Penobscot Bay SOW.docx
DOCX document 30 KB Posted
- Solicitation number
- 70Z04024Q61155Y00
About this file
This document is a Statement of Work (SOW) for a federal contract opportunity related to providing on-site technical representative services for strain gage alignment and vibration measurements on the USCGC Penobscot Bay located in Baltimore, MD.
The SOW requires the contractor to install strain gages, measure vertical and horizontal bearing reactions on the main propulsion shaft, and conduct a roving vibration survey of the vessel while underway. The contractor must have extensive experience with the alignment and vibration characteristics of this vessel class. The work is scheduled for on or around August 15, 2024, and the government will provide access, rigging support, and other assistance as needed. The related federal contract opportunity is solicitation number 70Z04024Q61155Y00, a firm fixed-price purchase order to be awarded on a lowest priced, technically acceptable basis. Quotes are due by July 22, 2024 at 12:00 PM Eastern and should be emailed to the Contracting Officer.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FAR Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work Penobscot Bay Tech Rep Services for Strain Gage Alignment & Vibration Measurements
PR# 2124404Y6174M98006
SCOPE
Contractor shall provide on-site tech rep services for the USCGC Penobscot Bay located in Baltimore Md USCGY 2401 Hawkins Point Rd 21226. Scheduled on or about. 08/15/24. POC: Mr. James, Johnston
Contractor must accomplish the following tasks: Strain Gage Alignment & Vibration Measurements.
Tech must have extensive experience and historical data pertaining to both the alignment and vibration characteristics of this vessel and others of this class.
Work Scope:
Strain Gage Alignment Measurements
Tech to install the necessary strain gages and measure the vertical and horizontal bearing reactions on the main propulsion shaft. The results of measurements will be compared to historical alignment data for this vessel and if required, recommendations for corrective actions will be provided by the contractor.
Vibration Measurements.
Yard proposes that a roving vibration survey of the vessel be conducted with the vessel underway. Yard would also like measurements taken at (4) locations and record vibration data during slow runups from handle position 1 – 10, to capture vibration data over the entire shaft speed range of the vessel. Upon completion of the measurements, the data will be analyzed, and a condition found report will be submitted within (1) week of the sea trial.
Ship / Yard Assistance Required:
Provide access to shafting and remove interferences as required.
Yard required to provide rigging support to rotate shaft.
File details come from the government source that posted it. Updated .