PD_E9AR106-001_02978_B.pdf
PDF 328 KB Posted
- Attached to
- Cooler, Lubricating
- Solicitation number
- SPRDL1-25-R-0192
About this file
This is a Special Packaging Instruction form (DD Form 2169) that specifies detailed packaging requirements for an Engine Oil Cooler Assembly, Left Hand (part number E9AR106-001, CAGE 02978, National Stock Number 2930-01-424-6731). The form is dated 25 AUG 2025, Revision B, with SPI number AK14246731. The unit pack weight is 85.2 pounds with dimensions of 35.5 x 20.9 x 10.1 inches and a cubic footage of 4.336 cubic feet. Quantity per unit pack is 1 each.
The packaging instructions require a multi-step preservation and packing process following MIL-STD-2073-1, Method 32. Preservation includes sealing all openings with NAS847 caps/plugs and applying a single wrap (MIL-PRF-121, Type II) to the end of the oil cooler. Packing requires blocking and bracing per MIL-STD-1186, cushioning material (ASTM-D4727, Type CF), and placement in an ASTM D5118 container. The item must be placed in an MIL-DTL-117 Type III bag, wrapped with A-A-3174 material, and finally placed in an ASTM D6880 wooden container (all 1-inch nominal lumber with beveled skids). Container closure must comply with ASTM-D1974, and overwrap must be secured with ASTM-D5486. Quality assurance provisions require inspection of preservation and unit pack per MIL-STD-2073-1 and packing inspection per MIL-STD-1186 and applicable container specifications. Marking must follow MIL-STD-129.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL125R0192.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
0BSPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BM
MT
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
E9AR106-001 (02978) ENGINE OIL COOLER ASSY, LH 19207 AK14246731
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2930-01-424-6731 25 AUG 2025 B
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 85.2
4.336 35.5 X 20.9 X 10.1
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 32 SPECIAL
13. CLEANING 1-C CAPS/PLUGS: NAS847
MIL-STD-2073-1 2-C 1 WRAP: MIL-PRF-121, TY II, SIZE: 10 X 10
14. DRYING 3-D BLOCKING/BRACING: MIL-STD-1186
MIL-STD-2073-1 4-D CUSHIONING: ASTM-D4727, TY CF, CL DOM, VAR SW,
15. PACKING
GR 275
5-E 1 CONTAINER: ASTM D5118, ST FOL, TY CF, CL DOM,
a. LEVEL A VAR SW, GR 275, SIZE: 18-5/8 X 4-1/4 X 31-3/8
MIL-STD-2073-1 & NOTE B 6 1 BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 26 X 40
b. LEVEL B 7-F 1 WRAP: A-A-3174, SIZE: 50 X 39
NOT APPLICABLE 8-G 1 CONTAINER: ASTM D6880, CL 2, ST 4 (MODIFIED),
16. MARKING SIZE: 32-1/2 X 19-3/8 X 5-1/8
MIL-STD-129
17. NOTES/DRAWING
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER
SPECIFICATION.
B. SEAL ALL OPENINGS TO THE INTERIOR OF THE ENGINE OIL COOLER WITH CAPS/PLUGS OF THE APPROPRIATE
SIZE.
C. APPLY A SINGLE WRAP TO THE END OF THE OIL COOLER AS SHOWN ON PAGE 3. SECURE WITH TAPE.
D. SEE PAGES 2 AND 3.
E. CONTAINER CLOSURE SHALL BE IN ACCORDANCE WITH THE APPLICABLE METHOD OF ASTM-D1974.
F. APPLY OVERWRAP AROUND THE SEALED BAG TO PREVENT THE BAG FROM TEARING. SECURE THE WRAP WITH
ASTM-D5486.
G. CONTAINER IS CONSTRUCTED OF ALL 1 INCH THICK NOMINAL LUMBER AND IS MODIFIED TO INCLUDE BEVELED
SKIDS.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved -BM
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
E9AR106-001 (02978) ENGINE OIL COOLER ASSY, LH
2. CODE IDENT
19207
3. SPI NO.
AK14246731
4. NATIONAL STOCK NUMBER
2930-01-424-6731
5. DATE OF DRAWING
25 AUG 2025
6. REVISION
B
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved -BM
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
E9AR106-001 (02978) ENGINE OIL COOLER ASSY, LH
2. CODE IDENT
19207
3. SPI NO.
AK14246731
4. NATIONAL STOCK NUMBER
2930-01-424-6731
5. DATE OF DRAWING
25 AUG 2025
6. REVISION
B
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3 Pages
SPECIAL PACKAGING INSTRUCTION
File details come from the government source that posted it. Updated .