Performance Work Statement.pdf

PERFORMANCE-BASED WORK STATEMENT (PWS)

CAACF FURNITURE AND EQUIPMENT

U.S AIR FORCE

309 MXSG

4/9/2025

CAACF Furniture and Equipment

TABLE OF CONTENTS

1 DESCRIPTION OF SERVICES

2 Scope

2.1 List of Furniture and equipment

2.2 Documentation and Drawings

1 DESCRIPTION OF SERVICES

This contract is seeking to acquire furniture and equipment for a new facility being built on Hill AFB. Estimated completion of constructing this facility is April 2026. Vendor will need to purchase and install furniture in the locations described in this document and illustrated in the attached drawings. Furniture and equipment will be for office spaces, conference room, break area, and industrial preparation area in this new facility.

Information Data Sheets provide salient characteristics, item identification, quantity, and color/finish information of all furniture and equipment. Manufacturers and products listed are for color, texture, and/or pattern reference only and are not intended to limit selection of similar finish materials by other manufacturers. Furnishings are to match in style and color throughout the facility and compliment the architectural finishes and design.

Criteria for furniture selection shall include function and ergonomic considerations, maintenance, durability, sustainability, comfort and cost. Finish materials will be selected for their suitability to the required use, ease of maintenance, and responsibility to the environment. Colors, patterns, and textures are incorporated which successfully mask minor abrasions and day-to-day soiling between cleaning. Materials selected will meet Class A finishes in accordance with NFPA 255.

See Room Finish Schedules drawing A-610 and Interior Finish Materials Legend drawing A-611. Furniture shall not be pre-wired due to security requirements.

2 SCOPE

2.1 List of Furniture and equipment

Code Description Count

A1 REFRIGERATOR / FREEZER 1

A2 COUNTERTOP MICROWAVE OVEN 1

B1 BOOKCASE 5 SHELF 1

B2 BOOKCASE 3 SHELF 1

C1 CONFERENCE CHAIR 10

C2 MID-BACK TASK CHAIR 18

C3 CONFERENCE SIDE CHAIR 6

D1 SECURITY D1 - SEE CONFIG. D1/I-201 4

D2 OPEN OFFICE D2 - SEE CONFIG. D2/I-201 8

D3 CONTROL DESK D3 - SEE CONFIG, D3/I-201 3

D4 VIDEO CONTROL DESK 1

D5 FOLD OUT SIGN-IN DESK 1

F1 5 DRAWER FILE CABINET 4

F2 3 DRAWER FILE / BOOKCASE CABINET 2

F3 5 DRAWER FILE CABINET 1

F4 2 DRAWER FILE/CABINET 2

Code Description Count

G3 4 DRAWER FLOOR SAFE 1

G6 1 DRAWER SAFE 2

M2 WHITE BOARD 5X4 3

M3 TACKBOARD 6X3 1

M4 WHITE BOARD 6X4 3

M6 PODIUM 1

M7 KEYBOARD TRAY WITH MOUSE PAD 20

M8 CPU UNDER DESK SUPPORT 20

M10 WASTE / RECYCLING BIN 2

M11 DINING SET WITH 6 CHAIRS 1

M12 DESK TRASH BIN 16

M13 LARGE TRASH BIN ON WHEELS 1

S1 STORAGE CABINET, SUPPLIES 1

S2 STORAGE CABINET, BAY 1

S3 CELL PHONE STORAGE LOCKER 1

S4 PERSONAL STORAGE LOCKER 4

S5 COPIER STORAGE CABINET 3

T1 LARGE CONFERENCE TABLE 12x4 1

2.2 Documentation and Drawings

2.2.1 Furniture Plans. Refer to drawing (DWG) I-101 and A-121 for location and placement of furniture and equipment.

2.2.2 Workstations and Freestanding Desk Typicals. Refer to DWG I-201.

2.2.3 Interior Material Legend. Refer to DWG A-610 thru 613.

2.2.4 Interior Structural Finish Color Boards. See Appendix A.

2.2.5 Updated FF&E Procurement Information Sheets. See Appendix B.

2.2.6 Desk Based Workstation Salient Features. See Appendix C.

2.2.7 Panel Based Workstation Salient Features. See Appendix D.

2.2.8 FF&E Color Board Finish Legend and Color Boards. See Appendix E.

UNCLASSIFED // FOR OFFICIAL USE ONLY

USACE AFCEC | HILL AIR FORCE BASE, UTAH

UNCLASSIFIED // FOR OFFICIAL USE ONLY

APPENDIX A. INTERIOR STRUCTURAL FINISH COLOR BOARDS

Structural Interior Finishes

COLOR CODE: CPT1

DESCRIPTION: CARPET TILE

COLOR CODE: CPT1

DESCRIPTION: BRICK ASHLAR

CARPET INSTALLATION

COLOR CODE: RAF1

DESCRIPTION: RAISED ACCESS

FLOOR CONDUCTIVE LAMINATE

COLOR CODE: ERF1/EB

DESCRIPTION: EPOXY RESIN

FLOORING/EPOXY COVE BASE

COLOR CODE: RB1

DESCRIPTION: RUBBER WALL

BASE

COLOR CODE: LAM1

DESCRIPTION: CASEWORK

LAMINATE

COLOR CODE: SS1

DESCRIPTION: SOLID SURFACE

COUNTERTOP

CA

AC

F

- H

IL

L

AF

B

- U

TA

H

C O

RR

EC

TE

D

F

IN

AL

UNCLASSIFIED - FOR OFFICIAL USE ONLY

COLOR CODE: ACT1

DESCRIPTION: ACOUSTIC

CEILING TILE

Structural Interior Finishes

COLOR CODE: EFM1

DESCRIPTION: ENTRANCE

FLOOR MAT

COLOR CODE: PFT1/PB1

DESCRIPTION: PORCELAIN

FLOOR TILE/PORCELAIN BASE

COLOR CODE: CWT2

DESCRIPTION: CERAMIC WALL

TILE ACCENT

COLOR CODE: PNT1

DESCRIPTION: PAINT (MAIN

WALL)

COLOR CODE: PNT2

DESCRIPTION: PAINT (ACCENT

WALL)

UNCLASSIFIED - FOR OFFICIAL USE ONLY

COLOR CODE: PNT3

DESCRIPTION: PAINT (ACCENT

WALL)

COLOR CODE: CG1

DESCRIPTION: CORNER GUARD

COLOR CODE: CWT1

DESCRIPTION: CERAMIC WALL

TILE

CA

AC

F

- H

IL

L

AF

B

- U

TA

H

C O

RR

EC

TE

D

F

IN

AL

COLOR CODE: PNT4

DESCRIPTION: PAINT (CEILING)

