEFECT XXX. POCKET OR FLAP., PARAGRAPH "A" AT THE END OF THE

PARAGRAPH DELETE IN IT'S ENTIRETY AND SUBSTITUTE:

D SD U

1. MORE THAN 1/2 INCH * 3 2

2. MORE THAN 1/4 UP TO 1/2 INCH 3 3 2

3. MORE THAN 1/8 UP TO 1/4 INCH 2 2 1

PAGE 6, TABLE I DELETE IN ITS ENTIRETY AND SUBSTITUTE "TABLE I SAMPLING

PROVISIONS FOR END ITEM VISUAL EXAMINATION OF DRESS (D) TROUSERS:

NORMAL INSPECTION:

LOT SIZE SAMP SZ MAX ACC MAX ACC PT VALUE

NUM FOR

SELECTED

DEFECTS

(SEE 1.2)

UP THRU 90 20 0 3 PT 6 PT

91 THRU 150 32 0 5 PT 9 PT

151 THRU 280 50 0 7 PT 13 PT

281 THRU 500 80 0 9 PT 17 PT

501 THRU 1200 125 1 14 PT 25 PT

1201 THRU 3200 200 1 18 PT 33 PT

3201 THRU 10,000 315 2 24 PT 48 PT

10,001 THRU 35,000 500 3 35 PT 72 PT

35,001 AND OVER 800 5 55 PT 110 PT

TIGHTENED INSPECTION:

UP THRU 150 32 0 2 PT 5 PT

151 THRU 280 50 0 3 PT 7 PT

281 THRU 500 80 0 5 PT 11 PT

501 THRU 1200 125 1 9 PT 17 PT

1201 THRU 3200 200 1 13 PT 26 PT

3201 THRU 10,000 315 2 20 PT 39 PT

10,001 THRU 35,000 500 3 30 PT 59 PT

35,001 AND OVER 800 5 45 PT 89 PT

REDUCED INSPECTION:

UP THRU 280 20 0 2-6 PT 11 PT

281 THRU 500 32 0 3-9 PT 15 PT

501 THRU 1200 50 0 5-10 PT 18 PT

1201 THRU 3200 80 0 8-13 PT 24 PT

3201 THRU 10,000 125 1 12-17 PT 28 PT

10,001 THRU 35,000 200 1 17-21 PT 33 PT

35,001 AND OVER 800 2 23-29 PT 47 PT

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND VALUE HAS NOT BEEN

EXCEEDED, ACCEPT THE LOT BUT REINSTATE NORMAL INSPECTION (SEE 6.4.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT VALUE.

TABLE II DELETE IN ITS ENTIRETY AND SUBSTITUTE: "TABLE II SAMPLING

PROVISIONS FOR END ITEM VISUAL EXAMINATION OF SEMI-DRESS (SD) TROUSERS:

NORMAL INSPECTION:

LOT SIZE SAMP SIZE MAX ACCP PT VALUE

3&2 PT 3.2.&1 PT

DEFECTS DEFECTS

UP THRU 500 50 7 PT 14 PT

501 THRU 1200 80 9 PT 20 PT

1201 THRU 3200 125 14 PT 26 PT

3201 THRU 10,000 200 19 PT 38 PT

10,001 THRU 35,000 315 27 PT 57 PT

35,001 AND OVER 500 41 PT 85 PT

TIGHTENED INSPECTION:

UP THRU 500 50 3 PT 10 PT

501 THRU 1200 80 5 PT 15 PT

1201 THRU 3200 125 8 PT 23 PT

3201 THRU 10,000 200 12 PT 34 PT

10,001 THRU 35,000 315 19 PT 52 PT

35,001 AND OVER 500 27 PT 78 PT

REDUCED INSPECTION:

UP THRU 1200 32 3-8 PT 15 PT

1201 THRU 3200 50 5-9 PT 18 PT

3201 THRU 10,000 80 8-12 PT 24 PT

10,001 THRU 35,000 125 11-15 PT 31 PT

35,001 AND OVER 200 15-53 PT 43 PT

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND VALUE HAS NOT BEEN

EXCEEDED, ACCEPT THE LOT BUT REINSTATE NORMAL INSPECTION (SEE 6.4.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT VALUE.

