Performance Work Statement (Crane).pdf
PDF 119 KB Posted
- Attached to
- Sources Sought ONSITE CRANE and FREIGHT SERVICES of TWO CALIBRATION VAN MOUNTED on TRAILERS
- Solicitation number
- PANRSA240000007900
About this file
This document is a Performance Work Statement (PWS) that describes the requirements for onsite crane and freight relocation services for two calibration vans mounted on trailers. The U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) requires a contractor to provide a hydraulic truck crane, semi-trucks, and low-boy trailers to move the calibration vans from the TSC Sacramento, CA facility to the Defense Logistics Agency (DLA) location in Tracy, CA. The contractor shall be responsible for loading, transporting, and unloading the vans, which have an estimated weight of 75,000 lbs each. The government will be responsible for verifying the vans and coordinating with the DLA point of contact. The period of performance and quality requirements are not specified in the PWS. The contractor must comply with installation access and security requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| More Information About Requirement.pdf | ||
| More Information About Requirement (1).pdf | ||
| More Information About Requirement.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
USATA NG-0008-24
Attachment 01
PERFORMANCE WORK STATEMENT (PWS)
ONSITE CRANE and FREIGHT SERVICES of TWO CALIBRATION VAN MOUNTED on TRAILERS
1.0 GENERAL. The U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) has a requirement to acquire commercial services for an onsite crane and freight relocation services for two (2) calibration vans mounted on trailers from TSC Sacramento, CA to Defense Logistics Agency (DLA) Located in Tracy, CA
2.0 CONTRACTOR TASKS.
2.1 The contractor shall provide a one (1) hydraulic truck crane capable of loading (110 Tons) along with two (2) Semi Trucks and two (2) Low Boy trailers and if required Heavy weight escorts to move the mounted calibration vans with trailers from TSC Sacramento, CA to DLA Disposition Services-San Joaquin 25600 Chrisman Rd. Bldg.
22 Tracy, CA 95305 or DLA’s desired location within a ten (10) mile radius from the stated bldg.
2.2 The details of the two (2) calibration vans mounted on trailers are as follow for each:
• Boom Length: 90ft.
• Load to Lift: 75,000 lbs. (estimate)
• Radius to Lift: 50ft (estimate)
• Each trailer is 38,000 lbs. (estimate)
• 2 EA Semi Trucks to pull the lowboy trailers.
• Set on and secure items on 2 EA lowboy trailers.
• Haul TSC Sacramento, CA to DLA in Tracy, CA upload and offload.
3.0 GOVERNMENT TASKS.
3.1 The government shall be responsible for verifying the right calibration vans mounted on trailers are being shipped from a USATA facility from origin TSC Sacramento to DLA in Tracy, CA along with coordinating with a DLA point of contact to handle all logistics at the DLA location once the trailers have arrived.
3.2 The U.S. Army TMDE Activity, Redstone Arsenal, AL (Acceptance DODAAC:
W80RA6) shall be responsible for the receiving, inspection and acceptance requirements of DFAS Wide Area Workflow (WAWF) for all units. Contractor is authorized to invoice services in WAWF once completed.
3.3 Subject to applicable security regulations, the Government shall provide the Contractor access to the trailers to perform the crane and freight services.
USATA NG-0008-24
Attachment 01
4.0 PLACE OF PERFORMANCE. Performance shall take place at government facility located at TSC SACARMENTO inside B.T. Collins Army Reserve Center: 6300 Midway Street Sacramento, CA 95828 and at DLA specified turn-in location in Tracy, CA.
5.0 PERIOD OF PERFORMANCE. The period of performance shall be as specified in Section B of the contract.
6.0 QUALITY REQUIREMENTS. Not applicable.
7.0 GOVERNMENT-FURNISHED EQUIPMENT. None.
8.0 ACCESS AND GENERAL PROTECTION/SECURITY POLICY AND
PROCEDURES.
This standard language is for contractor employees with an area of performance within an Army controlled installation, facility, or area. Contractor and all associated subcontractors’ employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DoD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.
9.0 FOR CONTRACTORS THAT DO NOT REQUIRE A CAC BUT REQUIRE ACCESS
TO A DOD FACILITY OR INSTALLATION.
Contractor and all associated subcontractor employees shall comply with adjudication standards and processes using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05/AR 190-13), applicable installation, facility and area commander installation/ facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.
File details come from the government source that posted it. Updated .