COLOR CODE: PNT5

DESCRIPTION: PAINT (DOOR/

TRIM)

DESCRIPTION: SIGNAGE

CONCEPT

COLOR CODE: IS1

DESCRIPTION: LAMINATE FACE

COLOR CODE: IS5

DESCRIPTION: ALUMINUM

COMPOSITE EXTERIOR SIGN PANEL

COLOR CODE: IS3

DESCRIPTION: METAL ACCENT

TRIM

COLOR CODE: IS2

DESCRIPTION: INSERT

BACKGROUND

Structural Interior Finishes

UNCLASSIFIED - FOR OFFICIAL USE ONLY

CA

AC

F

- H

IL

L

AF

B

- U

TA

H

C O

RR

EC

TE

D

F

UNCLASSIFIED // FOR OFFICIAL USE ONLY

APPENDIX B. UPDATED FF&E PROCUREMENT INFORMATION

SHEETS

COMPOSITE AIRCRAFT ANTENNA CALIBRATION FACILITY

HILL AFB, UTAH

FF&E PROCUREMENT INFORMATION

Item Description - Refrigerator / Freezer

Item Code: A1 Item Picture:

Manufacturer: Summit Appliance

Design Series: 11.5 cu ft Top Freezer Refrigerator

Model: FF1387SSIM

Dimensions: 24"Wx28.75"Dx38"H

Warranty: 1 year

Salient Characteristics:

Finish:

Stainless Steel Door, Grey powder coat cabinet

Location and Quantity:

Total Quantity: 1

GSA Contract:

Contract #: GS-21F-089BA

Contract Exp.: 5/31/2024

FSC Group: 51V

SIN: 105 002

LEED Application:

• ENERGY STAR Compliant

• 100% CFC free

Alternatives:

• General Electric / GTE16DTH

KITCHENETTE 158: 1

• Frigidaire / FFHI1826PS

• Stainless Steel Door Finish, Grey cabinet color

• Capacity: 11.5 cu. ft.

• Voltage 115/Frequency 60 Hz/Amps 1.4

• Kilowatt Hrs per Year 395

• Ice Maker factory installed

• Two Crispers Slide-out

• 3 Refrigerator Drawers

• 6 Refrigerator Door Bins

• Refrigerator and Freezer Interior Lights

• 3 Adjustable Refrigerator Glass Shelves

• Frost-free Defrost Freezer System

• 2 Freezer Door Bins

• 1 Freezer Glass Shelf

• Adjustable touch control thermostat Note - Finishes pictured may vary from item specified

FF&E PROCUREMENT INFORMATION

Item Description - Microwave

Item Code: A2 Item Picture:

Manufacturer: Summit Appliance

Design Series: Countertop Microwave

Model: SCM1000SS

Dimensions: 20.25"Wx14.75"Dx12.25"H

Warranty: 1 year

Salient Characteristics:

Finish:

Location and Quantity:

GSA Contract: SEVA Technical Services, DUNS 807941625

Contract #: GS-21F-089BA

Contract Exp.: 5/31/2024

FSC Group: 75

SIN: 75 200

LEED Application:

• N/A

Alternatives:

• General Electric / PVM9179S

Note - Finishes pictured may vary from item specified

• Frigidaire / FFCT127LS / 31EV61

KITCHENETTE 158 : 1

•.9 cu B. capacity

•Stainess Steel construcCon

•Cooking Power WaDage 1000

•Approved to NSF standards for use in foodservice industry

•Easy Time seEng with touch buDons and saved cook seEng

•OpConal Control Lock

•Digital display Cmer readout

•Voltage/Frequency: 115V AC/60 Hz

Stainless Steel

Total Quantity: 1

FF&E PROCUREMENT INFORMATION

Item Description - Bookcase

Item Code: B1 Item Picture:

Manufacturer: Herman Miller

Design Series: Meridian

Model: 46-4215-OB-68

Dimensions: 42W x 15D x 66H

Warranty: 12 years, 3 shifts

Salient Characteristics:

Paint

Finish:

Total Quantity: 1

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 10

LEED Application:

•Certifications: SCS Indoor Advantage™ certified for indoor air quality in North America

•LEED Contributions: Recycled content, regional materials, and low emitting materials

•Environmental Facts: 99% recyclable, contains 28% recycled content

Alternatives:

• Steelcase / Universal Series

• Freestanding storage cabinet has contemporary styling with a steel top, side panels, back panel, full bottom, and 4 adjustable shelves (5 high bookcase)

• Welded construction of minimum 22 ga steel components, reinforced with minimum 22 ga vertical steel upright side braces and horizontal back braces to minimize racking and misalignment.

• Standard 20 ga. steel top with 1" high flanged edges, welded in the corners with a 20 ga. steel reinforcing channel for support of top loads

• Back is finished to allow cabinet to be used in the open plan without wrapping with panels

• Base is 3"H and integral to cabinet, leveling glides on each corner adjust for uneven floors with 7/8" range, ganging hardware is supplied to add stability

• Steel Construction

• Optimized for binder storage on all shelves

• Easy to adjust shelves on 1 inch increments

Note - Finishes pictured may vary from item specified

Location and Quantity:

F22 CONTROL ROOM 166: 1

Paint MP1: Soft White (LU)

• Global / 9300 Series

GSA Contract:

FF&E PROCUREMENT INFORMATION

Item Description - Bookcase - 3 Shelf Item Code: B2 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

36W x 15D x 40H

Salient Characteristics:

Paint

Finish:

Total Quantity: 1

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

• Freestanding storage cabinet has contemporary styling with a steel top, side panels, back panel, full bottom, and 2 adjustable shelves (3 high bookcase)

• Welded construction of minimum 22 ga steel components, reinforced with minimum 22 ga vertical steel upright side braces and horizontal back braces to minimize racking and misalignment.