TABLE III DELETE IN ITS ENTIRETY AND SUBSTITUTE: "TABLE III SAMPLING

PROVISIONS FOR END ITEM VISUAL EXAMINATION OF UTILITY (U) TROUSERS:

NORMAL INSPECTION:

LOT SIZE SAMP SIZE MAX ACCP PT VALUE

3&2 PT 3.2.&1 PT

DEFECTS DEFECTS

UP THRU 500 50 9 PT 17 PT

501-1200 80 13 PT 20 PT

1201-3200 125 18 PT 29 PT

3201-10,000 200 25 PT 42 PT

10,001 & OVER 315 39 PT 62 PT

TIGHTENED INSPECTION:

UP THRU 500 50 5 PT 11 PT

501-1200 80 8 PT 17 PT

1201-3200 125 12 PT 25 PT

3201-10,000 200 19 PT 38 PT

10,001 & OVER 315 27 PT 57 PT

REDUCED INSPECTION:

3&2 PT /1 3,2&1 PT

UP THRU 1200 32 5-9 PT 16 PT

1201-3200 50 8-12 PT 20 PT

3201-10,000 80 11-14 PT 25 PT

10,001 & OVER 125 15-19 PT 29 PT

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND VALUE HAS NOT BEEN

EXCEEDED, ACCEPT THE LOT BUT REINSTATE NORMAL INSPECTION (SEE 6.4.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT VALUE."

PAGE 26, UNDER "LABEL" DEFECT ADD THE FOLLOWING NEW DEFECT AND POINT

VALUES:

"C. BAR CODE LABEL/TAG. D SD U

1. NOT READABLE BY SCANNER 1 1 1

2. HUMAN READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE.

1 1 1

3. NOT VISIBLE ON FOLDED, PACKAGED ITEM. 1 1 1

4. CAUSES DAMAGE TO THE ITEM. 3 3 3

(ref. T0339 - May 22, 2006-REVISED)

ADDITIONAL INFORMATION FOR A-A-50198A, THREAD, GIMP, COTTON, BUTTONHOLE:

NO ADDITIONAL INFORMATION FOLLOWS.

A-A-52094B Thread, Cotton dated 01 May 2019 No Additional Information (ref. T1481)

ADDITIONAL INFORMATION FOR A-A-55634A, 23 MARCH 2004:

SPECIAL NOTE!! ALL SLIDE FASTENERS USED ARE TO BE MEASURED FROM "STOP TO

STOP". RECOMMEND THAT THIS MEASUREMENT BE TAKEN RANDOMLY BEFORE SLIDE

FASTENERS ARE SEWN TO THE ITEMS, COVERALL, OR ANY ITEM REFERRED TO IN THE

SOLICITATION. "THE QAR WILL REJECT ANY SLIDE THAT IS NOT LAYING FLAT

AFTER IT IS SEWN INTO/ONTO AN ITEM." SPECIAL INFO ON ITEMS THAT UTILIZE

SLIDE FASTENERS IS GIVEN BY "ALL USING MILITARY PERSONNEL".

ADDITIONAL INFORMATION FOR MIL-B-13466:

SHADE SHALL BE IN ACCORDANCE WITH ROLL NUMBER 3771

INTERIM SPECIFICATION CHANGES TO MIL-B-13466E:

PAGE 1, PARAGRAPH 1.2, CLASSIFICATION. UNDER

"TYPE II- LACE, WOVEN CLASS 1 - PLAIN WITH

VELLUM STRIPE" ADD "STYLE C - 3/4 INCH

STYLE D - 1 INCH"

PAGE 3: ADD THE FOLLOWING UNDER PARAGRAPH 2.2:

REPEAT INSULT PATCH TEST - MODIFIED DRAIZE PROCEDURE - PRINCIPLES AND

METHODS OF TOXICOLOGY(4TH EDITION), A. WALLACE HAYES (EDITOR) PP 1057-

1060, 2001(COPIES ARE AVAILABLE ON-LINE AT

HTTP://WWW.TAYLORANDFRANCIS.CO.UK/ OR FROM TAYLOR AND FRANCIS, 325

CHESTNUT STREET, PHILADELPHIA, PA 19106.)"

PAGE 7, PARAGRAPH 3.5.3, TYPE I, CLASS 3 LINE 1,

ADD AFTER "THE 1/2 INCH BRAID" "OR LACE".

PAGE 8, PARAGRAPH 3.5.3.1, BRAID, 1/2 INCH.

- LINE 1, ADD AFTER "THE BRAID" "OR LACE".

-LINE 5, ADD AFTER "TABLE III" "OR TABLE IV"

PAGE 8 PARAGRAPH 3.5.5 LINE 4 AFTER (SEE 3.3.2).

ADD "AS AN ALTERNATE POLYESTER MAY BE USED FOR

THE FILLING YARN.