• Standard 20 ga. steel top with 1" high flanged edges, welded in the corners with a 20 ga. steel reinforcing channel for support of top loads

• Back is finished to allow cabinet to be used in the open plan without wrapping with panels

• Base is 3"H and integral to cabinet, leveling glides on each corner adjust for uneven floors with 7/8" range, ganging hardware is supplied to add stability

• Steel Construction

• Optimized for binder storage on all shelves

• Easy to adjust shelves on 1 inch increments

Note - Finishes pictured may vary from item specified

Location and Quantity:

B2 CONTROL ROOM 165: 1

Paint MP1: Soft White (LU)

GSA Contract:

FF&E PROCUREMENT INFORMATION

Item Description - Conference Chair

Item Code: C1 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Salient Characteristics:

Finish:

Location and Quantity:

GSA Contract:

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 18

LEED Application:

Alternatives:

• Steelcase Leap

• Global G20

• Certificates: MBDC Cradle to Cradle Certified-Silver, SCS Indoor Advantage™ for indoor air quality in North America, level™ 1 certified to BIFMA e3 standard

• LEED Contributions: Recycled content, regional materials, rapidly renewable materials, low emitting materials, sustainable purchasing and innovation in design

• Environmental Facts: 91% recyclable, 28% recycled content, Life cycle assessment completed, PVC-free and chrome-free, Standard leather is chromium-free

Total Quantity: 10

Office Star Products

9333E

28.0L X 29.5W (IN)

• Appearance of leather

• Seat height, arm height, back rest, and tilt control allows for customizable adjustments

• Padded seat and back

• Roller Wheel five-star base; with Hard casters

Note - Finishes pictured may vary from item specified

CONFERENCE RM 157: 10

Leather

FF&E PROCUREMENT INFORMATION

Item Description - Mid-Back Task Chair

Item Code: C2 Item Picture:

Manufacturer: Herman Miller

Design Series: Aeron

Model: AER1B23AW Seat &

Dimensions: 25.75"W x 24-25"D x 37.75-42/75H Back

Warranty: 12 years, 3 shifts

Salient Characteristics:

Base

Armpads

Finish:

Location and Quantity:

GSA Contract:

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 18

LEED Application:

Alternatives:

F22 CONTROL ROOM 166: 4; B2 CONTROL ROOM 165: 2;

Total Quantity: 18

• National Office Furniture / Mix-It Mix-It Mid-Back Task Chair

• Steelcase / Gesture

• Certificates: MBDC Cradle to Cradle Certified-Silver, SCS Indoor Advantage™ for indoor air quality in North America, level™ 2 certified to BIFMA e3 standard

• LEED Contributions: Recycled content, regional materials, rapidly renewable materials, low emitting materials, sustainable purchasing and innovation in design

• NF Environment Certified

Armpads: DVP Dark Mineral

• Upholstered seat, Mesh Back; adjustable 23-3/4" to 26-1/4"

• Seat includes a 1-1/2" seat depth adjustment; seat cushion has waterfall front edge; pan design provides stability without creating pressure points

• A pneumatic cylinder is used to accomplish seat height adjustment with a range of 5" from 16" to 21"

• Synco-tilt mechanism; ability to accommodate size of user

• Multi-position back lock; able to lock in upright position or set in a free floating position allowing user to recline

• Lumbar curve of the back is located between 6 and 10 inches above seat pan; adjustable height lumber is available

• Adjustable height and depth; independently pivoting T-arms

• Roller Wheel five-arm base constructed of plastic; casters are

3" diameter, glides are available. Hard Casters.

Note - Finishes pictured may vary from item specified

Finish: Seat/Back Upholstery F3: 8Z Pellicle, Mineral 23101

Frame / Base MP3: VPR Mineral /DVP Dark Mineral

Provided at each Desk: SECURITY OFFICE 156: 4; OPEN OFFICE 159: 6; SUPERVISOR 161: 2

Frame /

FF&E PROCUREMENT INFORMATION

Item Description - Conference Side Chair

Item Code: C3 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Salient Characteristics:

Finish:

Location and Quantity:

GSA Contract:

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 18

LEED Application:

Alternatives:

• Steelcase / Silq

• National Office Furniture / Essay

CONFERENCE ROOM 157: 6

Total Quantity: 6

•Certificates: SCS Indoor Advantage™ for indoor air quality in North America, level™ 2 certified to BIFMA e3 standard

•LEED Contributions: Recycled content, regional materials, rapidly renewable materials, low emitting materials, sustainable purchasing and innovation in design, Cradle to Cradle Silver

•Environmental Facts: Up to 99% recyclable, 23% recycled content, uses powder-coat paints, water-based adhesives and solvent-free processes

SHOPSOL

1010461 24.5W x 18.5D x38H

• Seat height, arm height, back rest, and tilt control allows for customizable adjustments

• Padded seat and back

• Roller Wheel five-star base; with Hard casters

Note - Finishes pictured may vary from item specified

Compliments conference table chairs (C1)

FF&E PROCUREMENT INFORMATION

Item Description - Workstation

Item Code: D1 Item Picture:

Manufacturer: Herman Miller

Design Series: Canvas Office

Model: See Typical D1 on Drawing I-201

Dimensions: 8'x6'

Warranty: 12 years, 3 shifts

Electronic Ballasts in Task Lighting 5 years

Finish:

Laminate Top PL1: Light Ash (LA)

Paint MP1: Soft White (LU)

Vertical Surface Fabric VSF1: Chain Linen (2V04)

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 11

• Certificates: MBDC Cradle to Cradle Certified-Silver, SCS Indoor Advantage™ for indoor air quality in North America

• Level™ 2 certified to BIFMA e3 standard, recycled content, PVC-free.

Alternatives:

• Steelcase / Answer / See Drawing I-201 for Configuration

• Allsteel / Terrace / See Drawing I-201 for Configuration

GSA Contract:

LEED Application:

Total Quantity: 4

Salient Characteristics:

1. GENERAL. A) Panel Based System with U-Shaped Desk with Return, 67"H tackable Panels with Fabric and markerboard surfaces as shown. B) Desks and accompanying storage shall be provided from a single manufacturer and style line. C) Structure shall be steel, steel legs, high pressure laminate tops with square edge. D) Furniture can be contemporary or transitional in style. E) Door and drawer pulls shall be integral. 2. CONFIGURATION AND

COMPONENTS: Staight Main Worksurface 30"Dx48"W, Return Worksurfaces 24"Dx72"W, Steel, painted, 72" partition mounted Flipper door Overhead Bin with Steel fronts, painted, recess beneath to accommodate shelf light, and 72" tackboard. Pedestal with box/box/file drawers, steel, integral pulls, Lateral File Pedestal with file/file drawers, steel, integral pulls. Accessories include: Pencil tray, Keyboard Tray M7, CPU mount M8. 3. DOCUMENTS: A) See

Desk-Based Workstation Salient Characteristics specification for detailed description and construction, B) See Drawing

I-201 for typical layout and storage configurations. All freestand storage are separate items. Demountable Partition

Walls are a separate specification item. 4. CABLE

MANAGEMENT: Provide cable management trays for under desktops that are standard to the desk system for field routing of cables; see Elect and Comm drawings. Worksurface include 1 1/2 cord drop for power access.