PAGE 11, TABLE IV: DELETE IN ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING

NEW TABLE IV:

"TABLE IV. PHYSICAL REQUIREMENTS FOR TYPE II WOVEN LACE

Class/Style/ Width (Tolerance + 1/32,-0)inches/Total No. of ends (warp)min/ Weight per lin. Yard (ozs)/

1 A 1/2 128 0.20 1 B 1-1/2 300 0.50 1 C 3/4 170 0.24 1 D 1 230 0.30

2 A 3/4 172 1/ 0.24 2 B 1-3/4 456 2/ 0.60

Picks per inch (fill), min/ Number of Vellum 230 3/ 2 230 2 230 2 230 2 230 - 230 -

WEAVE PATTERN/ RIBS PER INCH (CENTER STRIPE)

1 A FILLING EFFECT -

. (SEE 3.6.1)

1 B FILLING EFFECT -

1 C FILLING EFFECT -

1 D FILLING EFFECT -

2 A FILLING EFFECT 3/ 22

2 B FILLING EFFECT 4/ 22

WARP BREAKING STRENGTH (POUNDS) MIN

1/ ARRANGED 51 LEFT; 70 CENTER STRIPE; 51 RIGHT

2/ ARRANGED 128 LEFT; 200 CENTER STRIPE; 128 RIGHT

3/ TWO PICKS PER SHED, WHEN USING NEEDLE OR SHUTTLELESS LOOM

4/ 1/4 INCH GOLD COLOR, 1/4 INCH BRANCH OF SERVICE COLOR, 1/4 INCH

GOLD COLOR

5/ 1/2 INCH GOLD COLOR, 3/4 INCH BRANCH OF SERVICE COLOR

(SEE 3.5.5.1), 1/2 INCH GOLD COLOR"

PAGE 12 , ADD NEW PARAGRAPH:

"3.6.1.1 VELLUMS. THE VELLUMS ON THE LACE SHALL BE SYMMETRICAL

WITH BOTH SETS OF VELLUMS THE SAME WIDTH AND EQUIDISTANCE FROM THE EDGES

OF THE LACE."

PAGE 12, ADD THE FOLLOWING NEW PARAGRAPHS:

"3.6.3 FINISH. THE TYPE II, CLASS 1 LACE SHALL BE PRESHRUNK. THE

LACE MAY HAVE A FINISH TREATMENT APPLIED TO ASSIST IN STABILIZING THE LACE

AND PREVENTING WAVINESS AND PUCKERING. ANY FINISH SHALL MEET THE TOXICITY

REQUIREMENTS IN 3.10.

3.6.4 DIMENSIONAL CHANGE TO DRY-CLEANING. THE TYPE II, CLASS 1

LACE SHALL NOT SHRINK OR ELONGATE MORE THAN 1 PERCENT IN THE WARP

DIRECTION AFTER 1 DRY-CLEANING WHEN TESTED AS SPECIFIED IN 4.4.3.

3.6.4.1 DIMENSIONAL CHANGE TO LAUNDERING. THE TYPE II, CLASS 1

LACE, WHEN MANUFACTURED WITH A POLYESTER FILL, SHALL NOT SHRINK OR

ELONGATE MORE THAN 1 PERCENT IN THE WARP DIRECTION AFTER 3 COMPLETE

LAUNDERING CYCLES WHEN TESTED AS SPECIFIED IN 4.4.3."

PAGE 13, ADD THE FOLLOWING NEW PARAGRAPH:

"3.10 TOXICITY. THE FINISHED LACE SHALL NOT PRESENT A HEALTH

HAZARD AND SHALL SHOW COMPATIBILITY WITH PROLONGED, DIRECT SKIN CONTACT

WHEN TESTED AS SPECIFIED IN 4.4.3. CHEMICALS RECOGNIZED BY THE

ENVIRONMENTAL PROTECTION AGENCY (EPA) AS HUMAN CARCINOGENS SHALL NOT BE

USED."

PAGE 19, IN TABLE VIII, UNDER "LACE ONLY", ADD THE FOLLOWING IN THEIR

RESPECTIVE COLUMNS:

"DIMENSIONAL CHANGE:

TO DRY-CLEANING (1 CYCLE) 3.6.4 AATCC 158 5/

TO LAUNDERING (3 CYCLES) 3.6.4.1 AATCC 135 6/"

PAGE 19, IN TABLE VIII, UNDER "BRAID AND LACE" ADD THE FOLLOWING IN THEIR

RESPECTIVE COLUMNS:

"TOXICITY 3.10 4.5.2"

PAGE 20, ADD THE FOLLOWING FOOTNOTES:

"5/ EXCEPT THE SPECIMEN SHALL BE 20-INCHES LONG AND FULL

WIDTH.

6/ MACHINE CYCLE, PERMANENT PRESS; WASH TEMPERATURE, 120 + 5

degree F; TUMBLE DRY, PERMANENT PRESS."