no pre-wiring Light under overhead bin

Note - Finishes pictured may vary from item specified

Location and Quantity:

SECURITY OFFICE 156: 4

PaintLaminate Panel Fabric

FF&E PROCUREMENT INFORMATION

Item Description - Workstation D2

Item Code: D2 Item Picture:

Manufacturer: Herman Miller

Design Series: Canvas Office

Model: See Typical D2 on Drawing I-201

Dimensions: 4'x6'

Warranty: 12 years, 3 shifts

Electronic Ballasts in Task Lighting 5 years

Finish:

Laminate Top PL1: Light Ash (LA)

Paint MP1: Soft White (LU)

Vertical Surface Fabric VSF1: Chain Linen (2V04)

Total Quantity: 8

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 11

•Certificates: MBDC Cradle to Cradle Certified-Silver, SCS Indoor Advantage™ for indoor air quality in North America

Alternatives:

• Steelcase / Answer / See Drawing I-201 for Configuration

• Allsteel / Terrace / See Drawing I-201 for Configuration

Salient Characteristics:

1. GENERAL. A) Panel Based System with single desk, 67"H

Tackable Panel with Fabric surfaces on the back of the desk to support overhead and 39"H side panels as shown. B) Desks and accompanying storage shall be provided from a single manufacturer and style line. C) Structure shall be steel, steel legs, high pressure laminate tops with square edge. D) Furniture can be contemporary or transitional in style. E) Door and drawer pulls shall be integral. 2. CONFIGURATION AND COMPONENTS:

Worksurface 30"Dx72"L, Steel, painted, partition mounted Flipper door Overhead Bin with Steel fronts, painted, recess beneath to acccommodate shelf light, and 72" tackboard. Pedestal Unit with file/file drawers, Steel, painted, Integral pulls. Accessories include:

Keyboard Tray M7, CPU mount M8. 3. DOCUMENTS: A) See

Panel-Based Workstation Salient Characteristics specification for detailed description and construction, B) See Drawing I-201 for typical layout and storage configurations. 4. CABLE

MANAGEMENT: Provide cable management trays for under desktops that are standard to the desk system for field routing of cables; see Elect and Comm drawings. Worksurface include 1 1/2 cord drop for power access. Power in base with 3 duplex receptacles. Panels to include wire mgmt zone separated from power in base. 8 wire 2+2 power system.

no pre-wiring Light under one of the overhead bin

Note - Finishes pictured may vary from item specified

Location and Quantity:

•Level™ 2 certified to BIFMA e3 standard, recycled content, PVC-free.

GSA Contract:

LEED Application:

OPEN OFFICE 159: 6; SUPERVISER 161: 2

Panel Fabric

Paint

Laminate

1273599343C Highlight

FF&E PROCUREMENT INFORMATION

Item Description - Control Desk D3

Item Code: D3 Item Picture:

Manufacturer: Herman Miller

Design Series: Renew/Canvas

Model: See Typical D3 on Drawing I-201

Dimensions: 30"x96-104"

Warranty: 12 years, 3 shifts

Finish:

Laminate Top PL1: Light Ash (LA)

Paint MP1: Metallic Silver (MS)

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 11

Alternatives:

• Eaton / See Drawing I-201 for Configuration

• Saraval Industries / See Drawing I-201 for Configuration

LEED Application:

• 100% recyclable

GSA Contract:

• GREENGUARD Certified

F22 CONTROL ROOM 166: 2

Total Quantity: 3

B2 CONTROL ROOM 165: 1

Salient Characteristics:

1. GENERAL. A) Desk Based System, L-shape control desk configuration. B) Desks and accompanying items shall be provided from a single manufacturer and style line. C)

Structure shall be steel, steel legs, high pressure laminate tops with square edge. D) Furniture can be contemporary or transitional in style. 2. CONFIGURATION AND COMPONENTS:

L-shaped unit with Sit-to-Stand Main Worksurfaces

30"Dx48"L, Corner Worksurface, Steel, painted, Accessories include: cable management, CPU mount M8, keyboard trays.

DOCUMENTS: A) See Desk-Based Workstation Salient

Characteristics specification for detailed description and construction, B) See Drawing I-201 for typical layout and storage configurations. 4. CABLE MANAGEMENT: Provide cable management that are standard to the desk system for field routing of cables; see Elect and Comm drawings.

Note - Finishes pictured may vary from item specified

Location and Quantity:

Paint

Laminate

FF&E PROCUREMENT INFORMATION

Item Description - Video Control Desk

Item Code: D4 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Salient Characteristics:

Finish:

Location and Quantity:

CONFERENCE ROOM 157: 1

Total Quantity: 1

GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

See Picture Insert

• Reversible L-shaped computer desk

• Side leg has adjustable shelf so that a desktop computer can be stored on bottom shelf.

• No pre-wiring

• Metal Base

• Laminate top - color of top to complement conference table and chairs

Note - Finishes pictured may vary from item specified

Choose finish to harmonize with conference room table and chairs

FF&E PROCUREMENT INFORMATION

Item Description - Sign-In Desk

Item Code: D5 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Salient Characteristics:

Finish:

Location and Quantity:

Entry Corridor 151: 1

Total Quantity: 1

GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

20Wx 15 1/4D x 16 3/8 H

• Folding Wall Mount Desk

• Writing Surface Slope 0 Degrees

• Finish Powder Coated

• Frame Gauge 20 ga

• Includes Mounting Hardware

• Door Gauge 18 ga

• Metal Base

Color not critical

FF&E PROCUREMENT INFORMATION

Item Description - Lateral File 5 drawer

Item Code: F1 Item Picture:

Manufacturer: Herman Miller

Design Series: Meridian Lateral File

Model: 26-3618-5F

Dimensions: 36W x 18D x 66H

Warranty: 12 years, 3 shifts

Salient Characteristics:

Finish:

Paint MP1: Soft White (LU)

Total Quantity: 4

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 10

LEED Application:

•Certifications: SCS Indoor Advantage™ certified for indoor air quality in North America

•LEED Contributions: Recycled content, regional materials, and low emitting materials

•Environmental Facts: 99% recyclable, contains 28% recycled content

Alternatives:

• Steelcase / Universal Series

• Global / 9300 Series

Lateral, Paint, with metal integral pulls

• 1"H top on units

• Lift-up door

• Central lock, keyed random: 9201 Polished Chrome

• One label holder per drawer: clear plastic

• Drawer body: black only

• Drawer suspensions: black only

• One hanging folder bar per drawer on 18"D units

• Two rails per drawer on 24"D units

• Finished back

• Four adjustable leveling glides

• Ganging hardware

• Welded construction of minimum 22 ga steel components, reinforced with minimum 22 ga vertical steel upright side braces and horizontal back braces to minimize racking and misalignment.