PAGE 21: ADD THE FOLLOWING NEW PARAGRAPH:

"4.5.2 TOXICITY TEST. IF THE TOXICITY REQUIREMENT (SEE 3.10) CAN

BE DEMONSTRATED WITH HISTORICAL DATA, TOXICITY TESTING MAY NOT BE REQUIRED

(SEE 6.2). WHEN REQUIRED (SEE 6.2), AN ACUTE DERMAL IRRITATION STUDY AND

A SKIN SENSITIZATION STUDY SHALL BE CONDUCTED ON LABORATORY ANIMALS. WHEN

THE RESULTS OF THE STUDIES INDICATE THE BRAID IS NOT A SENSITIZER OR

IRRITANT, A REPEAT INSULT PATCH TEST SHALL BE PERFORMED IN ACCORDANCE WITH

THE MODIFIED DRAIZE PROCEDURE (SEE 2.2). "

PAGE 23, 6.2, ADD THE FOLLOWING:

"K. TOXICITY REQUIREMENTS (SEE 3.10 AND 4.5.2)."

(Ref. T1574)

ADDITIONAL INFORMATION FOR MIL-C-44296:

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER "AND" INSERT "STITCH-

REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN "TYPE X-CIRCULAR KNIT SUBSTRATE"

AND "CLASS 1" INSERT "TYPE X1- "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW "TYPE IX" ADD "TYPE X -

CIRCULAR KNIT SUBSTRATE"

PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD FOLLOWING NEW PARAGRAPH:

"2.1.3 OTHER PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A PART OF THIS

DOCUMENT TO THE EXTENT SPECIFIED HEREIN. UNLESS OTHERWISE SPECIFIED, THE

ISSUES OF THE DOCUMENTS WHICH ARE DOD ADOPTED SHALL BE THOSE LISTED IN THE

ISSUE OF THE DODISS SPECIFIED IN THE SOLICITATION. UNLESS OTHERWISE

SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT LISTED IN THE DODISS SHALL BE

THE ISSUES OF THE NONGOVERNMENT DOCUMENTS WHICH ARE CURRENT ON THE DATE OF

THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC 20

- FIBER ANALYSIS QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE ADDRESSED

TO AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC), P.O.

BOX 12215, TRIANGLE PARK, NC 27709-2215)"

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH: "3.1.2.10 TYPE X. TYPE X SHALL BE

A CIRCULAR KNIT. WHEN SPECIFIED (SEE 6.2), THE FACE SIDE SHALL BE

NAPPED."

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE FOLLOWING: "3.1.2.11 TYPE X1.

TYPE X1 SHALL BE STITCH- REINFORCED NONWOVEN WHEREBY A SERIES OF

CHAINSTITCHING IS SEWN IN THE MACHINE DIRECTION OF THE SUBSTRATE IN ORDER

TO REINFORCE THE NONWOVEN CONSTRUCTION."

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS. ADD THE FOLLOWING NEW TABLE

AFTER TABLE VII:

"TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

ADHESIVE) STRENGTH

OZ/SQ/YD. LBS. (MIN.

MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER."

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.: AFTER TABLE"V111" ADD NEW

TABLE 1X:

"TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

BREAKING STRENGTH

WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

FORCEMENT

A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE MULTIFILAMENT THREAD USING

CHAINSTITCH STITCH TYPE WITH CHAINSTITCH LOOPS ON FUSIBLE SIDE TO PROTECT

FROM UNRAVELING."

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

- LINE 2, DELETE "(EXCEPT CLASS 5)" AND SUBSTITUTE "(EXCEPT TYPE IX WHEN

USED AS FUSIBLE SEAM TAPE AND CLASS 5)".

- LINES 7 AND 8, DELETE "OR SHEETING MATERIAL".

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE "30" AND SUBSTITUTE "20". LINE 24,

DELETE "45" AND SUBSTITUTE "30".

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST METHOD COLUMN, LINES 2 AND

3 DELETE "1600" AND SUBSTITUTE "AATCC 20".

PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH PROCEDURE (INITIAL AND AFTER

LAUNDERING/DRY CLEANING). DELETE THE FIRST AND SECOND SENTENCES IN THEIR

ENTIRETY AND SUBSTITUTE: "CUT A 12 INCH WARP BY 11 INCH FILLING SAMPLE

FROM BOTH THE OUTERSHELL AND FUSIBLE MATERIALS SPECIFIED FOR CONTRACT USE

(SEE 6.5)."

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE FOLLOWING:

" E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS HIGH DEGREE

STRENGTH/STABILIZATION FOR TAPE AND STAY APPLICATION FOR LARGE OR SMALL

PART FUSIBLES AND IS INTENDED TO PROVIDE VERTICAL STABILITY AND ABRASION

RESISTANCE."

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE PROCEDURE. INSERT THE

FOLLOWING BETWEEN THE FIRST AND SECOND SENTENCES: "IN SOME CASES,

OUTERSHELL SAMPLES REPRESENTATIVE OF SEPARATE PRODUCTION LOTS MAY BE USED

TO DETERMINE IF DIFFERENT FINISHES MAY AFFECT BONDING STRENGTH."

(ref. T0998 - 5/23/06)

MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY

MARKING FOR SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA

TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF

C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO

BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE

STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WISCONSIN 53203

(Ref. T0795 - May 17, 2006)