Note - Finishes pictured may vary from item specified

Location and Quantity:

GSA Contract:

SECURITY OFFICE 156: 2; OPEN OFFICE 159: 2

FF&E PROCUREMENT INFORMATION

Item Description - Lateral File/Bookcase Cabinet 3 drawer

Item Code: F2 Item Picture:

Manufacturer: Herman Miller

Design Series: Meridian Lateral File

Model: 26-3618-3N

Dimensions: 36W x 18D x 36H

Warranty: 12 years, 3 shifts

Salient Characteristics:

Finish:

Paint MP1: Soft White (LU)

Laminate File Surrounds PL1: Light Ash (LA)

Total Quantity: 2

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 10

LEED Application:

•Certifications: SCS Indoor Advantage™ certified for indoor air quality in North America

•LEED Contributions: Recycled content, regional materials, and low emitting materials

•Environmental Facts: 99% recyclable, contains 28% recycled content

Alternatives:

• Steelcase / Universal Series

• Global / 9300 Series

GSA Contract:

Lateral, Paint, with metal integral pulls

• 1"H top on units

• Central lock, keyed random: 9201 Polished Chrome

• One label holder per drawer: clear plastic

• Drawer body: black only

• Drawer suspensions: black only

• One hanging folder bar per drawer on 18"D units

• Two rails per drawer on 24"D units

• Finished back

• Four adjustable leveling glides

• Ganging hardware

• Welded construction of minimum 22 ga steel components, reinforced with minimum 22 ga vertical steel upright side braces and horizontal back braces to minimize racking and misalignment.

Note - Finishes pictured may vary from item specified

Location and Quantity:

SECURITY OFFICE 156: 2

Laminate

FF&E PROCUREMENT INFORMATION

Item Description - Lateral File Cabinet 5 drawer

Item Code: F3 Item Picture:

Manufacturer: Herman Miller

Design Series: Meridian Lateral File

Model: 26-4218-5F

Dimensions: 42W x 18D x 66H

Warranty: 12 years, 3 shifts

Salient Characteristics:

Finish:

Paint MP1: Soft White (LU)

Total Quantity: 1

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 10

LEED Application:

•Certifications: SCS Indoor Advantage™ certified for indoor air quality in North America

•LEED Contributions: Recycled content, regional materials, and low emitting materials

•Environmental Facts: 99% recyclable, contains 28% recycled content

Alternatives:

• Steelcase / Universal Series

• Global / 9300 Series

GSA Contract:

Lateral, Paint, with metal integral pulls

• 1"H top on units

• Lift-up door

• Central lock, keyed random: 9201 Polished Chrome

• One label holder per drawer: clear plastic

• Drawer body: black only

• Drawer suspensions: black only

• One hanging folder bar per drawer on 18"D units

• Two rails per drawer on 24"D units

• Finished back

• Four adjustable leveling glides

• Ganging hardware

• Welded construction of minimum 22 ga steel components, reinforced with minimum 22 ga vertical steel upright side braces and horizontal back braces to minimize racking and misalignment.

Location and Quantity:

F22 Control Room166: 1

FF&E PROCUREMENT INFORMATION

Item Description - Lateral File Cabinet 2 drawer

Item Code: F4 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

36W x 18D x 28H

Salient Characteristics:

Finish:

Total Quantity: 2

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

GSA Contract:

Lateral, Paint, with metal integral pulls

• 2-Drawer High Lateral File.

• Central lock, keyed random

• Effort will be made to choose color and finish to complement the furniture in the supervisors office space.

Location and Quantity:

Supervisor Room161: 2

Picture shows the type of filing cabinet that is wanted. Color and Finish should harmonize with the furniture in the Supervisor's Office.

FF&E PROCUREMENT INFORMATION

Item Description - 4-Drawer Safe Item Code: G3 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Salient Characteristics:

Finish:

Location and Quantity:

Security Room 156: 1 B

Total Quantity: 1 GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

20-7/8W x 28D x 58-1/2H

• GSA Approved Class 5 or higher

• 4 drawers

• Each drawer has approved spin lock

FF&E PROCUREMENT INFORMATION

Item Description - 1-Drawer Safe Item Code: G6 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Salient Characteristics:

Finish:

Location and Quantity:

F22 Control Room 166: 1

B2 Control Room 165: 1 Total Quantity: 2 GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

15-1/2W x 17-1/8D x 12-3/8H

• GSA Approved Class 5 or higher

FF&E PROCUREMENT INFORMATION

Item Description - White Board

Item Code: M2 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Herman Miller

Glass White Board

Y7232.S4860

5'Wx4'H

12 years, 3 shifts

Salient Characteristics:

Finish:

Location and Quantity:

GSA Contract:

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 20

LEED Application:

Alternatives:

• GREENGUARD certified

• Egan Visual / MER4848

• Best-Rite / 202AD

• Shall live in Herman Miller’s collaborative furniture solutions portfolio.

• Shall offer a writable surface for both shared or private spaces.

• Shall attach to architectural walls.

• Shall feature two attachment options: rear hanger bracket and edge grip clip.

• Shall be available in six sizes.

• Shall offer a magnetic and non-magnetic option.

• Shall feature a 12-year warranty.

• Mounting height shall be 7'-0" from finished floor to top of the display board frame.

Note - Finishes pictured may vary from item specified

White

Supervisor 161: 1 Security Office 156:1 B2 Control Room 165: 1 Total Quantity: 3

FF&E PROCUREMENT INFORMATION

Item Description - Tack Board-Aluminum Frame

Item Code: M3 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Tack Board-Aluminum Frame

6''Wx3'H

Salient Characteristics:

Finish:

Location and Quantity:

GSA Contract:

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 20

LEED Application:

Alternatives:

•GREENGUARD certified

• Claridge / 48x36 Tackboard

• Ghent / VFVRT44-42

• Tan Nucork tackboard surface

• Angle Clip hangers

• Satin Anodized Aluminum Frame 5/8" mitered

• Mounting height shall be 7'-0" from finished floor to top of the display board frame.

Note - Finishes pictured may vary from item specified

Tan Cork with Satin Anodized aluminum frame

KITCHENETTE 158: 1

Total Quantity: 1

FF&E PROCUREMENT INFORMATION

Item Description - White Board

Item Code: M4 Item Picture:

Manufacturer: Herman Miller

Design Series: Glass White board

Model: Y7232.S4872

Dimensions: 6'Wx4'H

Warranty: 12 years, 3 shifts

Salient Characteristics:

Finish:

Location and Quantity:

GSA Contract:

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 20

LEED Application:

Alternatives:

• GREENGUARD certified

• Egan Visual / MER4848

• Best-Rite / 202AD

• Shall live in Herman Miller’s collaborative furniture solutions portfolio.

• Shall offer a writable surface for both shared or private spaces.

• Shall attach to architectural walls.

• Shall feature two attachment options: rear hanger bracket and edge grip clip.

• Shall be available in six sizes.

• Shall offer a magnetic and non-magnetic option.

• Shall feature a 12-year warranty.

• Mounting height shall be 7'-0" from finished floor to top of the display board frame.

Note - Finishes pictured may vary from item specified

White

CONFERENCE ROOM 157: 1

F22 CONTROL ROOM 166: 1

Open Office Room 159: 1

Total Quantity: 3

FF&E PROCUREMENT INFORMATION

Item Description - Podium

Item Code: M6 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

13.15"D x 23"W x 46.25"H

Salient Characteristics:

Finish:

Location and Quantity:

CONFERENCE ROOM 157: 1

Total Quantity: 1

GSA Contract:

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 1

LEED Application:

Alternatives:

• HON / Tercero Collection / Adjustable Ht Podium

• Global / Zira

• Table Top HPL (high pressure) Laminate has wood grain finish

• No pre-wiring

Note - Finishes pictured may vary from item specified

Coordinate finish color with podium.

• SCS Indoor Advantage Gold™ and BIFMA level™1 certified

FF&E PROCUREMENT INFORMATION

Item Description - Keyboard Tray

Item Code: M7 Item Picture:

Manufacturer: Herman Miller

Design Series: Keyboard Platform and mouse tray

Model:

Dimensions: 27W x 10D

Warranty: 12 years, 3 shifts

Salient Characteristics:

Finish:

Location and Quantity:

Total Quantity: 20 GSA Contract:

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 1

LEED Application:

Alternatives:

Y7737.1A

• 6.4" of height adjustment.

• 15° negaCve Clt and 10° posiCve Clt.

• FricCon adjustment knob.

• 11.9" of travel on a 17" base frame, 17" track.

• Teflon Glide.

•Refer to panel based workstation salient features

Note - Finishes pictured may vary from item specified

Standard

To be Included with D1 (4), D2 (8), D3 (8)

N/A

• Steelcase / Stela

• Humanscale / 6G Combo platform

FF&E PROCUREMENT INFORMATION

Item Description - CPU Support

Item Code: M8 Item Picture:

Manufacturer: Herman Miller

Design Series: CPU Holder

Model: Y7815.

Warranty: 12 years, 3 shifts

Salient Characteristics:

Finish:

Location and Quantity:

Total Quantity: 20 GSA Contract:

Contract #: GS-03F-036DA

Contract Exp.: 12/20/2020

FSC Group: 71

SIN: 711 1

LEED Application:

Alternatives:

• Using slide-and-rotate kit, support can be easily moved back and forth for increased leg space

• Mounts under a surface and holds a CPU in a vertical or horizontal position.

• Slides out 11-1/2" and swivels 360 degrees for easy access to connections.

• Holds CPU of up to 75 pounds and a maximum outside dimension of 64".

Note - Finishes pictured may vary from item specified

Standard, Black

N/A

• Humanscale / CPU600

• Steelcase / Vertical locking

17.75" Length: D1 (4), D2 (8)

5" Length: D3 (8)

FF&E PROCUREMENT INFORMATION

Item Description - Recycling / Trash Cans

Item Code: M10 Item Picture:

Manufacturer: Magnuson Group

Design Series: TRADA

Model: STEP

Dimensions: 14.5Dx18.3125Wx30H

Warranty: 5 years

Salient Characteristics:

Finish:

Location and Quantity:

Total Quantity: 2

GSA Contract:

Contract #: GS-07F-0308W

Contract Exp.: 3/14/2025

FSC Group: 73

SIN: 384 2

LEED Application:

Alternatives:

Body Paint Finish Color PT1: Britebond Silver

• Waste Wise Products LLC / Boxina Bin

• Trash Cans Warehouse / Edge Recycling & Waste Station

Note - Finishes pictured may vary from item specified

• 24 gallon painted steel waste receptacle

• Step mechanism with soft close lid

• Internal Liner and bag ring

• Closed top, adjustable glides

• Waste/Recyling Logo, top and step are painted the same color

• Liner capacity 16 gallons

OPEN OFFICE 159: 2 (1 each for Waste and Recycling)

• SCS Indoor Advantage Gold™

Logo, Top & Step Finish Paint Color PT2: Marine Blue

Logos: Waste / Recycling

• Locally sourced materials, 36.6% recycled content, 98% post life recyclability

Body

Logo/Top/Step

FF&E PROCUREMENT INFORMATION

Item Description - Dining Set, 6 Chiars Item Code: M11 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

KFI Studios Dailey 840031923097

Salient Characteristics:

Finish:

Location and Quantity:

Open Office 159: 1

Total Quantities: 1 GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

• Dining Table o 6'x3' o 12-gauge steel frame o Laminate top o rolling casters

• Dining Chair o set contains 6 chairs o 12-gauge steel frame o polypropylene flex-back vented seats o Chairs are made with rolling casters o Weight capacity to support 300 lb

Table laminate Natural, chairs Navy.

FF&E PROCUREMENT INFORMATION

Item Description - Desk Trash Ben Item Code: M12 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

USPU

S-9970BE

28Qt

Salient Characteristics:

Finish:

Location and Quantity:

Open Office 159: 6; Supervisor 161: 2; Conference Room 157: 1; Security Office 156: 4; F22 Control Room 166: 2; B2 Control Room 165: 1 Total Quantities: 16 GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

• Molded Plastic

Neutral color to be compatible with open office desks in color and finish.

FF&E PROCUREMENT INFORMATION

Item Description - Large Trash Bin Item Code: M13 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

RUBBERMAID COMMERCIAL PRODUCTS

FJSB1971944

32 Gal

Salient Characteristics:

Finish:

Location and Quantity:

Prep Bay 164: 1

Total Quantities: 1 GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

• Plastic with lid

• dolly wheel base for mobility

FF&E PROCUREMENT INFORMATION

Item Description - Storage Cabinet

Item Code: S1 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

LORELL

LLR34412

36Wx24Dx72H

Salient Characteristics:

Finish:

Coordinate finish and color with furniture in open office area.

Location and Quantity:

Total Quantity: 1

GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

Open Office 159: 1

• Steel construction powder-coat finish,

• 4 Adjustable shelves

• Locking door with key

FF&E PROCUREMENT INFORMATION

Item Description - Storage Cabinet

Item Code: S2 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Durham

HDC-244878-4S95

48Wx24Dx78H

Salient Characteristics:

Finish:

Color and finish not critical

Location and Quantity:

Total Quantity: 1

GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

Prep Area 164: 1

• 12 gauge Steel

• Locking doors

• Adjustable Shelves

FF&E PROCUREMENT INFORMATION

Item Description - Cell Phone Storage Locker

Item Code: S3 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

UNITED VISUAL PRODUCTS

UVLOC16B-Bik-Hsp 22"W X 16"D X 26"H

Salient Characteristics:

Finish:

Color and finish not critical

Location and Quantity:

Total Quantity: 1

GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

Prep Area 164: 1

• 15 to 20 units

• 12 to 22 gauge steel frame

• Doors can be Aluminum or polycarbonate

• Ability to be secured with padlock on each unit

• Unit opening should be at least Width 6-1/2 In., Depth 8 In., Height 5-1/2 In

• Wall mountable

• Powder coat finish

Note - actual item may be different than object displayed

FF&E PROCUREMENT INFORMATION

Item Description - Personal Storage Locker

Item Code: S4 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Hallowell

U3888-1PT

54"W x 18"D x 78"H

Salient Characteristics:

Finish:

Color and finish not critical

Location and Quantity:

Total Quantity: 4 GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

Prep Area 164: 4

• 3 units

• steel frame

• Vented

• Ability to be secured with padlock on each unit

• Powder coat finish

FF&E PROCUREMENT INFORMATION

Item Description - Copier Storage Cabinet

Item Code: S5 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

ALERA

ALECME4218BK

36W X 18D X 42H

Salient Characteristics:

Finish:

Color and finish complement with other open office and security office furniture.

Location and Quantity:

GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

Security Room 156: 2 Open Office 159: 1 Total Quantity: 3

• Industrial grade steel with powder coat finish and polished chrome handle

• Secure front doors

• 2 adjustable shelves

• Front doors open 180°

FF&E PROCUREMENT INFORMATION

Item Description - Large Conference Table

Item Code: T1 Item Picture:

Manufacturer:

Design Series:

Model:

Dimensions:

Warranty:

Salient Characteristics:

Finish:

Coordinate finish color with podium.

Location and Quantity:

CONFERENCE ROOM 157: 1

Total Quantity: 1

GSA Contract:

Contract #:

Contract Exp.:

FSC Group:

SIN:

LEED Application:

Alternatives:

• Table Top HPL (high pressure) Laminate has wood grain finish

• Shape may be rectangular, boat, or oval

• Data port opening in the middle

• No pre-wiring

48"Wx144"LX30"H

APPENDIX C. DESK BASED WORKSTATION SALIENT FEATURES

UNCLASSIFIED // FOR OFFICIAL USE ONLY

GENERAL DESCRIPTION:

A usable system of workstations composed of desk supported work surfaces and components, and freestanding storage units, supporting components, and accessories. The desk- based workstations shall include, but not limited to, worksurfaces, storage pedestals, shelving, and overhead storage units.

The desk-based workstations shall include all necessary connectors, support arms and end panels, and other hardware necessary to form a complete and useable configuration as shown on the drawings.

Drawer and door pull style and configuration shall match throughout each workstation.

The desk-based workstations shall match the style/model specified. Construction shall be a combination of metal, laminate, melamine, and / or wood veneer components as described below and specified. Specific requirements and salient characteristics are as follows:

WORKSURFACES:

• Worksurfaces shall include those surfaces configured and utilized as desks, return units, conference table units, and credenzas.

Dimensions:

• Width and depth shall vary no more than +/- 1 inch from the worksurface dimensions shown on the drawings.

• Nominal thickness from 1 inch to 1-3/4”.

Construction:

• Worksurfaces shall have laminate, melamine or wood veneer top surface, particleboard core, and backer sheet on the bottom surface.

• Worksurface thickness shall be not less than 1 inch.

• Veneer surface must be flat cut and booked matched on all worksurfaces.

Finish:

• All work surfaces require a durable polyurethane finish. The top of the worksurface shall be completely sealed to allow complete protection from humidity or accidental liquid penetration.

• All edges shall be finished with an edgebanding. Edgebanding color shall match the worksurface material.

• Grommets shall be provided shall be of sufficient size and shape to accommodate a minimum of 3 cords to include the threading of the cord plugs through the grommet.

• Desk Worksurface: Provide two grommets, one each at the front and back of the worksurface.

• Desk Return: Provide one grommet center on the back edge of the worksurface.

• Credenza: Provide two grommets, one each at the back corners of the worksurface.

• Conference Table Units: Provide grommets as indicated on drawings and furniture data sheets.

Connection System:

• Abutting worksurfaces shall mate closely and be at equal heights when used inside by side configurations in order to provide a continuous and level worksurface.

UNCLASSIFIED // FOR OFFICIAL USE ONLY

• The underside of the worksurface shall be pre-drilled with threaded, metal inserts for metal-to-metal connection for cantilevers and under worksurface storage units.

• Worksurfaces shall be supported by a combination of end panels, back panels, storage pedestals, fixed or adjustable height leg posts, or storage file units.

SUPPORT:

• Worksurface supports shall consist of metal legs.

• Each leg shall include 2 worksurface-to-end panel discs, 2 levelers, and shoulder screws.

• Legs shall be mounted to the underside of the worksurface and flush with the worksurface edge.

• Dimensions: See furniture data sheets.

Configurations:

• Back panels shall be half-height to allow for access to wall electrical and data/comm.

connectivity.

• End panels shall be L-shaped and extend from the underside of the worksurface to the floor.

Construction:

• All support panels shall be steel construction with minimum steel gauge of:

End units: Outer skin: 21-gauge, Inner skin: 20-gauge.

Back panels: Outer skin: 22-gauge, Mounting brace: 16-gauge.

Finish:

• All component surfaces shall be a factory baked enamel finish.

UNCLASSIFIED // FOR OFFICIAL USE ONLY

APPENDIX D. PANEL BASED WORKSTATION SALIENT

FEATURES

UNCLASSIFIED // FOR OFFICIAL USE ONLY

General Description:

A usable system of workstations composed of monolithic panels, panel supported work surfaces and components, storage units, supporting components, electrical hardware, special electrical and communication features, and accessories. The panel based workstations shall include interconnecting panels which shall support cantilevered components including, but not limited to, worksurfaces, shelving, and overhead storage, and pedestal storage units. The panel based workstations shall include all necessary connectors, trim, support arms, and other hardware necessary to form a complete and useable configuration as shown on the drawings. Drawer and door pull style and configuration shall match throughout each workstation.

Specific requirements and salient characteristics are as follows:

PANELS

Dimensions:

• Panel width and height shall vary no more than +/- 1 inch from the dimensions shown on the drawings.

• Powered and non-powered panels shall be compatible in height.

• Minimum thickness for all panels shall be 2-1/2 inches with a maximum of 3 inches.

Panel Surface:

• Shall be plastic laminate surface to be of a thickness to qualify as a general purpose grade in accordance with NEMA LD 3 classification.

• Laminate skins consist of a laminate surface captured by a painted metal trim border on all sides and attached to frames to finish panel appearance.

• Tackboard panels shall be fabric-wrapped and recessed within the frame to protect exposed edges and be a seamless width of fabric stretched over the entire face of the panel.

• The fabric shall be attached securely and continuously along the entire perimeter of the panel and shall allow for easy removal and replacement in the field.

Frame:

• Panel frames shall include a finished top cap and panel end caps.

• Top cap shall be continuous to maximum lengths available along entire panel series.

• All exposed panel vertical ends shall be capped.

• Panel frame, trim, base raceway, and other painted parts shall have a factory baked enamel or epoxy powder finish.

Base Raceway:

• Raceways shall be an integral part of all panels.

• Exposed surfaces and covers shall match the frame finish color.

• Panels, whether powered or non-powered, shall be provided with a base raceway and base raceway cover on each side of the panel.

• Base covers shall utilize a non-magnetic, snap-on panel frame connection system.

• Panel system shall be capable of being configured with a beltline raceway or a design which supports the location of recessed outlet modules at beltline or other panel face locations.

UNCLASSIFIED // FOR OFFICIAL USE ONLY

• Bases over 24 inches in width shall have a minimum of 4 knockouts (doors) per side, two designated for electrical receptacles and two designated for data/communication receptacles.

• Base raceway shall include an internal non-conductive divider or other means to physically separate and isolate electrical wiring from communication/data wiring.

Panel Base Leveling Glides:

• On panel-to-panel products, each panel shall have 2 leveling glides.

• On panel-to-post products each connector shall contain a leveling glide.

• A minimum 3/4-inch adjustment range is required for both panel-to-panel and panel-to-post systems.

Panel Connection System:

• The panel system shall have connectors which accommodate a variety of panel configurations as shown on the drawings to include: A straight line connection of 2 panels (180 degrees), Cross connection of 4 panels (all 90 degrees), Corner connection of 2 panels (90 degrees), T connection of 3 panels (90 degrees),

• The panel connector system shall provide tight connections with continuous visual and acoustical seals.

• The connector system shall allow removal of a single panel within a typical workstation configuration, without requiring disassembly of the workstation or removal of adjacent panels.

• The connector system shall provide for connection of panels of similar or dissimilar heights.

• Right angle (90 degree) connections between panels shall not interfere with the capability to hang work surfaces and other components on any adjacent panel.

• Where a 90 degree, 120 degree or "T" connection is used, a panel filler must be used if a void is created so that the panel system has a continuous look and smooth finish.

• Panel connection to panel shall be steel to steel.

WORKSURFACES

Dimensions:

• Width and depth shall vary no more than +/- 1 inch from the worksurface dimensions shown on the drawings.

• Nominal thickness from 1 inch to 1-3/4 inches.

Construction:

• Worksurfaces shall have a laminate finished top surface, particleboard core, and backer sheet on the bottom surface.

• Plastic laminate shall be of a thickness to qualify as a general purpose grade in accordance with NEMA LD 3 classification.

• All edges shall be finished with a laminate post formed edge or a minimum 2mm thick solid vinyl edgebanding. Edgebanding color shall match the laminate worksurface pattern and color.

• Cord access shall be provided along the entire back edge of the worksurfaces. Grommets shall be provided and be of sufficient size and shape to accommodate a minimum of 3 cords to include the threading of the cord plugs throughout the grommet.

UNCLASSIFIED // FOR OFFICIAL USE ONLY

STORAGE PEDESTALS

Dimensions:

• Width and depth shall vary no more than +/- 1 inch from the pedestal dimensions shown on the drawings.

• Unit depth shall provide pedestal to be fully recessed under the worksurface with the pedestal face flush with the front edge of the worksurface.

Configurations/Features:

• Drawer configuration shall be either box/box/ file or file/file/ as indicated on the drawings.

• Box drawers shall be provided with pencil trays and a minimum of one divider.

• File drawers shall have integral hangers or hangers shall be supplied as an accessory, field installed, to support hanging files.

• All units shall be lockable and have the capability to be "keyed alike" for each workstation location.

Construction:

• Pedestals shall be floor mounted or mobile, on casters, as indicated on the drawings.

• Pedestal case and drawers shall be of welded minimum 20-gauge steel construction

• Minimum 18-gauge steel drawer faces shall be securely attached to the drawer front.

Drawers:

• All file drawers shall have full extension ball bearing suspension glides.

• All box drawers shall have 3/4 extension glides.

• All units shall be counter-weighted and gang locked.

Finish:

• All component surfaces shall be a factory baked enamel finish.

FLIPPER DOOR STORAGE

• Flipper door storage cabinets shall be panel hung and supported.

• Underside of flipper door cabinet shelf shall accommodate task lighting in locations as noted on the drawings.

• Overhead flipper door storage cabinet units shall incorporate a steel shelf and two end panels, together with a top and front unit, to provide a closed, lockable cabinet.

• Flipper doors shall open only over the top of the storage unit to maximize interior space and prohibit storage on top of the unit.

• Flipper door cabinets shall be provided with locks.

• Each unit shall include a minimum of two shelf dividers specifically designed and engineered for the storage unit.

Construction:

• The shelf pan shall be of a minimum 18-gauge metal construction with formed edges.

• Shelf supporting end panels shall be constructed of minimum 16-gauge metal.

• Flipper doors shall be constructed of metal with formed edges.

UNCLASSIFIED // FOR OFFICIAL USE ONLY

• Doors shall utilize either a ball bearing or rack and pinion suspension system.

Dimensions:

• Overhead storage with flipper door units width shall vary no more than +/- 1 inch from the dimensions shown on the drawings.

• Units of 60 inches or wider shall include two doors per unit.

• Minimum depth shall be 12-3/8 inches or the depth shall accommodate standard 3-ring

• Binders with the flipper door in the closed position.

• Minimum height shall support the accommodation of 3-ring binders with the flipper door in the open…